Error using variables in BEx

Hi experts
We use NW 04s BI SP09 and NW 04s EP SP09. We have made two queries that work fine. We have tested them in RSRT and the variables (both have customer exits and manual input) are filled. They work fine if we run them in our portal one by one. If we put one of the queries in a web template it still works fine. The problem occurs when we put two or more queries (with customer exits in both queries) into one template and use the variable screen. If we dont use the variable screen (VARIABLE_SCREEN = OFF) the error dont occur. I pasted a typical error message we get below (using variable screen). The error message is displayed after the variable screen has been filled out (0P_KAYD2) and checked.
Specify a value for variable 0P_KEYD2
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPSRRK0 and form APPEND_KHANDLE_1-02- (see long text)
Log ID: 0003BA0F39140062000007F200004B9A0004233B75B61056
Initial cause
Message:
Termination message sent ERROR BRAIN (629): Specify a value for variable 0P_KEYD2 MSGV1: 0P_KEYD2ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION
Does anyone have the same problem?
Kind regards
Erik

Yes, we are getting the same issue. Check out thread Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION
On my current project, the SAP team member said the fix would also be coming in Support Pack 11 at the end of Dec 2006.

Similar Messages

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Swf-version can be specified when using SDK 3.6? [ Error #1065: Variable JSON is not defined ]

I've been using playerglobal.swc of flash player 11 and SDK 3.6.
ReferenceError: Error #1065: Variable JSON is not defined
can be solved by setting -swf-version to 13. (http://forums.adobe.com/message/3933620#3933620)
However, swf-version is not available in SDK 3.6.
Can native JSON be used?
Otherwise, can com.adobe.serialization.json.JSON be used without name conflict?
JSON (from ...\flex_sdk_3.6\frameworks\libs\player\11\playerglobal.swc(JSON))
com.adobe.serialization.json:JSON (from ...\as3corelib.swc(com/adobe/serialization/json/JSON))

anyone know the answer to this?
how are we supposed to use the new player features with using the 3.x SDK?

FTPs connection error:When using Variable substitution for Directory path

Hi
I am transferring data from BI to xml file via PI: Here a Client proxy from BI sends the data to PI and the PI FTPs the XML file to a remote location. For FTP I am using FTPs SSL connection.
It was working fine untill I used Variable susbstitution to determine Directory path dynamically. I am using this because different xml files are intended to goto the different locations.
I did the variable substitution like this:
Target Message Structure:
---> Target Directory: %var1%
<?xml version="1.0" encoding="UTF-8" ?>
<MT_BI_EXTRACT_FILE>
<Header>
<Directory>/Customer</Directory>
</Header>
<Detail>
</Detail>
</MT_BI_EXTRACT_FILE>
And in the variable substitution I am doing it this way
payload:MT_BI_EXTRACT_FILE,1,Header,1,Directory,1
And the error I am getting is:
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure.
Does anybody have some Idea of this ??
Regards
Naina

Hi,
I guess the problem is not with Variable Substitution..
Error when getting an FTP connection from connection pool:
So its a connection problem..
Also check the option Disable Security check and try again...
Try to check again if the interface is executing properly without Variable substitution and let us know..
Babu
Edited by: hlbabu123 on Jan 7, 2011 2:46 PM

BPS ERROR I CREATE A NEW Manual Planning when a use variable in lead column

Dear
when a create a new manual planning have a message.
Frist
I create two variable one is Controlling Area other is Cost Element
in planning area.
next
I a create a manual planning to make a report form.i create a
manual planning layout category is key Figures and make Controlling
Area and Cost Element as lead column in next continue setup lead
columns tab.i set key figure and set Controlling Area and Cost Element
to use variable above.and finish other tab.
next
i double click manual planning system give me a message
The environment has changed; the layout can no longer be executed
notes: i can insure Controlling Area and Cost Element is a single value
and make sure both can mapping in cube
by the way when i use fixed value this form will be run.
Edited by: frank ju on Aug 6, 2009 11:13 AM

Hi Everybody:
I summarize the last post: In RoboHelp 7 for Word, the problem is that when I try to create a winhelp2000 project importing from a .hlp file of origin created previuosly, the import process makes error because it want to extract images that not exist on the .hlp file of origin. Thanks in advance for all the help that you can give me.
Ismael.

