Error when initializing input variable
While trying to create a copy rule for the " assign " activity i get the
"exception: could not retrieve message parts"
has anybody seen this eorro before. Please help.
Thanks
Check out your MessageType 'n XSD(if its there).of that variable.
May be something is worng with messageType or schema.
/mishit
Similar Messages
-
Error when defining a variable other than CHAR
I am getting a syntax error when I define variables :
data: l_arbei type p.
constants: l_delim type x value '09'.
Message L_ARBEI must be a character-type field (data type C, N, D or T). an open control structure introduced by "INTERFACE"
Has anyone else experienced this problem. Why can I not define these variables.data: l_arbei type p decimals 1,
l_ismnw type p decimals 1.
write w_ops-work_activity to l_arbei.
l_arbei = l_arbei - l_ismnw.
if l_arbei gt 0.
write l_arbei to w_ops-work_activity.
endif.
As mentioned same error message when defining the following:
constants: c_delim type x value '09'.
split i_input1-line at c_delim into
w_hdr-orderid
w_hdr-order_type.
I agree that there should be no problem with the definitions. However cannot understand why it does not like it. Thought there might be an additional requirement for Unicode systems. -
SAP Error when initializing work area SYST
Hi,
We performed a system copy, can start sap, can start the oracle database, and we upgraded the new kernel. However, we still get the error
"SAP Error when initializing work area SYST"
when attempting to log-in to SAP thru the GUI. We looked at many logs in the process.
Please hlep so we can resume post system copy steps.
the sap system is a BW copy
A few error lines from certain logs:
more dev_disp
Thu Oct 30 23:35:34 2008
ERROR => DpHdlDeadWp: W14 (pid 3018) died [dpxxdisp.c 14531]
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6970]
Thu Oct 30 23:35:36 2008
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2982)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
more dev_w14
A ** RABAX: end no http/smtp
more dev_icm
[Thr 08] Thu Oct 30 23:54:33 2008
[Thr 08] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (
rc=500)- please check node in TA sicf [icxxman_mt.c 2215]
more dev_icfo
<ErrorInfo URL="http://:/sap/public/icman">
<ErrorMessage>Error when initializing the work area SYST.</ErrorMessage>
<Date>20081029</Date>
<Time>154639</Time>
<Client>000</Client>
<User>SAPSYS</User>
<TerminationType>RABAX_STATE</TerminationType>
<ABAP-CallStack>
</ABAP-CallStack>
</ErrorInfo>
Edited by: Jay Elliott on Oct 31, 2008 2:21 PM>ERROR => DpHdlDeadWp: W14 (pid 3018) died http://dpxxdisp.c 14531
the Work process are getting terminated.
can you please paste full log from dev_w0 and dev_disp and std*
>we upgraded the new kernel
why don't you use the same kernel as same as source system?
cheers,
-Sunil -
Error when initializing work area SYST
Dear All,
I am upgrading from SAP 4.7 to ECC 6.0 (Oracle)
I have upgraded database from Ora 9i to 10g and client from 81x to 10.2.0.2 and kernel to 700.
Now after startsap .....its hows satrted successfully but on click of logon pad it gives error-
Error when initializing work area SYST
Pls help ....wat shd i do now ?
Regards,
Ankita.Hello Markus,
I have upgraded to kernel 700 patch level 102 for sun Solaris Sparc system.
