Error while inserting XML data

Hi,
When I try to insert xml data, it gives the following error.
--CREATE TABLE XMLTABLE OF XMLType;
INSERT INTO XMLTABLE VALUES(XMLTYPE(getCLOBDocument('example.xml')));
ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
Any ideas?

I've updated the FAQ with the answer to this one..
XML DB FAQ

Similar Messages

Error while inserting xml data into table

Hello
I am running thid stored procedure and this compiles correctly , but when I try to execute it gives me a error, I have been trying this form the past 3 days , could anyone please help me ASAP
SQL> CREATE OR REPLACE PROCEDURE loadxml12 AS
2 fil BFILE;
3 buffer RAW(32767);
4 len INTEGER;
5 insrow INTEGER;
6 BEGIN
7 SELECT f_lob INTO fil FROM xml_temp12 WHERE key = 1;
8 DBMS_LOB.FILEOPEN(fil,DBMS_LOB.FILE_READONLY);
9 len := DBMS_LOB.GETLENGTH(fil);
10 DBMS_LOB.READ(fil,len,1,buffer);
11 xmlgen.resetOptions;
12 insrow := xmlgen.insertXML('xml_doc',UTL_RAW.CAST_TO_VARCHAR2(buffer));
13 DBMS_OUTPUT.PUT_LINE(insrow);
14 IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
15 DBMS_LOB.FILECLOSE(fil);
16 END IF;
17 EXCEPTION
18 WHEN OTHERS THEN
19 DBMS_OUTPUT.PUT_LINE('In Exception');
20 DBMS_OUTPUT.PUT_LINE(SQLERRM(SQLCODE));
21 IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
22 DBMS_LOB.FILECLOSE(fil);
23 END IF;
24 end;
25 /
Procedure created.
SQL> exec loadxml12
In Exception
BEGIN loadxml12; END;
ERROR at line 1:
ORA-20000: ORU-10028: line length overflow, limit of 255 bytes per line
ORA-06512: at "SYS.DBMS_OUTPUT", line 99
ORA-06512: at "SYS.DBMS_OUTPUT", line 65
ORA-06512: at "CARCLUB_RW2.LOADXML12", line 20
ORA-06512: at line 1
null

Could you explain what your procedure does, please. I also tried to compile it but always got error message:
PL/SQL: SQL Statement ignored
PLS-00385: type mismatch found at 'FIL' in SELECT...INTO
statement
SQL> CREATE OR REPLACE PROCEDURE loadxml12 AS
2 fil BFILE;
3 buffer RAW(32767);
4 len INTEGER;
5 insrow INTEGER;
6 BEGIN
7 SELECT f_lob INTO fil FROM xml_temp12 WHERE key = 1;
8 DBMS_LOB.FILEOPEN(fil,DBMS_LOB.FILE_READONLY);
9 len := DBMS_LOB.GETLENGTH(fil);
10 DBMS_LOB.READ(fil,len,1,buffer);
11 xmlgen.resetOptions;
12 insrow := xmlgen.insertXML('xml_doc',UTL_RAW.CAST_TO_VARCHAR2(buffer));
13 DBMS_OUTPUT.PUT_LINE(insrow);
14 IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
15 DBMS_LOB.FILECLOSE(fil);
16 END IF;
17 EXCEPTION
18 WHEN OTHERS THEN
19 DBMS_OUTPUT.PUT_LINE('In Exception');
20 DBMS_OUTPUT.PUT_LINE(SQLERRM(SQLCODE));
21 IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
22 DBMS_LOB.FILECLOSE(fil);
23 END IF;
24 end;
25 /
Bober
null