Error using BEx Analyzer - tools - 'copy sheet' function

Hello,
We are getting an error using BEx Analyzer, when we execute a query or workbook and select the 'copy sheet' function. The error is:
An error occurred when communicating with the BI Server
As a result of this the system has been disconnected from the BI server.
Exception Condition 'BAD_VALUE_COMBINATION' raised.
We are using BEx Analyzer 7.10.
Thanks very much.
Gayle

Hi
Implement this note first
Note 1086904 - BW 7.0 BEx: Transactions RRMX/RRMXP
in case if nottting works
Run the Same query in RSRT transaction code , see if you get the same error.
if you get the same error.
Go to RSRT give the query name and Generate the query (using generate button in RSRT)
hope this helps
santosh
Edited by: Santhosh Nagaraj on Oct 31, 2009 5:44 AM

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error in Variable Substitution

Dear All,
Result Payload:
<ns1:MT_Level1 xmlns:ns1="http://test.com">
<Header>
<Separator>,</Separator>
</Header>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<FileNode>
<FileName>test.txt</FileName>
</FileNode>
</ns1:MT_Level1>
I want to use "File Name" in the "File Node" node for my variable substitution.
In the configuration:
File Name Scheme = %filename%
Variable = filename
reference = payload: Messages, 1, Message, 1, MT_Level1, 1, FileNode, 1, FileName, 1
Note: I'm using multimapping (1 to N).
File Name path is /ns0:Messages/ns0:Message2/ns1:MT_Level1/FileNode/FileName ( from right click in the file name --> copy path).
I got following error:
"Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: filename"
Please advise!
Best Regards,
Victor.

Dear All,
My problem is solved!
The issue is because I don't put the interface mappings sequence as the same sequence as the message mappings sequence. Hence the structure name that i put in the variable substitution all are not match with the structure name in the payload even though all have the file name element.
So what i did is i have to reorder the sequence of my message mappings to be the same sequence as the interface mappings sequence.
Thanks for all that trying to help!
Appreciated it guys.
BTW, for the variable reference it's correct that i no need to put message and message2 as the reference.
payload:MT_Level1,1,FileNode,1,FileName,1 will do.
Best Regards,
Victor.

Error with variable substitution..

Hi
I am getting following error message for variable substitution
*Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_stamp: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_stamp
<?xml version="1.0" encoding="UTF-8" ?>
- <I813_EModMCS_IB_MT>
- <Records>
<ModMod>111</ModMod>
<DesModdcr>222</DesModdcr>
- <Date_Stamp>
<Date_Stamp>20080338</Date_Stamp>
</Date_Stamp>
</Records>
</I813_EModMCS_IB_MT>
date_stamp             payload:I813_EModMCS_IB_MT,1,Records,2,Date_Stamp,3,Date_Stamp,1
Would appriciate if you can correct the variable substitution...
Regards

To reference the element that is in bold in the example, the following expression is used: payload:root,1,e1,1,e2,2
The parser searches for the first occurrence of the root element at the first level. It then searches for the first occurrence of e1 at the second level and for the second occurrence of e2 at the third level. The content of the last element (u201CExample Valueu201D) is set as the value for a specified variable.
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
     <e1>
        <e2>Data_1</e2>
        <f/>
        <g attr="abc">text</g>
        <e2>Data_2</e2>
     </e1>
</dummy>
<e1>
     <e2>illegal/value</e2>
     <f/>
     <g attr="abc">text</g>
     <e2 attr="fghij">Example Value</e2>
</e1>
</root>
Edited by: Progirl Progirl on Jul 17, 2008 8:04 AM

