Error rasing the engine
Hello everybody,
I use AquaLogic BPM 5.7 and I'm having problems trying to raise the engine that I created. When I try to raise it the following error appears:
Server has been aborted: Reason: No record is found in MIGRATION table. It must have the BUILD number of the installed version. The engine could not evaluate if an internal migration procedure is required. The engine will not start until the problem is solved. Please ask Fuego Support for assistance. fuego.server.exception.InconsistencyMigrationTableRuntimeException: No record is found in MIGRATION table. It must have the BUILD number of the installed version. The engine could not evaluate if an internal migration procedure is required. The engine will not start until the problem is solved. Please ask Fuego Support for assistance. at fuego.server.service.EngineConnectorService.checkMigration(EngineConnectorService.java:332) at fuego.server.service.EngineConnectorService.start(EngineConnectorService.java:227) at fuego.server.service.AbstractService.changeRunLevel(AbstractService.java:99) at fuego.server.service.AbstractService.setRunLevel(AbstractService.java:52) at fuego.fengine.ProcessServer.setRunLevel(ProcessServer.java:1452) at fuego.fengine.ProcessServer.startUpServices(ProcessServer.java:1684) at fuego.fengine.ProcessServer.startUp(ProcessServer.java:638) at fuego.fengine.ServerAdmin.main(ServerAdmin.java:158) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at fuego.boot.Loader.runAsMain(Loader.java:1595) at fuego.boot.Loader.run(Loader.java:1552) at fuego.boot.Loader.main(Loader.java:739)
Does anyone have any idea in how I can fix this? Help me please.
your installation seems to be messed up.
1. did you try to apply a patch?
2. is this the first time you've tried starting the engine? or did it suddently start misbehaving?
3. run a select * from fuego_migration in the FDI schema. is that table empty as well?
possible solution:
1. stop all bpm applications
2. insert the following value in the <<engine_schema>>.migration.build = 55309
3. insert the following values in the <<fdi>>.fuego_migration.build = 57002.
4. start bpm applications
A side-effect of this is that you might notice certain objects being changed in the DB. you can query for user_objects and see the created field to see if starting the bpm applications made changes to your schema.
Similar Messages
-
Hi all,
I'm getting this error when my engine starts. What can be happening? How can I avoid it?
fuego.transaction.DatabaseException: Se ha producido un error al acceder a la base de datos.
Detalle:Instrucción SQL: 'DELETE FROM PWKTODO WHERE WKTDKEY = ? WKTDKEY:'caducator.'
at fuego.server.persistence.jdbc.JdbcToDoItemPersMgr.delete(JdbcToDoItemPersMgr.java:806)
at fuego.server.persistence.Persistence.deleteToDoItem(Persistence.java:758)
at fuego.server.execution.AbstractToDoQueue.persist(AbstractToDoQueue.java:46)
at fuego.server.execution.EngineExecutionContext.persistToDoItems(EngineExecutionContext.java:2054)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1207)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:692)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:375)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:207)
at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:118)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 29 seconds
BEA1-29DC678B1DDE2A93EEAE
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1418)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1330)
at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189)
at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64)
at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92)
at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:482)
at fuego.jdbc.FaultTolerantConnection.prepareStatement(FaultTolerantConnection.java:541)
at fuego.server.persistence.jdbc.JdbcToDoItemPersMgr.delete(JdbcToDoItemPersMgr.java:763)
at fuego.server.persistence.Persistence.deleteToDoItem(Persistence.java:758)
at fuego.server.execution.AbstractToDoQueue.persist(AbstractToDoQueue.java:46)
at fuego.server.execution.EngineExecutionContext.persistToDoItems(EngineExecutionContext.java:2054)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1207)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:692)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:375)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:207)
at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:118)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1343)
at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189)
at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64)
at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92)
at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:482)
at fuego.jdbc.FaultTolerantConnection.prepareStatement(FaultTolerantConnection.java:541)
at fuego.server.persistence.jdbc.JdbcToDoItemPersMgr.delete(JdbcToDoItemPersMgr.java:763)
... 26 moreThe only thing I'd caution you strongly against doing is to undeploy a project that has active instances in production.
