Error occurred while downloading files from Administration Server...
Hi guys,
If i already have my application deployed and exploded in ../tmp/_WL_user , when I restart the managed server it will try to download again the files from the upload directory in the Administration Servers? (I'm using stage mode).
Sometimes I got the following error:
Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from Administration Server for deployment request "0". Underlying error is: "null"
and I already have the war exploded in /tmp/_WL_user
the staging mode is not only for the first deployment? when i don't have the war exploded in /tmp/_WL_user?
I've some confusion related to the process or deployment/startup of the managed servers.
Thanks
Hi,
when you get following error * DeploymentService:290066 * then that means
A service on the machine is preventing the WebLogic Server remote instance from downloading the configuration file. This can be Hosts Intrusion Prevention (HIPS) agents or any other agent causing this issue.
Disable the agent interfering with the download process to fix this issue.
Regards,
Kal
Similar Messages
-
Hi this message appears after 2 hours downloading Mavericks in App Store :
an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
Same with "CMD + R"
Help...It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data. -
"An error occurred while extracting files from the package "BaseSystem.pkg".
Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB totalIt sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data. -
Error in PDF Conversion while downloading file from application server
Hi,
I am facing a problem in which i have to download file from application server which is a PDF file (output of SAP Script). I am downloading this file using following code in BSP technology:
* event handler for data retrieval
EMPCD = REQUEST->GET_FORM_FIELD( 'emp' ).
MONTH = REQUEST->GET_FORM_FIELD( 'mn' ).
YEAR = REQUEST->GET_FORM_FIELD( 'yr' ).
W_IND = 'N' .
DATA : wa_zform16 type zform16.
DATA : file_path type string.
DATA : l_pdf_len type string.
DATA STR TYPE STRING.
DATA: OUTPUT TYPE STRING ,
L_XSTRING TYPE XSTRING ,
APP_TYPE TYPE STRING.
DATA: PDF_TABLE TYPE RCL_BAG_TLINE.
DATA PHY_NAME_OUT TYPE SAPB-SAPPFAD.
concatenate '/usr/sap/put/form16/' EMPCD '_' YEAR '.PDF' into file_path
*PHY_NAME_OUT = '/usr/sap/put/form16/01000200_2007.PDF'.
PHY_NAME_OUT = file_path.
OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING default.
IF SY-SUBRC IS INITIAL.
DO.
READ DATASET PHY_NAME_OUT INTO STR.
IF SY-SUBRC IS INITIAL.
CONCATENATE
OUTPUT
STR
CL_ABAP_CHAR_UTILITIES=>CR_LF
INTO OUTPUT.
ELSE.
EXIT.
ENDIF.
ENDDO.
APP_TYPE = 'APPLICATION/PDF'.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
TEXT = OUTPUT
MIMETYPE = 'APPLICATION/PDF'
* MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
IMPORTING
BUFFER = L_XSTRING.
CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
EXPORTING
OBJECT_S = L_XSTRING
CONTENT_TYPE = APP_TYPE
CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
RESPONSE = _M_RESPONSE
NAVIGATION = NAVIGATION.
Result of this code is : there is a pop up asking to open or save pdf format and process is complete, but i have problem in downloaded file.
At the time of creation i have put BMP image for signature in PDF file and it is working fine but when i upload that file in Application server and then download it with above used code it save the PDF file but when i open that file so whereever i have used signature that page gives error and could not display that scanned signature.
Can anyone please help me in this regard.
or is there any possibility from which i can download that file just like File transfer from BSP.
Keep in mind that i am using BSP technology so all GUI based function module to download file are not working.
waiting for your reply.....
Regards,
GaganHi Raja,
I have standard sap form for TDS Certificate on which i have include an BMP image for digital signature and download that script into pdf format.While i download that PDF looks ok but it is not working in BSP.
