Error : the class does not match the class of the persisted object

Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. How to resolve this Exception? I nead to Deserialize this stream...

ArulPrabhu wrote:
Friend... I agree with u... Every thing Ok... I am not having the option to make change on the server side... I call a webrequest for the URI - "http://www.nseindia.com/chartdata?mkttype=N&series=EQ&symbol=RPOWER&charttype=ONLINE_STOCK".. From that i got response as Serialized Object Stream... Which is the data made available to all through their applet "Chart".. But i need it for my Custom Project.. I know the Structure of class they have serialized... Is their any chance to parce Data from that Stream..
Three words.
You are doomed.
Whatever you end up doing will not be serialization. It will be reverse engineering of a old (dead) format that could go all pear shaped on you when you least expect it. One of the worst problems in using a solution where you reverse engineer, try and guess hackery your way through a proprietary semi (or totally) undocumented format is that it is really impossible to test your code with any degree of certainty. Does your code actually work? Or does it only work because you haven't seen some totally unexpected (but legal for the format) format yet?
Get the producer to produce XML instead of "serialized" data. This is a much better route for you to go down.
If you decide to keep on your path then grab a DataInputStream and go somewhere else because you'll have to figure out the format of another languages serialized data on a place that isn't this site.

Similar Messages

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to    *
* compile the currently running kernel. This can cause unpredictable         *
* behavior in kernel drivers and should be fixed.                             *
* gcc version: Linux)                                                          *
* kernel compiled with: 4.3.2                                                 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name        : kernel-source                Relocations: /usr/src
Version     : 2.6.27.29                         Vendor: openSUSE
Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size        : 309251954                        License: GPL v2 only
Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager    : http://bugs.opensuse.org
URL         : http://www.kernel.org/
Summary     : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
    Linus Torvalds <[email protected]>
    see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Cannot open install assistant. I get this error message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Pleas

How can I downloade a trial of Adobe Elements 12?
I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.

Hi alposer,
Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
Regards,
Rave

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

ClickOnce: Reference in the manifest does not match the identity of the downloaded assembly Office.dll

I have WPF application, which has the excel component reference. I have the deployment issue when i user Office 2007 installed on my server and try to access the application i get Reference in the manifest does not match the identity of the downloaded assembly Office.dll , but when office 2003 is installed there is no issue deplying.
Below is the detail of the issue.
PLATFORM VERSION INFO
    Windows             : 5.1.2600.131072 (Win32NT)
    Common Language Runtime     : 2.0.50727.3082
    System.Deployment.dll         : 2.0.50727.3053 (netfxsp.050727-3000)
    mscorwks.dll             : 2.0.50727.3082 (QFE.050727-3000)
    dfshim.dll             : 2.0.50727.3053 (netfxsp.050727-3000)
SOURCES
    Deployment url            : http://<Server>/VFOLDER/pages.xbap
    Application url            : http://Server/VFOLDER/Application%20Files/pages_1_0_0_3/pages.exe.manifest
IDENTITIES
    Deployment Identity        : pages.xbap, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil
    Application Identity        : pages.exe, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil, type=win32
APPLICATION SUMMARY
    * Online only application.
    * Browser-hosted application.
ERROR SUMMARY
    Below is a summary of the errors, details of these errors are listed later in the log.
    * An exception occurred while downloading the application. Following failure messages were detected:
        + Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
    No transaction error was detected.
WARNINGS
    There were no warnings during this operation.
OPERATION PROGRESS STATUS
    No phase information is available.
ERROR DETAILS
    Following errors were detected during this operation.
    * [6/22/2009 5:43:31 PM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
        - Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
        - Source: System.Deployment
        - Stack trace:
            at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
            at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
            at System.Deployment.Application.FileDownloader.OnModified()
            at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
            at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
            at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
            at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options)
            at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
            at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
COMPONENT STORE TRANSACTION DETAILS
    No transaction information is available.
Any one has faced the problem... any help will be very grateful.
Thanks in Advance.
Sunil

Thanks for the reply Robin, here is some of the observation, hope you can provide some solution from your end.
1. When Publish my build, in the Manifest file dependentAssembly has two reference to Office.dll one with version 11.0.0.0 and another with version 7.0.3300.0.
2. In the pages_1_0_0_4 Published folder has one office.dll with version 11.0.5530.0
3. In the root folder of the virtual directory has one office.dll with version 7.0.9466.0
Can you please give your thoughts, what exactly wrong with the deployment, i feel its a assembly mismatch. where in the application files i have set the required assembly. please provide your useful solution.
Thanks in Advance.
Sunil

The Dreamweaver client version does not match this version of the BrowserLab client