Error while inserting spatial data

Hi All,
I have a problem while inserting spatial data. could some one please help me in solving this.
I have creatd a table with spatial index.
INSERT INTO USER_SDO_GEOM_METADATA
          VALUES('SDO_CA_test', 'CA', SDO_DIM_ARRAY(
                MDSYS.SDO_DIM_ELEMENT ('LON', 71.19545, 120.35101, 0.000005),
                MDSYS.SDO_DIM_ELEMENT ('LAT', 12.1145, 26.58041, 0.000005)), 8687);
     CREATE INDEX IO_CA_test ON SDO_CAR_test(CA)
    INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('SDO_COMMIT_INTERVAL=10000 SDO_RTR_PCTFREE = 0');when I insert data from another spatail table that does not have a index I get an error.
insert into sdo_ca_test as select * from base_sdo;
ORA-29875 Failed in the ececution of the ODCINDEXINSERT routine
ORA-13354 incorrect offset in ELEM_INFO_ARRAY
ORA_06512 at MDSYS.SDO_INDEX_METHOD_101 line. 709I believe that there is some incorrect data that is not with my index defination.
How do I check this invalid data at base_sdo table. The base_sdo table has no index.
rgds
Saz
Edited by: Saaz Ena on Dec 21, 2009 6:16 PM

Can you try SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT
or SDO_GEOM.VALIDATE_LAYER_WITH_CONTEXT? e.g.
select * from base_sdo a where
SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(a.CA, 0.000005) != 'TRUE';

Error while running XML data definition

Hi,
Want to run report using XML Publisher, created one Data Definition using xml file,
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="EmpDT" description="Employee Details" Version="1.0">
<parameters>
<parameter name="p_DeptNo" dataType="character"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[ SELECT Empno, Ename,Job,Mgr,Hiredate,Deptno FROM Emp WHERE deptno = nvl(:p_DeptNo,deptno) ]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_EMP" source="Q1">
<element name="EMPLOYEE_NUMBER" value="Empno"/>
<element name="NAME" value="Ename"/>
<element name="JOB" value="Job"/>
<element name="MANAGER" value="Mgr"/>
<element name="HIREDATE" value="Hiredate"/>
<element name="DEPTNO" value="Deptno"/>
</group>
</dataStructure>
</dataTemplate>
Added concurrent program and trying to run request but it's getting completed with error, when i checked log file it was showing error like,
XDO Data Engine Version No: 5.6.3
Resp: 20420
Org ID : 204
Request ID: 5810677
All Parameters: p_Dept_No=20
Data Template Code: EMP_DET
Data Template Application Short Name: AMW
Debug Flag: N
{p_Dept_No=20}
Calling XDO Data Engine...
[042811_124713802][][EXCEPTION] java.lang.NullPointerException
     at oracle.apps.xdo.dataengine.DataTemplateParser.GetNodeNumChildren(DataTemplateParser.java:334)
     at oracle.apps.xdo.dataengine.DataTemplateParser.templateParser(DataTemplateParser.java:266)
     at oracle.apps.xdo.dataengine.XMLPGEN.setDataTemplate(XMLPGEN.java:140)
     at oracle.apps.xdo.dataengine.DataProcessor.setDataTemplate(DataProcessor.java:193)
     at oracle.apps.xdo.oa.util.DataTemplate.<init>(DataTemplate.java:231)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:283)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at com.sun.java.util.collections.ArrayList.RangeCheck(ArrayList.java:492)
     at com.sun.java.util.collections.ArrayList.get(ArrayList.java:306)
     at oracle.apps.xdo.dataengine.DataTemplateParser.getParentDataSource(DataTemplateParser.java:1796)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeDefaultGroup(XMLPGEN.java:331)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:286)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
     at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:334)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:294)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
can any one help me to solve this error? it's urgent.....
reply awaited..
Regards,
Priyanka.

