Error : profit center is locked for controlling area

Hi Experts
profit center is locked for controlling area. Like this error is comning while doing MIRO, excise invoice. Please let me know the solution. Profit center mentioned in material master is different.

Dear,
This profit center is locked in its master under Indicators tab. Use transaction KE52 to unlock it if you want.
Your concern to Profit Center being picked up is different then Material Master then use transaction OBBH and notice the substitution assigned to your compay code for call up point 2. Then use transaction GGB1 and check any profit center derivation is done.
Regards,
Chintan Joshi

Similar Messages

  • Profit center not found in controlling area

    Hello all,
    While trying to change the wbs element of a PO in ME22N, I am getting the error message "Profit center XXXX not found in controlling area".
    Do any one hava an idea how to fix this problem?
    Thanks in advance for your help,
    Soumaya

    Check whether the PC Hierarchy has been defined or not in KCH5N / KCH6N for your Controlling area.
    Single PC - Check in KE53.
    If not, you need to define the PC Standard Hierarchy
    Thanks

  • Profit Center Is not in Controlling Area BP01

    Hi
    I am getting the below error. Please help me
    Profit center 2100 is not created in Controlling Area BP01
    Message no. FAGL_ORG_UNITS001
    Thanks
    Surya

    Hi,
    It is what it's said: there is no profit centre in the CO area defined. You have to create one (KE51) or check if you are using the right one.
    Regards,
    Eli

  • Why profit center is created at controlling area leve and cost center is not

    Hi All,
    I want to know why we create profit center at controlling area level i.e., a profit center can be used by multiple company codes under that controlling area. While cost center is at company code level as in one cost center can only be used in one company code.
    Please explain the logic behind this design in SAP and in real business scenarios.
    Regards,
    Satan

    Hi,
    Cost centres (and other CO objects, e.g. internal order, WBS, etc.) are part of Cost Accounting component of SAP Controlling domain (CO). Profit centres are part of Enterprise Controlling (EC) domain, namely of EC-PCA. So, these two objects are not even belonging to the same domain and have, therefore, different perspective of business functionality. SAP has created reporting objects on different level of control: business areas on client level, cost centres - on company code level, profit centres - on controlling area level, etc. All this is a part of system design in functional prism of system's evolution.
    Of course, technically speaking, one could have created profit centres on company code level or vice versa, cost centres on controlling area level, but it would have provoked similar questions.
    Regards,
    Eli

  • Error - control indicators for control area do not exist

    Hi All,
    When I am trying to hire a person and entering his personal data, I am getting this error:
    control indicators for control area XXXX do not exist
    Please help

    I'm guessing this error is out of the Coding Block check for Controlling.. ie the function call COBL_EX_CODINGBLOCK_CHECK.. put a break-point inside this function call & verify if any settings are missing..
    ~Suresh

  • *Control indicators for controlling area U100 do not exist*

    Hi Friends
    Please solve the errro while makeing Sales order
    Error is
    Control indicators for controlling area U100 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2008 for controlling area U100.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area U100, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year

    Hi,
    GOTO t-code OKKP and check whether u have selected particular controller indicator like cost center accounting, activity,Profit center , Profitability analysis. Select from this indicator which you required.
    Regards,
    Sreekanth

  • T-CODE MB1C:Control indicators for controlling area 0002 do not exist?

    Dear all.
    I want to use the T-CODE MB1C to increase one material's Inventory and the Movement Type was 501.But went I input the material and the quantity,the sap show the error message like below.Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.
    error message:
    Control indicators for controlling area 0002 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2007 for controlling area 0002.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 0002, fiscal year 2007 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.

    Hi!
    Please try the following.
    T.code: OKKP, select controlling area 0002 and choose details. There in field "CCtr Std. Hierarchy", some input should be maintained. If that field is blank, then input the value as " STD-HIER" and save it.
    Now select the same controlling area(0002) and double click on "Activate components/cost indicators" tab. Select " New entries" and input fiscal year 2007. In the same screen, under activatecomponents, select " 1 component activate" for "cost centers, order management, profit analysis and Acty-based costing".
    Also tick the check boxes of " Profit center aactg, projects, sales orders, cost objects".
    Under other indicators, tick the check box " All currencies" and save it.
    Now try your requirement. I hope that error should not come this time.
    Kindly let me know the status.
    Thanks & Regards,
    Gopi Chand.

  • How to change standard PCA hierarchy for Controlling Area?

    Dear all,
    I'd like to change standard PCA hierarchy for Controlling Area. System doesn't allow me to do this with the following message:
    =====================================
    Standard hierarchy CIS for COAr 0700 already contains profit center(s)
    Message no. KM160
    Diagnosis
    You wish to change the standard hierarchy of a controlling area, however, profit centers have already been assigned to the hierarchy. For this reason, you may not change the standard hierarchy for this controlling area.
    =====================================
    How can I change it?

    I will clarify the business requirements behind this request.
    We are currently implementing PCA for a customer. However, technically, PCA was already switched on several years ago and it was used for some not-really-accounting customer functionalities (Z* reports) .
    So, currently the PCA hierarchy is total mess. No logical heirarchy, a lot of weird profit centers... Not posibly to use this for segment reporting at all. And I would like to sort this out for this project.
    Is it possible to reorganize current standard hierarchy? Remove profit centers and profit center groups out of there? Forbid postings?