How can i use Button in BEx 7.0

Dear Folks,
Could you help me please ..
In BI 7.0, for BEx analyzer i see we can use button, combo box, analysis grid.
If i have a requirement like this:
1. I have sales report, where it has information about sales person.
2. And i want to filter that report with the sales person that i choose from combo box.
For that requirement, i tried to :
1. I Create a query to Sales info-provider for displaying sales.
2. I Create a query to either to MD Sales person / Sales info-provider in order to get Sales persons data.
3. I assign point no 1 to Analysis Grid.
4. I assign point no 2 to Combo box.
My questions are:
a. Is my techniques correct ??
b. How can i use button to execute filter into the corresponding report ???
c. Is there any tutorial regarding this ?? Could you share it to me please ..
Really need your guidances..
regards,
Niel..

Hi Niel,
You can use the method you specified.
In Bex Analyzer you have design mode where you can have the following items Button, Analysis Grid and Combo box.
To work with the button you need to use the Command Wizard which consists of pre-defined functions, out of those select the one which suits your requirement and supply the parameters. As it is done thorugh a Wizard it would be easy to do.
Also,
The Button Name displays the name of the button, which is generated automatically and is unique. This name is used on the BEx Analyzer Design Toolbar menu to refer to a particular instance of the button.
· Range u2013 Manipulate coordinates for a cell or cells in this field to move or resize the button.
· Button Text - The text (caption) you want to display on the button. You can use this to describe the command the button executes.
· Command Range (optional) - Specify a three-column range of cells in the worksheet that contains command parameters. In these cells, you provide the same parameters (Name, Index, and Value) as in the Static Parameters, but in the worksheet these can be variable, changing during
navigation based on query results or on a value you manually specify.
Button in Bex analyzer
Regards,
Neelesh Jain.

Using variables to insert data in the table

I want to insert datas in the table. I use constants,
all the constants are stored properly in the table. But,
when I use variables I get the error message
"Too few parameters. expected 6".
(I declared all the fields of the table as text only.)
My program is "newt.jsp"
<%@ page language="java" import="java.sql.*" %>
<html>
<head>
<title>storing customer information in the database</title>
</head>
<body>
<%
String cno1 = request.getParameter("cno");
String n1 = request.getParameter("n");
String add11 = request.getParameter("add1");
String add21 = request.getParameter("add2");
String phone1 = request.getParameter("phone");
String email1 = request.getParameter("email");
Connection con = null;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:customer"," "," ");
Statement statement1 = con.createStatement();
Statement statement2 = con.createStatement();
statement2.executeUpdate("create table cust1 (cno varchar(20),n varchar(20),add1 varchar(20),add2 varchar(20),phone varchar(20),email varchar(20))");
statement1.executeUpdate("insert into cust1 (cno,n,add1,add2,phone,email) values(cno1,n1,add11,add21,phone1,email1)");
catch(SQLException sqle) {
System.err.println(sqle.getMessage());
catch(ClassNotFoundException cnfe) {
System.err.println(cnfe.getMessage());
catch(Exception e) {
System.err.println(e.getMessage());
finally {
     try {
     if(con!=null) {
          con.close();
catch(SQLException sqle) {
System.err.println(sqle.getMessage());
%>
<br><br>
Mr./Ms. <%=n1 %> <br>
Your datas have been stored.<br>
</body>
</html>
Those who know answer please reply.
My thanks in advance.

I would expect your insert statement to be this:
statement1.executeUpdate("insert into cust1 (cno,n,add1,add2,phone,email) values('"+cno1+"','"+n1+"','"+add11+"','"+add21+"','"+phone1+"','"+email1+"')");
If you just create a string, it's not going to fill in variables into the string by magic.