HI,
We are facing some issue with CXML. I have posted a new thread [cXML with SAP PI;.
The content of that thread is pasted below: You can give your solution in the above mentioned thread so that I can grant points.
We need to use cXML for our project. Based on the thread ( [Error while uploading CXML data definition.; )
the following steps need to be done with the cXML DTD.
1.First Delete the Multiple Declaration of "Method .ANY"
2.replace all "ds:" character with 'ds_'
3.replace all "xades: " with 'xades_'
4.replace all "xmlns" with 'attr_'
5) After this use Altova to convert the DTD to XSD.
First of all, we could not carry out the 4th point, as in that case Altova says that it is invalid, and it fails to get imported in PI as well.
Without step 4 , if we import it as external definition, then there are certain attributes with type xml:lang coming in Red.
Can anybody tell us on how to fix this.
Thanks,
Himadri

Error while inserting xml into database

Hi,
I'm trying to use the sample application available on OTN site i.e. Simple Bulk Loader Sample Application which inserts a xml more than 4k in xmltype.
But I am getting this error while using it from JDeveloper
Here is the error :
XMLLoader: Uploaded File write to clob c:\temp\sampleXMLFiles\PPF.XML
XMLLoader: Uploaded File after setc:\temp\sampleXMLFiles\PPF.XML
java.sql.SQLException: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00229: input source is empty
Error at line 0
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)DBError.java:134
void oracle.jdbc.ttc7.TTIoer.processError()
Process exited with exit code 0.
Any ideas !!!
Thanks
-Rajeev

Hi,
Thanks for the reply.
Actually it all started with this error while runnning the code in Jdeveloper
SimpleBulkLoader.doBulkLoad- The system cannot find the path specified. IO:FileNotFound Exception
Then while debugging I thought its giving error because of writer.close( ); in one of the writeToClob API in BaseApplication.java. So I commented it and then started getting this error which I originally posted
java.sql.SQLException: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00229: input source is empty
Error at line 0
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
But now after I uncommented writer.close() and debugged the application again in JDeveloper, I see it reads the xml and keeps it in buffer properly but in the end it throws SQLException "No more data to read from socket" and in turn throws "The system cannot find the path specified. IO:FileNotFound Exception"
I have no idea what's going on ??
Thanks
-Rajeev

How to get ALL validate-errors while insert xml-file into xml_schema_table

How to get all validate-errors while using insert into xml_schema when having a xml-instance with more then one error inside ?
Hi,
I can validate a xml-file by using isSchemaValid() - function to get the validate-status 0 or 1 .
To get a error-output about the reason I do validate
the xml-file against xdb-schema, by insert it into schema_table.
When more than one validate-errors inside the xml-file,
the exception shows me the first error only.
How to get all errors at one time ?
regards
Norbert
... for example like this matter:
declare
     xmldoc CLOB;
     vStatus varchar
begin
-- ... create xmldoc by using DBMS_XMLGEN ...
-- validate by using insert ( I do not need insert ;-) )
     begin
     -- there is the xml_schema in xdb with defaultTable XML_SCHEMA_DEFAULT_TABLE
     insert into XML_SCHEMA_DEFAULT_TABLE values (xmltype(xmldoc) ) ;
     vStatus := 'XML-Instance is valid ' ;
     exception
     when others then
     -- it's only the first error while parsing the xml-file :
          vStatus := 'Instance is NOT valid: '||sqlerrm ;
          dbms_output.put_line( vStatus );
     end ;
end ;

If I am not mistaken, the you probably could google this one while using "Steven Feuerstein Validation" or such. I know I have seen a very decent validation / error handling from Steven about this.

Compiling Error While Viewing XML Data in Word

I received the following message, "Compile error in hidden module: Module_starter" while trying to load sample xml data to view within MS Word while using BI Publisher. Any ideas of what causes this and how to fix it would be greatly appreciated.
Thanks.
G. Wright

Getting this error as well.
I've read the announcement from Tim, and also the Metalink article: Note:457235.1
However, our desktops at work are locked down to such an extent that I don't have an 'all programs' entry on my start menu.
I tried what I thought might be the 'Template Builder for Word Language' executable but that also gave me an error (changeUILang.exe).
Error is: Runtime error '9'. Subscript out of range.
Could someone please confirm what the shortcut:
"All Programs --> Oracle BI Publisher Desktop --> Template Builder for Word Language "
actually points to.
As to the other option (uninstalling the security patch) this is just a non-starter where I work.
Thanks for your help,
Ben

