Error when opening Data Form

Hi All,
Also I have tried by removing access for that user and opened the Dta Form but still it throwing me the same error:
You are trying to open the data form, but cannot because all of the required dimensions are not present. Possible causes may be that you do not have access to at least one member of a required dimension, or the member selection resulted in no members present. Contact your administrator
Kindly guide me.
Thanks and Regards
ChiDam

duplicate post - Error while opening Data form
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Error When Opening Any Form

    Hi All.,
    Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
    Application:11.5.10.2
    OS-----------HP-UX
    DB-----------10.2.0.4.0
    File Name:
    oracle/forms/ui/FLWTextArea
    Work Around
    Relink the all the files
    Regenerated the jar files
    Regenerated the forms
    f60gen help=y
    Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
    Forms 6.0 (Form Compiler): Release - Production
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
    Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
    Oracle Multimedia Version 6.0.8.25.0 (Production)
    Oracle Tools Integration Version 6.0.8.17.0 (Production)
    Oracle Tools Common Area Version 6.0.5.32.0
    Oracle CORE Version 4.0.6.0.0 - Production
    Metalink Doc id
    java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

    Thanks,
    From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
    Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
    Here is an example:
    If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
    If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
    If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
    If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
    SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
    Enter value for bug_number: 9935935
    old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
    new 1: select bug_number from ad_bugs where bug_number='9935935'
    no rows selected
    SQL>

  • Error when opening the form

    Hi everyone,
    While opening a form in one of the Oracle Retail applications the error:
    FRM:41067-Cannot find Menu Item:Invalid ID
    is thrown. However when we click OK, the error goes off and system lets us to continue with using the form.
    On another form, the following 3 errors are thrown as soon as we open it:
    FRM:41091-Cannot find LOV:Invalid ID
    FRM:41828-LOV does not exist
    FRM:40738-Argument 1 to builtin SET_LOV_COLUMN_PROPERTY cannot be null.
    Again this error goes off once we click OK.
    This error is not happening on the base application and is happening only on the customer environment. I checked Oracle Retail specific tables but everything looks fine. Is there any environment specific parameters that could cause this error? Please advice.
    Regards,
    Preeti.

    Preeti,
    The only thing I can think of is that your customer does not have the correct version of the Form that is giving the error. Have your customer bring up the Forms Information screen (sorry, I don't recall the key stroke for this) and have them scroll to the Version section. Then compare this with your form that works. I am guessing that the versions are not the same.
    If they are the same, then you might be dealing with a setup issue. You might want to ask your question in the General EBS Discussion forum. I thought Oracle had a forum for their Retail product, but I couldn't find it. This forum would be the next best.
    Sorry I couldn't be more helpful.
    Craig...

  • FRM-18108 Error when opening a form with subclassed objects

    Dear Group,
    I have 2 forms in Oracle Forms 6i. One of the forms contains an object group. The other form contains the object that I subclassed it to.
    When I open the form that contains the subclassed object group, I get the FRM-18108 error.
    If I open the form with the original object group, then open the subclassed form, there is no error.
    Does this mean I must always open the original form in order to work on the one with the subclassed object group?
    I hope there is an simple solution to what is something I am missing in my Oracle Forms setup.
    Thank you in advance.
    Emad

    Hi Duncan.
    Your suggestion worked.
    Thank you for the fast response!
    Truly,
    Emad

  • Scripting error when opening Interactive Form

    Hi all,
    I'm experimenting with adobe interactive forms (in web dynpro), but things aren't going as expected. I'm getting scripting errors when clicking (in Internet Explorer) on a link that opens a view with an interactive form. Please see below for details.
    I've found a similar error description /thread/80059 [original link is broken], but the context is different. It seems to be related to namespaces, but I have no idea what I'm doing wrong.
    Any help is greatly appreciated!
    line 59: 'sapUrDomainRelaxing' is undefined
    line 109: Object expected
    line 113: Object expected
    line 137: 'SSR' is undefined
    line59
    ur_system = {<<SNIP>>, domainrelaxing: sapUrDomainRelaxing.MINIMAL, <<SNIP>>};
    line 109
    sapUrMapi_init();
    line 113
    sapUrMapi_Focus_RegisterCreate('');
    if( SSR && SSR.windowManager) SSR.windowManager.hideEventBlocker();
    sapUrMapi_initLinkStatus();
    line 137
    if (SSR.showInfo){ <<SNIP>> }

