Error using SHIFT statement when migrating program from R/3 4.7 to ECC6.0

Hello Experts,
The SHIFT statement is giving following error in ECC6.0 but the same is warning in R/3 4.7.
"Floating point variable can not be used with SHIFT statement.".
Statement is - SHIFT itab-f1 by 5 places where f1 is a floting point field.
We passed the value in string variable and used in the SHIFT statement. It is removing the error but not giving the result same as in R/3 4.7.
Please let me know how to solve this.
Thanks and Regards,
Rahul

Hello,
Thanks for the reply.
We don't know why was this code written. We are just moving the object from R/3 4.7 to ECC 6.0 and fixing the errors.
Could you please let me know "What it means to SHIFT a floating point variable by some spaces"? .
This i am asking because SHIFT RIGHT generally means to shif the value to the right by some spaces i.e. inserting space at the starting.
But in case of floating point it change the value itself. If you can tell me then i can find an alternative solution to get the same result.
Thanks and Regards,
Rahul

Similar Messages

-error in XML document- when migrating from BPEL 10.1.3.3 to 10.1.3.4

Hi,
I've just been handed as set of BPEL processes which were developed in 10.1.3.3 and I'm working on migrating them to 10.1.3.4.
Migration of most processes was straight forward, however, there is one process (SendMessage) that accepts an XML document as its input. The message payload is successfully sent in the older version, however, in version 10.1.3.4, I keep on getting the following error.
Server was unable to read request. ---> There is an error in XML document (195, 99). ---> Input string was not in a correct format.
The line number is the end line number of the xml document message.
I've checked both versions and in 10.1.3.3 the ValidateXML option is set to false, whereas in 10.1.3.4 its 'none', which is equivalent to false.
Are there any other settings in 10.1.3.4 that could be causing this error? Has anyone else come across this issue when migrating upgwards from 10.1.3.3?
I would greatly appreciate any suggestions.
Kind regards,
Shiraz

I had recently done the same migration. One of the issues I had faced was while specifying the nillable elements I used to get an error if the namespace definition was in the header. The error was occuring while sending the message to AQ.
I do not know if this will help. Also it would be useful if you could provide details of where the process is failing is it failing at the receive activty or later. What does the process do....
Best of luck with the problem.

Error "Error in ABAP statement when processing an internal table. table."

Hello,
I am facing the error when tried for GR from SRM portal for my shopping cart and for others created shopping cart. The error is
"Error in ABAP statement when processing an internal table. table."
I have the central receipient role. Couold any body assist me?
Thanks,
Pijush

Hi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh

Getting error Uni code check when modifying Ztable from work area?

Hi all,
Getting error Uni code check when modifying Ztable from work area?
and how to increment counter when data modified?
FM 'popup_to_confirm'.
IMPORTING
       answer                      = RES.
CHECK
      RES = '1'.
        WRITE :/ 'UPDATE'.
      MODIFY ZPPT_PPDPLAN FROM GWA_FIN_PROD.
thanks in advance..

what error you are getting. make sure source and Target are of similar sturcture.

Got Error when migrate repository from obiee10g to obiee 11g

Hi all,
i'm testing to migrate repository from obiee10g to obiee 11g , when i done the migration repository and check gobal consistency . It show an error below
of repository's 11g , but when i check repository's 10g .It doesn' throw any error .Any suggestion ?
ERRORS:
BUSINESS MODEL PTTCH Core:
[nQSError: 15037] Table, PTTCH - Dim - Value Center, has multiple key level associations: Detail and [].
[nQSError: 15001] Could not load navigation space for subject area PTTCH Core.

Check this thread:
Re: nQSerror 15037
Adil

"Resource Busy" error during image creation,using disk utility when booting up from installation DVD

Hi all, first post to this community, wish all well
I have a MBP which is more than three years old, installed with OSX Leopard 10.6. Recently the MBP failed to to start and I tried to follow some articles online, including some from this community, to repair my disk, and more importantly, to backup data on the startup disk. But it does not work quite well so I try to seek some help here.
What I have done is to bootup with the installation DVD, try to verify and repair the disk using disk utility, which tells me it can't repair and recommend to backup, erase and reinstall. Am fine with this recommendation but now the problem is on the backup part. There are two partitons on this 500GB hitachi SATA disk. One is 300G which is for OSX itself, and the other 200G was partitioned for Time Machine. The repair failure is on the OSX partition which contains most of the recent data that I want to backup/restore. And unfortunately the Time Machine backup was stopped about two month ago, for some stupid decision I have made , while I am hoping to recover some data for the past month.
Currently the SMART status of the whole disk is verified, the OSX partition is unmounted with no details in the Available, Used, Number of Files, etc. From what I have researched (correct me if I am wrong), I highlight the OSX partition from the list on the left, click 'New Image' button on top, and select the destination to try to create an image of the current partition. But regardless of my desintation (Time Machine partition, or external USB drive), the imaging process always failed with Resource Busy error. Some online search suggest that the partition must be in unmount status but seems it does not apply to this case.
Would be really appreciated if anyone can give me some advice on what's the 'resource busy' error mean, how to backup the OSX partition, or what are the other possible alternatives.

Very poor idea to keep the Time Machine backup file on the internal hard drive. They should always be put on an external drive. As when the internal fails you lose everything. Which is what I suspect has happened.
More then likely your internal drive is failing. the only options to get a new internal drive and a SATA to USB adapter. Install the new drive inside the system abd install OS X on it. Then once that is finished and you are booting from it connect the old drive to the system with the SATA to USB adapter and copy your files off the old drive. That is if you can.

