Error while classifying resource

Hello All:
We are receiving the following error when we navigate to details->classification for all of our content resources in KM.
An error occurred during classificationError while classifying resource [our resource here] for taxonomy Explore.com.sapportals.wcm.WcmException: invalid parameter for TRexTextMining request (Errorcode 9005)
We are on NW 04 SP 14 and TREX 6.1.  Does anyone have an idea what may be causing this?
Thanks in advance.

Looks like we figured it out.  We have created a custom search application and deployed it to our environments. We then restarted the environments due to the known issues with hot deploying custom KM applications.  However, several nodes where not shutting down properly.  When we shut down the environment properly, this problem was resolved.

Similar Messages

  • Error while creating resource group using non-globalzones.

    Dear all,
    Hi techs please guide me how to create failover resource group in nongloablzones.
    I'm getting error while creating resource group using non-globalzones.
    My setup:
    I have two node cluster running sun cluster 3.2 configured and running properly.
    node1: sun5
    nide2: sun8
    I have create non-globalzone "zone1" in node:sun5
    I have create non-globalzone "zone2" in node:sun8
    node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
    *(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
    kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
    Thanks in advance,
    veera
    Edited by: veeraa on Dec 19, 2008 1:54 AM

    Hi Veera,
    Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
    zoneadm list -iv
    If zone1 or zone2 are not running then boot and configure them
    zoneadm -z <zone> boot
    zlogin -C <zone>
    After that you can continue to follow the step by step instructions at
    http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
    These may also help
    http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
    http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
    Regards
    Neil

  • Problem installing Circuit Design Suite - "Error while initializing resource loader"

    I am attempting to install v 10.0.1 of the Circuit Design Suite (Education and Student Edition).  Immediately after starting the install process I get the message "Error while initializing Resource Loader!" and the installer exits.  My computer meets the minimum system requirements (512 MB RAM, 20 GB free hard drive space, Windows XP, etc).
    Any suggestions for how to work around this problem so I can get Multisim installed?

    Hi John,
    I'm not sure if you still have issues with the Multisim installer. But just in case here are some comments:
    Are you using a CD to install Multisim? If yes, try copying the installer to your hard drive.
    Try installing Multisim on a different machine.
    Apparently the Resource Loader is related to Java, try un-reinstalling it, upgrading to the latest release, etc.
    Let us know how it works,
    Fernando D.
    National Instruments

  • Error while provisioning resource object to any user

    I get below error while trying to provision or reconcile any user to AD resource object. This was working fine till yesterday and suddenly started behaving otherwise.
    This error occurs while provisioning to the user i.e., as we de-selected auto save option on the process definition, it does not show up the process form while manually provisioning the resource instead show DOBJ.UPDATE_FAILED error on the web console.
    I tried provisioning the resource by removing all the pre-populate adapters from the process form with no luck
    This is on OIM 9.1.0.2 BP12
    Has anyone faced similar issue before or any pointers to resolve this ??
    ERROR,15 Aug 2013 16:11:38,482,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01407: cannot update ("IDM"."OIU"."OST_KEY") to NULL
    java.sql.SQLException: ORA-01407: cannot update ("IDM"."OIU"."OST_KEY") to NULL
            at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
            at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
            at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
            at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
            at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
            at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
            at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
            at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
            at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
            at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
            at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
            at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
            at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
            at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
            at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.updateImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.provision(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.eventPostInsert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.provisionObject(tcUserOperations_voj9p2_EOImpl.java:2651)
            at Thor.API.Operations.tcUserOperationsClient.provisionObject(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor499.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.security.Security.runAs(Security.java:41)
            at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
            at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
            at $Proxy68.provisionObject(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyResource(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor492.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
            at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
            at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
            at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
            at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
            at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
            at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,15 Aug 2013 16:11:38,485,[XELLERATE.SERVER],Class/Method: tcTableDataObj/updateImplementation encounter some problems: {1}
    com.thortech.xl.orb.dataaccess.tcDataAccessException
            at com.thortech.xl.dataaccess.tcDataAccessExceptionUtil.createException(Unknown Source)
            at com.thortech.xl.dataaccess.tcDataBase.createException(Unknown Source)
            at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
            at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.updateImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.provision(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.eventPostInsert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.provisionObject(tcUserOperations_voj9p2_EOImpl.java:2651)
            at Thor.API.Operations.tcUserOperationsClient.provisionObject(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor499.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.security.Security.runAs(Security.java:41)
            at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
            at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
            at $Proxy68.provisionObject(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyResource(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor492.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
            at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
            at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
            at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
            at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
            at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
            at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by [Nested Exception]:
    java.sql.SQLException: ORA-01407: cannot update ("IDM"."OIU"."OST_KEY") to NULL
            at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
            at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
            at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
            at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
            at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
            at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
            at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
            at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
            at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
            at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
            at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
            at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
            at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
            at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
            at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.updateImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.provision(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.eventPostInsert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.provisionObject(tcUserOperations_voj9p2_EOImpl.java:2651)
            at Thor.API.Operations.tcUserOperationsClient.provisionObject(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor499.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.security.Security.runAs(Security.java:41)
            at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
            at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
            at $Proxy68.provisionObject(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyResource(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor492.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
            at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
            at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
            at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
            at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
            at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
            at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,15 Aug 2013 16:11:38,490,[XELLERATE.SERVER],Class/Method: tcDataObj/update Error :Data Update Failed
    ERROR,15 Aug 2013 16:11:38,492,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Data Update Failed
    ERROR,15 Aug 2013 16:11:38,493,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
    java.lang.Exception: Rollback Executed From
            at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.provision(Unknown Source)
            at com.thortech.xl.dataobj.tcOIU.eventPostInsert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.provisionObject(tcUserOperations_voj9p2_EOImpl.java:2651)
            at Thor.API.Operations.tcUserOperationsClient.provisionObject(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor499.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.security.Security.runAs(Security.java:41)
            at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
            at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
            at $Proxy68.provisionObject(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyResource(Unknown Source)
            at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
            at sun.reflect.GeneratedMethodAccessor492.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
            at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
            at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
            at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
            at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
            at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
            at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
            at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
            at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,15 Aug 2013 16:11:38,499,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
    ERROR,15 Aug 2013 16:11:38,501,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
    java.lang.Exception: Rollback Executed From
            at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
            at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
            at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperationsSession.provisionObject(Unknown Source)
            at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.provisionObject(tcUserOperations_voj9p2_EOImpl.java:2651)

