Error when uploading file :( Return code = 6 )

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

Hi,
If the Sy-Subrc is 0 then Success,
Sy-SUBRC is 4 then failure,
Sy-SUBRC = 6 then the user might be not access to read the file.
This is due to authorization issue.

Similar Messages

Error when uploading file : Return code = 6 in LSMW

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

did you define the file in step 7 without any error and allocate in step 8 without any error before?
I mean in the same system where you execute the read step.
Make sure you have the file not open when you execute the read step.

LSMW Error When Uploading file (Return Code = 7)

Hi all,
I got this message in step 9 'Read Data'. I've checked everything about file i'm doing as always. The fle is not open during the steps and file format is Text (tab delimited). Could you please tell me what is the problem?
Regards

RC 7 = unknown error
you can just be sure that it is not one of the other listed errors:
file_open_error               = 1
file_read_error               = 2
no_batch                      = 3
gui_refuse_filetransfer       = 4
invalid_type                  = 5
no_authority                  = 6
unknown_error                 = 7
bad_data_format               = 8
header_not_allowed            = 9
separator_not_allowed         = 10
header_too_long               = 11
unknown_dp_error              = 12
access_denied                 = 13
dp_out_of_memory              = 14
disk_full                     = 15
dp_timeout                    = 16
OTHERS                        = 17
you may have to debug the read program. Click personal menu, then activate the box in from of display read program.
you get a new step 9, which gives you the source for the read program. there you can set breakpints for the debugger, which will start when you execute the read step (which is then step 10)

LSMW Error When Uploading file (Return Code 1)

Hi SAP peeps,
Just upgraded from ECC6 EHP5(SAPKH60507) to EHP7(SAPKH61707), and trying to copy over an LSMW into EHP7 using export/import Project...
The export/import works fine from eg. EHP5 to EHP5, but the import into EHP7 is getting an error... It's not even getting to the point where the .TXT file is even imported into the new system. It's getting stuck trying to select the damn file off the local machine...
I've debugged it and this is what it's doing in EHP7:
In FM /SAPDMC/LSM_PROJECT_IMPORT2, it's doing a call to CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
This is supposed to return 1x row for the .TXT file I've selected for Import (file from prior Export)
The file entry resides in: CHANGING       FILE_TABLE              = l_filetable
However, in EHP7, it seems to have a bug in it such that there are 2x rows in l_filetable - the 1st of which is BLANK!
The subsequent read of this table and call to FM 'GUI_UPLOAD' is not very happy about this:     read table l_filetable index 1 into l_filename.
     CALL FUNCTION 'GUI_UPLOAD' EXPORTING FILENAME                      = l_filename .......
Exporting/Importing from EHP7 to EHP7 also has the issue - so seems to be specifically related to EHP7 Import functions...
I've also debugged EHP5, and this BLANK row doesn't appear in the table l_filetable, and therefore the issue does not occur...
Could this be Unicode related somehow? If so, what to do and how to fix? The EHP5 was made Unicode compliant before the upgrade started as it was a mandatory pre-req...
Any ideas? Anyone seen this before? Any thoughts appreciated... Can't find any SAP OSS notes related to this either... :\
Cheers,
Nick

Hello,
Please implement the SAP note 2066358 and test again.
Regards,
David

Error when uploading file in TA: SFP (Form Builder)

Hi Everybody,
i am having a problem in Transaction SFP (Form Builder)
I download a Form Objekt and it was written correct in my Local Drive with the ending xxxx.XML.
Then i wanted to Updold the file, then it says:
"Error occurred when uploading file (unknown file format)
Message no. FPUIFB068"
we are using ERP2005 Rel. SAP ECC 6.0
Hope to hear a solution for my problem.
thank + regards
I.Ismail

Hi All,
Even I faced the same issue whenI tried to upload the form which was developed in Standalone Live cycle designer and I wanted to upload the same into SAP SFP. Initially I felt that this kind of activity might be supported by SAP Adobe Live Cycle deisgner, But it says the Error wron file foramt....
So what I felt is instead of trying to upload the form by using the tool provided by SAP... I directly copy pasted the XML source code into the SFP newly ccreated blank form. ya..it displays some warning messages...But still since I used a Printable form so I could not face any issue...Might be there would be some effect of this warning in Interactive forms.....
But for copying this you donot want to be a expert in the XML area.. All I did was just copied the source xml file from the line <TEMPLATE> tag and till the end and I replaced in the target xml fiel from the same tag from the top <TEMPLATE>....
and save and activate.....
Regards
Pavan
Edited by: Pavan Bhamidipati on Mar 25, 2011 11:58 AM

