Error using XA driver with WLPI

WLS: weblogic 7.0 sp2
DB: Oracle 8.1.7
We are using wlpi for our workflow process needs. we have 2 connection pools.
one for the wlpi database, another one for the application database. Now, we want
to make both of them use the XA driver - . The following is the config xml entry
for wlpi pool
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="5" MaxCapacity="50" Name="wliPool"
Properties="oracleXATrace=true;user=wlpi;password=wlpi;url=jdbc:oracle:thin:@dbserver:1521:SB;dataSourceName=wliPool;SupportsLocalTransaction=true"
ShrinkPeriodMinutes="2" Targets="myserver" TestTableName="DUAL" URL="jdbc:oracle:thin:@dbserver:1521:SB"/>
<JMSJDBCStore ConnectionPool="wliPool" Name="JMSWLIStore" PrefixName="myserver___wlpi"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource" Name="TXDataSource"
PoolName="wliPool" Targets="myserver"/>
But, while server startup, we are facing the following error:
<Sep 9, 2003 8:49:41 PM IST> <Alert> <JMS> <040320> <JMSServer "WLIJMSServer",
an error occurred wh
ile trying to do a SQL UPDATE on table "myserver___wlpiJMSState". Check privileges
on this table. Y
ou may need to specify [schema.[catalog.]] in your configured prefix.>
<Sep 9, 2003 8:49:41 PM IST> <Alert> <JMS> <040052> <JMSServer "WLIJMSServer",
store failed to open
, java.io.IOException: JMS JDBC store, connection pool = <wliPool>, prefix = <myserver___wlpi>:
cha
nge state
java.io.IOException: JMS JDBC store, connection pool = <wliPool>, prefix = <myserver___wlpi>:
SQL e
xception
java.lang.NullPointerException
at weblogic.jdbc.jta.XAConnection.prepareStatement(XAConnection.java:444)
at weblogic.jdbc.common.internal.ConnectionEnv.getStatementHolderForCachedPrepared(Connecti
onEnv.java:278)
at weblogic.jdbc.pool.Connection.prepareStatement(Connection.java:375)
Could anyone please tell what configuration is missed out? we have given SELECT
grant to wlpi user on DBA_PENDING_TRANSACTIONS table.
TIA
~rc

Hi hurd!
I believe you can not use XA connection pool for creating JMSJDBCStore. You have to use Non-XA Connection pool.
Thanks,
Mitesh
hurd wrote:
WLS: weblogic 7.0 sp2
DB: Oracle 8.1.7
We are using wlpi for our workflow process needs. we have 2 connection pools.
one for the wlpi database, another one for the application database. Now, we want
to make both of them use the XA driver - . The following is the config xml entry
for wlpi pool
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="5" MaxCapacity="50" Name="wliPool"
Properties="oracleXATrace=true;user=wlpi;password=wlpi;url=jdbc:oracle:thin:@dbserver:1521:SB;dataSourceName=wliPool;SupportsLocalTransaction=true"
ShrinkPeriodMinutes="2" Targets="myserver" TestTableName="DUAL" URL="jdbc:oracle:thin:@dbserver:1521:SB"/>
<JMSJDBCStore ConnectionPool="wliPool" Name="JMSWLIStore" PrefixName="myserver___wlpi"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource" Name="TXDataSource"
PoolName="wliPool" Targets="myserver"/>
But, while server startup, we are facing the following error:
<Sep 9, 2003 8:49:41 PM IST> <Alert> <JMS> <040320> <JMSServer "WLIJMSServer",
an error occurred wh
ile trying to do a SQL UPDATE on table "myserver___wlpiJMSState". Check privileges
on this table. Y
ou may need to specify [schema.[catalog.]] in your configured prefix.>
<Sep 9, 2003 8:49:41 PM IST> <Alert> <JMS> <040052> <JMSServer "WLIJMSServer",
store failed to open
, java.io.IOException: JMS JDBC store, connection pool = <wliPool>, prefix = <myserver___wlpi>:
cha
nge state
java.io.IOException: JMS JDBC store, connection pool = <wliPool>, prefix = <myserver___wlpi>:
SQL e
xception
java.lang.NullPointerException
at weblogic.jdbc.jta.XAConnection.prepareStatement(XAConnection.java:444)
at weblogic.jdbc.common.internal.ConnectionEnv.getStatementHolderForCachedPrepared(Connecti
onEnv.java:278)
at weblogic.jdbc.pool.Connection.prepareStatement(Connection.java:375)
Could anyone please tell what configuration is missed out? we have given SELECT
grant to wlpi user on DBA_PENDING_TRANSACTIONS table.
TIA
~rc

Similar Messages

Using network drive with time machine. IS IT POSSIBLE?