Error at insert xml data

i follow the next steps:
1.- i create a schema "ficha.xsd"
<?xml version="1.0" encoding="UTF-8" ?>
- <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="ficha" type="fichaType" />
- <xsd:complexType name="fichaType">
- <xsd:sequence>
<xsd:element name="antecedentesPersonales" type="antecedentesPersonalesType" />
</xsd:sequence>
<xsd:attribute name="identificador" type="xsd:integer" />
</xsd:complexType>
- <xsd:complexType name="antecedentesPersonalesType">
- <xsd:sequence>
<xsd:element name="nombrePrincipal" type="xsd:string" />
<xsd:element name="nombreSecundario" type="xsd:string" />
<xsd:element name="apellidoPaterno" type="xsd:string" />
<xsd:element name="apellidoMaterno" type="xsd:string" />
<xsd:element name="genero" type="xsd:string" />
<xsd:element name="fechaNacimiento" type="xsd:string" />
<xsd:element name="direccionPersonal" type="xsd:string" />
<xsd:element name="ciudad" type="xsd:string" />
<xsd:element name="region" type="xsd:string" />
<xsd:element name="pais" type="xsd:string" />
</xsd:sequence>
<xsd:attribute name="rut" type="xsd:string" />
</xsd:complexType>
</xsd:schema>
2.- i register the schema in bd (before i load the schema to the BD by ftp to http://localhost:8080/home/OE/xsd)
begin
dbms_xmlschema.registerSchema(
'http://localhost:8080/home/OE/xsd/ficha.xsd',
xdbURIType('/home/OE/xsd/ficha.xsd').getClob(),
TRUE,TRUE,FALSE,TRUE
end;
3.- i created the table
CREATE TABLE XML1010 of XMLType
XMLSCHEMA "http://localhost:8080/home/OE/xsd/ficha.xsd"
ELEMENT "ficha";
4. create directory
create or replace directory PRUEBA1010
as 'C:\tamino\10_elementos\10_archivos';
5.insert data xml
INSERT INTO XML1010
VALUES
xmltype
bfilename('PRUEBA1010','0prueba.xml'),
nls_charset_id('AL32UTF8')
the error is : ORA-19007:Schema -does not match expected http://localhost:8080/home/OE/xsd/ficha.xsd
Whta i doing wrong?

