Error when using GetOracleString of reader
Oracle 10.2.0.1
Windows xp
VS Studio 2005
My procedure is running in sqlplus in which i have used rpad function to get fixed column width output something like :
select rpad(col1,20,' ') item from table_1
Now, when i says :
Dim myReader As System.Data.OracleClient.OracleDataReader
myReader = myCMD.ExecuteReader(CommandBehavior.CloseConnection)
ListBox1.DataTextField = myReader.GetOracleString(0)
It is error "No data exists for the row or column." The calling procedure is returning only one column named "item".
But if i says :
ListBox1.DataTextField = "ITEM".ToString
Its working fine. But, I need the as its working in sqlplus (the effect of Rpad function). In dotnet when i uses with listbox datatextfield; it removes the effects of rpad function.
Please help me how to do this.
Please let me know, if i am unclear in question anywhere.
Thanking you.
Thanks for your reply.
The solution is set the with property from ListBox control.Is there typo in "with" word ? Is it width property?
I tried to increase the width property... but no use.
Even, i have tried with following code, but no use :
While myReader.Read()
Dim str As System.Data.OracleClient.OracleString
str = myReader.GetOracleString(0).ToString
ListBox1.Items.Add(str)
End While
I think ListBox1.DataTextFormatString should work here; but what should be that format string... i am not getting it.
Thank you.
Similar Messages
-
Error when using PPR in the OA page developed.
HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block. -
Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?
Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.
-
UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)
Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
//Example calling DSE internal function
//UserFunc.uStop("Terminated by user");
key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
OutString = UserFunc.uDESEncrypt(key, Par);
return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
MattHi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems... -
Any help will be greatly appreciated.
I got the following errors when using the ant task source2wsdd:
[source2wsdd] classpath C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogi
c81\server\lib\webservices.jar
[source2wsdd] source2wsdd: Cannot find doclet class weblogic.webservice.tools.dd
gen.ServiceGen
[source2wsdd] 1 error
[ant] Exiting C:\project\DCII\ant\batch-build.xml.
BUILD FAILED
C:\project\ant\build.xml:67: The following error occurred while executing this l
ine:
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:388)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Caused by: C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
... 10 more
--- Nested Exception ---
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Total time: 8 seconds
The following is the major parts from my ant build file:
<path id="webservice.classpath">
<pathelement location="${wls.home.dir}/server/lib/weblogic.jar"/>
<pathelement location="${wls.home.dir}/server/lib/webservices.jar"/>
</path>
<target name = "initialize">
<mkdir dir="${build.dir}"/>
<mkdir dir="${class.dir}"/>
<mkdir dir="${dist.dir}/${deploy.env}"/>
<mkdir dir="${jdocs.dir}"/>
<mkdir dir="${weblogic.application.dir}"/>
<taskdef name="call"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.Call"/>
<taskdef name="if"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.IfTask"/>
<taskdef name="servicegen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask"/>
<taskdef name="clientgen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask"/>
<taskdef name="source2wsdd"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD"/>
<taskdef name="wldeploy"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.management.WLDeploy"/>
</target>
<target name="buildEar"
depends="buildCommonJar, ejbc">
<echo message ="[${module.name}] Checking to see if ${ear.file} is up to date...[${appc.classpath}]" />
<source2wsdd
javaSource="${webserviceServer_src_dir}/HelloWorld.java"
ddFile="${descriptor.dir}/webservice/web-services.xml"
serviceUri="/HelloWorld">
<classpath refid="webservice.classpath" />
</source2wsdd>
<echo message ="[Done with buildEar]" />
</target>Did you ever resolve this?