Regards,
Gagan -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very muchMucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
An error occurred while searching tasks from the SOA Server
While clicking task tab in self service page i am getting
"An error occurred while searching tasks from the SOA Server." even after sao server is up.http://host1:8001/soa-infra/ is down
I restarted soa server and found the soa changed to Running status after the below error in console
Nov 16, 2011 12:06:21 PM GMT+05:30> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
Truncated. see log file for complete stacktrace
I checked OIM log also after clicking the task tab and found below error in log
Error occurred while connecting to BPEL
[2011-11-16T14:59:02.703+05:30] [oim_server1] [ERROR] [] [oracle.iam.tasklist.agentry.task] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bb6ba2093960fbcc:-2164bc25:133aba77382:-8000-00000000000000a4,0] [APP: oim#11.1.1.3.0] javax.naming.NameNotFoundException: Unable to resolve 'TaskQueryService'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TaskQueryService'. Resolved '']; remaining name 'TaskQueryService'
[2011-11-16T14:59:02.703+05:30] [oim_server1] [WARNING] [] [oracle.iam.consoles.faces.mvc.common] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bb6ba2093960fbcc:-2164bc25:133aba77382:-8000-00000000000000a4,0] [APP: oim#11.1.1.3.0] oracle.iam.platform.canonic.base.NoteException: An error occurred while searching tasks from the SOA Server. -
latest apple extreme would not update software from 7.7 factory installed to 7.7.1. keep getting an error of "An error occurred while downloading the firmware"
airport utility showed me these screens. this time able to post figs. but was able to update the software after couple of resets
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5 -
Win 7 / System Update 4 "An error occurred while downloading packages" Please review LOG?
Team Lenovo,
I am having problem with TVSU 4.0 on a Windows 7 64 bit system where it gets to about 17-18% and consistently gives me "An error occurred while downloading packages"
I've made sure no firewalls are active. Am not using an Proxy servers and have turned off "automatically detect settings" in Internet Options. I've tried to uninstall and reinstall and no change. I've also tried to run as an Administrator and no luck either.
I reviewed the logs that are located at:
C:\Program Files (x86)\Lenovo\System Update\logs
I've highlighted in BOLD the entries below I feel may be the issue, but not sure how to resolve it. I did notice download.lenovo.com link when I try to reach it directly shows file not found???
[ThinkVantage System Update build: 2009-10-19 4.00.0024] 2/5/2011 4:13:45 PM
Info 2011-02-05 , 04:13:45
at Tvsu.Environment.EnvironmentManager..ctor()
Message: Starting Environment Manager...
Info 2011-02-05 , 04:13:45
at Tvsu.Nls.NlsResources..ctor()
Message:
The active language is: EN
The default language is: EN
The OS language is: EN
The language loaded type is: OS
Severe 2011-02-05 , 04:13:45
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Application runs with the framework: 2.0.50727.4952
Info 2011-02-05 , 04:13:45
at Tvsu.Engine.DataBase.InitializeDataBase()
Message: Initializing the DataBase from file: updates.ser
Warning 2011-02-05 , 04:13:45
at Tvsu.Gui.Util.Tools.get_SystemVendor()
Message: The vendor was resolved to THINK
Info 2011-02-05 , 04:14:11
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Creating a new Connection Settings Bean instance to Host: download.lenovo.com
Info 2011-02-05 , 04:14:11
at Tvt.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Direct connection found
Info 2011-02-05 , 04:14:11
at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean)
Message: Connection type set to DIRECT in ConnectionSettingsBean
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Task.Task.Start()
Message: The current process is:HelloProcess
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess HelloProcess
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess HelloProcess
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.DownloadHelpFile()
Message: The chm help file is already present in the system
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.Start()
Message: The test.properties file was not found, the normal Hello process will continue.
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.Start()
Message: HelloProcess Started
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Client level: HelloLevel_8_05_80
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_05_80.xml
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded to-> C:\Program Files (x86)\Lenovo\System Update\session\system\SSClientCommon\HelloLevel_8_05_80.xml
Info 2011-02-05 , 04:14:11
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Connection settings bean found for download.lenovo.com
Info 2011-02-05 , 04:14:11
at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean)
Message: Connection type set to DIRECT in ConnectionSettingsBean
Info 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.Start()
Message: UDF download status is -> Failed
Severe 2011-02-05 , 04:14:11
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Could't connect to the HelloServer, no UDF file was downloaded
Info 2011-02-05 , 04:14:11
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Running egather minimal.....
Info 2011-02-05 , 04:14:11
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting PROCESSING status.