How to deal with security when migrating application from weblogic 5.1 to weblogic 6.1?

Dear All,
I have one statement int weblogic 5.1 weblogic.propertis as follow,
weblogic.security.realmClass=com.tbcn.security.realm.TestRealm
but after converting to weblogic 6.1 there are no corresponding statement in
the file config.xml. And when i start the new application, error occured.
what should I do?
The error message is:
<2001/8/27 am 11:33:42> <Notice> <Management> <Loading configuration file
.\config\tbcn\config.xml
<2001/8/27 am 11:33:49> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initializatio
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception

Dear Satya,
My weblogic propertis file as follow,
# CORE PROPERTIES
# You should set these before you start the WebLogic Server the first time.
# If you need more instructions on individual properties in this
# section, check the same section in the Optional Properties, where
# we've left the long explanations. Or, better yet, go to our
# website and read all about properties, at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# CORE SYSTEM PROPERTIES
# TCP/IP port number at which the WebLogic Server listens for connections
weblogic.system.listenPort=7001
# CORE SECURITY-RELATED PROPERTIES
# Read important information about security at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# REQUIRED: The system password MUST be set in order to start the
# WebLogic Server. This password is case-sensitive, at least 8 characters.
# The username for the privileged user is ALWAYS "system".
# This username and password also includes httpd access (see
# HTTPD properties below).
weblogic.password.system=12345678
# RECOMMEND Set to 'everyone' if HTTPD is enabled
weblogic.allow.execute.weblogic.servlet=everyone
# Set individual ACLs to restrict access to HTTP-related resources,
# such as the Administration servlets.
# To make your own servlets generally available, follow this
# pattern (provide a weblogic.allow.execute) for your packages and
# set ACLs as appropriate.
# CORE SECURITY-RELATED PROPERTIES FOR SSL
# Read important information about SSL at:
# http://www.weblogic.com/docs51/classdocs/API_secure.html
# Enable SSL
# (default if property not defined is false)
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
# Servlets for SSL
# Authentication servlet for creating tokens for applets
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
ervlet
# Limits number of unclaimed stored tokens
weblogic.security.certificateCacheSize=3
# Capture CA root of client servlet
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
# Certificates for SSL
# Name of acceptable CA roots
# For client authentication change value to a valid .pem file
#weblogic.security.clientRootCA=SecureServerCA.pem
# Server certificates for SSL
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
# registration for certificate generator servlet
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
# CORE HTTPD ADMINISTRATIVE PROPERTIES
# True permits the HTTPD to run (default)
# Uncomment this property to disable HTTPD
#weblogic.httpd.enable=false
# If authentication is required, add username/password for each user
# who will be included in an ACL, as in this commented-out example:
#weblogic.password.peter=#8gjsL4*
# SYSTEM PROPERTIES
# System properties in this section are set to system defaults
# Performance pack. The shared library must be accessible from your
# PATH (NT) or from your shared library path (UNIX; the name of the
# variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
weblogic.system.nativeIO.enable=true
# Outputs logging information to the console as well as to the log file
weblogic.system.enableConsole=true
# Sets the directory or URL for the WebLogic Admin help pages
# The help pages are shipped in the "docs/adminhelp" directory, in the
# default document root in public_html
weblogic.system.helpPageURL=/weblogic/myserver/public_html/docs51/adminhelp/
# If you prefer to access the most recent help pages, you can do so online
# by commenting out the previous property and uncommenting this one:
#weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
# Properties for tuning the server's performance
# Number of WebLogic Server execute threads.
weblogic.system.executeThreadCount=15
# Other optional system properties
# Limits size of weblogic.log (in K) and versions old log
weblogic.system.maxLogFileSize=1024
# Adjust minimum length of password
weblogic.system.minPasswordLen=8
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
# CLUSTER-SPECIFIC PROPERTIES
# Cluster-specific properties in this section are set to system defaults.
# CLUSTER USERS: Note that ALL Cluster-specific properties should be set
# in the per-cluster properties file ONLY.
# Time-to-live (number of hops) for the cluster's multicast messages
# (default 1, range 1-255).
#weblogic.cluster.multicastTTL=1
# Sets the load-balancing algorithm to be used between
# replicated services if none is specified. If not specified,
# round-robin is used.
#weblogic.cluster.defaultLoadAlgorithm=round-robin
# SERVER-SPECIFIC CLUSTER PROPERTIES
# Cluster-related properties in this section are set to system defaults.
# CLUSTER USERS: Note that these server-specific cluster-related properties
# should be set in the per-server properties file ONLY.
# Sets the weight of the individual server for the weight-based
load-balancing.
# Range is 0 - 100.
# Larger numbers increase the amount of traffic routed to this server.
#weblogic.system.weight=100
# SYSTEM STARTUP FILES - Examples
# CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
# objects should be registered in the per-server properties file.
# All other startup classes should be registered in the per-cluster
# properties file.
# For more info on writing and using startup file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a startup class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.startupClass.[virtual_name]=[full_pathname]
# Add arguments for the startup class
#weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