-
Error When Using Class :(
Hey,
Class:
package
import flash.display.MovieClip;
import flash.events.Event;
public class Main extends MovieClip
public var enemyA:Array = [];
public var birdA:Array = [];
public var rowNum:int = 2;
private var gap:int = 100;
private var obj_no = 2;
public var enemy1:mychar = new mychar();
public var TheBird:BirdChar = new BirdChar();
public function Main()
// constructor code
createEnemyF();
createBirdF();
this.addEventListener(Event.ENTER_FRAME,loopF);
public function createEnemyF()
for (var i:int = 0; i < rowNum; i++)
for (var j:int = 0; j < obj_no; j++)
enemy1.x = Math.random() * stage.stageWidth - enemy1.width;
enemy1.y = - i * (gap + enemy1.height) - 30.65;
enemyA.push(enemy1);
addChild(enemy1);
public function createBirdF() {
TheBird.x = 270.95;
TheBird.y = 350.95;
birdA.push(TheBird);
addChild(TheBird);
public function loopF(event:Event) {
updateEnemyPositionsF();
updateBirdPositionsF();
hitTestF();
public function updateEnemyPositionsF() {
enemy1.y += 2;
public function updateBirdPositionsF() {
TheBird.x = mouseX;
public function hitTestF() {
if(TheBird.hitTestObject(enemy1))
gotoAndPlay(5);
trace('The Bird Hit Enemy 1');
This conflicts and causes this error:
1046: Type was not found or was not a compile-time constant: MouseEvent
^ ^ Code repeats to all of my event listeners
Thanks for your time.Thanks, i thought it might be this because of previous problems but i seen i already had : import flash.events.Event; so i thought that would be OK!
Second Error:
1180: Call to an undefined method Timer.
I think this is the same sort of thing but what to import to fix this?
So far these are my imports:
import flash.display.MovieClip;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.events.TimerEvent;
Thanks for helping.
Date: Thu, 3 Nov 2011 05:36:22 -0600
From: [email protected]
To: [email protected]
Subject: Error When Using Class
Re: Error When Using Class
created by markerline in Flash Pro - General - View the full discussion
Looks like you imported events.Event but not events.MouseEvent (or some similar syntax) basically you must import MouseEvents separately from other Events.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4005227#4005227
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4005227#4005227. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
RPC Server not Available error when using Windows Fax & Scan under Windows 7
RPC Server not Available error when using Windows Fax & Scan under Windows 7
Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
FSG Error when using segment override
Hi,
I have the following error when using segment override :
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RGRARG module: Financial Statement Generator
+---------------------------------------------------------------------------+
Current system time is 26-APR-2012 11:17:22
+---------------------------------------------------------------------------+
Starting Program RGRARG.
Arguments are:
0 RGRARG - RGRARG
1 username/password - username/password
2 0 - 0
3 Y - Y
4 Data Access Set ID - 1030
5 Chart of Accounts Id - 101
6 ADHOC Prefix - FSG-ADHOC-
7 Industry - C
8 Flex Code Id - GLLE
9 Default Ledger ID -
10 Report ID - 1011
11 Row Set ID - 3461
12 Column Set ID - 1018
13 Period of Interest - SEP-11
14 Unit of Measure ID - IDR
15 Rounding Option - C
16 Override Values - ----DIV3---000000
17 Content Set ID -
18 Row Order ID -
19 Report Display Set ID -
20 Output Option - R
21 Exceptions Flag - N
22 Miniumum Display Level -
23 Effective Date -
24 Parameter Set ID - 1011
25 Maximum Page Length - 58
26 Sub-Request Run ID - -998
27 Application Shortname - SQLGL
Message level is: Normal
rgrini() 26-APR-2012 11:17:22 rgrini.build_per_arr:
Query for period set name from GL_ACCESS_SETS
SELECT period_set_name
FROM GL_ACCESS_SETS
WHERE access_set_id = 1030
rgrini.build_per_arr:
period set name from GL_ACCESS_SETS:
ACCOUNTING
rgrini.build_per_arr:
Query for period names from GL_PERIODS
SELECT period_name,
to_number(to_char(end_date,'YYYYMMDD'))
FROM GL_PERIODS
WHERE period_set_name = :p_value
ORDER BY NLSSORT(period_name,'NLS_SORT=BINARY') ASC
control->report_id = 1011
control->row_set_id = 3461
control->column_set_id = 1018
control->row_order_id = 0
control->content_set_id = 0
control->display_set_id = 0
control->parameter_set_id = 1011
control->resp_lvl = 0
control->round_option = C
control->output_option = R
control->excp = FALSE
control->sub_req_run_id = -998
control->appl_id = 101
control->id_flex_code = GLLE
control->ldg_val_set_id = 1010673
control->ledger_id = 0
control->ledger_name =
control->ledger_currency =
control->access_set_id = 1030
control->security_segnum = 0
control->per_cnt = 162
control->runtime_currency = IDR
control->resp_id = 50386
control->resp_appl_id = 101
control->enforce_security = TRUE
control->sec_rules = NULL
control->reduced_ranges = NULL
control->num_reduced_ranges = 0
control->max_char_width = 1
control->total_num_cols = 0
control->page = NULL
<< rgrini() 26-APR-2012 11:17:22
rgranl() 26-APR-2012 11:17:22Current date and time: Thu Apr 26 11:17:22 2012
rgrgsa() 26-APR-2012 11:17:22
<< rgrgsa() 26-APR-2012 11:17:22
rgrdrs() 26-APR-2012 11:17:22req_id_str =
809694
rgrdpg.rgrdpg: Unable to read value for profile option RG_DEBUG_ON..