Info 2011-02-05 , 04:14:11
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: /execute ia.exe /arguments -filename"""C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin""" -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory C:\Program Files (x86)\Lenovo\System Update\egather\ /type COMMAND /timeout 300000
Info 2011-02-05 , 04:14:11
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: FileName Path: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
Info 2011-02-05 , 04:14:14
at Tvsu.Egather.EgatherExecutor.ExecuteEgather(String fileOutput, String args)
Message: RC eGatherer: 0
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Process.HelloProcess.Start()
Message: MTM received from eGather: 4389AB8
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Data to be set in the Environment Manager to use with Quest:
QOS (Quest OS): Windows 7
QOSLang (Quest language): EN
MTM: 4389AB8
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PostProcess HelloProcess
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Task.Task.Start()
Message: The process HelloProcesshas been finished.
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Task.Task.StartExecution()
Message: PostTask
Info 2011-02-05 , 04:14:14
at Tvsu.Sdk.SuSdk.GetSystemProperties()
Message: Return the System Properties
Info 2011-02-05 , 04:14:14
at Tvsu.Sdk.SuSdk.GetApplicableUpdates(searchingFolderDelegate spd, showErrMsgDelegate sed)
Message: Get Applicable Updates
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Task.Task.Start()
Message: The current process is:HelpCenterQuestProcess
Info 2011-02-05 , 04:14:14
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess HelpCenterQuestProcess
Info 2011-02-05 , 04:14:14
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting DONE status.
Info 2011-02-05 , 04:14:14
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting PROCESSING status.
Info 2011-02-05 , 04:14:19
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Creating a new Connection Settings Bean instance to Host: www-03.ibm.com
Info 2011-02-05 , 04:14:19
at Tvt.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Direct connection found
Info 2011-02-05 , 04:14:19
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess HelpCenterQuestProcess
Info 2011-02-05 , 04:14:19
at Tvsu.Engine.Process.HelpCenterQuestProcess.LaunchEgather()
Message: Launching Egather
Info 2011-02-05 , 04:14:19
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Running egather complete.....
Info 2011-02-05 , 04:14:19
at Tvsu.Engine.Process.HelpCenterQuestProcess.LaunchHelpCenterProcess()
Message: Launching HelpCenter
Info 2011-02-05 , 04:14:19
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: /execute ia.exe /arguments -filename"""C:\Program Files (x86)\Lenovo\System Update\egather\sysreco""" -silent -local -section SYSTEM_SUMMARY REGIONAL_SETTINGS SMBIOS_INFORMATION Firmware_Information Installed_Software SMBIOS_INFORMATION DEVICE_DRIVERS_AND_SERVICES IDE_DEVICE_INFORMATION DEVICE_MANAGER_SETTINGS -p device_manager enable_hardwareid /directory C:\Program Files (x86)\Lenovo\System Update\egather\ /type COMMAND /timeout 300000
Info 2011-02-05 , 04:14:19
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: FileName Path: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
Info 2011-02-05 , 04:14:19
at Tvt.Helpcenter.Quest.QuestResponse.ConnectToQuest()
Message: Setting QuestResponse Path to: C:\Program Files (x86)\Lenovo\System Update\session\QuestResponse.xml
Info 2011-02-05 , 04:14:19
at Tvt.Helpcenter.Quest.QuestResponse.ConnectToQuest()
Message:
Quest Url: https://www-03.ibm.com/pc/support/services/questquery/pc_support_services_questquery_viewer_EDAPortB...
Info 2011-02-05 , 04:14:19
at Tvt.FileDownloader.DirectFileDownloader.StartDownload()
Message: Uri to download-> https://www-03.ibm.com/pc/support/services/questquery/pc_support_services_questquery_viewer_EDAPortB...
Severe 2011-02-05 , 04:14:19
at Tvt.FileDownloader.DirectFileDownloader.StartDownload()
Message: Unexpected exception setting the request-> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Header/><soapenv:Body><p869:getDescriptors xmlns869="http://www.ibm.com/xmlns/prod/pc/esupportda/binding/20041013"><agent>TVSUWeb/1</agent><queryValue>4389AB8</queryValue><os>Windows 7</os><osLanguage>EN</osLanguage></p869:getDescriptors></soapenv:Body></soapenv:Envelope>
Exception:
Message: The underlying connection was closed: An unexpected error occurred on a receive.