The trace file is as below:
****************************dev_wo Tarce file************8
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid DEV
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 102
M intno 20050900
M make: single threaded, ASCII, 64 bit, optimized
M pid 2953
M
M
M Thu Aug 23 15:53:05 2007
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 2953) [thxxhead.c 1267]
M ThInit: running on host bssldev1
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPRD's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 10560cd20 1056147c0 105618168
C Attaching to DB Server DEV (con_hdl=0,svchp=105618098,srvhp=10561a3c8)
C
C Thu Aug 23 15:53:06 2007
C Starting user session (con_hdl=0,svchp=105618098,srvhp=10561a3c8,usrhp=105614fd8)
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C OCI-call failed with -1=OCI_ERROR
C SQL error 942: 'ORA-00942: table or view does not exist'
C *** ERROR => ORA-942 when accessing table SAPUSER
[dbsloci.c 11354]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105618098,usrhp=105614fd8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPPRD/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 10560cd20 1056147c0 105618168
C Starting user session (con_hdl=0,svchp=105618098,srvhp=10561a3c8,usrhp=105614fd8)
C Now 'SAPPRD/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C DB instance DEV is running on bssldev1 with ORACLE version 10.2.0.2.0 since AUG 23, 2007, 15:52:47
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070823 155305 bssldev1
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: ffffffff78656000, size: 4400000)
M SHM_ROLL_AREA (addr: fffffffe5a000000, size: 134217728)
M SHM_PAGING_AREA (addr: fffffffe54000000, size: 67108864)
M SHM_ROLL_ADM (addr: ffffffff78a8c000, size: 2672386)
M SHM_PAGING_ADM (addr: ffffffff73b00000, size: 656416)
M ThCreateNoBuffer allocated 352144 bytes for 1000 entries at fffffffe4e004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at ffffffff73a00000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)ES initialized.
B
B Thu Aug 23 15:53:07 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8, CON_ID = -1
B
B Thu Aug 23 15:53:10 2007
B dbtbxbuf: Buffer TABL (addr: fffffffe4c000100, size: 30000000, end: fffffffe4dc9c480)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14431488
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Buffer TABLP (addr: ffffffff70400100, size: 10240000, end: ffffffff70dc4100)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5057728
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 3 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 4001 * 64 = 256064
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28005 * 128 = 3584640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: fffffffe6f800108, size: 4194304, end: fffffffe6fc00108)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 4001 * 64 = 256064
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28005 * 128 = 3584640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: fffffffe68400108, size: 4194304, end: fffffffe68800108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 3001 * 64 = 192064
B 4: 1500 * 160 = 240000
B 5: 3001 * 8 = 24008
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 10208 * 256 = 2613248
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: fffffffe50dec108, size: 3072000, end: fffffffe510da108)
B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 4001 * 64 = 256064
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28004 * 128 = 3584512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: fffffffe63800108, size: 4194304, end: fffffffe63c00108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#4 @ 2228] [dbcalbuf2228 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding =SBCS / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Aug 23 15:53:11 2007
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauInit): Shared memory for Security Audit Log already exists.
M SecAudit(RsauInit): Re-initialize with new profile parameters
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = ffffffff75f00000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = ffffffff75f00450
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = ffffffff75f00488
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = ffffffff75f00494
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/DEV/DVEBMGS00/sec, AS=bssldev1, instanceid=00)
N SsfPseLoad: Downloading file /usr/sap/DEV/DVEBMGS00/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1077)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M
M Thu Aug 23 15:53:14 2007
M CCMS: AlMsUpload successful for /usr/sap/DEV/DVEBMGS00/log/ALMTTREE (1387 MTEs).
S
S Thu Aug 23 15:53:15 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 10594d3e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at fffffffe510de060
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at fffffffe510de368
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1192 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5152kb, dir_size: 5112kb.
A Attached to PXA (address fffffffe42000000, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=fffffffe7054a000 leng=20938752 end=fffffffe71942000)
A >> Shm MMADM area (addr=fffffffe70772058 leng=144768 end=fffffffe707955d8)
A >> Shm MMDAT area (addr=fffffffe70796000 leng=18530304 end=fffffffe71942000)
A RFC Destination> destination bssldev1_DEV_00 host bssldev1 system DEV systnr 0 (bssldev1_DEV_00)
A RFC Options> H=bssldev1,S=00,d=1,
B table logging switched off for all clients
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 8352 bytes at ffffffff72b00000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/DEV/DVEBMGS00/sec): ok
N SsfSapSecin: PSE /usr/sap/DEV/DVEBMGS00/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/DEV/SYS/exe/run/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
M *** ERROR => SlicLikeyGetAllRecords: RS_OPEN failed rc=32 [sliclikey.c 988]
M *** ERROR => likey_init: likeyche_fill_buffer: couldn't get the list of all records from the persistence. [sliclikey.c 1269]
M *** ERROR => SlicLikeyInit: likey_init failed: 1 [sliclikey.c 261]
M *** ERROR => SAPlicense: LIKEY initialisation failed! [slicshm.c 268]
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 1
W ITS Plugin: Release: 700, [7000.0.102.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [13]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S server @>SSRV:bssldev1_DEV_00@< appears or changes (state 1)
M *** ERROR => R/3 release 620 is not supported with this kernel (700) [thxxsick.c 237]
A *** ERROR => R/3 release 620 is not supported with this kernel (700) [sapicc.c 1082]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:53:17 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:53:17 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error when initializing the work area SYST..