If you do this, the instances currently running through the processes in the project will be lost and cannot be resurrected.
If this is not in production, then undeploying the project obviously won't do you any harm.
Probably not the cause of the problem, but the only time I've seen a similar error was when an incorrect JDBC driver was used for the Engine. If this is not a new installation and you're on the latest patchset and you haven't done anything odd with the JDBC driver, then you might want to give support a call to see if they've run into a similar issue in the past.
Dan -
Hola acabo de agregar una nueva actividad interactiva con un flujo de pantalla de un jsp y a la hor de intentar encender el motor me saca una ventana de erroir diciendo "Error en la publicacion dle proyecto. Motivo se deben de cumplir todos los argumentos al definir la asignacion de argumetnos entrantes de una tarea de invvocacion de flujo de pantalla (Activity: Interactiva1, task:Interactiva1)
defini mis variables de entrada y de salida
graciasHola,
Revisa la asignación de los argumentos de entrada para el flujo de pantalla. Con botón derecho sobre la actividad interactiva, selecciona la tarea principal, en la parte inferior debe decir algo como "asignación de argumentos". Debe haber un "mapeo" para cada una de las variables de entrada que definiste para el flujo.
Lo mismo para las de salida, aunque el error sólo menciona las de entrada. -
When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations. 0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'. 0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed. 0 0Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps. -
Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
ThanksHi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support -
I am able to access the internet, but none of the search engines like Google, Yahoo or Bing will work. the page will not load. I get the error message:
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
Getting error in the adapter engine when sending a message
Hi,
I'm always getting this error in the adapter engine: Message processing failed. Cause: com.sap.aii.messaging.util.URI$MalformedURIException: no scheme
The comm channel ends up in error because of messages having the above error.
Could someone please help?
Thanks.
MikeMike.
Please check this links.
Check your adapter and restarted.
com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number
Re: Prerequisites to setup configure mail scenario.
error in communication channel
Error :Receiver File Channel not Initialized -
Connections are all valid and work when I setup the Refresh but when the schedule refresh occurs I get this error:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The Data Transfer Service has encountered a fatal error when performing the data upload. The remote server returned
an error: (400) Bad Request. The remote server returned an error: (400) Bad Request. Transfer client has encountered a fatal error when performing the data transfer. The remote server returned an error: (400) Bad Request. The remote server returned an error:
(400) Bad Request.;transfer service job status is invalid Response status code does not indicate success: 400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed.
It is trying to refresh 3 simple tables with less than 9,000 rows each.
Also, i'd like to add that the refresh works right from excel as well...
Another fact just in, it seems to work on one out of 3 tables sometimes, so first table gets a success on the log, but sometimes it fails (It succeed twice and failed once with the above error). The second table never succeeds and gets the error above.
The 3rd table never even gets attempted.
Am I running into some sort of timeout perhaps?
loading
Failure
Correlation ID:
7b159044-c719-41f9-8d0f-da6f73576d6e
04/01/2015
at 01:50 AM
04/01/2015
at 01:53 AM
00:03:14
Power Query - Sendout_Records Not tried
Power Query - Positions Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The Data Transfer Service has encountered a fatal error when performing the data upload. The
remote server returned an error: (400) Bad Request. The remote server returned an error: (400) Bad Request. Transfer client has encountered a fatal error when performing the data transfer. The remote server returned an error: (400) Bad Request. The remote
server returned an error: (400) Bad Request.;transfer service job status is invalid Response status code does not indicate success: 400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed.
Power Query - Position_Activities Success.This is not because of the number of rows, instead its the execution time. The query takes more than 7 mins to execute and seems this fails the refresh process.
Thank You -
Hi
We are using SSAS 2008 r2 and have a cube on our data warehouse, this has been running fine for quite a while now.
However it failed yesterday with the error message:
Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table:
'Performance_Fact', Column: 'accountexternalId', Value: '9474'. The attribute is 'External Id'."
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation."
An error occurred while processing the '2011' partition of the 'Fact' measure group for the 'DB' cube from the DB database.
Please can someone help me to resolve the error, I don't understand what it means.