Type: System.Net.WebException
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Tvt.FileDownloader.DirectFileDownloader.StartDownload()
Info 2011-02-05 , 04:14:19
at Tvt.Helpcenter.Quest.QuestResponse.ConnectToQuest()
Message: Exception setting the request content
Info 2011-02-05 , 04:14:19
at Tvsu.Engine.Process.HelpCenterQuestProcess.GetQuestResponse(String currentUrl)
Message: Tvt.FileDownloader.DownloadException
Exception setting the request content
at Tvt.FileDownloader.DirectFileDownloader.StartDownload()
at Tvt.Helpcenter.Quest.QuestResponse.ConnectToQuest()
at Tvt.Helpcenter.Quest.QuestResponse.RunQuest(String URL, String Mtm, String Os, String Oslanguage, String ClientLevel, ConnectionSettingsBean connbean, String xmlpath, String[] Certificates)
at Tvsu.Engine.Process.HelpCenterQuestProcess.GetQuestResponse(String currentUrl)
Exception:
Message: Exception setting the request content
Type: Tvt.FileDownloader.DownloadException
at Tvt.FileDownloader.DirectFileDownloader.StartDownload()
at Tvt.Helpcenter.Quest.QuestResponse.ConnectToQuest()
at Tvt.Helpcenter.Quest.QuestResponse.RunQuest(String URL, String Mtm, String Os, String Oslanguage, String ClientLevel, ConnectionSettingsBean connbean, String xmlpath, String[] Certificates)
at Tvsu.Engine.Process.HelpCenterQuestProcess.GetQuestResponse(String currentUrl)
Severe 2011-02-05 , 04:14:19
at Tvsu.Engine.Process.HelpCenterQuestProcess.LaunchHelpCenterProcess()
Message: An error ocurred while contacting the help center
Exception:
Message: Exception setting the request content
Type: Tvt.FileDownloader.DownloadException
at Tvt.FileDownloader.DirectFileDownloader.StartDownload()
at Tvt.Helpcenter.Quest.QuestResponse.ConnectToQuest()
at Tvt.Helpcenter.Quest.QuestResponse.RunQuest(String URL, String Mtm, String Os, String Oslanguage, String ClientLevel, ConnectionSettingsBean connbean, String xmlpath, String[] Certificates)
at Tvsu.Engine.Process.HelpCenterQuestProcess.GetQuestResponse(String currentUrl)
at Tvsu.Engine.Process.HelpCenterQuestProcess.LaunchHelpCenterProcess()
Info 2011-02-05 , 04:14:19
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PostProcess HelpCenterQuestProcess
Severe 2011-02-05 , 04:14:19
at Tvsu.Engine.Task.Task.StartExecution()
Message: An error occurred while the task: ApplicableUpdatesTask executed the process: HelpCenterQuestProcessthe message from exception isException setting the request content
Exception:
Message: Exception setting the request content
Type: Tvt.FileDownloader.DownloadException
at Tvsu.Engine.Task.Task.Start()
at Tvsu.Engine.Task.Task.StartExecution()
Info 2011-02-05 , 04:14:20
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting FAILED status.
Info 2011-02-05 , 04:14:20
at Tvsu.Gui.GUIController.ShowErrorMessage(Exception e)
Message: Error while downloading packages.
Exception:
Message: Exception setting the request content
Type: Tvt.FileDownloader.DownloadException
at Tvsu.Engine.Task.Task.StartExecution()
at Tvsu.Sdk.SuSdk.GetApplicableUpdates(searchingFolderDelegate spd, showErrMsgDelegate sed)
at Tvsu.Gui.Util.ProgressThread.InitSearch()
Info 2011-02-05 , 04:14:20
at Tvsu.Gui.FlowScreens.Messages.ShowMessage(String message, String title, String mastheadtext, MessageType t, Boolean check, IWin32Window owner)
Message: Showing ERROR Message: < An error occurred while downloading packages.Thank you for the reply. I already have NET. Framework 4.x installed and I stil have the same problem.
I looked at the logs again and I believe the issue is that I can not download this file:
https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_05_80.xml
Can someone try that link and see if they get anything? I keep getting in my browser "file not found".
at Tvsu.Engine.Process.HelloProcess.Start()
Message: HelloProcess Started
Info 2011-02-07 , 09:23:47
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Client level: HelloLevel_8_05_80
Info 2011-02-07 , 09:23:47
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_05_80.xml
Info 2011-02-07 , 09:23:47
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded to-> C:\Program Files (x86)\Lenovo\System Update\session\system\SSClientCommon\HelloLevel_8_05_80.xml
Info 2011-02-07 , 09:23:47
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Connection settings bean found for download.lenovo.com
Info 2011-02-07 , 09:23:47
at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean)
Message: Connection type set to DIRECT in ConnectionSettingsBean
Info 2011-02-07 , 09:23:47
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting PROCESSING status.