# This example shows the entry for examples/t3client/StartupQuery.java
#weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
#weblogic.system.startupArgs.doquery=\
# query=select * from emp,\
# db=jdbc:weblogic:pool:demoPool
# SYSTEM SHUTDOWN FILES - Examples
# For more info on writing and using shutdown file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a shutdown class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
# Add arguments for the shutdown class
#weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
# This example shows the entry for examples/t3client/ShutdownTest.java
#weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
#weblogic.system.shutdownArgs.ShutdownTest=\
# outfile=c:/temp/shutdown.log
# SECURITY-RELATED PROPERTIES FOR WORKSPACES
# For backward compatibility, the following entries disable Access
# Control on Workspaces
weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.write.weblogic.workspace=everyone
# JOLT FOR WEBLOGIC PROPERTIES
# These properties configure a BEA Jolt connection pool for use with
# the simpapp and bankapp examples, and register a servlet for use with
# with the simpapp example. The default server address provided here
# points to a public TUXEDO server that is hosted by BEA for use with
# this example.
# Servlet registration for simpapp example:
#weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
t
# Pool creation and cleanup
# note this example is set up to work with the public
# demo TUXEDO server available from BEA's website:
#weblogic.system.startupClass.demojoltpoolStart=\
# bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
#weblogic.system.startupArgs.demojoltpoolStart=\
# poolname=demojoltpool,\
# appaddrlist=//beademo1.beasys.com:8000,\
# failoverlist=//beademo1.beasys.com:8000,\
# minpoolsize=1,\
# maxpoolsize=3
#weblogic.system.shutdownClass.demojoltpoolStop=\
# bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
#weblogic.system.shutdownArgs.demojoltpoolStop=\
# poolname=demojoltpool
# WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
# The registrations enable a BEA IIOP connection pool and
# register servlets for use with the simpapp and university examples.
# Configure for your environment and uncomment to use.
# Uncommenting these properties requires WebLogic Enterprise Connectivity
# and an operating WebLogic Enterprise Server.
# Servlet registration for simpapp servlet example
#weblogic.httpd.register.SimpappServlet=\
# examples.wlec.servlets.simpapp.SimpappServlet
#weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
# Servlet registration for simpapp EJB example
# (You'll need to add the wlec_ejb_simpapp.jar to the
# weblogic.ejb.deploy property in this file.)
#weblogic.httpd.register.ejbSimpappServlet=\
# examples.wlec.ejb.simpapp.ejbSimpappServlet
#weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
# Pool creation and cleanup for the simpapp example
#weblogic.CORBA.connectionPool.simplepool=\
# appaddrlist=//wlehost:2468,\
# failoverlist=//wlehost:2468,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# domainname=simpapp
# Servlet registration for university Servlet example:
#weblogic.httpd.register.UniversityServlet=\
# examples.wlec.servlets.university.UniversityServlet
#weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
# Pool creation and cleanup for the University example:
#weblogic.CORBA.connectionPool.Univpool=\
# appaddrlist=//wlehost:2498,\
# failoverlist=//wlehost:2498,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# apppassword=wlepassword,\
# domainname=university
# WEBLOGIC FILE PROPERTIES
# Maps a volume name to a path, for client file read/write
#weblogic.io.fileSystem.[volumeName]=[fullPathName]
# WEBLOGIC JMS DEMO PROPERTIES
# CLUSTER USERS: Note that ALL JMS deployment should be done in the
# per-cluster properties file ONLY.
# You set up a JDBC connection pool if you want persistent messages
# (including durable subscriptions). To use JMS and EJBs in the same
# transaction, both must use the same JDBC connection pool. Uncomment
# the following property to use the default JDBC connection pool
# 'demo', which is defined in the Demo connection pool section of this file.
#weblogic.jms.connectionPool=demoPool
# The JMS Webshare example demonstrates how the ClientID for a
# durable subscriber is configured in the connection factory:
#weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
#weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
#weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
#weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
# The JMS trader example shows how to use JMS with an EJB. In addition
# to uncommenting the following properties, you must also set up and
# deploy the EJB example examples.ejb.basic.statelessSession.Trader in
# ejb_basic_statelessSession.jar to try out this JMS example:
#weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
#weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
#weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
#weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
# Registers the underlying servlet
#weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
# These properties are used with the ServerReceive JMS example,
# which demonstrates how to establish a JMS message consumer
# in a startup class:
#weblogic.system.startupClass.serverReceive=\
# examples.jms.startup.ServerReceive
#weblogic.system.startupArgs.serverReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
# These properties are used with the PoolReceive JMS example,
# which demonstrates how to establish a pool of JMS message consumers
# in a startup class:
#weblogic.system.startupClass.poolReceive=\