rgrprt.rgrprt: Defaulting value for profile option RG_DEBUG_ON to FALSE..
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 1018
<< rgrgas() 26-APR-2012 11:17:22
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 3461
<< rgrgas() 26-APR-2012 11:17:23
rgrgrp() 26-APR-2012 11:17:23
<< rgrgrp() 26-APR-2012 11:17:23
COA Structure :
Segment: LEDGER_SEGMENT : Ledger
Segment: SEGMENT1 : COMPANY
Segment: SEGMENT2 : ACCOUNT
Segment: SEGMENT3 : PRODUCT
Segment: SEGMENT4 : DIVISION
Segment: SEGMENT5 : DEPOT
Segment: SEGMENT6 : COST CENTER
Segment: SEGMENT7 : FUTURE
Segment value security is enforced for Financial Statement Generator reporting.
rgrrsr() 26-APR-2012 11:17:23
rgrrsf() 26-APR-2012 11:17:23
<< rgrrsf() 26-APR-2012 11:17:23
<< rgrcrl() 26-APR-2012 11:17:23
<< rgrrsr() 26-APR-2012 11:17:23
rgrpsr() 26-APR-2012 11:17:23The COMPANY segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COMPANY values will be processed.
The ACCOUNT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All ACCOUNT values will be processed.
The PRODUCT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All PRODUCT values will be processed.
The DIVISION segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DIVISION values will be processed.
The DEPOT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DEPOT values will be processed.
The COST CENTER segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COST CENTER values will be processed.
The FUTURE segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All FUTURE values will be processed.
<< rgrpsr() 26-APR-2012 11:17:23
rgrdrs.rgrdrs: Getting value for profile option EXPAND_PARENT_VALUE equal No.
PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found
<x get_def_ldgs() 26-APR-2012 11:17:24
<x get_def_ldgs() 26-APR-2012 11:17:24
rgrgax() 26-APR-2012 11:17:24 rgrgax:get_axes
Starting axis query.
rgumsg:
fdnwsc() is used by default
rgrgax.get_conts - Prepare:
ORA-00936: missing expression
Current date and time: Thu Apr 26 11:17:24 2012
Entered sauulc with code 1 from line 3333 of file rg/lib/rgrgax.c.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??
please advise
thxI have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??If none of the docs help, please log a SR.
Thanks,
Hussein -
Getting Compilation error when used SET or MULTISET operator on nested tabl
Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response. -
Compilation error when used SET or MULTISET operator on nested tables
Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.Hi,
Thanks for ur reply...
Since MULTISET and SET operators are the new additions in base 10g release for manipulation of nested tables data, I am surprised that same is working in similar 5 DBs installations with 10.2.0.1.0 version, but does not work in the sixth.
SET and MULTISET operators are used inside the PL/SQL procedure which is getting compiled in the above mentioned 5 DBs but not in sixth DB.
it gives
On line: 3112
PLS-00306: wrong number or types of arguments in call to 'SET'
Hope this clarifies the issue... -
ME21N Runtime error when using u201CDocument overview onu201D
Hi Gurus,
****I encountered Runtime error when using u201CDocument overview onu201D with variant u201CMy purchase ordersu201D or u201CPurchase orders on holdu201D. I encountered following ABEND message.