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:53:18 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:53:18 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A
A Thu Aug 23 15:53:34 2007
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:53:36 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:53:36 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when initializing the work area SYST..
A
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1364]
A
A Thu Aug 23 15:54:19 2007
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:54:20 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:54:20 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A
A Thu Aug 23 15:54:31 2007
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:54:33 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:54:33 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error when initializing the work area SYST..
A
Thanks,
Ankita, -
Hello Experts
I have a query which has input variable 0I_FPER for Fiscal year period and takes interval as input.
when i try to select values i get following error. i have tried different inputs
"Characteristic Fiscal year/period has no master data for "003.2010" "
I tried creating new input variables and still get same ptoblem for TO value put in.
Please help.
Thanks in advance
Regards
SudeepHi
I am using 0FISCPER infoobject for restriction, master data table for this is T009B.
i even tried to rebuild this using tranfer global setting s option but problem still exists.
0FISCPER object has no SID table.
Moreover this report work fine using RSRT but give error at inputs when i run it over web.
I am still facing same problem
Please help
Regards
Sudeep
Edited by: Sudeep Paranjape on Dec 27, 2010 10:50 AM -
Error when initiating a process
Hello,
when initiating a process, e.g. a Life & Work Process, i get an error at step 4 of the Process initiating road map. "Process could not be initiated: Set user context". The roles assignment should be ok. Any ideas what could be the problem?
cheers,
MarkusHi Markus,
You need to assign the default roles to the processes. Check this link for the details: http://help.sap.com/saphelp_erp2005/helpdata/en/43/9f2d87c0a86756e10000000a11466f/frameset.htm
Regards,
Shubham -
Error when defining a variable from a class
Hi,
I'm getting this error message when trying to define a
variable from a class:
'1086: Syntax error: expecting semicolon before left paren.'
I can't see where the error is.
The scripts Question.as and Codeframe.as is located int the
folder Mycomponents under the project.
Regards
/Acke
**** Main app *****
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.CloseEvent;
import myComponents.*;
var Question():myComponents.Question=new Question(); // !!
This line causes the error !!
other code goes here....
]]>
</mx:Script>
**** The class definition ******
package myComponents
//import other classes needed
import Mycomponents.Codeframe
public class Question {
// Define properties and methods.
// Define public vars.
public var Qtype:string;
public var Condition:string;
public var Qnumber:string;
public var Qheading:string;
public var Pretext:string;
public var Qtext:string;
public var Posttext:string;
public var Codeframe():string;
public var Reserved:string;
public var EditableFrom:string;
public var EditableTo:string;
public var Decimal:string;
public var SetQfactor:string;
public var Logic_if():string;
public var Logic_then():string;
// Public constructor.
//public function Question(){
// do stuff to set initial values for properties
public function Question(Type:string,
Condition:string,
Qnumber:string,
Qheading:string,
Pretext:string,
Qtext:string,
Posttext:string,
Codeframe():string,
Reserved:string,
EditableFrom:string,
EditableTo:string,
Decimal:string,
SetQfactor:string,
Logic_if():string,
Logic_then():string,
):Void
this.Type=Type;
this.Condition=Condition;
this.Qnumber=Qnumber;
this.Qheading=Qheading;
this.Pretext=Pretext;
this.Qtext=Qtext;
this.Posttext=Posttext;
this.Codeframe()=Codeframe();
this.Reserved=Reserved;
this.EditableFrom=EditableFrom;
this.EditableTo=EditableTo;
this.Decimal=Decimal;
this.SetQfactor=SetQfactor;
this.Logic_if()=Logic_if();
this.Logic_then()=Logic_then();
}1.