# examples.jms.startup.PoolReceive
#weblogic.system.startupArgs.poolReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
#weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
# WEBLOGIC RMI DEMO PROPERTIES
# CLUSTER USERS: Note that pinned RMI objects should be registered
# in the per-server properties file ONLY. All other RMI startup
# classes should be registered in the per-cluster properties file.
# Remote classes registered at startup after the pattern:
#weblogic.system.startupClass.[virtualName]=[fullPackageName]
# These examples can be compiled to see RMI in action. Uncomment to use:
#weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
#weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
#weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
# WEBLOGIC EJB DEMO PROPERTIES
# CLUSTER USERS: Note that ALL EJB deployment should be done in the
# per-cluster properties file ONLY.
# See WebLogic Demo Connection Pool below for a connection pool
# to use with these examples.
# Deploys EJBeans. Uncomment the appropriate lines below and
# modify DBMS-related info and paths to match your particular installation:
# TBCN EJB PROPERTIES
weblogic.ejb.deploy=\
C:/weblogic/myserver/AccountSB.jar, \
C:/weblogic/myserver/AddressEntryDet.jar, \
C:/weblogic/myserver/AddressEntry.jar, \
C:/weblogic/myserver/Affiliate.jar, \
C:/weblogic/myserver/ContactPerson.jar, \
C:/weblogic/myserver/ContactSB.jar, \
C:/weblogic/myserver/Factory.jar, \
C:/weblogic/myserver/FactorySups.jar, \
c:/weblogic/myserver/LoginUsers.jar, \
c:/weblogic/myserver/Member.jar, \
c:/weblogic/myserver/MemberQuotaUsage.jar,\
c:/weblogic/myserver/MemberToCategory.jar,\
c:/weblogic/myserver/Organization.jar, \
c:/weblogic/myserver/Person.jar, \
c:/weblogic/myserver/QuotaType.jar,\
c:/weblogic/myserver/Registration.jar, \
c:/weblogic/myserver/TempAccounts.jar, \
c:/weblogic/myserver/TempDomain.jar, \
c:/weblogic/myserver/UserAccount.jar, \
c:/weblogic/myserver/UserRole.jar, \
c:/weblogic/myserver/BuyerProducts.jar, \
c:/weblogic/myserver/Catalog.jar, \
c:/weblogic/myserver/Categories.jar, \
c:/weblogic/myserver/CategoryToCategory.jar, \
c:/weblogic/myserver/CountryToCategory.jar, \
c:/weblogic/myserver/InvitedMember.jar, \
c:/weblogic/myserver/ProductOrigin.jar, \
c:/weblogic/myserver/ProductOtherFee.jar,\
c:/weblogic/myserver/ProductSups.jar, \
c:/weblogic/myserver/Products.jar,\
c:/weblogic/myserver/ProductToCategory.jar, \
c:/weblogic/myserver/SecondaryQcEntry.jar, \
c:/weblogic/myserver/CodeClass.jar,\
c:/weblogic/myserver/ConfirmationSB.jar, \
c:/weblogic/myserver/PurchasedPackage.jar,\
c:/weblogic/myserver/RejectReasonCode.jar, \
c:/weblogic/myserver/ServiceOrder.jar,\
c:/weblogic/myserver/ServiceOrderLog.jar,\
c:/weblogic/myserver/ServiceOrderState.jar,\
c:/weblogic/myserver/ServiceOrderType.jar,\
c:/weblogic/myserver/ServicePackageDetails.jar, \
c:/weblogic/myserver/ServicePackage.jar, \
c:/weblogic/myserver/ServicePayment.jar, \
c:/weblogic/myserver/ServiceReqSB.jar, \
c:/weblogic/myserver/TAM.jar, \
c:/weblogic/myserver/SubscriptionEB.jar, \
c:/weblogic/myserver/PostingCategoryEB.jar, \
c:/weblogic/myserver/PostingBrowsedEB.jar, \
c:/weblogic/myserver/PostingInfoEB.jar, \
c:/weblogic/myserver/TransactionLogEB.jar, \
c:/weblogic/myserver/PostingSB.jar
#weblogic.ejb.deploy=\
# d:/weblogic/myserver/ejb_basic_beanManaged.jar, \
# d:/weblogic/myserver/ejb_basic_containerManaged.jar, \
# d:/weblogic/myserver/ejb_basic_statefulSession.jar, \
# d:/weblogic/myserver/ejb_basic_statelessSession.jar, \
# d:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
# d:/weblogic/myserver/ejb_extensions_readMostly.jar, \
# d:/weblogic/myserver/ejb_subclass.jar, \
# d:/weblogic/myserver/jolt_ejb_bankapp.jar
# Servlet used by the EJB basic beanManaged example
# Uncomment to use:
weblogic.httpd.register.beanManaged=\
examples.ejb.basic.beanManaged.Servlet
# Add a list of users (set the password with
weblogic.password.[username]=XXX)
# to set an ACL for this servlet:
#weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
#weblogic.password.user1=user1Password
#weblogic.password.user2=user2Password
# WEBLOGIC XML DEMO PROPERTIES
# These properties are required to run the XML examples.
# Uncomment to use.
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
#weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
# BizTalk example properties
#weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
#weblogic.jms.queue.tradeError=biztalk.jms.tradeError
#weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
dapter
#weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
# WEBLOGIC ZAC DEMO PROPERTIES
# These registrations enable the ZAC Publish Wizard.
weblogic.zac.enable=true
# Set the publish root for a WebLogic Server. Edit and
# uncomment to use.
#weblogic.zac.publishRoot=d:/weblogic/zac
# Set an ACL for each package you publish. The [name] is
# the "Package name" you assign in the ZAC Publish Wizard.
# Publish a package, edit this property, and uncomment to use.
#weblogic.allow.read.weblogic.zac.[name]=[user list]
#weblogic.allow.write.weblogic.zac.[name]=system
# HTTPD ADMINISTRATIVE PROPERTIES
# Enables logging of HTTPD info in common log format and
# sets the log file name (default is "access.log" in "myserver")
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
# Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
weblogic.httpd.enableEvents=false
# Enables HTTP sessions
weblogic.httpd.session.enable=true
# Sets an optional cookie name. The default name is "WebLogicSession".
# Prior to version 4.0, the default was "TengahSession". To make
# this backward compatible with cookies generated from previous
# installations, you should set this property to "TengahSession".
# Uncomment this line and set this to any string of your choice,
# or comment out this property to use the default.
#weblogic.httpd.session.cookie.name=WebLogicSession
# MIME types
weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.image/gif=gif
weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.application/pdf=pdf
weblogic.httpd.mimeType.application/zip=zip
weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.application/x-java-archive=jar
weblogic.httpd.mimeType.application/x-java-serialized-object=ser
weblogic.httpd.mimeType.application/octet-stream=exe
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
# In seconds, the keep-alive for HTTP and HTTPS requests
weblogic.httpd.http.keepAliveSecs=60
weblogic.httpd.https.keepAliveSecs=120
# WEBLOGIC JDBC DRIVER PROPERTIES
# Enables JDBC driver logging and sets the file name for the log
# The weblogic.jdbc.logFile is placed in the per-server
# directory (default is "myserver")
weblogic.jdbc.enableLogFile=false
weblogic.jdbc.logFileName=jdbc.log
# WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# For creating JDBC connection pools. This example shows a connection
# pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
# to use 4 JDBC connections (with a potential for up to 10 connections,
# incremented by two at a time, with a delay of 1 second between each
# attempt to connect to the database), to an Oracle database server called
# "DEMO." If more than 4 connections are opened, after 15 minutes, unused
# connections are dropped from the pool until only 4 connections remain
open.
# Every 10 minutes, any unused connections in the pool are tested and
# refreshed if they are not viable.
#weblogic.jdbc.connectionPool.oraclePool=\
# url=jdbc:weblogic:oracle,\
# driver=weblogic.jdbc.oci.Driver,\
# loginDelaySecs=1,\
# initialCapacity=4,\
# maxCapacity=10,\
# capacityIncrement=2,\
# allowShrinking=true,\
# shrinkPeriodMins=15,\
# refreshMinutes=10,\
# testTable=dual,\
# props=user=SCOTT;password=tiger;server=DEMO
# Get more details on each argument for this property in the
# Administrators Guide on setting properties at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# Set up ACLs for this connection pool with the following:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
# guest,joe,jill
#weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
#weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
# This property is an ACL that specifies the users who can
# create dynamic connection pools:
#weblogic.jdbc.connectionPoolcreate.admin=joe,jill
# Read more about setting up and using connection pools in the
# developers guide for WebLogic JDBC at:
# http://www.weblogic.com/docs51/classdocs/API_jdbct3.html#T5a
# TBCN JDBC CONNECTION POOL MANAGEMENT
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@202.109.102.151:1521:tbcn,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=2,\
maxCapacity=10,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=tbcn;password=ca91768
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
weblogic.jdbc.TXDataSource.oracleDataSource=oraclePool
weblogic.jdbc.DataSource.oracleReadOnlyDataSource=oraclePool
# WEBLOGIC DEMO CONNECTION POOL PROPERTIES
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# This connection pool uses the sample Cloudscape database shipped
# with WebLogic. Used by the EJBean, JHTML, JSP and JMS examples.
# Uncomment to use:
#weblogic.jdbc.connectionPool.demoPool=\
# url=jdbc:cloudscape:demo,\
# driver=COM.cloudscape.core.JDBCDriver,\
# initialCapacity=1,\
# maxCapacity=2,\
# capacityIncrement=1,\
# props=user=none;password=none;server=none
# Add a TXDataSource for the connection pool:
#weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.demoPool=demoPool
# Add an ACL for the connection pool:
#weblogic.allow.reserve.weblogic.jdbc.connectionPool.demoPool=everyone
# WEBLOGIC HTTP SERVLET PROPERTIES
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
# WebLogic offers different types of servlets for various uses.
# Classpath servlet registration
# The ClasspathServlet is used to serve classes from
# the system CLASSPATH. It is used by applets to load
# classes they depend upon, and is registered against
# the virtual name 'classes' here by default. This means
# you should set your applet codebase to "/classes".
# You can register multiple virtual names for this servlet.
# Note that it can also be used to serve other
# resources/files from the system CLASSPATH.
# Don't confuse the ClasspathServlet with the ServletServlet. The
# ClasspathServlet is used for serving classes for client-side Java only.
# The ServletServlet is used to invoke unregistered servlets.
# See the Administrators Guide "Setting up WebLogic as an HTTP server"
# http://www.weblogic.com/docs51/admindocs/http.html#classfile for more
info.
weblogic.httpd.register.classes=weblogic.servlet.ClasspathServlet
# We also set an open ACL for everyone to call the ClasspathServlet
# so that applets work without requiring further changes.
weblogic.allow.execute.weblogic.servlet.classes=everyone
# File servlet registration
# FileServlet searches below the documentRoot for the requested file
# and serves it if found. If the requested file is a directory,
# FileServlet will append the defaultFilename to the requested path
# and serve that file if found.
weblogic.httpd.register.file=weblogic.servlet.FileServlet
weblogic.httpd.initArgs.file=defaultFilename=index.html
weblogic.httpd.indexFiles=zh_TW/index.htm
# ServerSideInclude servlet registration
# SSIServlet searches below the documentRoot for the
# requested .shtml file and serves it if found.
weblogic.httpd.register.*.shtml=weblogic.servlet.ServerSideIncludeServlet
# Example URL: http://localhost:7001/portside/welcome.shtml
# for the file /weblogic/myserver/public_html/portside/welcome.shtml
# PageCompileServlet (used by JHTML)
# See the information below under WebLogic JHTML
# JSPServlet (used by JSP)
# See the information below under WebLogic JSP
# ServletServlet registration
# Allows unregistered servlets in the servlet classpath (see Servlet
# reload properties below) to be r