    Hello Jeroen and welcome to the SDN!
    It seems like an error in the WebDynpro-part, not in the Adobe forms-part. Please check if all your elements (views, windows, controllers, etc.) are in valid namespaces.
    Could you try to create an application for the WebDynpro-project in the NDS, and try to <i>deploy new archive and run </i>? Does this work?
    Perhaps you could even copy the project, and replace the Adobe Inter Form element by a static text, to test if it is in the WebDynpro part or that it really has something to do with the Adobe.
    Good luck,
    Jan-Willem Kaagman

  • Error when open UDO form generator

    when i try to open udo form gen .the following error arises.
    ERROR The Type initializer for 'B1 Wizard.Globals' threw an exception
    Pls tell me how to resolve it

    Have you searched the forum?
    You may check this first: ERROR: The type initializer for B1Wizard.Globalsu2019 threw an exception.
    Thanks,
    Gordon

  • Error while opening data form

    When I am trying to open forms I am getting the following error.
    "Planning is Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator"
    My case is a bit different from the other threads on the similar topic in the forum.
    I am able to login using ESSCMD.
    Can anyone suggest what should I do next?

    Thank you for your reply.
    I installed Essbase and Planning recently. I am using version System9.
    I created only one application.
    I checked Datasource connections, the Essbase username and password are correct.

  • FRM-41830 error when opening zoom form

    Hi All,
    I am facing a strange issue.
    We are using ZOOM functionality. Now I need to make some changes to the existing CUSTOM.pll file. The CUSTOM.pll is in our $CUSTOM_TOP/resource. The CUSTOM.plx file is placed in $AU_TOP/resource. I have taken backup of the CUSTOM.pll and plx file. I have made the changes and compiled in Middle tier from $AU_TOP/resource path.
    Once I open the application and click on ZOOM button, I am receving FRM-41830 error. Once I click ok, the ZOOM form is opened and could see the LOV details and the subsequent process is working fine.
    To test, I have replaced the backup CUSTOM.plx file and the issue is not reinstated.
    There is CUSTOM.pll file in $AU_TOP/resource, but it is a seeded copy and do not contain any of our custom logic.
    I am confident that the .pll file in $CUSTOM_TOP is the source.
    As another test, I have renamed the CUSTOM.pll in $AU_TOP/resource and tried compiling. I received the below error :*PDE-PLI018 Could not find library CUSTOM*. Once I undo the renaming, the compilation was successfull. Does it mean that Custom.pll in $AU_TOP/resource is being mapped?
    Command used is:
    f60gen Module=$CUSTOM_TOP/resource/CUSTOM.pll Userid=APPS/xxxx Output_File=$AU_TOP/resource/CUSTOM.plx Module_Type=LIBRARY compile_all=special
    Can anyone help me in resolving the issue.
    Thank You
    Sateesh
    Edited by: user11083692 on Aug 5, 2009 12:40 AM

    FRM-41830 error is "List of values contains no entries" - what changes have been made to CUSTOM.pll ?
    HTH
    Srini

  • WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection

    Hi all SDNers,
    Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
    This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
    consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
    I've followed below notes and perform the troubleshooting step by step by still to no avail:
    Note 1332428 - Missing data in service sessions from BI/CCDB
    Note 1257308 - FAQ: Using EarlyWatch Alert
    Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
    Note 1265070 - Diagnostics - Setup of Managed Systems
    Note 1010428 - End-to-End Diagnostics
    http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
    steps that have performed:
    restarted agent
    enlarge RFC resource cap for solmandiag and none
    delete entire SID in SMSY and pull again from SLD, re-setup managed system
    restart PI system
    i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
    in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when  opening an RFC connection and LASTRECORDS = 0
    I strongly believe this is the issue that causing no applicable data found for JAVA data.
    fyi, we are on SOLMAN EHP1 SPS27.
    Any kind advise is most welcome.
    Thanks,
    Nicholas Chang