There are lots of discussion on using network drives with time machine. I have not been able to make them work. Could somebody tell me if this is possible

Time Machine does not back up to network drives, except Time Capsules or USB drives connected to an Airport Extreme, or a drive on a Mac running Leopard.
Here's the official word: http://support.apple.com/kb/HT1733
You may find some "hacks" that might make it work, in some cases, to a degree. But use them at your own risk.
First, since this is *unsupported by Apple,* there's nowhere to go when there's trouble.
Second, you're risking a future update preventing it from working, and perhaps rendering your backups useless.
If you still think this is a good idea, do yourself a favor before you bet your backups on it: be sure it really works, at least for now:
1. Get a copy of CarbonCopyCloner or SuperDuper! or the like, and make a full bootable clone of your internal HD, on an external disk. Test it by booting from it. Then reboot from your internal HD.
2. Let TM do it's first, full, initial backup.
3. Attempt a full system restore (like you'll need when, not if, your internal HD fails), via the instructions in item 14 of the of the Frequently Asked Questions post at the top of this forum.
Again, even if it works today, tomorrow is another day . . .

Can we use external drive with ipad air

can we use external drive with ipad air?

There are some wifi-enabled drives that allow you to stream content (music, films, tv programmes) to an iPad, but you can't directly connect one to an iPad.

[pavilion g7-2116sr] How can I use amd driver with only integrated graphic?

Radeon hd 7670m is disabled coz it's broken. Amd driver don't work. Windows use vgasave driver. How can i use amd driver with radeon hd7660g?
P.S. Sorry, my english isn't good(

Hi @Leys
I see you are stilll unsuccessful installing the drivers as you get the blue screen.
Here is a link to Computer Does not Start (Windows 7, Vista, XP) that may help.
Here is a link to Testing for Hardware Failures (Windows 7, Vista) to determine if your graphic card is defective.
If the graphic card fails, here is a link to the HP Pavilion g7 Notebook PC Maintenance and Service Guide. Please note page 9 or chapter 1 page 9 for a list of recommended replacement graphic cards.
If the graphic card passes you may wish to consider doing a restore back to a known good time or a full recovery back to factory.
Using Microsoft System Restore (Windows 7)
Performing an HP system recovery (Windows 7)
During the recovery process there is an option to backup your personal files to prevent data loss. If you have not done one yet I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
At any time you may wish to contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MOVED: Using 4xsata drives with MSI K8N NEO2

This topic has been moved to AMD64 nVidia Based board.
Using 4xsata drives with MSI K8N NEO2

Hi , yes unfortunately it's true !
Sata ports 3/4 is the fully nforce3 native chipset integrated (uses nvidia integrated PHY).
Use only theese if overclocking .
Satallink clock will be retained at 100mhz always .
Sata ports 1/2 are bridged from the nvidia chipset to an external marvell PHY .
Theese ones can not be used with HTT ref clock beyond ~230mhz +/- a few mhz without producing data corruption .
Satalink ref clock of 100mhz will scale upwards with increased HTT .
This issue applies to all nforce3 250GB/Ultra based motherboards with more than 2 sata ports regardless which vendor/make/model.
It's the chosen hw design that is the issue and no bios ever will fix it .
If you must have 4 sata drives , do like me and install a pci SIL sata controller card for the drives used for storage .
Take Abit NF8 (nf3) as an example .It has only 2 sata ports .
Why ?
Only the true/fully chipset integrated sata ports is used .
Although the nforce3 chipset supports a sata link to an external PHY for port 3 and upwards some has chosen to not utilize it .
Nforce 4 chipset has corrected this hw design by adding more sataport by the link to external phy .
In nf4 four ports are fully/true chipset integrated , and does not suffer from this overclock barrier .

Error using Seagate Central with Mavericks as a Time Machine backup drive.

I am trying to use a Seagate Central as a backup drive with Mavericks. After a while, I started getting a sparsebundle in use error. Time Machine does not backup to the drive as it keeps asking me to eject the drive, but I can't see it connected. How do I get the drive to start backing up again?

Thanks for the reply, I had done all of the above but that did not help solve the issue.
I finally deleted the sparsebundle using this: http://hints.macworld.com/article.php?story=20120709152257934
After this, I reconnected the Seagate Central Drive to time machine and the wireless backup worked!
Shrinath

Can i use external drive with pc and mac??? files be recognised by both??

hi
i have two external hard drives, with stuff from my pc on them.
can i plug them into my macbook? and just copy files?
usb hard drives.
one i think is one or the other, mac or pc, not both at same time, unless i partition and format i think. maybe the other one too.
i have a 8gb file on my pc, im trying to get into my macbook.
how can i???
i have a 160gb ipod, its only 30gb full, and pc says not enough space on it.
why is this???? the file is only 8gb......and theres over 100gb free on my ipod.
anyone help?
cheers

If your iPod is formatted FAT32 there is a 4 GB file size limit. Obviously an 8 GB file exceeds the limit.
In order to use any drive on both a Mac and a PC with full read/write capability the drive must be formatted MS-DOS (FAT16 or FAT32.) A drive formatted NTFS is read-only on a Mac unless you use third-party software such as MacFuse with NTFS-3G or Paragon NTFS.