    Duplicate Post

  • Error while creating Resource using GDS

    Hi
    Iam trying to create Resource using GDS and it is throwing me error
    clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
    clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
    clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
    This is the command I executed
    rclresource create -g egateq00-rg -t SUNW.gds
    -p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
    -p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
    -p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
    -p Stop_signal=15 egateq00-haegate_reg-res
    The log under /var/cluster/logs/DS says following
    07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
    07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
    07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
    07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
    However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
    Iam not returning any return value from these Start and Stop script , is that the why it is failing
    thanks

    Hi
    I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
    1>Added following line in the top of my Start script
    while getopts 'R:G:' opt
    do
    case "${opt}" in
    R) RESOURCE=${OPTARG};;
    G) RESOURCEGROUP=${OPTARG};;
    esac
    done
    sleep 60 &
    /usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
    2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
    Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
    However, My Application is not started either.
    This is what the message file says
    Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
    e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
    Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
    Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
    resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
    Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
    t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
    Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
    te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
    Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
    s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
    Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
    start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
    , ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
    aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
    4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
    07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
    5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
    07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
    07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0

  • Error while viewing resource palette

    I installed latest 11gR1 nightly build and included the web center extension from the nightly build.
    I get this error when try to view the resource palette:
    Performing action Resource Palette[ from oracle.jdevimpl.help.HelpWindow ]
    Exception while performing action Resource Palette
    java.util.MissingResourceException: Can't find resource for bundle oracle.adf.mbean.share.connection.webcenter.rtc.resource.RtcMXBeanMessages, key RtcConnection.type.name
    j.util.ResourceBundle.getObject(ResourceBundle.java:325)
    j.util.ResourceBundle.getString(ResourceBundle.java:285)
    I tried this after adding the web center services catalog. I even got the confirmation message saying the web center services catalog was successfully added.
    Any idea of what am I missing? I want to add the document library service from the web center services catalog in the resource palette.
    Thanks,
    Ravi.