Cannot use BrowserLab
I have followed the upgrade instructions on this page
http://labs.adobe.com/downloads/browserlab.html
Deleted the MeerMeerDW folder, downloaded and installed the latest MXP files.
But when I try to use BrowserLab from Dreamweaver after program loads error message says
"The Dreamweaver client version does not match this version of the BrowserLab client.
Please download and install the latest version of the Dreamweaver MXPs"
I have tried several times, even tried removing the extensions from Extension Manager, quiting the program,
deleting the MeerMeerDW folder, restarting Extension Manager and reinstalling the MXPs, then starting Dreamweaver
and trying the Preview in Browser>Adobe BrowserLab. Same problem, program loads and then get error message.
Macintosh OS 10.5.8
Dreamweaver CS4
Extension Manager CS4 (2.1.115)

Hello toni7,
I'm sorry to hear you're having problems. Are you prompted to replace the existing extensions when performing the installation? The error message you are receiving when using the service is expected if the new versions of the extensions are not installed.
What is the version number of the extensions displayed in Extension Manager?
Are you deleting the MeerMeerDW folder in the user library prior to installing the new version of the extensions? And just to be sure, are you logged in as the same user? [(user)\Library\Application Support\Adobe\CS4ServiceManager\extensions\MeerMeerDW]
Do you have more than one MeerMeerDW folder at the path above?
Also, be sure that all adobe applications are closed before trying to install the new extensions. I would also make sure that CS4ServiceManager, Extension Manager and Dreamweaver are not running when you delete the MeerMeerDW folder and prior to installing the updated extensions. Go to Applications\Utilities\Activity Monitor and Quit Process on any of those three running prior to installing.
It's critical that the MeerMeerDW folder is manually deleted, rather than removed using Extension Manager before updating the extensions.
Best regards,
Corey

The SOAP action specified on the message, '', does not match the HTTP SOAP

Error Message: " The SOAP action specified on the message, '', does not match the HTTP SOAP Action"
we need establish webservice link with our vendors, they are on windows platform and we are on java.
they gave us this URL:
http://mesadstage.webhop.net/MesadSCService/EBOrderService.svc?wsdl
I create a project in Netbeans, then add Web Service Client, put the URL in, after the some configuration and source code generation, i put these codes in the public void main(String[]), it always returned the error msg:
Error Message: "The SOAP action specified on the message, '', does not match the HTTP SOAP Action, 'http://tempuri.org/IEBOrderService/GetData'. "
what was wrong? any thing that I din configured? or it caused by different platforms???
h2. error message (stack trace)
javax.xml.ws.soap.SOAPFaultException: The SOAP action specified on the message, '', does not match the HTTP SOAP Action, http://tempuri.org/IEBOrderService/GetData'.
at org.apache.axis2.jaxws.marshaller.impl.alt.MethodMarshallerUtils.createSystemException(MethodMarshallerUtils.java:1326)
at org.apache.axis2.jaxws.marshaller.impl.alt.MethodMarshallerUtils.demarshalFaultResponse(MethodMarshallerUtils.java:1052)
at org.apache.axis2.jaxws.marshaller.impl.alt.DocLitWrappedMethodMarshaller.demarshalFaultResponse(DocLitWrappedMethodMarshaller.java:659)
at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.getFaultResponse(JAXWSProxyHandler.java:577)
at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.createResponse(JAXWSProxyHandler.java:520)
at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invokeSEIMethod(JAXWSProxyHandler.java:386)
at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invoke(JAXWSProxyHandler.java:171)
at $Proxy11.getData(Unknown Source)
at javaapplication7.Main.a(Main.java:28)
at javaapplication7.Main.main(Main.java:43)
h2. source code:
try {
org.tempuri.EBOrderService service = new org.tempuri.EBOrderService();
org.tempuri.IEBOrderService port = service.getWSHttpBindingIEBOrderService();
java.lang.Integer value = Integer.valueOf(0);
java.lang.String result = port.getData(value);
System.out.println("Result = " + result);
} catch (Exception ex) {
System.out.println("Error = " + ex.getMessage());
ex.printStackTrace();
}

Try to rebuild the index file of the troubled folder.
Right-click the folder - Properties - Repair Folder

Processor type of the file and the device does not match

We ve the following problem with Zfh 7 sp1. When trying to distribute a
application we receive the message failed. When i open the log is see the
below message.
The processor type of the file and the device does not match.
I ve searched on the message and i ve seen that it is a know error and it
should be fixed in SP1
10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
> GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
file and the device does not match.?
The processortype of the device is StrongARM and also from the
applications. Also when i put it on ALL/CEF it won't distribute.
Does some other people also have this problem.