Using a driver with labview

I want to create a GUI using labview to control a data acquisition card using a driver that was not created in labview. Could someone point me in the direction of some documentation that would give me some info on doing this.
Thanks

If you're using a non NI data acquisition card and the manufacturer doesn't have a LabVIEW driver, then you'll probably be using either a DLL or ActiveX interface that they provide. For interfacing to third praty DLLs, start with "Using External code in LabVIEW" that is part of the LabVIEW Bookshelf. You will need details from the manufacturer on the function calls. There are some shipping examples on ActiveX. The Invoke Node and Property Node functions on the Communication>ActiveX palette are used to access methods and properties.
If you were to mention the make and model of the board you're using, you might find someone here with knowledge of it that would provide more details.

Using network drive with iPhoto and iMovie

I bought a QNAP TS 212 NAS Drive and have it successfully set up on my network. I can see the drive and access its content through finder on my iMac. It is even visible in iTunes and am able to play media stored in it. But am unable to view the attached NAS Drive in iPhoto or iMovie. How can I use this NAS drive for storage of pcitures and video using above softwares?

You would be able to store your original files on the NAS with your Library on the internal drive with Aperture.
Note that this means other devices accessing those files will see no edits, just the files as imported from camera.
also since you seem an expert on iPhoto, is there a way to change default storage set up. I want my pictures to be assorted and saved under "album names" rather than year, month and date.
No. If you use iPhoto then the files are never accessed via the Finder, but only through iPhoto. So, how they are stored on the HD is just back end management for iPhoto.
Is there a way to export all the pictures in various albums and have them arranged under separate folders with matching album names?
If you have the most recent iPhoto 11, then yes, it's an option in the export dialogue. If you don't then
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
I would caution you about both iPhoto and Aperture. Neither of these apps have any cross platform ability. Both use virtualisation for lossless processing. Simply, apps from other OSes will not make any sense of these apps. You would need to export everything from them to have edits available to other OSes.
Regards
TD

How can I use pen drive with iPad?

how one can use pen drive in iPad?

You can use some USB flashdrives with the iPad's camera connection kit, but a lot of them require more power than is supplied to the kit, and you can only photos and videos to the iPad's Photos app with it - you can't copy other content, nor copy content off the iPad with it. Depending upon what you want to use it for you might be better off with syncing, Dropbox, emailing content, copying via your wifi network etc (depending upon the item type and what the app that you want to copy to/from supports)

I am using Windows Vista running ver 9 of Internet Explorer. Can I use iCloud drive with my PC?

I am running Windows Vista Business on my PC. I have ver 9 of Internet Explorer. Can I use iCloud drive on my machine?

Has any one helped you?

Error when mapping drive with read only permissions - unc path works fine

Hello,
we have user shares that we map to drive H:. the shares are in the form \\server\user\<loginname>. The shares have full permission and the files and folders have full permission for the user. To be clear, the shared folder is \\server\user. <loginname>
are several folders, one for each user.
We use a vb script to check if a user stores too much data and if yes, we set the permissions for the user to read only and delete (with icacls).
Unfortunately, it this happens, we cannot map the drive anymore on Windows 7 (on Windows XP it works fine). The error is "Permission denied". Interestingly, the user can still open the share with the unc - path.
Is there anything I can do, so that the user still has his drive mapped? Most user are not tech savvy enough to open their share with the unc - path.
Thank You,
Peter

Hi Peter,
Sorry for the delay in reply.
Please disable User Account Control in windows 7 to see if you can see the map drive. In the meantime, I suggest to use GPP instead of logon script to map drive.
GP Preferences Will Reduce Logon Scripts : Mapping Drives
http://blogs.technet.com/b/grouppolicy/archive/2009/02/11/gp-preferences-will-reduce-logon-scripts-mapping-drives.aspx
Please refer to the similar thread below to see if it helps:
Windows 7 Drive mapping via Logon script issue
http://social.technet.microsoft.com/Forums/en-US/6cdfae47-1ca0-46e8-8456-6aac2ee616b2/windows-7-drive-mapping-via-logon-script-issue
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem using JDBC driver with JSP

