Error - The version number in the package is not valid. The version number cannot be greater than current version number

whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading  The version number in the package is not valid. The version number cannot be greater than current version number.  
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".  

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started:  2:02:13 PM
Error: 2015-01-30 14:02:14.68
   Code: 0xC000F427
   Source: Member Eligibility
   Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
   Code: 0x80019002
 Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution
 method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started:  2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

Similar Messages

  • The version number cannot be greater than current version number

    i am deployingmy ssis package which is in 2012.(version 6)
    and my ssis server also in 2012.
    but i am getting error:
    "the version number in package is not valid, the version number cannot be greater than current verison number"
    and one more thing how to see ifmy package is in 2012,by looking it in notepad?

    Hi coool_sweet,
    Based on the error message that "The version number in the package is not valid. The version number cannot be greater than current version number.", we can infer that the underlying cause may be that the current SSIS package is created in SQL Server
    2012, while you are trying to open or execute it in SQL Server 2008R2 or earlier versions.
    As to your scenario, I guess you are using old version of the DTEXEC instead of the new one to run the package. That means, the exe shipped with 2008R2 or earlier versions is picked up when it is expected to use the one shipped with 2012. So, obviously this
    happens when SQL Server 2012 is running along with SQL Serve r2008R2 or earlier versions on the same machine.
    To fix this issue, there are three workarounds to correct this.
    Hard code the path of SQL Server 2012's DTEXEC while calling the SSIS package as shown below.
    C:\Program Files\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
    Rename the old exe in the 2008R2 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC_Old.exe)
    Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\110\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • The code segment cannot be greater than or equal to 64K. - Windows 8

    Hello,
    I am having an issue on some windows 8 systems, a crash occurs in NtSetEvent, the exception thrown is "0x000000C8: The code segment cannot be greater than or equal to 64K.".
    This crash only occurs on Windows 8.
    The callstack doesn't help much
        KERNELBASE.dll!_RaiseException@16()    Unknown
        ntdll.dll!_NtSetEvent@8()    Unknown
        kernel32.dll!@BaseThreadInitThunk@12()    Unknown
        ntdll.dll!__RtlUserThreadStart()    Unknown
        ntdll.dll!__RtlUserThreadStart@8()    Unknown
    Could it be a bug within windows 8 ? If not what steps should I take to find the cause of this crash ?
    Thank you,
    Max