Info 2011-02-07 , 09:23:47
at Tvsu.Engine.Process.HelloProcess.Start()
Message: UDF download status is -> Failed
Severe 2011-02-07 , 09:23:47
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Could't connect to the HelloServer, no UDF file was downloaded -
Recent backups fail: "An error occurred while copying files to the volume."
I recently moved to a new place and set up Time Capsule as a bridge. Backups were working fine for the first couple days but then, out of the blue, I got a message that said the password I entered for Time Capsule was incorrect. I entered the correct password and hit OK. Time Machine was able to connect but now backups fail with this error: "Unable to complete backup. An error occurred while copying files to the backup volume."
Time Machine indicates it is "preparing backup" for a few minutes, then sits at "zero of __MB completed" for a long while, finally starts backing up and gets to the end but then fails. Console indicates "unexpected reply from backup server; ignored."
None of these attempts have fixes my problem:
--I have deleted my TC passwords in Keychain Access.
--I have tried downloading the latest Airport Utility and re-entering the TC disk's password in both Airport Utility and in Time Machine preferences.
--I have restarted my computer and unplugged & plugged back in TC.
My Internet connection works fine; TC's light is solid green. I can enter Time Machine to restore backups without a problem. The backups just fail every time now. Any ideas?The problem really isn't the speed of the backup; it's done in 5-10 minutes, but each time it finishes, TM reports it has failed. I don't believe plugging it in overnight or letting TM try over and over will fix the problem. I've tried to manually start backups a number of times, and have let TM try to start and complete them on its own but they consistently fail.
It would be an awful shame if I had to delete my old backup--I bought the Time Capsule for the specific purpose of having backups that go back months and I don't want to lose what I've already backed up. -
An error occured while publishing file
I have not been able to publish using iWeb 1.1.1 or 1.1.2. I receive the message - "An error occured while publishng file "/web/sites/iWeb/etc..
I have been able to publish using iWeb 1.0 without any problem. But as soon as I upgrade - the publish feature of iWeb ceases to work. And so I cannot use some of the new iWeb features.
I have read the discussion boards for the last 24 hours without finding a solution. The most promising solution I saw was from "untergeek" who discovered that there are several HTTP request methods used by iWeb that are not supported by filtering/proxy software.
But I am unsure how I configure settings in OS X to address this. Does anybody have a solution to this?Like you I was getting a bit frustrated... however I think I have worked it out now.
What seems to happen is that when you publish to .Mac it is sent directly to the .Mac server. Then your local iDisk synchronises with the .Mac server. In effect this means that the version published to the server is downloaded to your hard disc and stored in the iDisk folder.
The problem with publishing seems to happen while the iDisk is synchronising. All you get at that time is the publishing errors. However, if you wait until it has finished synchronising then the publishing to .Mac seems to go as smoothly as anything.
I'm not sure if this is what Apple intended. However, it all makes sense now.
The only real problem is if you want to make lots of changes quickly, since you cannot upload these until the process is finished.
To see if your iDisk is synching, double click the iDisk icon on your desktop an dlook at the bottom of the window that opens. If files are being transferred you can see the progress bar, and the number of files being copied.
Another way to find out it if it is actively synching is to look at the iDisk icon in the sidebar in any Finder window. If the little double-arrowed symbol is spinning then it is being synched. If it is still then it is finished. If you want to force it to do a synch now, just click that symbol once, sit back and wait for it to be done.
My only real "complaint" with the iDisk is that the synching process is somehwat slow (even though I'm on 2Mb broadband)
Hope this helps
iMac G5 Mac OS X (10.4.4) -
How to download files from Application Server of Unix o.s to local director
Hi All,
I am trying to download files from Apllication server of Unix operating Systems to local file in excel sheet format using a z-program.but whenever I am trying to use OPEN dataset ........
it is showing sy-subrc = 8.
Can I have any clew please.
Thanks in advance,
Regards,
AMEER.Hi Sreekanth,
Thanks a lot for quick reply.I have to download that files from z-program only. I am giving you my code below.