Hi, I am trying to connecto to my mysql server via a JSP page, but it seems that there is a problem with the driver call or something in my configuration that unables me to connect. I have the mysql-connector-java-3.0.7-stable driver.
This is how my classpath looks like:
CLASSPATH=/home/hooper/Sources/mysql-connector-java-4.0.7-stable/lib:/home/hooper/Sources/mysql-connector-java-3.0.7-stable/com:/home/hooper/Sources/mysql-connector-java-3.0.7-stable/mysql-connector-java-3.0.7-stable-bin.jar:/usr/java/j2sdk1.4.1_02:.:/usr/java/j2sdk1.4.1_02/lib/tools.jar:/usr/java/j2sdk1.4.1_02
And this is my JSP page code:
<%@ page language="java" import= "java.sql.*"%>
<%
Connection con = null;
     String userName = "hooper";
     String password = ""; //No password
     String url = "jdbc:mysql://localhost/test";
     //Load the Driver class file
     Class.forName("com.mysql.jdbc.Driver");
     //Make a connection to the MySQL database
     con = DriverManager.getConnection (url, userName, password);
     out.println ("Database connection established");
          if (con != null){
               //Close the connection
               con.close();
%>
And this is the error I get from Tomcat4.1.18:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: com.mysql.jdbc.Driver
root cause
javax.servlet.ServletException: com.mysql.jdbc.Driver
I hope someone can help me with this.
Thanks,
Luis

Hi..
Try using this way
String userName = "hooper";
String password = ""; //No password
String url = "jdbc:mysql://localhost:3306/test";
Class.forName("org.gjt.mm.mysql.Driver");
try to download the driver for mysql and add it to your classpath
Hope this works
Regd
Vasi

Signal 11 using thin driver with J2ME

I'm trying to use JDBC in a client application on a linux appliance using J2ME (CDC, Foundation Profile with optional JDBC package), but when it tries to load the Oracle driver (oracle.jdbc.pool.OracleDataSource) there is a memory fault. I know it's not a memory allocation or memory size problem, because on my desktop it only allocates 300 K, and I have more than 10 Mb free RAM in the appliance, and I changed all possible memory parameters in the JVM initialization.
At the end of the day, all I need is to connect to an Oracle 8.1.7 database from embedded Linux. Is it possible to use oracle.lite.poljdbc.POLJDBCDriver , the driver for Oracle Lite, instead of the driver in classes12.zip? Will the client work correctly?
If you have some contact with Oracle and interest in J2ME, I would like to encourage you to visit
http://jcp.org/aboutJava/communityprocess/final/jsr169/
and ask your Oracle representative about its support for J2ME and JDBC.
Regards,
Gustavo Frederico
gustavo.frederico at allstream dot com

Wish to know whether there is a common way to connect to Oracle 11g server using SID or service name.
Earlier I used jdbc:oracle:thin:@<<server>:<<port>>:<<SID>> for connecting to individual Oracle server instances.
Now I need to connect to Oracle RAC which provides service names. So I need to use jdbc:oracle:thin:@<<server>:<<port>>/<<service name>>.
This connection string is internally constructed by a program and user inputs <<server>>, <<port>> and <<SID>> or <<Service Name>>. Now this requires two different connection strings based on the input whether its SID or service name.
Is there a common connection string for these two? Based on some articles like this, I understood that we can generically use jdbc:oracle:thin:@<<server>:<<port>>/<<service>>, whether for SID and service.
When I tried this format with SID, I am getting the below error. What I tried is jdbc:oracle:thin:@myoracleserver:1521/ORCL, where ORCL is the SID
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Request your help in solving this. What I want is a single connection string whether its SID or service. Any help is of great value.
Oracle has an entire book for JDBC: The JDBC Developer Guide.
There are chapters that provide ALL of the connection properties and the rules for creating connection urls.
http://docs.oracle.com/cd/E11882_01/java.112/e16548/urls.htm#BEIDBFDF
See table 8-3 in that doc

Error using BI EE with Essbase

Hi all,
I'm using BI EE 10.1.3.3.2 with Essbase 9.3.1.1.
No problem importing metedata with Administrator; I can also use administrator in online mode.
When I try to use answer to view data I have the following error:
===============================
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError:
10058] A general error has occurred. [nQSError: 12002] Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000) SQL Issued: SELECT FedMog.Cost saw_0 FROM "127.0.0.1"
===============================
If I use a releational database I don't have any problem.
Do you have any suggestion?
Thank you in advance
Edoardo

Edoardo,
After you import the outline Metadata into the Physical layer of the BI Administrator are you able to right click on the Essbase souce and view the members?
Paige

Error using XA driver with WLPI

Similar Messages

Maybe you are looking for