Varaint SAP&MEPOBEST not created
****I faced another issue which is mentioned below.
All page activities are blocked when using u201CDocument overview onu201D with variant u201CPurchase Ordersu201D or u201CContactsu201D .
Please reply.Hello,
To use that form you need to configure ADS in your system.
I sugest you to read the ADS configure manual and the troubleshooter note: SAP Note Number: 944221 -
Error when using filter on date column in interactive report
Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated. -
Error when using data postion delay
I obtained this error when using data position delay. Can anyone please
tell me the reason why I can not configure the delay to be between 0.7
and 0.8.
Possible reason(s):
Driver Status: (Hex 0xBFFA403F) Unable to configure requested delay property given the current clock rate.
Ensure that the delay value specified is within the valid range for the
frequency specified or do not configure property for delay operation.
Device: PXI1Slot2
Property: Data Position
Sample Rate: 40000000.0
Requested Value: 0.71875
Supported Values: 0.000 through 0.200, 0.300 through 0.700, 0.800 through 1.000,
Status Code: -219401Timothy,
The 656x devices have a limit on the available data delay values based
on frequency. Between 25MHz and 50MHz there are "holes" in the
available delay range. Above 50MHz, the full 0 to 1 data delay is
valid. If you look in the specifications installed with NI HSDIO
for the NI 656x, on page 7, Figure 1, there is an illustration showing
how to compute what the valid range is for the frequency of interest.
For example, at 40MHz, valid values are:
0 to 0.2
0.3 to 0.7
0.8 to 1
In the error message posted below, you tried to input a value of 0.71875 which is not within these ranges. -
Burning error when using toast
i am using leopard 10.5.5 and using toast 9.0.2 with the hd plugin.
i am getting an error when trying to burn a dvd, i have created a file in an animation program, taken it into final cut pro, edited what i wanted, then exported it as 1080i50. the file plays no problem in quicktime on my laptop, but i need to put it on DVD. opening up toast, it goes into the prog window, encodes the file but then i get an error, -50, can not burn DVD.
does anyone know of this problem, or maybe has any ideas on what i can do to work out the problem?
cheers
bretBruce Etnyre wrote:
His first sentence states the OP is using 10.5.5 and apparently has not updated the profile.
sure confused me
I occasionally get errors when using Toast to burn DVD’s. I found quitting other applications during the burn eliminated the errors. Not the optimal solution, but it couldn’t hurt to try.
I think he is referring to HD DVDs per his first sentence, but it's not clear to me.
It could be anything from a bad blank to a flaky optical writer to, as you mention, other software running. I usually turn all my apps off when burning DVDs. Mail, Safari, Firefix, etc., although on fast machine like this one it probably does not matter.
On the other hand, when I burn a R/W DVD or CD, I ignore these things and just computer as usual.
Maybe you are looking for
-
Hi, I was wondering if anyone could help or give me some ideas for this problem I have. The web site that I'm developing uses jsp. It has a public section and a private section that requires a username and password to log in to it. Users have the abi
-
Modify the STARTTIME (DTSTART) of an event.
Concerning C FUNCTION CSDK_StoreEvents (or Java FUNCTION Session.storeEvents): To modify the start time of an event instance (whether the event has only the single instance or multiple instances is irrelevant), you must set the RECURRENCE-ID property
-
Cannot find my Satellite L350-10H - external video full HD output
Hello Everybody. I have a problem with my satellite L350-10H when I try to attach a second external monitor in full HD. In fact Im only able to duplicate my Notebook Display with the same resolution (1440 x 900). The System don't allow me to set a Fu
-
Can't get the patch/bank window for an external midi device to stay open
I am going to be very explicit with the description of my problem. I am running Snow Leopard (10.6.1) and using Logic 9.0.1 on a MacBook Pro (2.16GHz, Intel Core 2 Duo, 4 GB memory). I create a new empty project and add an external midi track. I clic
-
So, I was trying to configure the fan on my Thinkpad T510, which led me to download tpfand-no-hal, which led me to download tpfan-admin, which ran into the following problem: libgksu is a dependency, but when I write $ sudo pacman -S libgksu I get