Error when uploading file

Hi all,
we just have upgraded our EREC system to Enhancement Package 4, and we have now lot's of issues when the candidates try to upload documents in their cockpit. Even if the type of document is ok or the file size is fine also, there is the following error message : Error when uploading; the file name is invalid, or the file is too big
We have this error with lot's of web browser : IE6-IE7-IE8-Firefox 2.xx-Firefox 3.6-Safari 3 and 4-Chrome
It is impossible to debug this error, there is no stop at the breakpoints.
Did anyone have any suggestion ?
Our system information :
EREC 604 SP 5
NW 701 SP 5
Thanks in advance
Dominique

Hello Sai,
we already put an external breakpoint on the first step of the method called by the button, but it does not stop on this breakpoint.
It looks like the error message is generated by javascript or is in the cache, but it is not possible to find where.
WD component : HRRCF_C_ATTACHMENTS_UI
View : VW_ATTACHMENT_DETAIL
Method : ONACTIONAPPLY
Thanks for your help
Dominique

Http 401 error when uploading file to content services

Hi,
When i try to upload a document, the document is created in the folder with empty content and i have the 401 http error.
Someone can help me to resolve thise problem.
Thank's for advance.

I found the response to the problem. I summarize the solution in the following point :
1- when you connect to a standalone content services server via the webservices api, you get a single String as cookie and to upload a document to server you use the same single cookie.
2- bu when you connect to cluster content services via the webservices api, you get an Array of String as cookies and to upload a document to server you need to transform the array of cookie into a single String cookie to be able to be authenticated by the http server, look to the following code
String cookie="";
for(int i=0;i < connection.getCookie().length;i++) {
cookie = cookie + connection.getCookie() +";";

Hiii capturing error when uploading file from sap to Server

hiii
i am taking data from an internal table which is as follow
ITAB:
colA(35) type c
colB(35) type c
when doing opendataset
OPEN DATASET lv_directory FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
spliting my itab by the delimiter "|"
i need file already exist i must not over overwrte the file i must throw an error but how do the open dataset for output will overwrite the file how do i prevent that. how can i check that a file of that name exist.
do i try to open dataset for input first then if sy-subrc EQ 0 it meant that a filename already exist

Hello,
Do something like this:
DO.
READ DATASET file INTO <hex_container>.
IF sy-subrc = 0.
" File exists
ELSE.
OPEN DATASET....
ENDIF.
ENDDO.
Regards.

Error occurred when uploading file (unknown file format) in t.code SFP

Hi,
According to SAP Note 1465628 - ESI Limit increased and length of temp. ESI no increased, when we are doing Step 4. PDF form changes (valid for ECC 6.0 and above)....and point (i)...in transaction SFP (From - HR_IN_ESI_005_99), system shows the below message.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Plz guide..

Hi Anil,
Refer following links :
Re: Adobe Form assignment
Adobe Uploading form error unknown file forma
Hope this will help.
Regards,
Vivek

LSMW: "Error in Uploading File" error code 6

Hi All,
I have created a simple LSMW project for deletion of Purchase Requisition in Development server. It is working as per the requirement there. But when I tried to Export the project and import it into our Production Server, system gives "Error in Uploading file".
Hence, I recreated the project in Production system. Here again when I reached the step "Read Data" the same error occured. I wanted system to read the Purchase requisition numbers from a text file which i have already mapped in the steps previous to " Read Data".
Also, system says "Error Code 6"
Can anyone please highlight possible causes of this error message?
Regards,
Vishal Data

Hi,
first you have to check TEXT file data - why because you are tested in Development server with test data , but that same test date not available in Production server na
prepare PR numbers from Production server -convert into Txt. format
while running LSMW - close all Excel file and Text file ,
at the time of Import and Export - system will start Specify Files- item - that time you will give Production data Text file then Upload
I think now you can't face any error
Mahesh

When "Upload File" , show the IE error page

question: when "Upload File" , show the IE error page. How to soluve the problem?

Duplicate post.
when "Upload File" , show the IE error page
when "Upload File" , show the IE error page

Unknown File Format Error while Uploading file through SFP in Note Implemen

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing the manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Unknown File Format Error while Uploading file through SFP

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Error: OCIEnvCreate failed with return code -1

I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanks

792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle.

Error when uploading file :( Return code = 6 )

Similar Messages

Maybe you are looking for