    Gosh! at last i found the solution!!
    I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
    Problem faced:
    Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
    Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
    Possible Solution:
    1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
    2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
    3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
    4) Restart webadmin (step 3 & 4 can perform in VA too)
    5) set gw/keepalive &  gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
    5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
    > This is the main solution to solve intermittent failed RFC for extractor.
    Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
    Thanks!
    Nicholas Chang,

  • Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

    Hi 
    Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
    The second source has a huge list of company names that can be narrrow by email work. 
    background:SP 2010 and Infopath 2010
    CRISTINA&amp MICROSOFT Forum

    I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
    http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
    Regarding filtering dropdown list then this could be done by applying form on-load rules. 
    Hope this helps

  • Error when open Resouse Viewer form NEBC

    Hi experts,
    I facing a error when opening Resouse Viewer from NWBC.
    Could you kindy provide some ideas or suggestiongs, Thanks in advance.
    Best Regards,
    Matthew He

    Hello,
    the SAP Visual Business frontend component requires the FPM application to run in a browser mode 'standard'. You can press F12 in your browser to adjust this.
    Check note 1987004 to adjust the default mode for the application.
    In addition, it is important to check the SAP VB installation guide for the right NWBC and browser version.
    Hope this helps,
    Marcus

  • Error When Opening the Setup/Transactions/ Sources Window

    Hi All,
    in Oracle E-Business Suite R12 Version
    Error When Opening the Setup/Transactions/ Sources Window
    APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
    ORA-01403: no data found
    FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

    Amr,
    Please see the suggested solutions in these docs.
    App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
    R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
    R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
    APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
    Thanks,
    Hussein

  • Error when opening document with ECL control: INVALID_DATA

    Hi Gurus,
    I've tried to search the net for this problem but could not find anything and I'm stuck now.
    Description:
    we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
    when we try to open this document, time-to-time we get following error:
    Error when opening document with ECL control: INVALID_DATA
    Message no. SDV004
    by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
    what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
    It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
    Thanks,
    David

    Hi Christoph,
    thanks for tip, unfortunately this was already flagged, currently settings are:
    for Display Settings:
    yes - include ECL control
    use HTML control
    empty - maximum viewer wait time
    (do you think that setting some value for this could help)
    yes - deactivate generic object services in viewer
    no - doc display as dialog box
    yes - deactivate data provider cache
    Storage Settings:
    yes - always copy document class from document type
    yes - permit multiple assignment
    Thanks,
    David

  • Error when starting Adobe Form

    I have an Adobe Form which works Ok in the development SAP Portal, but that, when I log in the production portal gives the following error:
    Error when reinitializing the form (I guess, it's Error al reinicializar el formulario, in Spanish)
    I think maybe there is something missing to transport, or some misconfiguration, but I haven't been able so far to find it...
    Can someone give me a hand?
    Thank you in advance,
    S.

    Hi,
    Can you tell me when does the error message comes? Does it comes when you are trying to open the Form or when you are trying to execute it.
    Please check if it is still working in the development box?
    Regards,
    Susanta

  • Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

    Hi,
    We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
    We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
    In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
    Below the  BW error log:
    Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
    Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
    Error log of Integrations Services
    [SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
    em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
    em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.
    I checked the topic and notes below, but without success
    CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
    Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
    Note 353597 - Registering RFC server programs
    Regards,
    Bruno

    Hi Bruno,
    We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
    Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
    Below is the entry I added.
    P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
    P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
    Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
    I hope that this works for you.
    Regards
    James 

Maybe you are looking for