    Ravi,
    The version you're referring to is not available to customers, it's an internal development build. Please use the Oracle internal mailing lists to ask questions about this build.
    Thanks,
    Peter

  • Error while compiling resource Module (Very urgent)

    Hi all,
                While i was trying to compile my resource file to swf through command line '
    C:\Users\Karthikeyan R\Documents\Flash Builder 4\ttv_multiplethemes_localization>"C:\Program Files\Adobe\Flash Builder 4\Adob
    e Flash Builder 4\sdks\4.1.0\bin\mxmlc" -locale=fr_FR -source-path=locale\{locale} -include-resource-bundles=TtvText -output
    fr_FR_ResourceModule.swf'  in Flash builder4 using 4.1.0 sdk. I am getting an error like this.
    Exception in thread "main" java.lang.UnsupportedClassVersionError: flex2/tools/Mxmlc (Unsupported major.minor version 49.0)
            at java.lang.ClassLoader.defineClass0(Native Method)
            at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
            at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12 3)
            at java.net.URLClassLoader.defineClass(URLClassLoader.java:250)
            at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
            at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:272)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
    But i was able to convert to swf using Flexbuilder3.
    regards,
    Jayagopal.

    Hello,
    There can be so many reasons for this issue, system is not able to find any of the given option given in valuation variant which is linked to costing variant OKKN. Check the options given in valuation variant, it  must be pick from material master planning price1 or planning price 2 or info record price or pick the existing standard price. When system fails in any of these strategies its pops up the message you described.
    Maintain  price in material master fields or create info record for this material
    thanks
    Megha

  • Error while creating resource in SAP TM GUI and NWBC

    Hi Experts,
    I am trying to create a resource in SAP TM. But getting the following error, I have activated all the relevant business functions (tcode SFW5) and also relevant services (tcode SICF) but still unable to get away with the issue. The NWBC error is not only for resource but for any master data I want to create its showing the same issue (the page is not loading and its showing a cross mark) whereas it works for other things like freight order creation etc.
    Thanks & Regards,
    Aunkur De

    Can you please check whether all the business functions are active?
    Transaction: SFW5
    Note:
    All the required business functions for SAP TM are provided in SAP document.

  • Getting an error while accecing resource bundle from java file......

    I want to access the properties file to my java file ..
    My resource file named as "application" is in the resources package...
    and I am using following code to load the resource file into my java file...
    java.util.ResourceBundle rb = java.util.ResourceBundle.getBundle("resources.application",new Locale("en","US"));
    String message = rb.getString("welcome.heading");
    But getting following error....
    Exception in thread "main" java.util.MissingResourceException: Can't find bundle for base name resources.application, locale en_US
    at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
    at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)
    at java.util.ResourceBundle.getBundle(ResourceBundle.java:787)
    at javaapplication1.c.<init>(Main.java:26)
    at javaapplication1.Main.main(Main.java:47)
    Java Result: 1
    can anyone tell me whats the problem and why am i facing this error

    Hi Again,
    Now with a different problem.
    I have removed configuration and imported the configuration again. But now it is not recognizing API ( created by me with all common classes as java project).
    Structre of the application is as follows
    Cedapp -  ear file
    Cedejb   - ejb module
    Cedweb – web module
    Cedapi  - java project with common classes used in both ejb module and  web module and published as library. This refered in both the ejbmodule and web module.
    The problem now I am facing is that cedapi is not getting recognized by ejb module or web module. But it is available in used dcs of each.

  • Error while mapping resource

    Hi
    I am trying to map peoplesoft resouce but as soon as i select Peoplesoft Component Resouce from the new resource drop down list it comes up with the following error message.
    An unrecoverable error has occurred processing the request. Contact your system administrator.
    Syslog ID = LG-1221-112149.
    I can successfully map to othe resouces like Remedy, Novell , Windows AD etc.
    Any help / suggestion is appreciated
    Thanks

    Are you trying to map Peoplesoft using ActiveSync if ys, what is the resource you are trying to map Peoplesoft to?
    Pls let me know.
    Regards,
    Zebra8

  • MBean not found error while creating Resource Adapter

    Hi,
    During the post installation configuration of Oracle Identity Manager, I had to create Resource Adapter as mentioned in the steps below. In the final step, when I click OK, I’m getting an error message “An error has occurred. MBean not found” (I had created a new oc4j container called oc4j_oim under which this is being done). Complete error message displayed is pasted at the end fyi. Kindly suggest a workaround for this issue.
    Steps followed:
    Create the required Resource Adapter in Oracle Application Server as follows:
    a) Log on to the Application Server Control.
    b) From the View By list, select Application Servers.
    c) Click the server instance.
    d) On the page that is displayed, click Administration.
    e) Click Enterprise Messaging, and then click Database Persistence. The JMS connectors for
    the Oracle Application Server instance that are currently configured for use with database
    persistence JMS providers are listed.
    f) Click Deploy.
    g) In the Resource Adapter Module Name field, enter oimOJMSRA
    h) Select Add a new resource provider to be used by this connector.
    i) In the Resource Provider Name field, enter oimOJMSRP
    j) From the Datasource JNDI Location list, select jdbc/xlXADS.
    k) Click OK.
    Detailed Error Message:
    oracle.sysman.ias.studio.sdk.IASRuntimeException: MBean not found at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:141) at oracle.sysman.ias.studio.oc4j.jms.JMXDeployDbProviderAdminBean.deployDBProviderAndConfigure(JMXDeployDbProviderAdminBean.java:173) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.deployDBProvider(DeployDbProviderHelper.java:242) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.handleEvent(DeployDbProviderHelper.java:127) at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283) at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385) at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
    S/W Details:
    Application Server 10.1.3.3.0
    Identity Manager 9.1.0.1
    Regards,
    CC