Sql Error in Select statement when doing subquery

Hi,
I am trying to see what the error is in the subquery part of the select statement.
Subquery should be fetching the safety_stock_quantity based on the MAX(effectivity_date).
Any suggestions?
SELECT kbn.last_update_date,itm.segment1,itm.description,kbn.kanban_card_number,kbn.kanban_size,
 (SELECT msc.safety_stock_quantity
FROM mtl_safety_stocks msc
WHERE msc.effectivity_date = (select MAX(msc2.effectivity_date)
 from mtl_safety_stocks msc2
 where msc2.inventory_item_id = itm.inventory_item_id
 and msc2.organization_id = itm.organization_id)
 AND msc.inventory_item_id = itm.inventory_item_id
 AND msc.organization_id = itm.organization_id
FROM mtl_system_items_b itm
,mtl_onhand_quantities_detail moqd
 ,mtl_safety_stocks msc
 ,mtl_kanban_card_activity kbn
WHERE itm.inventory_item_id = kbn.inventory_item_id
AND itm.organization_id = kbn.organization_id
AND itm.inventory_item_id = moqd.inventory_item_id
AND itm.organization_id = moqd.organization_id
AND moqd.subinventory_code = kbn.source_subinventory
 AND kbn.card_status = 1
 AND kbn.supply_status = 5
 AND msc.inventory_item_id = itm.inventory_item_id
 AND msc.organization_id = itm.organization_id
GROUP BY
kbn.last_update_date,itm.segment1,itm.description,kbn.kanban_card_number,kbn.kanban_size;
Thanks
Pravn

Hi, Pravn,
Remember the ABC's of GROUP BY:
When you use a GROUP BY clause and/or an aggregate fucntion, then every item in the SELECT clause must be:
(A) an Aggregate function,
(B) one of the "group By" expressions,
(C) a Constant, or
(D) something that Depends entirely on the above. (For example, if you "GROUP BY TRUNC(dt)", you can "SELECT TO_CHAR (TRUNC(dt), 'Mon-DD')").
There's a GROUP BY clause in your main query, so every item in the main SELECT clause must be one of the above. The last item, the unnamed scalar sub-query, is none of the above.
How can you fix this problem? That depends on your data, the results you want, and perhaps on your Oracle version. If you'd like help, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved. Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Always say which version of Oracle you're using.
You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (including, but limited to, actual code) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.

Syntax error using try statement in WLST

Hi All,
I have a WLST script to create some JMS resources.
I want to implement exception handling in such a way that if the script fails at any point, all the changes done should be reverted back.
However, whenever I am trying to put a try block, the script is throwing syntax error on the first line after the try statement.
Please find below the script I am using. Please suggest
import sys
from java.lang import System
*# Putting a try statement here results in a syntax error at the below line*
print "Starting the script ..."
connect('weblogic',password,'t3://osbdev:7001')
edit()
startEdit()
servermb=getMBean("Servers/osb_server")
if servermb is None:
print 'Value is Null'
else:
+# Creating the JMS Server+
jmsserver1mb = create('WLSTJMSServer','JMSServer')
jmsserver1mb.addTarget(servermb)
+# Creating the JMS Module+
jmsMySystemResource = create("WLSTJmsSystemResource","JMSSystemResource")
jmsMySystemResource.addTarget(servermb)
subDep1mb = jmsMySystemResource .createSubDeployment('WLSTJMSSubDeployment')
subDep1mb.addTarget(jmsserver1mb)
theJMSResource = jmsMySystemResource.getJMSResource()
connfact1 = theJMSResource.createConnectionFactory('WLSTConnFact1')
connfact1.setJNDIName('jms.WLSTConnFact1')
connfact1.setSubDeploymentName('WLSTJMSSubDeployment')
print "Creating WLSTQueue1..."
jmsqueue1 = theJMSResource.createQueue('WLSTJMSQueue1')
jmsqueue1.setJNDIName('jms.WLSTJMSQueue1')
jmsqueue1.setSubDeploymentName('WLSTJMSSubDeployment')
print "Creating WLSTQueue2..."
jmsqueue2 = theJMSResource.createQueue('WLSTJMSQueue2')
jmsqueue2.setJNDIName('jms.WLSTJMSQueue2')
jmsqueue2.setSubDeploymentName('WLSTJMSSubDeployment')
*# try statement is working at only this point of the program*
try:
save()
activate(block="true")
print "script returns SUCCESS"
except:
save()
cancelEdit(defaultAnswer="y")
print "Error while trying to connect to server !!!"
print "Unexpected error: ", sys.exc_info()[0]
dumpStack()
raise
Edited by: Chintan Parekh on Mar 16, 2011 7:06 AM

