Error when updating Mobile Connect Schedule for Remote Destination

On UCCM ver 8, I'm getting an error everytime I attempt to set the Ring Schedule for Mobile Connect when configuring a Remote Destination.
Error = Update failed. [10612] End user for TimeSchedule and TODAccess must match
This problem seemed to start after we were having an issue with the Remote Destination not working intermittently and we recreated the profile. If I leave the Ring Schedule set for "All the Time" and update, the error does not occur. It only happens when I specify a time. My time settings are Friday only, from 8:30 to 16:30; Time Zone = (GMT-5:00) America/New York.
I do not have any TimeSchedule/TODAccess setup for End Users (that I know of), so not sure where to check this setting if it exists. The phone type for this setup is the 9971 (sip). We have other users using Remote Destination on this same model phone without an issue.

The problem was that the todaccesssetting table was missing an entry for that user's time schedule so it was failing to update. The problem was resolved by simply deleting/recreating the Remote Destination and Remote Destination profile.

Similar Messages

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Channel.Connect.Failed (http 501) error when trying to connect to a remote php gateway

hey all
this is my first app to access remote data, and i am trying to build both clieant and server side
i am working on a flashbuilder 4.6 and php simple system.
I use the php data wizard to build my php code/services and develop locally on a wamp server, configuring the local mysql db with phpmyadmin. the wizard itself enables the zend framework needed
locally, all looks fine
i am trying out deployment to my real, linux based remote server, and for the first step I uploaded my php services to the remote server
i used this guide by Mihai Corlan and when testing my app i get an Alert with
Send failed
Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 501: url: 'http://(my domain + file structure to..)gateway.php'
so i guess even before i get to see if i changed the amf_config.ini and gateway.php itself and the services properly for deployment i am unable to connect to the gateway, correct?
http 501 is something about html headers? i dont know any html, any php, any sql just as3 and mxml
can anyone help?

I do get "Zend Amf Endpoint" - as well - the app works perfectly when testing on my desktop as iphone4 simulation and on android, just not on my 4s device.
as a side note, i can even browse to the gateway.php that I have set up via safari on the device. That makes me think that theres just some dumb http entitlement or "allow" setting for ios that I'm not finding.

Password error when trying to connect icloud for PC to Outlook 2007

Hello,
I have somme password problems when I try to connect to Outlook 2007 with ICloud 2.1.2 for PC on Windows 7
When trying to creating connection to Outlook, I have always the message: invalid password or AppliID.
I try to disconnect, then reconnect: nothing done.
I try to reboot: nothing done.
Note: I need to use the Administrator mode for starting Icloud.exe: otherwise impossible to open the Icloud utility

It's any network. If I reset network settings, I can connect at home, but I get the "wrong password" but not at work. Then, if I reset it again, I can conect at work, but not at home.
Only way to switch Wifi network is through a "reset network settings" operation.
On my wive's iPhone 5 this problem does not exist. She can commute seemlessly among WIFI networks.

'Connection Description for Remote Database not found' Error

Hi All,
I have an interface that loads Oracle DB from an Oracle source(JD Edwards). It is mostly one to one mapping of the columns, and is utilizing LKM Oracle to Oracle(DBLink), IKM Oracle Incremental Update and CKM Oracle.
I am getting an error when executing the interface which states 'Connection Description for Remote Database Not Found' at the 'Insert Flow into I$ table' step in the Operator logs.
The below is the content of the error:
2019 : 42000 : java.sql.SQLException: ORA-02019: connection description for remote database not found
java.sql.SQLException: ORA-02019: connection description for remote database not found
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.j(e.java)
     at com.sunopsis.dwg.cmd.h.z(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Please advice me on the correction.
Many Thanks!

Hi All,
I am seeing things are working fine, when I am using LKM SQL to Oracle in combination with IKM Oracle Incremental Update. It is only in the case of using LKM Oracle to Oracle(DBLINK) in combination with IKM Oracle Incremental Update, that the above mentioned error is thrown.
Please suggest on the resolution in using LKM Oracle to Oracle(DBLINK) with IKM Oracle Incremental Update...
Thanks!