    Hi Srinivas,
    Please check ULS log for more useful information when this error occurs.
    Please also check if this issue could be reprodued in other libraries, if not, you can use the new library instead.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Mbean Error While Creating Resource Adapter

    Hi,
    During the post installation configuration of Oracle Identity Manager, I had to create Resource Adapter as mentioned in the steps below. In the final step, when I click OK, I’m getting an error message “An error has occurred. MBean not found” (I had created a new oc4j container called oc4j_oim under which this is being done). Complete error message displayed is pasted at the end fyi. Kindly suggest a workaround for this issue.
    Steps followed:
    Create the required Resource Adapter in Oracle Application Server as follows:
    a) Log on to the Application Server Control.
    b) From the View By list, select Application Servers.
    c) Click the server instance.
    d) On the page that is displayed, click Administration.
    e) Click Enterprise Messaging, and then click Database Persistence. The JMS connectors for
    the Oracle Application Server instance that are currently configured for use with database
    persistence JMS providers are listed.
    f) Click Deploy.
    g) In the Resource Adapter Module Name field, enter oimOJMSRA
    h) Select Add a new resource provider to be used by this connector.
    i) In the Resource Provider Name field, enter oimOJMSRP
    j) From the Datasource JNDI Location list, select jdbc/xlXADS.
    k) Click OK.
    Detailed Error Message:
    oracle.sysman.ias.studio.sdk.IASRuntimeException: MBean not found at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:141) at oracle.sysman.ias.studio.oc4j.jms.JMXDeployDbProviderAdminBean.deployDBProviderAndConfigure(JMXDeployDbProviderAdminBean.java:173) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.deployDBProvider(DeployDbProviderHelper.java:242) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.handleEvent(DeployDbProviderHelper.java:127) at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283) at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385) at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
    S/W Details:_
    Application Server 10.1.3.3.0+
    Identity Manager 9.1.0.1+

    Hi Veera,
    Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
    zoneadm list -iv
    If zone1 or zone2 are not running then boot and configure them
    zoneadm -z <zone> boot
    zlogin -C <zone>
    After that you can continue to follow the step by step instructions at
    http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
    These may also help
    http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
    http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
    Regards
    Neil

  • Error while editing resource configuration

    When I am trying to edit any resource configuration under the resource tab I am getting below erro.
    Does anyone has any idea what could be wrong?
    com.waveset.exception.ItemNotFound: Item AdminGroup:null(id=#ID#11D1DEF534EA1BE0:72D873:1069424B798:4802) was not found.
    Thanks
    Kapil

    Got it,
    I had exported one user from other IDM environment and imported into the environment where I was getting this error. That user was having some admin groups assigned which were not present in the IDM env.
    I just removed all the admingroups from that user entry and imported inot the system back.

