Error using the distiller in Acrobat Professional 8 to create a PDF from an Aspose.Words .doc docume

Hi,
We use Aspose.Words to create Microsoft Word (.doc) documents from one of our Intranet applications. These documents are then further modified in Microsoft Word and are then converted to PDF files using the distiller in Acrobat 8 Professional.
The distiller ends with a message saying it encountered an error and could not complete the conversion.
If we create a document directly in Microsoft Word and then use the distiller to convert it to a PDF, the distiller runs just fine.
Would you have any idea of what might be causing this problem? The distiller gives no indication of the cause of the problem, only that is one!
I also tried using the Create Adobe PDF Online service to convert the same Aspose.Words .doc file and it worked fine.
Any help you can give on this would be most appreciated!
Thanks!

Thanks for your response. I mistakenly referred to the distiller.
We are using PDF Maker in Word. It appears as an icon on the Word toolbar once Acrobat Professional 8 has been installed. When I open the Aspose.Words .doc document in Word and click on the toolbar icon, PDF Maker launches and starts the conversion program and then Microsoft Word ends with their standard message "Microsoft Word has encountered an error and needs to close...".
I also tried going into Acrobat Professional 8 and chose File --> Create PDF --> From File off the menu bar. I selected the same Aspose.Words .doc document file to convert and once again the conversion process started, but this time it gave me the following error message:
"Unable to convert PDF file.
Invalid page range or conversion setting parameters."
When I clicked on OK to clear the message, I got the following:
"Acrobat could not open 'xxxxx.doc' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF or use the Acrobat toolbar found in Microsoft applications."
I assume that since the on-line service can successfully convert this document, it is a supported file type and is not damaged (not sent as an email attachment, so no issue there). I tried opening the document in Word and printing it to Adobe PDF and that worked, but my users really like the convenience of the Acrobat toolbar so I would like them to be able to use it to create PDF files from Aspose.Words documents.
I am using all the default settings. Is there some setting I should be changing?
As I mentioned earlier, I did try the Create Adobe PDF on-line service with this same file and it worked just fine, so there seems to be a difference between how the on-line service does the conversion and how PDF Maker does it. Printing the document to Adobe PDF also works, so again, there must be some difference in the way PDF Maker does it.
Any guidance you can give me would be greatly appreciated!
Thanks very much!

Similar Messages

Acrobat Pro XI: Creating a PDF from a Web Page

When I try to create a PDF from a Web page using Acrobat XI, I get the Error Code "Nothing done" and "Authorization Failure", but it doesn't happen on all webistes. Does anyone know what could be causing this and how to fix it? I'm using the trial version of Acrobat Pro XI on a Mac. Same result with either Firefox or Safari.
Thanks.

It's likely a HTTPS site or you have an authenticating proxy server where you are required to enter a password to acess the web page.

Acrobat crashes when creating a PDF from a web page

Whenever I ask Acrobat to create a PDF from a web page, it crashes halfway through the process. Here is an example from the BBC:-
http://www.bbc.co.uk/news/science-environment-19585341
Printing to PDF from the browser does not produce an accurate document. The font is too big, and most of the pictures do not appear.
I use Acrobat X Pro version 10.1.4.
This is a PC problem. On the Mac it works.

The problem I mentioned is peculiar to Acrobat 10 and also to my PC. On a Mac I can create PDF's from webpages normally.
I also notice that when printing to PDF from Opera only the first page comes out. (Using Firefox all pages are printed to PDF.)

Acrobat 8.0 Creating a pdf from a Webpage--Pages smallish

I created a pdf of 100+ pages from a webpage. When I print them, a pdf
page appears about 1/2 the size of the paper. According to Help, one
should go to Print and see some was to enlarge the printed material.
I see a picture of a page with 73% below it. There seems no way to
change the 73%

When you select to create PDF from Web Page, the window that requests the URL should have a conversion settings button. Select that button and adjust items accordingly. THere are options for the headers and such (includng the URL) as well as a layout with margins and such. This may not be enough variation to meet your need. In that case, try to print to a PDF from your browser and see if that is acceptable. In this latter case, the layout would defined by your browser, not Acrobat.