It should be
var theQuestion:Question = new
Question(sType,sCondition:string,sQnumber,sQheading,sPretext,sQtext,sPosttext,
sCodeframe,sReserved,sEditableFrom,sEditableTo,sDecimal,sSetQfactor,sLogic_if,sLogic_then )
As you don't have default values in the constructor - you
should specify the parameters.
2. why do use type "string" ? It should be "String" if you
refer to a standard type
3. What are you trying to say by this:
public var Codeframe():string;
public var Logic_if():string;
public var Logic_then():string;
There should not be any parenthesis in the variable
declaration.
4.
this is wrong
var Question():Question=new Question();
this even wronger
var Question():Array=new Question(); // I'm trying to create
an array here anyway...could this be the problem??
no parenthesis!
var Qs():Question=new Question();
hmmmm....
.var Qs()=new Question();
I think you should start reading from the following link to
get more understanding of the variables, types & declarations:
http://livedocs.adobe.com/flex/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDo cs_Parts&file=00001863.html
Cheers,
Dmitri. -
Error when initializing the Capex module
Hi all,
We are implementing Hyperion classic planning application11.1.2.1; have three plan types under single currency application. One of the plan type is Capex module,
When I initialize the capex module it throws me this particular error :
Myplanning sysout log shows this/:
UserObjAccessFilter: com.hyperion.hbr.beans.UserObjAccessFilter@227b8a8
UserObjAccessFilter: com.hyperion.hbr.beans.UserObjAccessFilter@227bad3
UserObjAccessFilter: com.hyperion.hbr.beans.UserObjAccessFilter@227bcfe
UserObjAccessFilter: com.hyperion.hbr.beans.UserObjAccessFilter@227bf29
UserObjAccessFilter: com.hyperion.hbr.beans.UserObjAccessFilter@227c154
=2012-03-09 16:14:56,375 WARN [ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBRules - Error while executing query: insert into HBRRulesVarLink (RuleID, VariableID, VarOrder, HideVar) values(?, ?, ?, ?)
- Error while executing query: insert into HBRRulesVarLink (RuleID, VariableID, VarOrder, HideVar) values(?, ?, ?, ?)
=2012-03-09 16:14:56,375 WARN [ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBAdminManager - Error while linking Variable AssetClass to Rule CalcExistDepr.
queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
- Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
=2012-03-09 16:14:56,637 WARN [ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
- Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
Error(s) while initializing Capital Expense module...
Please help...
RegardsWe just don't have enough enough Hyperion people to hang around....we need to form a social network just for Hyperion :)
-
Error when using the variable System::ErrorDescription
HI All,
When I try to use the variable System::ErrorDescription I get the following error:
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
Do I need to declare it or it's a variable that always is available to get exceptions from the execution states?if this is in a Script Task then:
- add the variable in the Script task property ReadOnlyVariables list
- in the Script Code refer to it as
string ErrorDesc = (string) Dts.Variables["System::ErrorDescription"].Value;
Jan D'Hondt - SQL server BI development -
ODI "Session Stopped" Error when refresh a variable
Hi ,
I have a error using ODI when I refresh a global variable and odi report this error information as "Seesion Stopped"!!!
Does anyone come across it? Do you have any suggestion to me?
Thank you in advance!
JackHave you got any constraints defined on your datastore at all ?
Static control is set to what on your interface? -
Errors when using query variables.
Recently in about half the queries I write with variables the variables will not work. For example:
SELECT O.DocNum
,O.CardCode
,O.CardName
,P.PrioDesc AS 'Priority'
,O.DocDueDate
,O.DocTotal
,O.U_Engineering_Appvd
,O.Confirmed AS 'Approved'
,O.U_Purchase_Reviewed
FROM ORDR AS O
JOIN OCRD AS BP ON O.CardCode = BP.CardCode
LEFT JOIN OBPP AS P ON BP.Priority = P.PrioCode
WHERE O.SlpCode = 18 AND
O.DocStatus = 'O'
Works perfectly, but when I make the change from "O.SlpCode = 18" to "O.SlpCode = [%0]" it complete fails with a red bar of death. The error I receive is: Incorrect syntax near '0' Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Like I said, this isn't for every query, just about half of them. Any help would be appreciated as this is rather important.