  • OIM and OIA11g Integration(error while importing Resource metadata into OIA

    Hi,
    I followed the below link and trying to integrate OIM 11.1.1.5 and OIA 11.1.1.3.6
    And both are deployed different weblogic domains..
    http://wikis.sun.com/display/OIA11gDocs/Integrating+With+Oracle+Identity+Manager,+Preferred+Method
    I am getting error in Step 6: Import the Oracle Identity Manager (OIM) Data Into Oracle Identity Analytics (OIA) -> To Import Resource Metadata
    10:56:21,484 DEBUG [DBIAMSolution] publishing import starting event...
    10:56:21,623 DEBUG [OimUtilityFactory] ************** OIM Connection Params *************
    10:56:21,628 DEBUG [OimUtilityFactory] XL Home ---> C:\Oracle\Middleware\Oracle_IDM1
    10:56:21,630 DEBUG [OimUtilityFactory] login config ---> C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf
    10:56:21,631 DEBUG [OimUtilityFactory] ****************************************************
    10:56:21,636 DEBUG [OimUtilityFactory] Xellerate Discovery Settings {}
    10:56:21,638 DEBUG [OimUtilityFactory] ********** Connecting to OIM Server **********
    10:56:21,774 ERROR [IamDbNamespaceImporterHelperImpl] Error connecting to OIM
    Thor.API.Exceptions.tcAPIException: javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
         at Thor.API.tcUtilityFactory.<init>(tcUtilityFactory.java:166)
         at com.vaau.rbacx.iam.util.oracle.oimapi.OimUtilityFactory.getUtilityFactory(OimUtilityFactory.java:67)
         at com.vaau.rbacx.iam.db.helpers.IamDbNamespaceImporterHelperImpl.readNamespaces(IamDbNamespaceImporterHelperImpl.java:87)
         at com.vaau.rbacx.iam.db.DBIAMSolution.readResourceMetadata(DBIAMSolution.java:642)
         at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importResourceMetadata(RbacxIAMServiceImpl.java:472)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy274.importResourceMetadata(Unknown Source)
         at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:107)
         at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
    10:56:21,784 ERROR [DBIAMSolution] Error Importing Namespaces : javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
    10:56:21,836 DEBUG [DBIAMSolution] publishing import completed event...
    10:56:21,903 INFO [VaauSchedulerEventListenerImpl] Job executed: oim tst, IAM
    10:56:21,904 INFO [VaauSchedulerEventListenerImpl] Job run time: 0s
    10:56:21,904 INFO [VaauSchedulerEventListenerImpl] Next Run: null
    Thanks..
    Edited by: IDMuser19 on Aug 24, 2011 4:06 PM
    Edited by: IDMuser19 on Aug 25, 2011 10:58 PM

    Thanks rajiv for the reply..
    No i am not able to import users too..getting same error in the rbacx.log
    I tried with below details
    Xellerate Home: C:\Oracle\Middleware\Oracle_IDM1
    Login Config : C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf
    User Name: XELSYSADM
    Password : ●●●●●●●●
    ( in version 11.1.1.3.6 does not prompt for these two Provider URL: t3://localhost:14000 , Initial Context Factory: weblogic.jndi.WLInitialContextFactory)
    here the OIA and OIM are in different domains.. i am able loginto OIM with xelsysadm without any problem just followed the instruction in the integration doc not sure where i did a mistake..
    Please let know if have any idea..Thanks..
    Edited by: IDMuser19 on Aug 30, 2011 8:25 AM

  • UnAuthorised error while checking Resource History of provisioned account

    Hi Experts,
    I have provisioned an ACF2 account in OIM 11gR2, I wanted to check the resource history of the provisioned account. When i clicked on the resource history button,, i get error page saying:
    Just for information, i tired doing the same from SSL also
    Error 401--Unauthorized
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    *10.4.2 401 Unauthorized*
    The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
    Has anybody faced this issue? Please help!!

    Hi,
    I am working on OIM 11g R2 setup and facing the same issue.
    But the resolutions provided above is not working for me.
    I am using Safari v5 browser.
    Requesting help as I am stuck here.
    Thanks,
    Prasanna

Maybe you are looking for

  • Broken voice memos after sync -- any hope for recovery?

    Dear all, I finally found where all my memos that I did not find in the Voice Memos playlist went. They were in the Unknown Album folder of Unknown Artist, being m4a files that iTunes could not analyze. These files appear to be really corrupted, as n

  • Trying to call a method on an RMI server from a GUI

    Hi all, I'm new to the forums and I desperately need some help! My question fits into the RMI category but also the database/GUI side so sorry if this is posted in the wrong place. My application is a client/server system (programmed in Netbeans 6.8)

  • Cross Company - STO

    Hi All, I am facing a error in Cross Company - STO. After creating Purchase Order and releasing it on the vendor (which is a plant belonging to another Company Code), during PGI it is throwing an error, " Purchase Order 45......... does not contain i

  • PP HR scenario on Incentive payment

    Hi Gurus, One business scenario - My client wants confirmation be done thro job card which have Personnel name and ID. Suppose target is 100 pc and if the Personnel produces or confirmation against him done is 120 pcs. We can use CO11N and with Perso

  • Does the TM2 tablet mode need some buttons?

    TM2 is my first tablet and so far I love it. One of the reasons I wanted a tablet is because I spend a lot of time post processing photos using GIMP. It didn't occur to me before but now I have the device I realise there is no easy way to access the