I made a fillable form using indesign and then acrobat professional but need to have radio buttons trigger different fields showing in the form below them - is that possible and if so how do I do it??

I made a fillable form using indesign and then acrobat professional but need to have radio buttons trigger different fields showing in the form below them - is that possible and if so how do I do it??

What version of Reader are they using, exactly? And are you sure they're
using Reader itself and not opening the file inside a browser window, for
example?
On Fri, Feb 6, 2015 at 5:24 PM, jessicao96457206 <[email protected]>

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error w

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?

Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra

ITS Error: "Use the most recent SAPGUI"

We currently have an SRM 4.0 system with support package 6 with a basis
component at 640 suport package 13. We are using the classic scenario
and are connected to an R/3 system what was recently upgraded to ECC
6. When we attempt to try to use the WBS, Cost Center or asset search
helps we get the following error: "Use the most recent SAPGUI
version". We can click past the error and eventually get the search
results.
This issue does not occur when we switch over to using the internal ITS
in SRM 4.0. Since SAP currently supports SRM 4.0 connected to ECC 6.0,
the fact that we are using the external ITS in SRM 4.0 should not be an
issue since it is still supported.
Does anyone know If there is a requirement for our SRM system to be on the internal ITS
while connecting to an ECC 6 system? Also, can anyone please let us know and/or provide any
published document that states this, I have not found anything that
states this requirement.
Regards,
-Paul

Hello there
I'm not quite sure what differences to HCM the SRM has but we had the same problem. Please check OSS Note 905135 and following. As far as I know the 6.20 external ITS was the last "external" version. Which means all scenarios connecting to a 2004s or higher system need to use other technologies or the internal ITS.
Lots of luck.
Harry

With the upgrade to Acrobat Pro 9.4.6 I can no longer create a pdf from a document.

I am using Window XP, Office 2007 Professional. When the upgrade occurred, I lost the functionallity of creating a pdf from Publisher. I go through the print, select Adobe PDF and then print. Sometimes it looks like it is creating a pdf and then on results. Othertimes it just blinks and returns to Publisher. Adobe wil not let me un-install the last update. Any suggestions?

Thank you for your response. I got an error message as follows:
%%[ ProductName: Distiller ]%%
%%[ Error: undefined; OffendingCommand: MSPUB_setclippath_7 ]%%
Stack:
[0.0 -1.0 1.0 0.0 -10200.0 6600.5]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Any ideas?

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

I have a problem creating a pdf from within Firefox using the print to function.

I have a problem creating a PDF from within Firefox. I get an error message stating that Adobe PDF creation cannot continue because Acrobat is not activated. Acrobat Pro then opens. If it try to create the PDF again, the same problem. I have FF ver 3.6.10 and Acrobat Pro 8 (from Acrobat CS3).

This is an Apple user forum, no-one from Apple is here.

It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.

I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.but the result was same. now what can i do??

BobbyLe wrote:
I could not follow the AT&T instruction because my network (Optus) doesn't have anything as username or password or dial-up phone number. The only parameter I needed to key into Mobilink (the software I am running on the S10 is the APN which is: connectme that's it no number, no PIN, no password, nothing else.
How do I tell Windows to do that?
*99***1# <--- the number to call
at+cgdcont=1,"ip","connectme" <----- the string to put in the advanced field of the modem

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

Created a pdf from a word-file and inserted formfields. The fields works in other pdf-readers(nitro,reader etc), but not in adobe reader and acrobat. Please help.

Hi,
I have created a pdf from a word-file and inserted formfields for a work related file. I've used nitro pro to create the formfield. They works in nitro, reader, foxit etc. but not adobe reader. From page 3 and out, the font wont show when writing in a formfield. Some formfield doesnt even show.
Please help me fix this (hopefully before the presentation at work friday) :-)
File in question: Dropbox - Byggeplassperm_bico_prosjektledelse_2.pdf
Kind regards
Tobias

Agreed. Adobe makes no claims that their Reader will work properly with forms made from third party software.

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

Error using the distiller in Acrobat Professional 8 to create a PDF from an Aspose.Words .doc docume

Similar Messages

Maybe you are looking for