You need to associated your XML Instance with the XML Schema. This can be done three ways at shown below
SQL>
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2    :schemaURL := 'http://localhost:8080/home/OE/xsd/ficha.xsd';
3    :schemaPath := '/home/SCOTT/ficha.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2    res boolean;
3    xmlSchema xmlType := xmlType(
4 '<?xml version="1.0" encoding="UTF-8"?>
5 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb">
6     <xsd:element name="ficha" type="fichaType" xdb:defaultTable="XML1010"/>
7     <xsd:complexType name="fichaType">
8             <xsd:sequence>
9                     <xsd:element name="antecedentesPersonales" type="antecedentesPersonalesType"/>
10             </xsd:sequence>
11             <xsd:attribute name="identificador" type="xsd:integer"/>
12     </xsd:complexType>
13     <xsd:complexType name="antecedentesPersonalesType">
14             <xsd:sequence>
15                     <xsd:element name="nombrePrincipal" type="xsd:string"/>
16                     <xsd:element name="nombreSecundario" type="xsd:string"/>
17                     <xsd:element name="apellidoPaterno" type="xsd:string"/>
18                     <xsd:element name="apellidoMaterno" type="xsd:string"/>
19                     <xsd:element name="genero" type="xsd:string"/>
20                     <xsd:element name="fechaNacimiento" type="xsd:string"/>
21                     <xsd:element name="direccionPersonal" type="xsd:string"/>
22                     <xsd:element name="ciudad" type="xsd:string"/>
23                     <xsd:element name="region" type="xsd:string"/>
24                     <xsd:element name="pais" type="xsd:string"/>
25             </xsd:sequence>
26             <xsd:attribute name="rut" type="xsd:string"/>
27     </xsd:complexType>
28 </xsd:schema>');
29 begin
30    if (dbms_xdb.existsResource(:schemaPath)) then
31      dbms_xdb.deleteResource(:schemaPath);
32    end if;
33    res := dbms_xdb.createResource(:schemaPath,xmlSchema);
34 end;
35 /
PL/SQL procedure successfully completed.
SQL> begin
2    dbms_xmlschema.registerSchema
3    (
4      :schemaURL,
5      xdbURIType(:schemaPath).getClob(),
6      TRUE,TRUE,FALSE,TRUE
7    );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> INSERT INTO XML1010 VALUES ( xmltype(
2 '<?xml version="1.0" encoding="UTF-8"?>
3 <ficha identificador="2">
4     <antecedentesPersonales rut="10000001">
5             <nombrePrincipal>Juan</nombrePrincipal>
6             <nombreSecundario>Jose</nombreSecundario>
7             <apellidoPaterno>Perez</apellidoPaterno>
8             <apellidoMaterno>Soto</apellidoMaterno>
9             <genero>M</genero>
10             <fechaNacimiento>15-11-1979</fechaNacimiento>
11             <direccionPersonal>Los Alarces s/n</direccionPersonal>
12             <ciudad>Valdivia</ciudad>
13             <region>10</region>
14             <pais>Chile</pais>
15     </antecedentesPersonales>
16 </ficha>',:schemaURL))
17 /
1 row created.
SQL> INSERT INTO XML1010 VALUES ( xmltype(
2 '<?xml version="1.0" encoding="UTF-8"?>
3 <ficha identificador="2">
4     <antecedentesPersonales rut="10000001">
5             <nombrePrincipal>Juan</nombrePrincipal>
6             <nombreSecundario>Jose</nombreSecundario>
7             <apellidoPaterno>Perez</apellidoPaterno>
8             <apellidoMaterno>Soto</apellidoMaterno>
9             <genero>M</genero>
10             <fechaNacimiento>15-11-1979</fechaNacimiento>
11             <direccionPersonal>Los Alarces s/n</direccionPersonal>
12             <ciudad>Valdivia</ciudad>
13             <region>10</region>
14             <pais>Chile</pais>
15     </antecedentesPersonales>
16 </ficha>').createSchemaBasedXML(:schemaURL))
17 /
1 row created.
SQL> INSERT INTO XML1010 VALUES ( xmltype(
2 '<?xml version="1.0" encoding="UTF-8"?>
3 <ficha identificador="2" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://localhost:8080/ho
me/OE/xsd/ficha.xsd">
4     <antecedentesPersonales rut="10000001">
5             <nombrePrincipal>Juan</nombrePrincipal>
6             <nombreSecundario>Jose</nombreSecundario>
7             <apellidoPaterno>Perez</apellidoPaterno>
8             <apellidoMaterno>Soto</apellidoMaterno>
9             <genero>M</genero>
10             <fechaNacimiento>15-11-1979</fechaNacimiento>
11             <direccionPersonal>Los Alarces s/n</direccionPersonal>
12             <ciudad>Valdivia</ciudad>
13             <region>10</region>
14             <pais>Chile</pais>
15     </antecedentesPersonales>
16 </ficha>'))
17 /
1 row created.
SQL>
SQL>
SQL>The first example explicitly passes the SchemaURL as the second argument to the XMLType constructor.
The second examples uses the createSchemaBasedXML() to create a Schema based XML type from a non schema based xmltype
Thre third uses the W3C specified XMLSchema-Instnace attributes to identify the XML schema the instance is associated with.

Getting error while creating XML data source

Hi,
I have converted access database into xml and now wants to convert the xml file into oracle database.while creating the xml database resource geting error ora-065550.PLS-00103:Encountered the symbol"Push" when expecting one of the following .(),*etc.
Why this problem I am facing.
Any Idea
Thanks in advace....