  • Control indicators for controlling area XYZ1 do not exist". Pls help.

    While Posting to the Customer Downpayment thru t code F-29. following error occured "Control indicators for controlling area XYZ1 do not exist". Pls help.

    Hi,
    You forgot to maintain control indicators for the controlling area. Go to OKKP transaction, select the controlling area and maintain the indicators...
    Regards,
    Eli

  • Reg. Control indicators for controlling area NCCP do not exist

    Dear Experts
    I want to create purchase requisition (ME51N) then the following error occured. Pls help me.
    Control indicators for controlling area NCCP do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2008 for controlling area NCCP.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area NCCP, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
    Thanks
    Rajakumar.K

    Hi
    Goto SPRO-> IMG-> Controlling-> General Controlling-> Organization-> Maintain Controlling area->
    Select your controlling area & Click on Activate components/control indicators & Activate the compnnents
    Cost Centers
    Order Management
    ProfitAnalysis
    Acty-Based Costing
    Select the Check boxes below them & Save the details
    This should solve your issue
    Thanks & Regards
    Kishore

  • Control indicators for controlling area donot exist"

    I have created one po order for which I am getting the error as"control indicators for controlling area donot exist"
    Can some body tell me me how to solve ths issue and wt settings needs to be done in IMG
    Regards
    Chitra

    Go to OKKP Transaction code.
    Select your controlling area and double click on activate componentes/control indicators (Left side).
    Now, maintain Fiscal year... and Activate cost centers etc., and save the data.

  • Control indicators for controlling area BP01 do not exist

    Dear Experts/Gurus,
    I am getting the following error message "Control indicators for controlling area BP01 do not exist" while trying to upload employees HR Master data in PA40.
    Please let me know how to sort out this issue asap.
    Rgds,
    Vikrant

    Hi Vikrant,
    Go to OKKP -> controlling area BP01 -> "Activate component/control indicator"
    Press new entry -> Insert Fiscal year for 2009.
    You may wanna consult your CO guys.
    Regards,
    Dilek

  • Control indicators for controlling area 8010 do not exist

    Dear Experts,
          When i use PA30 to input some personnel data  startdate is 2003.11.25, occurs error:
    Control indicators for controlling area 8010 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2003 for controlling area 8010.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 8010, fiscal year 2003 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year
    Can you tell me how to configure this setting?
    Best Regards,
    Merry
    Edited by: merry zhang on Dec 7, 2009 8:24 AM

    Hi,
    Goto transaction OKKP Check select Activate indicator and see whether for that year control indicator are maintained.
    Regards,
    Sreekanth

  • Control indicators for controlling area 1573 do not exist

    Hello All
    Control indicators for controlling area 1573 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2009 for controlling area 1573.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 1573, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year
    1573 is my company code as well as my controlling area
    This is happening in my sandbox server from to day morning only as it looks like somebody has tampered the settings which doesnot allowing me to create a sales order itself to do any testing
    I am totally handicapped and without solving this error i will not be able to proceed at all
    This error has come for the first time whilre creating the sales order
    Waiting for your valuable inputs
    Regard
    Raja

    Hi,
    Please go to OKKP and see the validity period of controlling area FROM year to TO year.
    OKKP
    Select controlling area
    Double click
    Activate components/control indicators.
    I believe somebody must have deleted the year.
    You need to enter the control indicators FROM year to TO year.
    Please let me know if you still have issues.
    Regards,
    Ravi

  • Control indicators for controlling area

    Hello,
    I am new in PTP process. While creating purchase requisition, I am getting following error(Detailed error message, diagnosis and procedure to resolve(given by SAP) is attached below). Can somebody please tell me how to resolve this problem step by step?  
    Error Message-
    Control indicators for controlling area AB01 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2009 for controlling area AB01.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area AB01, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
    Regards,
    Milind Dumbre

    Hi,
    Go to OKKP Transaction code.
    Select your controlling area and double click on activate componentes/control indicators (Left side).
    Now, maintain Fiscal year... and Activate cost centers etc., and save the data.
    regards
    Anand.

Maybe you are looking for

  • Enter Price for Item

    Hi, On SRM at GRV I am getting a warning message that I must enter the price for the Goods receipt, when the PO I am referencing already has a price. Please assist me to know where this message is maintained, and the determination of whether the GRV

  • Alert with IDOC error message

    Hi All We are configuring IDOC monitoring process in BPIM of Solution Manager. One of our requirement is Alert mail should include IDOC number and error message. Example IDOC Number: 8358000 Status: 51 Message:  Payment term not found Could you pleas

  • Can't find Javac.exe

    I'm new to Java (presently taking a class). I'm very confused and not getting too far. I'm running Win XP and have downloaded the latest version of Java J2SE1.4.0_01 (actually because of repeated problems, I've uninstalled and installed it a few time

  • Problem with WL6.0 IIS plug in

    I upgraded weblogic server from 4.51 to 6.0. I found out that WL6.0 IIS plug in resets a HTTP post request when the size of post data is over 4k. The below is my iisproxy.ini. It works fine wihe WL4.51. Is there any entry I need to add to iisproxy.in

  • How to make custom respository as a versioned repository

    hi all, how to make or convert custom respository as a versioned repository. and what is versined repository and why we are going for that, can anyone explain clearly, thanks and regards shya