*& Report ZTRAK_DOWNLOAD *
REPORT ZTRAK_DOWNLOAD MESSAGE-ID ZCT .
SELECTION-SCREEN BEGIN OF BLOCK DOWNLOAD WITH FRAME TITLE TEXT1.
PARAMETERS :
SERDIR LIKE RLGRAP-FILENAME DEFAULT '/usr/trak',
LOCDIR LIKE RLGRAP-FILENAME DEFAULT 'C:\Trak'.
SELECTION-SCREEN END OF BLOCK DOWNLOAD .
SELECTION-SCREEN BEGIN OF BLOCK INFO2 WITH FRAME.
SELECTION-SCREEN COMMENT 1(79) TEXT2.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT 1(79) TEXT3.
SELECTION-SCREEN END OF BLOCK INFO2 .
SELECTION-SCREEN BEGIN OF BLOCK INFO3 WITH FRAME.
SELECTION-SCREEN COMMENT 1(79) TEXT4.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT 1(79) TEXT5.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT 1(79) TEXT6.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(79) TEXT7.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN COMMENT 1(79) TEXT8.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(79) TEXT9.
SELECTION-SCREEN END OF BLOCK INFO3.
*- Internal Table to output data in Excel
DATA: BEGIN OF tab_excel OCCURS 0,
col1(50),
col2(132),
col3(255),
col4(100),
col5(100),
col6(50),
COL7(60),
col8(30),
col9(30),
col10(30),
col11(20),
col12(15),
col13(15),
END OF tab_excel.
DATA: FILE LIKE RLGRAP-FILENAME .
DATA: W_DATASET(80).
INITIALIZATION.
TEXT1 = 'Download Reports'.
TEXT2 = 'The Program downloads the reports generated by Trak'.
TEXT3 = 'Utility from Server to Local PC.'.
TEXT4 = 'Check the following before executing the Program.'.
TEXT5 = ' 1. A valid Server path is provided.'.
TEXT6 = ' 2. A valid Local PC path is provided.'.
TEXT7 = ' 3. Local PC has 10 MB free space.'.
TEXT8 = 'The report can be executed in the forground.'.
TEXT9 =
'The report should be executed after execution of Transaction TRAK'.
AT SELECTION-SCREEN.
IF SERDIR EQ ''.
MESSAGE E001(ZCT).
ENDIF.
IF LOCDIR EQ ''.
MESSAGE E002(ZCT).
ENDIF.
START-OF-SELECTION.
Download ABAP Development Summary Report
FILE = '\ABAP_Report_Developments.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAP_Report_Developments.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download BDC Development Report
FILE = '\BDC_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/BDC_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Development Summary Report
FILE = '\Developments_Summary_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Developments_Summary_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Enhancement Development Report
FILE = '\Enhancement_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Enhancement_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download field exit Development Report
FILE = '\Field_Exit_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Field_Exit_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Frequency & Purpose Report
FILE = '\Frequency_And_Purpose_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Frequency_And_Purpose_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Group Developments Report
FILE = '\FunctionGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Module Developments Report
FILE = '\FunctionModule_Developments_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionModule_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
FILE = '\Include_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Include_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download UserGroup Developments Report
FILE = '\UserGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Modified_Standard_SAP_Objects_Report
FILE = '\Modified_Standard_SAP_Objects_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Modified_Standard_SAP_Objects_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
*FILE = '\Include_Developments_Report.XLS'.
*CONCATENATE LOCDIR FILE INTO FILE.
*W_DATASET = '/Include_Developments_Report.dat'.
*CONCATENATE SERDIR W_DATASET INTO W_DATASET.
*PERFORM INIT.
Download SAP Script Developments Report
FILE = '\SAP_Scipt_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/SAP_Scipt_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Transaction Developments Report
FILE = '\Transaction_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Transaction_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download User Exits Developments Report
FILE = '\UserExits_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserExits_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download ABAP Query Developments Report
FILE = '\ABAPQuery_Developments_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAPQuery_Developments_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Functional Area Developments Report
FILE = '\FunctionalArea_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionalArea_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
MESSAGE S003(ZCT) WITH LOCDIR.
END-OF-SELECTION.
This routine checks whether file exists if yes downloads it to
the Local PC
FORM INIT.