ThanksHello,
The error means that you have a key in the fact data which don't exist in the related dimension. Ensure that the dimension is also processed so that it contains all used keys.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.
I have dropped and recreated a fact table to refresh the data as the table is having identity columns. So not able to directly insert data. After that cube is throwing above error.
Please suggest.Hi Md,
It hard to analyse the issue base on the limited information, Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error. Please provide us the detail information about it, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support -
<Error
ErrorCode="3240034318"
Description="Errors in the OLAP storage engine: An error occurred while processing the 'vFactUTC_201304_INCR_UPDATE_TEMP_qtfcw_' partition of the 'vFact' measure
group for the 'vAMGenericUTC' cube from the AC_OLAP database."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
Any idea abt this error
Putting details error ..
<return
xmlns="urn:schemas-microsoft-com:xml-analysis">
<results
xmlns="http://schemas.microsoft.com/analysisservices/2003/xmla-multipleresults">
<root
xmlns="urn:schemas-microsoft-com:xml-analysis:empty">
<Exception
xmlns="urn:schemas-microsoft-com:xml-analysis:exception"
/>
<Messages
xmlns="urn:schemas-microsoft-com:xml-analysis:exception">
<Error
ErrorCode="3238395904"
Description="OLE DB error: OLE DB or ODBC error: Cannot execute the query
"SELECT
"Tbl1002"."idUTCDateTime"
"Col1145","Tbl1002"."idLocalDateTime"
"Col1146","Tbl1002"."idDateKey"
"Col1147","Tbl1002"."idUTCDateKey"
"Col1148","Tbl1002"."idMinuteKey"
"Col1149","Tbl1002"."idUTCMinuteKey"
"Col1150","Tbl1002"."idInstance"
"Col1151","Tbl1002"."idMetricKey"
"Col1152","Tbl1002"."idKSKey"
"Col1153","Tbl1002"."idMaintenanceKey"
"Col1154","Tbl1002"."MetricMin"
"Col1155","Tbl1002"."MetricMax"
"Col1156","Tbl1002"."MetricCount"
"Col1157","Tbl1002"."MetricSum"
"Col1158","Tbl1002"."MetricLog"
"Col1159","Tbl1002"."MetricSumOfSquares"
"Col1160","Tbl1002"."MetricSumOfLogSquares"
"Col1161","Tbl1002"."idTextData"
"Col1162","Tbl1002"."idLoad"
"Col1143",CONVERT(smalldatetime,"Tbl1002"."idDateKey",0)
"Expr1004",CONVERT(smallint,"Tbl1002"."idMinuteKey",0)
"Expr1006",(1)
"Expr1008" FROM
"DM_VSQL51_SOPM33_QDB"."dbo"."vData"
"Tbl1002" WHERE
"Tbl1002"."idLocalDateTime">=(1362096000)
AND "Tbl1002"."idLocalDateTime"<=(1364774399)
AND "Tbl1002"."idLoad">=(9243)
AND "Tbl1002"."idLoad"<=(9304)"
against OLE DB provider "SQLNCLI10" for linked server
"DM_DS_SOPM33_QDB". ; 42000; The OLE DB provider
"SQLNCLI10" for linked server
"DM_DS_SOPM33_QDB" reported an error. Execution terminated by the provider because a resource limit was reached.;
42000." Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3240034318"
Description="Errors in the OLAP storage engine: An error occurred while processing the 'vFact_201303_INCR_UPDATE_TEMP_he3dx_' partition of the 'vFact' measure
group for the 'vAMGeneric' cube from the AC_OLAP database."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238002695"
Description="Internal error: The operation terminated unsuccessfully."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238002695"
Description="Internal error: The operation terminated unsuccessfully."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3239837698"
Description="Server: The operation has been cancelled."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238395904"
Description="OLE DB error: OLE DB or ODBC error: Operation canceled; HY008."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3240034318"
Description="Errors in the OLAP storage engine: An error occurred while processing the 'vFact_201304_INCR_UPDATE_TEMP_kq5tw_' partition of the 'vFact' measure
group for the 'vAMGeneric' cube from the AC_OLAP database."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238002695"
Description="Internal error: The operation terminated unsuccessfully."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238002695"
Description="Internal error: The operation terminated unsuccessfully."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238395904"
Description="OLE DB error: OLE DB or ODBC error: Operation canceled; HY008."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3240034318"
Description="Errors in the OLAP storage engine: An error occurred while processing the 'vFactUTC_201304_INCR_UPDATE_TEMP_qtfcw_' partition of the 'vFactUTC'
measure group for the 'vAMGenericUTC' cube from the AC_OLAP database."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238002695"
Description="Internal error: The operation terminated unsuccessfully."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
<Error
ErrorCode="3238002695"
Description="Internal error: The operation terminated unsuccessfully."
Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
</Messages>
</root>
</results>
</return>against OLE DB provider
"SQLNCLI10" for linked server
"DM_DS_SOPM33_QDB". ; 42000; The OLE DB provider
"SQLNCLI10" for linked server
"DM_DS_SOPM33_QDB" reported an error. Execution terminated by the provider because a resource limit was reached.;
42000." Source="Microsoft SQL Server 2008 Analysis Services"
HelpFile="" />
Hi Born,
Have you check your disk space? This issue might be caused by not enougl disk sapce. Here is a similar thread about this topic:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/1783c640-5d4d-4086-bbdc-05adc45e3816/
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
Errors in the OLAP storage engine: The attribute key cannot be found when processing
this is the absolute worst error message in all of computing. I despise it. Here is my situation.
SSAS 2008 R2.
I have one dimension. I have not even built my cube yet. only a dimension. I am trying to process it. I can process it when I only have a single attribute, they key. it is a composite key. When I add a new attribute (integer),
I get the error message. There are no null values. There are no blanks as its an integer.
The attribute key cannot be found where? I'm processing the dimension you idiot. there is not even a cube yet in order for any key to be found or not.Hi Baracus,
According to your description, you get the error "Errors in the OLAP storage engine: The attribute key cannot be found when processing" when processing your cube, right?
Generally, the detail error message should like
Table: 'dbo_FactSales', Column: 'ProductID', Value: '1111'. The attribute is 'Product ID'
The above error explains that the fact table named "FactSales" contains column ProductID with value "1111" but the same ProductID is not present in your dimension table. There is a primary key - foreign key relationship exist
between the ProductID column of dimension table and fact table named "FactSales" and cube is unable to find ProductID with value 1111 in the dimension table.
At this time, what we need to do is to check either your dimension and fact table contains the value mentioned in the error message ( Value: '1111' in the above example). Here are some links about troubleshoot this issue, please see:
http://www.businessintelligence-solutions.com/ssas-typical-error-attribute-key-processing/
http://www.youtube.com/watch?v=5O7IAjvtAF4
If this is not what you want, please provide us more information about you issue, so that we can make further analysis.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Errors in the OLAP storage engine
Job is scheduled to process a cube. The job failed with the below errors:
Description: Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Dim ID', Name of 'Dim ID' was being processed.
End Error Error: 2015-01-02 02:17:52.73
Code: 0xC11F000D
Source: Process Dimensions Analysis Services Execute DDL Task
Description: Errors in the OLAP storage engine: An error occurred while the 'HID' attribute of the 'Dim ID' dimension from the database was being processed.
End Error Error: 2015-01-02 02:17:52.75
Code: 0xC1060000
Source: Process Dimensions Analysis Services Execute DDL Task
Description: OLE DB error: OLE DB or ODBC error: Operation canceled; HY008.
End Error Error: 2015-01-02 02:17:52.76
Code: 0xC11F000C
Source: Process Dimensions Analysis Services Execute DDL Task
Description: Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Dim Nme', Name of 'Dim Nme' was being processed.
End Error Error: 2015-01-02 02:17:52.76
Code: 0xC11F000D
Source: Process Dimensions Analysis Services Execute DDL Task
Description: Errors in the OLAP storage engine: An error occurred while the 'NME' attribute of the 'Dim Nme' dimension from the database was being processed.