    I have a feeling like you have corrupted something.  Likely by stomping on memory due to a bug in your program such as a buffer overrun or use of a deleted object in C++.
    Although you may have incurred corruption to your registry through a variety of means, not limited to bad disk drives, or the unintentional write of bad data due to a bug in your program, if you are experiencing this on multiple systems, then registry corruption
    is less likely.  Which brings me back to the idea that you have a bug in your code that has trashed memory somehow.
    The stack traces and error codes do not indicate the cause of the problem.
    What does your program do??
    Without seeing at least some of the code, or knowing how big the scope of the code is, it's not useful for me to start guessing specifics of what may have happened.  But since you're not disclosing anything at all about your code apart from your exception,
    I'm forced to do some guesswork and just give general advice.
    Here are some easy classical strategies for locating the cause of the problem:
    Build your code in debug mode and run your code in the debugger.  (Yes, some people need to be told this.)
    Bisect the problem through revision control.  Back up to when the problem didn't happen and find the last revision that causes the problem.  (If you're not using a revision control system, start now.)
    Bisect the problem by eliminating chunks of code.  Trim out functionality until the problem goes away.
    Write unit tests.  Test the various pieces of your program to eliminate bugs.  At the very least, make use of assertions.
    Have a look at what your program is DOING when the crash happens.  Certainly there must be a cause.  Try to isolate the problem by associating it with a certain activity in your program.  Gate off functionality by introducing places where
    your program waits before proceeding.  At some point, you'll pass a point where the error can now occur.
    Run code analysis on your project and see if it comes up with any possible culprits.
    Don't ignore compiler warnings, they often indicate something that can turn into a bigger problem.  Compile at the highest warning level.
    Look at your usage of various API functions for logical mistakes.  Here are some examples:
    When using third party libraries or SDKs, have you initialized libraries appropriately?  Have you called all the appropriate initialization functions and used the APIs as intended?  Read documentation and make sure you are using calls appropriately.
    For functions that take a HANDLE, such as SetEvent, are you passing a valid handle?  Have you closed the handle but kept the old handle value around?
    When storing pointers to objects, have you accidentally deleted an object but kept its pointer around, only to make use of the pointer at a later time in your program?  This is particularly harmful when performing a write operation as you can corrupt
    just about anything.
    Are you using variables without giving them an initial value?  You may get unexpected values for variables if you do not initialize them.  This is particularly important for stack variables.
    When using arrays or string buffers, have you allocated enough storage for the bytes you are writing?  C++ doesn't detect reading or writing with an invalid array index as a problem.  It happily reads or writes past the end of your intended
    storage.  Such offences are called "buffer overruns".
    When multi-threading, are you taking steps to ensure data integrity?  Unsynchronized access to data from multiple threads is a notorious cause of strange and difficult to reproduce bugs.  Your data passes through states that you may not expect
    that can be observed by unsynchronized threads.  Use locking mechanisms appropriately and marshal your data diligently.
    Are you relying on valid input from an external source beyond your control such as a network client, database, or file?  Diligently validate all input that comes from an external source.  Be prepared for any situation that you can't control at
    compile time.
    Are you ignoring error codes?  Some functions may fail, but you may be assuming they have succeeded and then gone on to use invalid data.
    Look for mathematical errors.  Calculation of indices of arrays are a notorious culprit.  Beware of off by one errors.  Indices start at zero and go up to N-1, where N is the number of elements in the array.
    Beware of sentinel values.  Some functions such as "IndexOf" will return an index of -1 when not found and can result in a miscalculation of an actual index.
    Are you making use of
    RAII techniques in your code?  Failing to correctly allocate and deallocate resources can cause problems.
    Are you making use of unsafe casts?  C-Style casts say "I know what I'm doing", and you can get into dangerous situations.  Prefer static_cast<> over a C-Style cast wherever possible.
    Also look at your project settings for problems
    Have you accidentally mixed incompatible compiler settings between components?
    Approach debugging with an open mind.  Mark Twain said, "It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."

  • "Time machine error, The disk image cannot be mounted" What can I do??

    I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
    P.S. I use time capsule for backup. there were no problem on connection

    I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
    I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
    UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
    Message was edited by: kryzma

  • WINRM error : The WinRM client cannot complete the operation within the time spe cified

    Dear All
    Please find
    We have developed a management pack on RMS which is analyzing information from linux by using module with calling winrm.
    In mentioned module before calling winrm through netcat , the agent status will be controlled on target host.
    But this error on specific sles host will halt the executing workflow .
    This workflow will working successfully after couple of intervals and again the error coming up.
    Although the workflow is halting by the mentioned error a  task that used the same module is working fine without any error on that host and
    This workflow is running on other instances of the discovered class correctly
    (on SLES hosts sles11 and sles10 64bit) .
    Error :
     The WinRM client cannot complete the operation within the time spe cified. Check if the machine name is valid and is reachable over the network and  firewall
    exception for Windows Remote Management service is enabled. Error number:  -2144108250 
    The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exce ption for Windows Remote Management
    service is enabled.
     Linux host :
    SLES 10 32 bit
    SP2

    Hi,
    Any error or warning for the operation manager log under event viewer?
    Based on my research,
    Possible Causes for this issue:
    The host is unreachable due to incorrect name resolution, network outage, or
    host outage
    A network or host-based firewall is blocking TCP port 1270 connectivity to the target host
    Resolutions
    Verify that Management Server can ping the agent host by Fully-Qualified
    Domain Name
    Verify that no network firewalls or host firewall is blocking TCP port 1270
    In addition, check whether you have heartbeat failures in your environment for linux, if so, please go through the below link:
    OpsMgr: UNIX/Linux Heartbeat Failures After Applying KB2585542
    http://operatingquadrant.com/2012/01/12/opsmgr-unixlinux-heartbeat-failures-after-applying-kb2585542/
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • I cannot open Pages from the app or from a saved document on the desk top.  I get an error: "The application Pages cannot be opened  -1712"  Any suggestions?