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

CreateAuthenticatedSessionToken: The signature of the request does not match the request parameters

I'm creating an app using the SODA Architecture.
I could successfully create an app and make the client to authorize it.
Result of newApplicationCreationInfo:
<?xml version="1.0" encoding="UTF-8"?>
<response>
<status>
<code>0</code>
</status>
<wc:info xmlns:wc="urn:com.microsoft.wc.methods.response.NewApplicationCreationInfo">
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<shared-secret>gBksYDAqcuAUXK+zyvfFW9F0sy8nchwnplJ6K7aKmAM=</shared-secret>
<app-token>AiAAANDl....A5b9fxVIlXEloouci6jGhY/A==</app-token>
</wc:info>
</response>
I'm using the app-token to build the redirect url, and I get to authorize the new app.
then, using the new child app id and the shared-secret I built the
CreateAuthenticatedSessionToken:
<?xml version="1.0" encoding="UTF-8"?>
<wc-request:request xmlns:wc-request="urn:com.microsoft.wc.request">
<header>
<method>CreateAuthenticatedSessionToken</method>
<method-version>2</method-version>
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<language>en</language>
<country>US</country>
<msg-time>2013-01-01T00:00:00Z</msg-time>
<msg-ttl>1800</msg-ttl>
<version>2.0.0.0</version>
</header>
<info>
<auth-info>
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<credential>
<appserver2>
<hmacSig algName="HMACSHA256">PcW4f9krD1O43O4JGBGEkqDlpatFIUUQY9JejHji0XA=</hmacSig>
<content>
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<hmac>HMACSHA256</hmac>
<signing-time>2013-12-17T14:19:58.623Z</signing-time>
</content>
</appserver2>
</credential>
</auth-info>
</info>
</wc-request:request>
Being hmacSig value the encryption of "<content>....</content>" using shared-secret value as private key:
hmacSig = Encodingutil.base64Encode(Crypto.generateMac('hmacSHA256', Blob.valueOf(body), Blob.valueOf(sharedSecret)))
this returns an error code 11: The signature of the request does not match the request parameters.
I'm using the following endpoint: https://platform.healthvault-ppe.com/platform/wildcat.ashx
Also the redirection url I received after authorizing the app contains the following:
https://<MY_URL>/?gws_rd=cr&ei=h5ewUuKLJa7IsASc4YHIAw I'm not using this parameters, if that helps.
Any hint will be greatly appreciated.
UPDATE: I already checked the HMAC encoding using a third party service and it returned the same as my app

I figured this out (God bless Pair Programming):
I was signing incorrectly:
On the newApplicationCreationInfo:
My Shared Secret is : gBksYDAqcuAUXK+zyvfFW9F0sy8nchwnplJ6K7aKmAM=
But BEFORE hashing the "<content>...</content>" i need to decode my secret that is:
hmacsig = calculateHMAC256(content, sharedSecret.decodeBase64())

Shuffle play no longer works properly and the artwork does not match after iOS5 upgrade.

When I use shuffle play, my ipod touch stops playing after one or two songs and the artwork does not match the song.

i have what sounds like the exact problem; thought it might be related to a) my recent replacement phone, or b) my recent upgrade to OS 5.0.1

When a video is taken in Photo Booth, the sound does not match up

When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

Setup for testing server "the prefix does not match.."

I am just getting started using Adobe Dreamweaver CS3
with AppServ (Apache, Php, MySQL).
Im using Windows XP Service Pack 2 and and test it on the
same computer.(localhost)
I created a folder on my hard drive
C:\AppServ\www\MyLocalSite.
Here´s the setup under the Advanced tab in Dreamweaver:
Server model:
php Mysql
Acess:
local network
Testing server folder:
AppServ/www
URL Prefix:
http://localhost/MyLocalSite
When I click OK, the following message is displayed:
The site URL Prefix for the testing server does not
match..
I have run a lot of sites on my localhost but never ever
get this unusual message.
The worst is - I cant use the Recordset with Bindings in
Dreamweaver CS3 if I dont solve this weird "prefix" problem.
I ´ve tried a lot of workaround solutions but always end
up with the message
that prompt "the prefix does not match.."
Is it a bug or what?
I appreciate every answer
Update
21:47.................................................................................... .
I´ve tried to configure a connection to the database
and I end up with this message:
1) There is no testing server running on the server machine
2) The testing server specified for this site does not map
the
http://localhost:80/myLocalSite/_mmServerScripts/MMHTTPDB.php
URL.
Verify that the Prefix maps to the root of the site
The server is running and is working when I request my local
site in IE 7:
localhost/myLocalSite/index.php

I too had been experiencing this problem after installing XP
service pack 3 last week.
Too fix this issue I had re-assign all file permissions to my
root web folder.
Remove all permissions and re-assign the groups
administrators, authenticated users and everyone FULL CONTROL of
this folder.
Click the advanced button and make sure permissions are not
being inherited from the parent folder.
Then select the option to re-assign all permissions to all
child files/folders.
Good luck.

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When watching a movie in Itunes the sound does not match the lips

when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?

Try the suggestions in this thread.

Error : the class does not match the class of the persisted object

Similar Messages

Maybe you are looking for