Hi Chintan,
Try doing copy pasting the below code, you have to hit the tab or space after try or except to create its block and keep an eye on the alinement's of it.
try:
     save()
     activate(block="true")
     print "script returns SUCCESS"
except:
     save()
     cancelEdit(defaultAnswer="y")
     print "Error while trying to connect to server !!!"
     print "Unexpected error: ", sys.exc_info()[0]
     dumpStack()Also I made the alinement's properly and the script is running properly with out any error.
print "Starting the script ..."
connect('weblogic','weblogic','t3://localhost:7001')
edit()
startEdit()
servermb=getMBean("Servers/AdminServer")
if servermb is None:
     print 'Value is Null'
else:
     # Creating the JMS Server
     jmsserver1mb = create('WLSTJMSServer','JMSServer')
     jmsserver1mb.addTarget(servermb)
     # Creating the JMS Module
     jmsMySystemResource = create("WLSTJmsSystemResource","JMSSystemResource")
     jmsMySystemResource.addTarget(servermb)
     subDep1mb = jmsMySystemResource .createSubDeployment('WLSTJMSSubDeployment')
     subDep1mb.addTarget(jmsserver1mb)
     theJMSResource = jmsMySystemResource.getJMSResource()
     connfact1 = theJMSResource.createConnectionFactory('WLSTConnFact1')
     connfact1.setJNDIName('jms.WLSTConnFact1')
     connfact1.setSubDeploymentName('WLSTJMSSubDeployment')
     print "Creating WLSTQueue1..."
     jmsqueue1 = theJMSResource.createQueue('WLSTJMSQueue1')
     jmsqueue1.setJNDIName('jms.WLSTJMSQueue1')
     jmsqueue1.setSubDeploymentName('WLSTJMSSubDeployment')
     print "Creating WLSTQueue2..."
     jmsqueue2 = theJMSResource.createQueue('WLSTJMSQueue2')
     jmsqueue2.setJNDIName('jms.WLSTJMSQueue2')
     jmsqueue2.setSubDeploymentName('WLSTJMSSubDeployment')
# try statement is working at only this point of the program
try:
     save()
     activate(block="true")
     print "script returns SUCCESS"
except:
     save()
     cancelEdit(defaultAnswer="y")
     print "Error while trying to connect to server !!!"
     print "Unexpected error: ", sys.exc_info()[0]
     dumpStack()Below is the output
java weblogic.WLST test.py
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Starting the script ...
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'Domain_7001'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
You already have an edit session in progress and hence WLST will
continue with your edit session.
Starting an edit session ...
Started edit session, please be sure to save and activate your
changes once you are done.
MBean type JMSServer with name WLSTJMSServer has been created successfully.
MBean type JMSSystemResource with name WLSTJmsSystemResource has been created successfully.
Creating WLSTQueue1...
Creating WLSTQueue2...
Saving all your changes ...
Saved all your changes successfully.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed.
Activation completed
script returns SUCCESSRegards,
Ravish Mody
http://middlewaremagic.com/weblogic
Come, Join Us and Experience The Magic…
Edited by: Ravish Mody-MiddewareMagic on Mar 16, 2011 8:33 PM

Cant See RTF Files in JAR but can when running program from command prompt

posted August 16, 2005 08:26 AM
Hi ALL:
I have a Java Swing APP. It has Menus which displays information through File I/O in a JEditorPane.
When I run my program from Command Prompt using "java myApp" it shows these RTF Files as it is.
However when I run them after converting Directory into a Executable JAR FILE, it fails. I get a blank JEditorPane. My RTF files are in the CORRECT PATH, just dont get displayed. Rest of the APP works fine.
Chetan
any suggetsions

posted August 16, 2005 08:26 AM
Hi ALL:
I have a Java Swing APP. It has Menus which displays information through File I/O in a JEditorPane.
When I run my program from Command Prompt using "java myApp" it shows these RTF Files as it is.
However when I run them after converting Directory into a Executable JAR FILE, it fails. I get a blank JEditorPane. My RTF files are in the CORRECT PATH, just dont get displayed. Rest of the APP works fine.
Chetan
any suggetsions

Force some statements when exiting program

Hello,
I have created a class,
I want that when the program exits,
it should have a code that will be done before the program exits.
The following is for initialization :
public class myClass {
Static {
... do something
// what should I put here for finalization ?
Thanks :)

addShutdownHook doesn't work for some conditions
(it seems to be work for simple pure java)
If I do :
JOptionPane.showMessageDialog ... - doesn't work
System.out.println ... - work !!!
Thanks :)A quote from one of the references found by the following search
Because shutdown hooks run as threads, you must use thread-safe programming techniques. Otherwise you risk having threads interfere with each other. Also, it's wise to design your application for simple and fast shutdown processing. For example, you might run into trouble if your application uses services during shutdown that are themselves in the processing of being shut down.
http://www.google.com/search?q=java%2bshutdown%2bhook

Error in segment COMM_PR_SHTEXT when downloading products from ERP to CRM

Hi experts
I get below error when downloading materials from ERP to CRM.
"Data for set COMM_PR_SHTEXT may only be changed in the original system Q10CLNT310" But the material and the short texts has been created in ERP, hence I can't change them in CRM. When I look in table COMM_PRODUCT field LOGSYS has value 'Q01CLNT300' which is our ERP system. So as far as I see it, our original system is Q01CLNT300 and not Q10CLNT310 as it says in the errormessage. The result is that the sales org data we are trying to download to CRM are not downloaded.
Can you help me on this one?
Best regards
Jørgen Jensen

Hello Jørgen ,
Q10CLNT310 --> Is this you old ERP system?
One possibility for this error would be some product related tables contain the wrong LOGSYS value i,e Q10CLNT310.
Also,check LOGSYS for table COMM_PRSHTEXT.
This generally happens when data has been copied by means of client copy , and you do not run txn:BDLS.
In txn:BDLS ,you can change the LOGSYS for a particular table or all relevant tables.
You can execute in in Test mode, to check the affected tables.
Hope this helps!
Best Regards,
Shanthala Kudva.