    I cannot open Pages from the app or from a saved document on the desk top.  I get an error: "The application Pages cannot be opened  -1712"  Any suggestions?

    The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712

  • Crystal Report error - "the group section cannot be printed..."

    Hello to everyone.
    I have a CR report based on a database view.
    Everything is ok when i run the report in the CR designer but choosing the option to preview the report or run it from the SAP Business One (8.81 PL 08) i get an error:
    "the group section cannot be printed because its condition field is nonexistent or invalid. Format the section to choose another condition field. Error in file "the Report name".rpt. Invalid group condition".
    i must say that this happens in all my reports where i have group data. Also i must say that all those reports were ok some days before...
    Is there a way for me to know what field is it refering to?
    I have verified the DB and it is pointing correctly and the also the View returns data.
    Thanks in advance

    Hello Gordon,
    thanks for your response. the reports were working fine until 8.81 PL05
    We have upgraded the customer from PL05 - > PL08 a week ago.
    Do you think that maybe this is the problem?
    Thanks in advance

  • Boot Camp error: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows.

    Hi!
    I am getting the error:
    "The startup disk cannot be partitioned or restored to a single partition.  The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows."
    I read up some on google, but all of them says that they have crated a partition and that is the problem, I only have the standard "Macintosh HD".
    I tried to create a partition manually in disk utility but then the error message: "Partition failed with error message: Could not unmount disk."
    Can anyone help me? It's driving me crazy.
    Thanks.

    This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
    Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
    Then partition.
    Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
    You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

  • Error -2147024714 : Automation Error the operating system cannot run %1'

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

  • Trying to uninstall itunes 11.0.4 from my Windows 7 computer. I get an error message that say "This Installation package could not be opened. Contatc the application vendor to verify that this is a valid windows installer package. Any solutions???

    Trying to uninstall itunes 11.0.4 in order to update to the most recent itunes. I get an error message that say..."This installation package could not be opened. Contact the application vender to verify that this is a valid windows installer package.

    Hello JAH1961,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • CAN NOT SYNC PHOTOS (Error: "The Required file cannot be found")

    Hey All,
    So i got a an iPod Touch today from the Apple Soho Store in NYC. Very Excited.
    I am getting an error though when syncing my photos. I created an album for the iPod Touch and am only syncing that.
    The error that I get is:
    *"The iPod "My iPod Name" cannot be synced. The Required file cannot be found."*
    Things I've tried:
    - Not syncing the photos: Everything works fine
    - Not syncing that album, but another album: Same Error
    - Read up on the same problem on the iPhone: The only solution that I saw that didn't work on some iPhones was to clear the Keywords. I WILL NOT CLEAR MY KEYWORDS.
    I am using the most update-to-date versions of iTunes, OS X, and iPhoto 08'.
    Please help!
    Oh and by the way if you know how to make it Disk-Enabled. Please tell me. Apple is lame for taking that feature away from the iPod.
    - CW

    Hello,
    Explore iphoto library (right click, "show package contents"). There is a folder called iPod Photo Cache. You need to delete the contents of that folder dragging them to the trash. Then sync your iphone again.
    Best,

  • Error: "The folder "iTunes" cannot be found or created, ..."

    The full error message I am receiving is:
    "The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder."
    I cannot access iTunes at all. I have removed it from my computer and downloaded it several times and that has not helped. I am running on Windows XP platform.
    Ideas of how to fix this??
    THANKS!