RMI Error when trying to connect to remote server

We are getting an RMI error (below) when trying to connect to a remote weblogic 9 server with mission control.
We are running a portal application on the app server. If we connect using mission control before the app starts then mission control connects successfully.
If we wait until the portal application is running then we get the following error when we try to connect:
Could not open Management Console for UAT Live (1).
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:162)
     at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
     at javax.management.remote.rmi.RMIConnectionImpl_Stub.getMBeanInfo(Unknown Source)
     at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getMBeanInfo(RMIConnector.java:1031)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:262)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:297)
     at com.jrockit.console.rjmx.RJMXConnectorModel.initializeAttributeInfos(RJMXConnectorModel.java:294)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:99)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:113)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:36)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:73)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:371)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:165)
     at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:620)
     at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:247)
     at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:197)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1544)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1699)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
     at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:290)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:139)
     ... 11 more
thanks

As poorem suggested, I would check that the time is the same on both the identity and vcac appliances. It has been a while since I posted this question but I believe that did get me past that specfic error. I changed the timezone on each and made sure the times were correct and the same.

Error when updating software (OS6) for BB9300

Hi,
Please help me, when I try updating the the OS of my BB9300 it says : there's an error when updating your software.
I want to update my OS to OS6.
PS, I use BB Desktop Software Manager.
Many Thanks! and Godbless!

Multiple posts of the same message:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/can-upgrade-my-OS/m-p/3012574#nobanner
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types. You do not have enough access privileges for this operation." How to fix?

After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player. It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types." I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem. Any suggestions? Thanks.
J

Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

When i try to go onto my FaceTime it comes up error please check mobile connection what does this mean???

When i try to go onto my FaceTime it comes up error please check mobile connection what does this mean???

See if this article helps: FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support

After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

Try downloading it with another browser.
If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

Error when updating Playbook OS version via Blackberry Desktop Manager

Greeting,
I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
I've attached the step by step screenshots for reference, where you can find here:
http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
Thanks,

BLock wrote:
Sorry I can not help you with your problem but perhaps you can help me.
Can you advise where I can find info on "disable the automatic update"?
just ignore the update if you dont want it on the playbook
for reloading the OS
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

ORA-0209:Connection discription for remote database not found

Please help me with this oracle error.
I have create a DB link to connect to the Oracle database from a remote Oracle DB. I am able to query the select statement through DBLINK and i also created the Synonym for the same. But still iget the below error in the DB package when i am inserting one row into the same table for which i created a synonym with the DBLINK
ORA-0209:Connection discription for remote database not found
ORA-02063:preceding line from DBLINK
Please help me if anyone can give me a appropriate answer.
Thanks in advance for all those who try to help me

Sorry for the Typo mistake ..
The ORA error code is not ORA-0209 but it is ORA-02019

Errors when trying to connect CRM 7.0 to Enterprise Search

Hi!
I encountered 2 errors when trying to connect to a CRM 7.0 system as a backend system from Enterprise Search Cockpit.
The first error is related to ESH_INT_GET_TREX_DESTINATION with a message of ESH_OM_OBJ_MODEL_REP 517:
http://img39.imageshack.us/img39/9722/eserrors1.jpg
The second error is related to "Errors during data cluster import from remote system":
http://img97.imageshack.us/img97/7976/eserrors2.jpg
I don't know if these two errors are related, but any help or suggestions will be greatly appreciated!!
Thank you!
Regards,
Paul

4.0 should be fine. My initial thoughts were on the script targetting a framework lesser than 3.5. Am bummed about the error cause in the line
ClientContext clientContext =
new ClientContext(client);
it just creates an instance of the ClientContext class. It should have nothing to do with permissions cause it is not even trying to connect to the sharepoint site. So it looks like it can't find the assembly. Can you place the asembly
under the Microsoft.Net\Framework folder of your machine. SSIS looks for custom assemblies in this folder on design time (Refer
this) Worth a try hey!
http://btsbee.wordpress.com/

There was an error when attempting to connect to the Windows Live Calendar service.

I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
Can anyone help me, no sense sending me an email, I cannot get into my email.
Lucienne1

Hi,
Try installing Windows 2012 Live Essentials here.
You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
Are you using an Internet Service Provider Email account or a cloud based (IMAP) Email account?
Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
Jaco
****I am not an HP employee****
Errare humanum est.

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Error when updating Mobile Connect Schedule for Remote Destination

Similar Messages

Maybe you are looking for