Thanks!!
MonicaHi.
Try this:
SELECT *
FROM ORDR T0
INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
LEFT JOIN OBPP T2 ON T1.Priority = T2.PrioCode
WHERE T0.[DocStatus] = 'O' AND T0.[SlpCode] LIKE [%0]
Or this one:
SELECT O.DocNum,
O.CardCode,
O.CardName,
P.PrioDesc AS 'Priority',
O.DocDueDate,
O.DocTotal,
O.U_Engineering_Appvd,
O.Confirmed AS 'Approved',
O.U_Purchase_Reviewed
FROM ORDR AS O
INNER JOIN OCRD AS BP ON O.CardCode = BP.CardCode
LEFT JOIN OBPP AS P ON BP.Priority = P.PrioCode
WHERE O.DocStatus = 'O' AND O.SlpCode LIKE [%0]
Also, check the name of User Fields are right.
Regards. -
Syntax error when creating input-ready query
Hi,
When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer.
When I execute the query, I get the following error:
Syntax Error in : CL_RSR_RRK0_KEYFIGURE
In se24, the class has a syntax error in its Constructor method.
The error is not occuring when I change the Planning property to 'Data Cannot be changed' or 'Data can be changed via Planning Functions'.
Has anyone encountered such an error. If yes, how to proceed further?
Anything do with the the ABAP Patches. Currently I am in Patch13.
Thanks,
BalajiHi,
Plz apply the notes 1042924 and 1043103.After appling the notes regenerate the
query.
This should solve the error.
Regards,
Srikanth. -
Error when initially calling Travel Trip Form Web Dynpro application
Hello all,
we are facing a problem when calling for the first time the Travel Trip Form Web Dynpro application.
In the trace file we get the following error message:
application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Wrong Web Dynpro URL: "../WebDynpro/Servlet/<deployableObject>/<application>/xx?..". xx is not allowed without exchange key. Retrieved URI path: /sap.com/esstratri/TripForm/~wd_key890_1246626831816/background.gif.
Exception id: [001E680CB1CE0078000002A600007B4A00046DCCEE3F358A]
This appears when a trip has been initially created and if the user wants to display a travel trip form.
However, this does not appear anymore, if you click on the travel trip form again.
Best Regards
PhilippHello Philipp,
We are having same problem. Please let me know solution....
Som -
Getting an "undefined" error when passing a variable to a function using Microsoft Razor
I am trying to call a function and pass a variable to it. However I get an "undefined" error.
The code is:
Layout = "~/_SiteLayout.cshtml";
Page.Title = "General Information";
var recID = 3;
<input type="text" id="rdy">
<p>
<a href=""><input type="button" name="button" id="button" value="Next Hypothetical" onclick='reselectState(recID)'></a>
</p>
<script>
function reselectState(recIDx)
var elem = document.getElementById("rdy");
elem.value = recIDx;
var rdy = $("#rdy").val();
alert(rdy);
location.href = '/hypothetical.cshtml?recordkey=' + rdy;
</script>
It seems to think that the variable "recID" is undefined even though it exists and I assign a value to it.Michael,
Let me ask you this ... Are you trying to pass the value of the Input value? If you are looking for the input value to be .. then I made some changes you can follow...
var recId = 3;
<input type="text" id="rdy">
<p>
<a href="">@*<input type="button" name="button" id="button" value="Next Hypothetical" onclick='reselectState(recId)'>*@</a>
<input type="button" name="button" id="button" value="Next Hypothetical" onclick='test()' />
</p>
<script>
function test() {
var inputValue = document.getElementById("rdy").value;
reselectState(inputValue);
function reselectState(recIDx) {
var elem = document.getElementById("rdy");
elem.value = recIDx;
var rdy = $("#rdy").val();
alert(rdy);
location.href = '/hypothetical.cshtml?recordkey=' + rdy;
</script>
--Thanks,
Pavan -
Error when initiating Application Server Jdeveloper
Gentlemen,
He forgives for the English, he is of Brazil and alone I say Portuguese.
I go to try to explain my problem, more I do not know the Jdeveloper very, I am beginning.
What this happening is following, when I set in motion the RUN in the page that I created in JSF, the Jdeveloper initiates the DefaulServer.