    I will try that when I get home. Part of the problem could be that after I installed iTunes and loaded most of my music onto my computer, my hard disk space ran out. I bought an external hard drive and transferred everything to that. iTunes still worked. I downloaded an updated version of iTunes and that is when I started receiving this message. I will try the TweakUI. If you have any more thoughts, let me know.
    THANKS!
    Dawn

  • ITunes won't open -error: The folder "iTunes" cannot be found or created...

    Hello,
    I am not able to open my iTunes. I was able to use it yesterday. I keep getting the message:
    *The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.*
    I have created a folder called "iTunes" in my "My Music" folder, which does not fix the problem.
    I have uninstalled and installed iTunes twice.
    I have used the repair option when trying to install iTunes over the top of my current iTunes.
    None of these options has fixed the problem.
    If anyone knows how to fix this, I would really appreciate it.
    Thanks!
    Rachel

    I found the answer on another board... Below are the parts I found useful (quoted).
    Click on Start
    Clin on Run
    Type in "regedit" Enter
    Do this step twice as there are two locations. +(I actually had 4 locations.)+
    CTRL F
    Type in "My Music"
    Double Click and enter the path for where the folder is located.
    Then exit.
    The exact locations of the 2 entries that I changed are
    hkeycurrentuser - software - microsoft - windows - current version - explorer - shell folders
    and
    as above - windows - current version - explorer - USER shell folders
    I located the location of my iTunes folder (something like this - C:\Documents and Settings\"yourname"\My Documents\My Music\iTunes.
    I copied it, and when I found the regedit location referred to, doubleclicked the location and pasted the path in there.
    http://forums.ipodlounge.com/showthread.php?s=&threadid=12125
    +- Look for post by nrendle and then browse through posts from that point on...+

  • ITunes open error: "The folder "iTunes" cannot be found or created, ..."

    I have a laptop with iTunes installed. My IT guys have our LAN set up so that when I login on our LAN, all files in the "My Documents" folder are syncronized with a copy of those files on our server. When I'm connected to the LAN, iTunes starts and works just fine. I can download music, syncronize my iPod and all features work.
    When I disconnect from the LAN and try to start iTunes I get the following error message:
    "The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “My Music” folder."
    I had the same problem on a previous laptop and solved it by putting an alias of the iTunes music folder where iTunes was looking for it. Unfortunately, I cannot get the same method to work on my new laptop. I have put aliases of various folders in many different locations hoping to trick iTunes into finding my network alias without success.
    Has anyone else experienced this problem? Any solutions?
    Latitude D810   Windows XP  

    Yes. Step 3 is the key. Thanks...
    jtoons: The problem is that iTunes expects the "My
    Music" folder to be both available and writable.
    That's where the actual library files are stored.
    When that folder is not available, you can't run
    iTunes.
    Since your My Documents folder is on the server, and
    the default location for the My Music folder is
    inside the My Documents folder, it won't work unless
    you can access the server.
    The solution to this is to make a local My Music
    folder and configure Windows to use that one instead.
    Here's how to do it:
    1. Download TweakUI from Microsoft.
    2. Create a new folder somewhere on your local
    computer. Call it My Music.
    3. IMPORTANT: Copy the contents (Not the folder
    itself! Just the contents!) of the old My Music
    folder in your My Documents folder into the new My
    Music folder.
    3. Using TweakUI, change the system's "My Music"
    folder to be the new folder on your local drive.
    Follow those instructions precisely and it'll work.
    Skip step 3 and you make things annoyingly
    complicated.

  • Bootcamp error, 'the startup disk cannot be partitioned or restored to a single partition.'