End Error Error: 2015-01-02 02:17:52.78
Code: 0xC1060000
Source: Process Dimensions Analysis Services Execute DDL Task
Description: OLE DB error: OLE DB or ODBC error: Operation canceled; HY008.
End Error Error: 2015-01-02 02:17:52.78
Code: 0xC11F000C
Source: Process Dimensions Analysis Services Execute DDL Task
Description: Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Dim Ky', Name of 'Dim Ky' was being processed.
End Error Error: 2015-01-02 02:17:52.79
Code: 0xC11F000D
Source: Process Dimensions Analysis Services Execute DDL Task Description: Errors in the OLAP storage engine: An error occurred while the 'KY' attribute of the 'Dim Ky' dimension from the database was being processed.
End Error Error: 2015-01-02 02:17:52.81
Code: 0xC11F000D
Source: Process Dimensions Analysis Services Execute DDL Task
Description: Errors in the OLAP storage engine: An error occurred while the 'Id' attribute of the 'Dim Txt' dimension from the database was being processed.
End Error Error: 2015-01-02 02:17:52.81
Code: 0xC11F000D
Source: Process Dimensions Analysis Services Execute DDL Task
Description: Errors in the OLAP storage engine: An error occurred while the 'Id' attribute of the 'VWIprve' dimension from the database was being processed.
End Error DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:00:22 AM
Finished: 2:18:02 AM
Elapsed: 4660.47 seconds. The package execution failed. The step failed.
Please help!!!!!!Hi,
According to your description, you create a SSIS package to process SSAS cube, the problem is that you are experiencing the error "Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Dim Nme', Name of 'Dim Nme'
was being processed“ while executing the job, right?
Based on my research, the issue can be caused by that you haven't set a primary key in your dimension table. Here is a blog that describe this issue, please see:
http://blogs.microsoft.co.il/barbaro/2014/03/03/errors-in-the-olap-storage-engine-processing-a-large-dimension/
Regards
Charlie Liao
TechNet Community Support -
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing
Hi dear MSDN Community,
I am facing a problem while processing a cube with a customer hierarchy as follows:
Global Account --> Main Customer --> Master Customer --> Customer
The data comes from a flatted parent child table, that is, I create an extra column for every level of the hierarchy in the customer view. If a level is empty, then the value is filled with the previous value. Then I can use the property:
HideMemberIf = OnlyChildWithParentName for the intermediate levels (Main and Master Customer)
HideMemberIf = ParentName For the leafs (Customer)
HideMemberIf = never for the root (Global Account)
Consider this example:
Then, for the root level I am using as the key the fields in yellow in order to avoid duplicates. However, I am getting the error message "Errors in the OLAP storage engine: A duplicate attribute key has been found when processing" while processing.
I analyzed the query that SSAS issues to the server (select distinct ....) and I think it should work but it is still failing.
I had similar problems with the intermediate levels but I was able to solve it using a similar procedure.
Any help will be appreciated.
Kind Regards.When are you having this error? While processing the dimension or during cube processing?
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End FunctionI think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)
Maybe you are looking for
-
How do I enable "Data under cursor"?
Hi all, I just started playing around with the new Au CS6, like it a lot so far! I've had good luck getting all the little tweaks I liked from Au 3 working except this one small thing which to many may seem unnecessary, but I have found to be very us
-
One time 2 free of charge item in an order
Hi Gurus I am working on an sd pricing role that that has a requirement in place for pharmaceutical companies to offer (one time only) 2 free vials of Soliris to every new patient free of charge and a discount from the list price on the rest of the
-
Hello I need some help here. I am trying to format a new Western Digital 2tb my book essential. To do this I apparently need to open Disk Utility... but it will not open. the icon flashes for a second but then closes immediately. I have 15% of my har
-
Converting from Word 2007 to PDF (Acrobat 8.0) footers formatting problems
As the title describes, when I convert to pdf the text in my footers is changed. In Word, the footer simply has a link back to the bookmarks. The text is as so: Click here go to back to the Table of Contents (with the Table of Contents text the act
-
I triyed to enter cds and read on itunes. But it seems that itunes are not able to read the cd and doen't recognize anything. The cd are ejected just after. why ? somebody to help me ? bets bg