Error while creating a Material

Hai Friends,
          I am facing a problem while creating,display,change material. i.e i am unable to create a new material or edit/display an existing material.
         The error is : Record ZP doesnot exist in table T113E.
         Message No: M3748
         But i could create a purchase order for an existing material.

I am not on SAP today, so I do not know for what table 113E is used.
go to SE16, enter T113* and hit F4, SAP will list all T113 tables and you can see its description.
This may help you to know about what field the error is talking.
I guess the ZP is somewhere on a view inyour material master, but the related entry was deleted from customizing table T113E. As SAP checks all field values when saving, you get this error,
Just open any view in your material master and find this ZP entry and relace it with a valid value then you can save without getting this error.
Finally you should use SE16 to find all materials having this ZP value and then replace it with MM17 mass maintenance

Similar Messages

Recieving ORA-01722 invalid number error while creating a materialized view

Hi,
I am receiving a ORA-01722 invalid number error while creating a materialized view. when run the select statement of the view i don't get any error, but when i use the same select statement to create a materialized view i receive this error. Could any please help in resolving this error. Here is the code i am using to create a materialized view.
CREATE MATERIALIZED VIEW MV_EBS_CH_CLOSED
REFRESH FORCE ON DEMAND
AS
SELECT DISTINCT kr.request_id, org.org_unit_name,
ebs_ch_ticket_type (kr.request_id) ticket_type,
DECODE
(kr.status_code,
'CLOSED_SUCCESS', kr.last_update_date,
'IN_PROGRESS', (SELECT MAX (start_time)
FROM ebs_ch_datastore ecd1
WHERE kr.request_id = ecd1.request_id
AND workflow_step_name =
'Final BA Review and Deployment Exit Criteria')
) closed_date,
substr(krhd.visible_parameter12,1,10) siebel_start_date,
kr.creation_date itg_start_date
FROM kcrt_requests kr,
kcrt_request_types krt,
kcrt_req_header_details krhd, kcrt_request_details krd1,
(SELECT koum.user_id user_id,
DECODE (koup.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
koup.org_unit_name
) org_unit_name
FROM krsc_org_unit_members koum, krsc_org_units koup
WHERE 1 = 1
AND 'Y' = koup.enabled_flag
AND koum.org_unit_id = koup.org_unit_id
AND EXISTS (
SELECT 'X'
FROM krsc_org_units kouc
WHERE koup.org_unit_id = kouc.org_unit_id
START WITH kouc.parent_org_unit_id =
ANY (SELECT org_unit_id
FROM krsc_org_units krsc_org_units1
WHERE 'Clearinghouse' =
org_unit_name)
CONNECT BY kouc.parent_org_unit_id =
PRIOR kouc.org_unit_id)
UNION
SELECT kou.manager_id user_id,
DECODE
(kou.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
kou.org_unit_name
) org_unit_name
FROM krsc_org_units kou
WHERE 'Y' = kou.enabled_flag
START WITH kou.parent_org_unit_id =
(SELECT org_unit_id
FROM krsc_org_units krsc_org_units2
WHERE 'Clearinghouse' = org_unit_name)
CONNECT BY kou.parent_org_unit_id = PRIOR kou.org_unit_id) org
WHERE krt.request_type_id = kr.request_type_id
AND krt.request_type_name IN ('Bug Fix', 'IT Enhancement')
and kr.REQUEST_ID = krd1.request_id
and krd1.batch_number = 1
AND kr.request_id = krhd.request_id
AND org.user_id in (krd1.parameter4, krd1.parameter5, krd1.parameter7)
AND ( 'CLOSED_SUCCESS' = kr.status_code
OR 'IN_PROGRESS' = kr.status_code
AND kr.request_id IN (
SELECT request_id
FROM (SELECT DISTINCT request_id,
MAX
(start_time)
closed_date
FROM ebs_ch_datastore
WHERE 'Final BA Review and Deployment Exit Criteria' =
workflow_step_name
GROUP BY request_id))
Thanks,
Shaik Mohiuddin

This error occurs when you try to create a materialized view , but if you run the sql the results are perfectly fine. Well it happend to me also and to fix this I made sure all the coulmns have the same data type which are used in joins or in where clause.
use
where
to_number(col1)=to_number(col2) and to_number(col3)=to_number(col4)
hope this helps..

Error while creating 2nd Material Receipt after reversal of 1st MR

Dear,
Facing an error while creating Material Receipt.
The gate entry of this material is 123456789.
The 1st MR was created on 10/02/2011 & no. was 12345 with Location ABC via Z T-code.
Under Quality this product was Rejected with Location XYZ.
Due to Material was Rejected in Quality this MR 12345 was reversed through MB01 which produced a Reversal number 67890.
Now the material is again on its original Location ABC.
Now when the user is again creating an MR on 17/03/2011 of this material present at ABC location via using Z T-code it is producing an error stating that M/R already processed against 123456789 gate entry.
We have done these several cases before also and there was no error shown when we created the 2nd MR for the same material after its reversal has been made.