    I am trying to set up bootcamp for gaming purposes.
    I attempted this several months ago and was able to proceed to the point of accessing the Windows disk utility but noticed that I was running out of memory on the partition. I believe I deleted the partition through mac OS, thinking I would simply re-run Bootcamp. Honestly, I have forgotten the details but now am unable to get past an error message on Bootcamp saying, "The startup disk cannot be partitioned or restored to a single partition."
    Also, when I look at my disk utility settings I see I have two Macintosh HD with exactly the same numbers, i.e. 1.94 TB free of 2.09 TB.
    Any assistance with this would be appreciated.
    Thank you.

    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *3.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         1.3 TB     disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:          Apple_CoreStorage                         905.9 GB   disk0s4
       5:                 Apple_Boot Boot OS X               134.2 MB   disk0s5
       6:          Apple_CoreStorage                         801.4 GB   disk0s6
       7:                 Apple_Boot Boot OS X               134.2 MB   disk0s7
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *2.1 TB     disk1
                                     Logical Volume on disk0s2, disk0s6
                                     3D3FBA3D-8C26-4550-AD7E-CBF1FC688185
                                     Unencrypted
    CoreStorage logical volume groups (2 found)
    |
    +-- Logical Volume Group 31DCB352-9C95-43EC-8F16-FBFFAEF2EC92
    |   =========================================================
    |   Name:         Macintosh HD
    |   Status:       Online
    |   Size:         2093598998528 B (2.1 TB)
    |   Free Space:   0 B (0 B)
    |   |
    |   +-< Physical Volume 2D83E3CA-C968-4A83-9900-7FE4325B15F6
    |   |   ----------------------------------------------------
    |   |   Index:    0
    |   |   Disk:     disk0s2
    |   |   Status:   Online
    |   |   Size:     1292162457600 B (1.3 TB)
    |   |
    |   +-< Physical Volume 91499DB6-ED61-4BD9-A5FA-A3A469461673
    |   |   ----------------------------------------------------
    |   |   Index:    1
    |   |   Disk:     disk0s6
    |   |   Status:   Online
    |   |   Size:     801436540928 B (801.4 GB)
    |   |
    |   +-> Logical Volume Family 1AC34EBA-7E2E-4483-868A-9C1208206E73
    |       ----------------------------------------------------------
    |       Encryption Status:       Unlocked
    |       Encryption Type:         None
    |       Conversion Status:       NoConversion
    |       Conversion Direction:    -none-
    |       Has Encrypted Extents:   No
    |       Fully Secure:            No
    |       Passphrase Required:     No
    |       |
    |       +-> Logical Volume 3D3FBA3D-8C26-4550-AD7E-CBF1FC688185
    |           ---------------------------------------------------
    |           Disk:                  disk1
    |           Status:                Online
    |           Size (Total):          2092978229248 B (2.1 TB)
    |           Conversion Progress:   -none-
    |           Revertible:            No
    |           LV Name:               Macintosh HD
    |           Volume Name:           Macintosh HD
    |           Content Hint:          Apple_HFS
    |
    +-- Logical Volume Group 02021BDF-4B53-4A05-AE99-111B5ABAA416
        =========================================================
        Name:         BOOTCAMP
        Status:       Online
        Size:         905864802304 B (905.9 GB)
        Free Space:   905512476672 B (905.5 GB)
        |
        +-< Physical Volume 15BED824-E4C1-4AAF-8BB3-D4D4FAFA7ABE
            Index:    0
            Disk:     disk0s4
            Status:   Online
            Size:     905864802304 B (905.9 GB)
    gpt show: /dev/disk0: mediasize=3000592982016; sectorsize=512; blocks=5860533168
    gpt show: /dev/disk0: PMBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 5860533167
           start        size  index  contents
               0           1         PMBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  2523754800      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      2524164440     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      2525433976        1928        
      2525435904  1769267192      4  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      4294703096      262144      5  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      4294965240  1565305744      6  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      5860270984      262144      7  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      5860533128           7        
      5860533135          32         Sec GPT table
      5860533167           1         Sec GPT header
    Disk: /dev/disk0 geometry: 97451/255/63 [1565565872 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 - 4294967294] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

Maybe you are looking for