Error in Abap code when combining data from two tables

Hi,
I got error in my code when i try to select data based on two tables
error message Unknown column name "(" field list. field list. field list. field list.
select ( WLK1~ARTNR )
 into ZOXE1D0041-ZZPROMO
 from WLK1 INNER JOIN T001W
 ON WLK1FILIA = T001WKUNNR.
 where WLK1-PFLKN NE 'P' AND
 WLK1-QUELL NE '2'.
Table 1 WLK1
ARTNR FILIA PFLKN QUELL
001 C001 P 2
002 C001 A 1
Table 2 T001W
KUNNR WERKS
C001 P001
My requirement is to extract from article number from table WLK1 where the customer number (FILIA) matches with Customer number from (T001W) and plant (WERKS).
In conclusion I like to have this only this row
ARTNR FILIA PFLKN QUELL
002 C001 A 1

Hi
You need to append every article number after each select is performed
is this an intermal table ZOXE1D0041 with header line ? if yes
then do this way
select WLK1~ARTNR
into ZZARTICLE
from WLK1 INNER JOIN T001W
ON WLK1FILIA = T001WKUNNR
where WLK1~PFLKN NE 'P' AND
WLK1~PFLKN NE 'S' AND
WLK1~QUELL NE '2'.
ZOXE1D0041-ZZLISTARTICLE = ZZARTICLE.
Append ZOXE1D0041. " <edited>
endselect.
then ZOXE1D0041 will have all article numbers.
Edited by: Sonal Patel on Sep 5, 2009 10:27 AM

5% to 15% of sites fail to open due to 706 error. Started happening when I upgraded from FF 3.22; getting worse and worse with each FF 11 upgrade.

E.g., reading an online newspaper. I will open many tabs with different articles. About 1 out of 10 tabs will have a 706 error, which goes away when I click the reload button.
It's most noticeable then, but it occasionally happens (1 out of 10 sites) when I click a single link off my bookmarks menu, or manually enter a URL.
I think FF is not y waiting long enough for some kind of response from the remote link.
Like I said, this started happening when I upgraded from 3.22

All the page says is “failure to read response”
No proxy server.
I’ve got lots of add-ons: NoScript, BeefTaco, Ghostery, etc. How do I get a list for you automatically?
Here’s the response, if you can figure out who or what is generating it.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>706</title>
<meta http-equiv="Cache-Control" content="no-cache"/>
</head>
<body>

Failure to Read Response

</body>
</html

Error in merge statement when trying to impliment SCD type 2 using merge...

Hi ,
I'm trying to impliment SCD type 2 using Merge using below blog as reference but sime how it is erroring out with error
http://www.made2mentor.com/2013/08/how-to-load-slowly-changing-dimensions-using-t-sql-merge/
Msg 207, Level 16, State 1, Line 40
Invalid column name 'Current'.
Msg 207, Level 16, State 1, Line 38
Invalid column name 'Current'.
Msg 207, Level 16, State 1, Line 47
Invalid column name 'Current'.
Here is the code below...
--Create Temporaty table to hold dimension records
IF OBJECT_ID('tempdb..#DimVirtualQueue') IS NOT NULL
DROP TABLE #DimVirtualQueue;
CREATE TABLE #DimVirtualQueue
( [VQ_name] [varchar](50) NULL,
[contact_type] [varchar](50) NULL,
[center_node_id] [int] NULL,
[sed_id] [datetime] NULL,
[eed_id] [datetime] NULL,
[insert_date] [datetime] NULL,
[Current] [char](1) NOT NULL
INSERT INTO #DimVirtualQueue(VQ_name, contact_type, center_node_id, sed_id, eed_id, insert_date,[Current] )
SELECT VQ_name, contact_type, center_node_id, sed_id , eed_id,GETDATE(),'Y'
FROM
( --Declare Source and Target tables.
MERGE dbo.tblSwDM_dim_VQ_test AS TARGET
--Source
USING (SELECT
RTRIM(LTRIM(Stage.RESOURCE_NAME)) AS VQ_name,
'Unknown' AS contact_type,
0 AS center_node_id,
CONVERT(INT,CONVERT(VARCHAR(8),GMT_START_TIME,112)) AS sed_id,
CONVERT(INT,CONVERT(VARCHAR(8),ISNULL(GMT_END_TIME,'2070-01-01'),112)) AS eed_id,
GETDATE() AS insert_date
FROM dbo.tblGenesys_stg_RESOURCE_ Stage
WHERE resource_type = 'queue'
AND resource_subtype = 'VirtualQueue'
AND NOT EXISTS (SELECT 1 FROM dbo.tblSwDM_dim_VQ AS dim
WHERE RTRIM(LTRIM(stage.RESOURCE_NAME)) = RTRIM(LTRIM(dim.vq_name))) ) SOURCE
ON TARGET.VQ_name = SOURCE.VQ_name
WHEN NOT MATCHED BY TARGET
THEN
INSERT ( VQ_name, contact_type, center_node_id, sed_id, eed_id, insert_date,[Current] )
VALUES (SOURCE.VQ_name,SOURCE.contact_type,SOURCE.center_node_id,SOURCE.sed_id,SOURCE.eed_id,SOURCE.insert_date,'Y')
WHEN MATCHED AND TARGET.[Current] = 'Y'
AND EXISTS (
SELECT SOURCE.VQ_name
EXCEPT
SELECT TARGET.VQ_name
--Expire the records in target if exist in source.
THEN UPDATE SET TARGET.[Current] = 'N',
TARGET.[eed_id] = SOURCE.eed_id
OUTPUT $Action ActionOut, SOURCE.VQ_name,SOURCE.contact_type,SOURCE.center_node_id,SOURCE.sed_id,SOURCE.eed_id) AS MergeOut
WHERE MergeOut.ActionOut = 'UPDATE';
--Insert data into dimension
INSERT tblSwDM_dim_VQ_test
SELECT VQ_name,contact_type,center_node_id,sed_id,eed_id,insert_date,[Current] FROM #DimVirtualQueue
Any help to resolve issue is appreciated...
Thanks,
Vishal..

You need to show the DDL of your target table: dbo.tblSwDM_dim_VQ_test.
Do you have a column named [Current] in this table?

Error using SHIFT statement when migrating program from R/3 4.7 to ECC6.0

Similar Messages

Maybe you are looking for