Dear,
Problem solved.
The problem was in PO.
The person had unchecked the GR-basediv which caused the real trouble. The MR number was not appearing in MB03 & material was rejected in the QA11 so it was reversed through MB01.
When again the MR was being punched then it was stating that the "MR already processed for the Gate Entry."
PO was changed, Bill No. was changed by adding "A" & later deleting this "A" from Table level.

Error while creating a material using Bapi_material_savedata

Hi,
there is an error encountered while creating a material using BAPI_MATERIAL_SAVEDATA..
The Error description is " Material description is not transfered " even after supplying the Material description and other mandatory field information like industrial sector, material type ,basic view indicator,Base UOM,Base UOM ISO code.
Please let me know the solution, if you know.

Hi,
Please search the SCN for the answers
https://www.sdn.sap.com/irj/scn/advancedsearch?query=errorinBAPI_MATERIAL_SAVEDATA+&cat=sdn_all

ORA-00905: missing keyword error while creating a materialized view

Hi Gurus,
I am trying to create a materialized view as :
1 CREATE MATERIALIZED VIEW AMREG.ClientData
2 TABLESPACE AMREG_DATA
3 COMPRESS
4 PARALLEL
5 NOLOGGING
6 BUILD IMMEDIATE
7 REFRESH COMPLETE
8 ON DEMAND
9 DISABLE QUERY REWRITE
10 REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
11 AS
12 SELECT
13 CHILD.CLIENT_SGK "Child SGK",
14 CHILD.CLIENT_NAME "Child Name",
15 CHILD.ARC_ACCT_CD "Child ARC Acct Code",
16 ULTIMATE.CLIENT_SGK "Ultimate Parent SGK",
17 ULTIMATE.CLIENT_NAME "Ultimate Parent Name",
18 ULTIMATE.ARC_ACCT_CD "Ultimate ARC Acct Code",
19 HIER.LVL_FROM_ANCESTOR ,
20 FROM [email protected] CHILD,
21 [email protected] HIER,
22 [email protected] ULTIMATE
23 WHERE HIER.DESCENDANT_CLIENT_SGK = CHILD.CLIENT_SGK
24* AND ULTIMATE.CLIENT_SGK = HIER.ANCESTOR_CLIENT_SGK;
SQL> /
REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
ERROR at line 10:
ORA-00905: missing keyword
DBLink name is : DNYCPH60.WORLD
Please guide me on this and help to resolve the issue.

Ummm how about not posting the same question 4 times in 3 different forums?
Gints Plivna
http://www.gplivna.eu

Error while creating a material master (mm01)

hi,
I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
"Tables TCURM and T001W inconsistent; notify your system administrator" .
could any one draw some light on this.
thanks regards,
chinta

HI,
Before creation of plant 1st check in t.code:OMSA and see your plant assigned to field reference.
Check in t.code: OMSY, see your company code entry & active for material management.
Also check your plant is active for your material type in t.code: OMS2 with quantity & value updating.
###Check assignment of plant to company code in t.code: OX18 and see activation of your valuation are in t.code: OX14
Just cross check all material master customisation , refer link with t.codes:
Re: Material Master
Regards,
Biju K

Error while creatting the Material Master IDOC in ERP 2005

Hello All,
I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
Thanks for any kind of input.
Regards,
Rahul
Message was edited by:
Rahul Gavande

Dear,
Check ABAPer for file settings.
- CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
- CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
- CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
- CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
- CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
- CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
Check Note: 70752.
Regards,
Syed Hussain.

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Dumpp Error while creating material MM01

Hi,
While creating the material (mm01) i am getting dump error not allowing to save,
Message type: MESSAGE_TYPE_X_TEXT
I checked the PPO setting it is active for BP type.
Pls tell me how to solve this issue.
Thanks

Dear Rakesh,
Go to Tr. code. ST22 and analysis the cause
From initial its seems thatthere is a Text Field which might be mandatory and due to that syestem giving dump, Chek wth ur abaper

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Error while creating pourchase order

I am getting following error while creating PO
Account assignment mandatory for material 000000000000001335 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category.
Please help
Regards
Ranjeey

hi,
As you are mentioning Material Type is -HAWA
Hawa material will have Valuation class as -Trading material
If we have Not ticked -Value and Qty updating for the HAWA material type then eventhrough we maintain Accounting Views. -In configuration
We get the error as a account assignment cat mandatory.
Please maintain Qty and Value update Tick then you can create PO
with regards
Shrinivas gangoor

Error while creating PO in operation subcontracting

I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error while creating ASN in SNC

dear all,
We are tring to create an ASN against a PO in "Due list for purchasing documents" in SNC but getting the following errors, the material is invalid, ship from location is invalid and the customer location is invalid.
PO created in ECC and received in SNC. The PO acknowledgement was also received back in ECC but not able to post ASN from SNC to ECC.
Request to please let us know if we have missed out on some master data setting?
Thanks in advance.
mahesh.

Hi Mahesh
I am also getting the similar type of errors while creating ASN against planned receipts in SNC . I was trying to find for some help & saw this thread.
Just wondering if you managed to rectify the error & able to post the ASN? Will appreciate if you can share the resolution with me.
We are also on SNC 7.02.
Regards,
Tapan

Error while creating a Material

Similar Messages

Maybe you are looking for