OPEN DATASET W_DATASET FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
READ DATASET W_DATASET INTO tab_excel.
APPEND tab_excel.
CLEAR tab_excel.
ENDDO.
PERFORM DOWNLOAD_FILE.
ENDFORM.
This routine downloads the data in an XL format on local PC
FORM Download_File .
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = tab_excel
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF sy-subrc <> 0.
message ''. " Error in file transfer
ELSE.
CLEAR TAB_EXCEL.
REFRESH TAB_EXCEL.
FILE = ''.
W_DATASET = ''.
ENDIF.
ENDFORM.
I have created those files in Application Server running in another z-program in background mode.Then I am trying to download those files using above the program.I am creating those trak/Trak files manually and I can able to see those files in A.S level.But when downloading the same files I am facing the problem.
regards,
Ameer -
An error occurred while copying files.
I am backing up a MacBook Pro Retina display to a 3TB TC and six days ago the backups just stopped and I get the following message:
Time Machine couldn't complete the backup to Time Capsule.
An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk.
I looked at the log in Time Machine Buddy and it shows the following:
Starting automatic backup
Attempting to mount network destination URL: afp://Max%20Evjen;AUTH=SRP@Endor._afpovertcp._tcp.local./Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Max%20Evjen;AUTH=SRP@Endor._afpovertcp._tcp.local./Data
Disk image /Volumes/Data/Max’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to /dev/disk5s2: /Volumes/Time Machine Backups/Backups.backupdb
Deep event scan at path:/Users/HippieMBAMA/Pictures/iPhoto Library/Database/apdb reason:contains changes|must scan subdirs|fsevent|missed reservation|file event|
Running event scan
Finished scan
Not using file event preflight for Macintosh HD
Found 3060 files (1.13 GB) needing backup
zero date not marked for delete: /Volumes/Time Machine Backups/Backups.backupdb/Max’s MacBook Pro/2015-02-20-171344
3.37 GB required (including padding), 1.52 TB available
Stopping backup.
Error: (-43) SrcErr:NO Copying /Users/HippieMBAMA/Library/Mail/V2/[email protected]/[Gmail].mbox/All Mail.mbox/86E53377-3EAB-46ED-ADF7-46E0C68CD404/Data/2/6/2/Attachments/262783 to /Volumes/Time Machine Backups/Backups.backupdb/Max’s MacBook Pro/2015-02-26-140223.inProgress/A4533EFE-AAE4-4EDD-A542-1BDD6672E951/Macintosh HD/Users/HippieMBAMA/Library/Mail/V2/[email protected]/[Gmail].mbox/All Mail.mbox/86E53377-3EAB-46ED-ADF7-46E0C68CD404/Data/2/6/2/Attachments
Copied 1358 items (15.1 MB) from volume Macintosh HD. Linked 25141.
Copy stage failed with error:11
Backup failed with error 11: 11
Ejected Time Machine disk image: /Volumes/Data/Max’s MacBook Pro.sparsebundle
Ejected Time Machine network volume.
I tried going back to the gmail settings to ensure the trash settings were set to SHOW and SHOW IN IMAP, and I unchecked "Store deleted messages on the server" for the gmail account in the mail.app, as I was also getting messages about not being able to move messages to trash(null), and I thought that might be the issue, but while that fixed the mail issue, it did not fix the Time Machine issue.
Any help with this would be greatly appreciated.The TC in and of itself is running ok.. otherwise you would not have internet.. so the issue is the OS in the computer.. however the combo is worse than the sum of the parts.. ie Somehow TC is less reliable with Yosemite than it would otherwise be..
here is the normal fix list.. but it is far from foolproof.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
The backup was not performed because an error occurred while copying files
One Time Capsule, Two MacBook's, OS10.6.6
One MacBook can backup no problem, The other cannot backup says: the backup was not performed because an error occurred while copying files to the backup disk.
Using a Time Machine Buddy widget gives:
Starting standard backup
Attempting to mount network destination using URL: afp://Rachel%[email protected]/Data
Mounted network destination using URL: afp://Rachel%[email protected]/Data
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data/Rachel Feuchtwang’s MacBook.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
No pre-backup thinning needed: 4.70 GB requested (including padding), 721.52 GB available
Indexing a file failed. Returned 200 for: /Applications/Dashboard.app, /Volumes/Time Machine Backups/Backups.backupdb/Rachel Feuchtwang’s MacBook/2011-01-12-115852.inProgress/F82EB140-616F-4213-9B4A-072C2C98B556/MAC/A pplications/Dashboard.app
Aborting backup because indexing a file failed.
