Error When Placing FLVPlayback Object on scene other then scene 1 Please Help
When I place a FLVPlayback Object on scene 3 I get the following error
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at Untitled_fla::MainTimeline/__setProp_flv_promo1_Scene3_Layer1_0()
at Untitled_fla::MainTimeline/frame1()
Any suggestions would be greatly appreciated.
Thanks
you must have something trying to reference that component in frame 1.
click file/publish settings/flash and tick "permit debugging" to get more detailed information, including the line number, about the code causing the error.
Similar Messages
-
Error When Placing FLVPlayback Object on scene other then scene 1
When I place a FLVPlayback Object on scene 3 I get the following error
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at Untitled_fla::MainTimeline/__setProp_flv_promo1_Scene3_Layer1_0()
at Untitled_fla::MainTimeline/frame1()
Any suggestions would be greatly appreciated.
Thanksplease don't cross-post.
-
Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything Windows 8.1
I assume you know where your catalogue file (the lrcat file) is located. In the same folder is a previews lrdata folder which you should delete or rename in Explorer, then start LR again.
If I've made incorrect assumptions above, sorry, and we'll go back over it from the start.
John -
Post-processing pipeline causes error when placing "SceneGrid" object into 3D scene
Hi,
first want to thank you guys for the great work with proscenium and the awesome features.
I was going through the examples and found a bug. I tried a combination of the examples "TestLines" and "TestPPEncodeDecodeHDR".
The post processing pipeline somehow manipulates the render sates/vertex program in a way it crashes as soon as it should perform the drawTriangles call for a "SceneGrid" object.
It does not seem to be related to my particular post processing setup - I tried TestPPBloom and TestPPEncodeDecodeHDR from the examples. The post processing pipeline seems to work fine with a 3DS model (Teapot) .
//add grid
scene.addChild(new SceneGrid());
//setup post-processing
if(true) {
instance.createPostProcessingColorBuffer();
instance.colorBuffer.targetSettings.useHDRMapping = true;
instance.colorBuffer.targetSettings.kHDRMapping = 4;
var colorToPrimary:RenderGraphNode = new RenderGraphNodePPElement(instance.colorBuffer, null, RenderGraphNodePPElement.HDR_DECODE, "Decode HDR" );
colorToPrimary.addStaticPrerequisite(instance.colorBuffer.renderGraphNode);
instance.renderGraphRoot.clearAllPrerequisite( );
instance.renderGraphRoot.addStaticPrerequisite(colorToPrimary);
This gives me the following error:
Error: Error #3607: Stream 2 is set but not used by the current vertex program.
at flash.display3D::Context3D/drawTriangles()
at com.adobe.scenegraph::Instance3D/drawTriangles()[D:\Depots\Proscenium\branches\rel\code\P roscenium\src\com\adobe\scenegraph\Instance3D.as:537]
at com.adobe.scenegraph::PB3DCompute/compute()[D:\Depots\Proscenium\branches\rel\code\Prosce nium\src\com\adobe\scenegraph\PB3DCompute.as:332]
at com.adobe.scenegraph::RenderGraphNodePPElement/render()[D:\Depots\Proscenium\branches\rel \code\Proscenium\src\com\adobe\scenegraph\RenderGraphNodePPElement.as:272]
at com.adobe.scenegraph::Instance3D/render()[D:\Depots\Proscenium\branches\rel\code\Prosceni um\src\com\adobe\scenegraph\Instance3D.as:304]
at com.adobe.scenegraph::BasicScene/enterFrameEventHandler()[D:\Depots\Proscenium\branches\r el\code\Proscenium\src\com\adobe\scenegraph\BasicScene.as:273]
Thanks,
Philipp
Full Source Code:
package
import com.adobe.scenegraph.*;
import com.adobe.scenegraph.loaders.*;
import com.adobe.scenegraph.loaders.collada.*;
import com.adobe.scenegraph.loaders.obj.*;
import flash.display.*;
import flash.display3D.*;
import flash.events.*;
import flash.geom.*;
import flash.utils.*;
public class TestLinesWithPostProcessing extends BasicScene
override protected function initModels():void
//add grid
scene.addChild(new SceneGrid());
//add teapot
// var f:Function = function(event:Event):void { (event.target as ModelLoader).model.addTo(scene); }
// var loader:OBJLoader = new OBJLoader("res/content/teapot.obj");
// loader.addEventListener(Event.COMPLETE, f, false, 0, true);
//setup post-processing
if(true) {
instance.createPostProcessingColorBuffer();
instance.colorBuffer.targetSettings.useHDRMapping = true;
instance.colorBuffer.targetSettings.kHDRMapping = 4;
var colorToPrimary:RenderGraphNode = new RenderGraphNodePPElement(instance.colorBuffer, null, RenderGraphNodePPElement.HDR_DECODE, "Decode HDR" );
colorToPrimary.addStaticPrerequisite(instance.colorBuffer.renderGraphNode);
instance.renderGraphRoot.clearAllPrerequisite( );
instance.renderGraphRoot.addStaticPrerequisite(colorToPrimary);
override protected function resetCamera():void
scene.activeCamera.identity();
scene.activeCamera.lookat(new Vector3D(0, 5, -15), new Vector3D(0, 0, 0), new Vector3D(0, 1, 0));Hi John,
Pls check in SXI_CACHE to verify that the BPM(active in Integration Repository) has the latest version active on the ABAP stack.(I am saying this because you mentioned that a mapping step was missing..is it not..)
go to SXI_CACHE --> Integration Processes(double click), in the list that you get verify that the return code is 0.