It shows in messages logs to me and to defaulserver logs the processes that are being executed.
After one 10 minutes, defaultserver it generates an error and it is finished.
below it follows what the Jdeveloper shows in log:
DefaultServer startup time: 114455 ms.
DefaultServer started.
[Running application Application on Server Instance DefaultServer...]
Uploading credentials.
---- Deployment started. ---- Jan 7, 2009 11:14:44 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-01-07 23:14:49.366: Writing WAR file to C:\DevSuite\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Application\Application-Project-webapp
2009-01-07 23:15:12.017: Wrote WAR file to C:\DevSuite\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Application\Application-Project-webapp
2009-01-07 23:18:03.711: Writing EAR file to C:\DevSuite\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Application
2009-01-07 23:18:05.115: Wrote EAR file to C:\DevSuite\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Application
Redeploying Application...
<07/01/2009 23h18min47s BRST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1231377521553' for task '0'. Error is: 'weblogic.application.ModuleException: Descriptor META-INF/XE-jdbc.xml not found.'
weblogic.application.ModuleException: Descriptor META-INF/XE-jdbc.xml not found.
at weblogic.jdbc.module.JDBCModule.init(JDBCModule.java:172)
at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:77)
at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:285)
at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:298)
at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:330)
Truncated. see log file for complete stacktrace
>
<07/01/2009 23h19min00s BRST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application'.>
<07/01/2009 23h19min00s BRST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Descriptor META-INF/XE-jdbc.xml not found.
at weblogic.jdbc.module.JDBCModule.init(JDBCModule.java:172)
at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:77)
at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:285)
at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:298)
at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:330)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Application on DefaultServer.: Descriptor META-INF/XE-jdbc.xml not found..
weblogic.application.ModuleException: Descriptor META-INF/XE-jdbc.xml not found.
#### Deployment incomplete. #### Jan 7, 2009 11:19:01 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
... 13 more
#### Cannot run application Application due to error deploying to DefaultServer.
[Application Application stopped and undeployed from Server Instance DefaultServer]
Please, somebody helps me!
thanks.Hi Frank
It stows analyzing log, and it found in a line of deploy that it looked to an archive xml:
Deployer:149034An exception occurred for task Deployer:149026deploy application Application on DefaultServer.: Descriptor META-INF/XE-jdbc.xml not found..
weblogic.application.ModuleException: Descriptor META-INF/XE-jdbc.xml not found.
#### Deployment incomplete. #### Jan 7, 2009 11:19:01 PM
#### Cannot run application Application due to error deploying to DefaultServer.
Application Application stopped and undeployed from Server Instance DefaultServer
I added one weblogic.application.xml in project and functioned, more still I find that the problem not yet erra this xml.
I find that the problem is mine schemes that this not aguentando to twirl the Jdeveloper,
it this very slow, and for some times application server does not initiate for having exceeded a time has limited Exactly thus,
Thanks a lot for the contribution.
Maybe you are looking for
-
Hey guys, for quite some time I've been working on dstatus for my own desktop. To share and improve dstatus I'd like to introduce it to the ArchLinux community now. dstatus is a small but expandable status application designed for use with dwm. While
-
"Oracle Data Integrator" with "Total Recall"
Hi all, We are planning to use Oracle Data Integrator 11g for performing ELT in Oracle 11g database. We are also planning to enable the "total recall" (flashback) technology and house all our tables on it. Question I have in my mind right now is, wil
-
Oracle 8i Enterprise Edition Release2(8.1.6) On Windows Millennium
Hi! Can Oracle 8i Enterprise Edition Release2(8.1.6) for Windows/NT/2000 be installed on Windows Millennium. If anyone has been able to successfully install it please help me. Thanks null
-
Current Time Indicator Question
There is a grey area following behind the current time indicator everywhere it goes, and animation presets will move along, how do I change this problem
-
Can't find Motion 5 in purchases after moving to new Mac Pro!
Just upgraded from MBP RD to the new MacPro. All souped up. I transfered all my MBP stuff from my time capsule Time Machine back ups directly into the new MC Pro. It worked out but to my surprise, many of the applications didn't make it. Ok. that's f