Stopping backup.
Copied 5 files (84 bytes) from volume MAC.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Who would be so kind to point me in the direction to make thsi work again?
Thanks! HugoThis could very well have to do with ACLs.
I bumped into the same problem:
5/8/11 10:43:22 PM com.apple.backupd[7126] Error: (-41) SrcErr:NO Copying /Users/SA/Public/Drop Box/HandBrake.app/Contents/Frameworks/Sparkle.framework/Versions/A/ Resources/de.lproj/SUAutomaticUpdateAlert.nib/classes.nib to /Volumes/Local Backup/Backups.backupdb/Server/2011-05-08-221524.inProgress/88ACE716-0660-44C8- A128-CF01046FC2F8/Macintosh HD/Users/SA/Public/Drop Box/HandBrake.app/Contents/Frameworks/Sparkle.framework/Versions/A/ Resources/de.lproj/SUAutomaticUpdateAlert.nib
Using DD or CCC is no option for me, I don't want downtime and I want incremental backups. So I started to investigate.
I repartitioned my external Time Machine drive, did the backup again. It didn't work. Then I blocked the culprit file mentioned in the logs from being backed up with TM. That helped, only to find that a bit later it found another file with issues.
So i looked at the files an found they had ACLs on them that somehow prevented them from being copied.
SOLUTION:
remove the ACL from the file.
If you want to remove all ACLs in a directory, use Terminal and navigate to that directory. Then issue this command:
sudo echo | sudo chmod -R -E ./*
If you would like to remove ACLs from a single file or package (e.g. an application), issue this:
sudo echo | sudo chmod -R -E <nameoffile>
You might have to this several times since there might be multiple files affected. Unlike previous solutions, this one does not require you to delete the file.
I got the command to remove ACLs from http://osxadmin.blogspot.com/2008/01/chmod-acl-removal.html -
Error occured while tranferring file in support pack
I am Applying support pack in my QAS Server. When I have apply Support Pack of ABAP from SAPKA70009 to SAPKA70012 . It proper work. But when I am applying SAPKA70013
via Frontend it give messege.
An error occured while tranferring file
'E;\sapdownload\SupportPack\KA70013.CAR'from the
frontend computer.
In my PC from where i am applying Patch . All drive space is ok and In my QAS server all file system is OK.
Where is the problem.
Thanks
manuquality:qasadm 4> SAPCAR -xvf KA70013.CAR
processing archive KA70013.CAR...
x EPS/in/CSN0120061532_0027618.ATT
x EPS/in/CSN0120061532_0027618.PAT
what is the location of this extracted file? just move the extracted file into /usr/sap/trans/EPS/in then
Now When I login in QAS server in Client 000 via DDIC.
When I run SPAM and Load package from Application Server
It ask SPAM Confirm Load
path of EPS inbox :/usr/sap/trans/EPS/in
Do you want to Upload OCS package from EPS inbox
I press Yes
Regards
Subhash
Maybe you are looking for
-
Windows Vista 64 bit and Treo 755p
Hello, I am wondering if the latest software update will allow me to sync using HotSync and a cable. When I got my 755 it said that it was not compatible with my new computer that has the 64 bit Vista. Is this going to be fixed eventually or should
-
Trying to replace a failed hard drive Macbook Pro 17 2011
So, my Hitachi 750 GB HD just failed on my Macbook Pro 17" (2011). I bought a new Travelstar 1 TB 7200 RPM HD and have installed it without an issue (very simple to do). BUT, I do not have any install disks to use to install the OXs. This laptop o
-
[SOLVED] Cannot save things in Firefox
This is probably one of the wierdest problems that I've seen. For whatever reason, I am unable to open a save dialog in Firefox. I can't save images, web pages, etc... However, I've noticed that when I try to open a save dialog and then switch to vc/
-
Aix users security problem with remote brtools
I'm having a separate instance for my database and central instance. Both instances are running on AIX 5.3. From my understanding, the DB13 dbcheck and dbverify are done by executing brtools at database instance form central instance. This is done by
-
How do I get pictures from photoshop to an email?