How to create a variable in BEx 7.0

Hi,
Can anyone please tell me how to create a variable in BEx 7.0
In 3.5, when we right click on a characteristic, we used to get an option for restrict.
I cant find any such option in 7.0

Hi,
Right click on the characteristic 0CALMONTH in the default values or drag it to char. restriction section and say restrict.Pull the drop down menu in that to select variables. There u will get a create icon.Click on that...then in details tab u can specify whether mandatory,interval and all..
Regards,
Rathy

Calendar prompt for Date variable from bex

Hi All,
I have a Bex query where I have a variable on 0CALDAY
- Customer exit (i_step = 1 to populate with current date)
- Single value
- Mandatory
I created universe on this query and in webI selection screen i do see the variable prompt.
I am not able to see the current date populated automatically since exit values are not populated to WebI at runtime.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly.
I am currently on BO XI 3.1 SP3.
Is there any specific setting in Universe or bex query which is required to get this Calendar prompt instead of list of values for dates?
Note: When we were on SP1 the universe created then had same variable from bex and it still shows us Calendar prompt but ever since we upgraded to SP3 for the query splitter functionality we not able to get the calendar prompt for date variable in new universe we create
Thanks
Ritesh

Yep.
Now tell me how you want to show that Prompt @ WebI report level.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly. Exactly, i didn't get this??
@Prompt:
You have flexibility to show options like:
Mono/Multi: User can select Single value or Multiple.
BW Variable: Same we have (Single/Multiple)
Free/Constrained: User can Enter his/her value directly or No change option.
BW Variable: By defalut you will get this, once you made it to Optional input.
Persistent/Not_Persistent: Refreshed report has to show last selected value means use Persistent otherwise Not_P.
By seeing the Prompt syntax , I can say your Variable is after Customer Exit, Correct??
Workaround for your Problem is:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A','Date\LovDate (Previous Day)Base',mono,primary_key)"/></CONDITION></FILTER>
You have to remove that Date class and objects from prompt syntax. Because of that it showing up LOV's not calendar.
Like:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A',',mono,primary_key)"/></CONDITION></FILTER>
Why, It should be blank??
Because Date needs no class\object to show up, by default you will get Calendar on the fly.
Hope you got my point.
Thank You!!

Using variables as filters in analyses launched by Guided Navigation links

I'm trying to build a navigation link that will launch an analysis and have the filters in that analysis respect the values of either Presentation Variables or Session Variables. I'm having success with an ordinary column. I'm not having success with a number that I need to type into a prompt.
Here's what I've done so far:
1. Created a dashboard prompt based on the Month column. When a Month is selected, that selection populates the Request (Session) variable called Selected_Mo
2. Created an analysis with:
- a filter on the Month column: = Selected_Mo
- the Month column
- a column showing the value of Selected_Mo
3. Placed both of those onto a dashboard page. When I select a value of Month, the month in the analyis changes, and the column showing the value of Selected_Mo changes. So far, all is good.
4. Placed an Action Link on the dashboard. That action link launches the same analysis that I can see on the dashboard.
5. Clicked the action link. The value of Month that I selected on the dashboard is shown in the analysis.
Now, I'm trying to do the exact same thing with a numeric entry field in a dashboard prompt, and I'm running into a stumbling block. I want to type a number into a field in a dashboard prompt, and populate a session variable called Change_Pctg. Selecting "Variable Prompt" in the dashboard prompt only lets me populate a Presentation Variable. But no matter. I've created a "dummy" field like we used to do in 10g, just creating a Column Prompt against a column formula of 1.
When I put the analysis onto the dashboard, it's correct. I can enter a number into the dashboard prompt field, click Apply, and that value is shown in the analysis on the screen. I'm filtering against that value as well, and the number of rows is right. So I know that I'm setting the value of that Change_Pctg session variable.
But when I click the action link, only Selected_Mo is respected by the target analysis. The Change_Pctg session variable is ignored.
Any thoughts?

I'd like to abort this post. I've been able to replicate the error using a much simpler method. Refer to the post entitled 'Passing Presentation Variables to Guided Navigation'.

RWI 00200 Error while scheduling the Bex Query based Webi report

Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please advise

Hi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma

Error using variables in BEx

Similar Messages

Maybe you are looking for