Thanks & Regards,
Renjith. -
I get an error when trying to download iOS7 on iphone 4s...Please help?
I am trying to download iOS7 on my iPhone 4s, and keep getting "An error occurred downloading iOS 7.0". What do I do now?
I got the same message as you. I restored from backup and then updated to iOS7. Worked like a charm. Hope that helps.
-
Im getting errors when im trying to watch videos on firedrive and sockshare please help
this are the errors im getting
firedrive
sockshare
http://i.imgur.com/zZu1R4R.png?1Read Before Posting: How To Get A Useful Answer To Your Question
-
Cant log into iMessage on myI ipad air and get the message " please check your internet connection and try again" and my internet is on and I can connect to it in other applications.
1. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
2. Make sure phone number or email address is correct
3. Restart iPad
4. Reset iPad. Hold the Sleep and Home button down (together) until you see the Apple Logo -
HP PRO8500
KEEPS ASKING FOR MAGANTA INK, THEN LOOSE IMAGE, I ALREADY REPLACED INK TWICE BUT ISSUE STILL PERSIST.
PLEASE HELPOk, finally got it fixed !
Here's what was causing the issue, and what I did to fix it :
I had free content in my iTunes download queue that I got from the "iTunes 12 days of Christmas" promotion, but the problem was that some of the items (two HD episodes) were too large to fit in my harddrive (I'm running low on free hd space) - so each time I was running iTunes I had to cancel the downloading of those items. On my iPhone, I was able to cancel the downloading once for all, but iTunes somehow wanted to try downloading them even if I deleted them. This was quite frustrating so I sent a mail to the support using the Express Lane feature on the support website, asking for thos items to be removed from my iTunes account - and tadaaaa ! Once a nice guy from Apple deleted them, my iPhone stopped asking for that stupid password ! -
0FIA_DS11:Error when activating DataStore Object
Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMSHi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S -
Error when activating DataStore Object
Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des. -
Error when transporting ODS Object
Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again. -
I was trying to load an online game, and it said "Shockwave Player Error-to view movie, please switch to 32-bit mode." IT WOULDN'T WORK WHEN I TRIED IT! WHAT SHOULD I DO! PLEASE HELP SOON!
Update your Flash from Adobe's website. If that doesn't work, tell the webmaster they aren't using a portable version of Flash that is as compatible with as many browsers as possible.
Please don't use all uppercase. In internet etiquette it means you are shouting. -
hi everybody,i have a ipad 2 wifi 3G , and i want to share my internet from ipad to an other ipad or pc , when i check setting menu,i cannt see ,"personal hotspot" ,please help me ,for active this option on my ipad
how can i ,install this function on my ipad ?please help me
is there any way for solution my problem?i mean that how can i personal hotspot or an onther application for this purpose
i will have a internet sharing by ipad for my labtop -
Getting "a drawing error occurred" in Acrobat XI, able to open in Acrobat X, please help
Getting "a drawing error occurred" in Acrobat XI, able to open in Acrobat X, please help
I have had the same problem. Have you found an answer. I solved my problem by
opening the file in acorbat and reducing the size to be compatible with Acrobat 6 or later and it gave me a message that
a masking file was omitted and now i do not get the error when i download the file from the server. -
Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.
Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us; working on it!"
Message was edited by: MacLuc
Maybe you are looking for
-
Help with exporting file for print
Hello, I'm trying to print a banner through Spoonflower (a site that lets you print on fabric). They recommend an RGB, 150dpi file. (max 58" wide x 288" long, 40MB) and accept a wide variety of file types (ai, svg, eps, tif, png, jpeg). My banner is
-
hi i am using a LDB in my report whcih had 3 fields.i dont want the third field to be displayed on the selection screen.how can i do that,plz suggest.it does not have modifid to changes the status in the at selection screen output. regards
-
SD document number to be same as FI document number
Hi Is it possible to give the same SD document number as FI document number (Accounting document number). If possible please advise how can we configure that. At present due to error, some invoice were not posted to FI. In SD & FI the number is comin
-
Is there any way to go back to ios 7 from ios 8? I dont like it.
I Recently downloaded IOS 8 onto my Iphone 5s and im not teally fond of it. Is this a permanent change or can i go back to ios 7?
-
TT12080: No subscriber found to swap with
Hi, I have a strange issue on a replicated DB. We have a script to handle recovery duplicating datastores from a surviving one. The script does: Drop the Datastore Start the DB with ttbit istart Duplicate DS with: $X10_BIN/ttRepAdmin -dsn tt41data -d