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while inserting attachements data into FND_LOBS

Hi,
I m trying to insert data into fnd_lobs using below, I didn't declare any variables for below.
I m getting many compilation erros for below insert, Could you let me know if i have to declare any of below values.
INSERT INTO fnd_lobs
           (file_id, file_name, file_content_type, upload_date,expiration_date, program_name, program_tag, file_data,LANGUAGE, oracle_charset, file_format)
    VALUES (l_media_id, l_filename,p_file_content_type,SYSDATE,NULL, 'FNDATTCH', NULL, EMPTY_BLOB (),'US', 'UTF8', 'binary')
           RETURNING file_data
           INTO x_blob;
-- Load the file into the database as a BLOB
    DBMS_LOB.OPEN (fils, DBMS_LOB.lob_readonly);
    DBMS_LOB.OPEN (x_blob, DBMS_LOB.lob_readwrite);
    DBMS_LOB.loadfromfile (x_blob, fils, blob_length);   -- Close handles to blob and file
    DBMS_LOB.CLOSE (x_blob);
    DBMS_LOB.CLOSE (fils);
Thanks.

Could you explain what your procedure does, please. I also tried to compile it but always got error message:
PL/SQL: SQL Statement ignored
PLS-00385: type mismatch found at 'FIL' in SELECT...INTO
statement
SQL> CREATE OR REPLACE PROCEDURE loadxml12 AS
2 fil BFILE;
3 buffer RAW(32767);
4 len INTEGER;
5 insrow INTEGER;
6 BEGIN
7 SELECT f_lob INTO fil FROM xml_temp12 WHERE key = 1;
8 DBMS_LOB.FILEOPEN(fil,DBMS_LOB.FILE_READONLY);
9 len := DBMS_LOB.GETLENGTH(fil);
10 DBMS_LOB.READ(fil,len,1,buffer);
11 xmlgen.resetOptions;
12 insrow := xmlgen.insertXML('xml_doc',UTL_RAW.CAST_TO_VARCHAR2(buffer));
13 DBMS_OUTPUT.PUT_LINE(insrow);
14 IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
15 DBMS_LOB.FILECLOSE(fil);
16 END IF;
17 EXCEPTION
18 WHEN OTHERS THEN
19 DBMS_OUTPUT.PUT_LINE('In Exception');
20 DBMS_OUTPUT.PUT_LINE(SQLERRM(SQLCODE));
21 IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
22 DBMS_LOB.FILECLOSE(fil);
23 END IF;
24 end;
25 /
Bober
null

BIP Trial 11.1.1..6: Error while generating XML data in Data Model

Hello,
I have created a Data Model with a single query. After saving the DM and clicking on the XML icon to generate sample data, I get the following error:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End tag 'span' does not match the start tag 'img'. Error processing resource 'http://localhost:7001/xmlpserver/servlet/xdo'...
*<table style='background=color: #d9e5ef; margin-top: 10px;' width='100%' cellspacing='0' cellpadding='0' border='0' summa...*
I have verified that the SQL runs without errors in SQL Developer using the same connection parameters as whats used in the DM.
There are no html tags/key-words etc being used in the sql our it's output.
Is there a a way to debug this? This is extremely frustrating. Especially since the same sql works without any issues in Oracle Reports.
Thanks,
Manish

ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

Getting Error in inserting the data in ADF

I am getting the below Error while inserting the data into Essbase in ADF:
<Error> <Net> <BEA-000902> <Duplicate expression found in the system property http.nonProxyHosts: localhost|localhost.localdomain|127.0.0.1|::1|sgajulap-in|sgajulap-in.>
Could you please give any solution to resolve this Error.
Thanks.
Swathi

check below links:
http://download.oracle.com/javase/6/docs/technotes/guides/net/proxies.html
http://www.rgagnon.com/javadetails/java-0085.html
// Get a system property
String dir = System.getProperty("user.dir");
// Set a system property
String previousValue = System.setProperty("application.property", "newValue");

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

ERROR WHILE INSERTING BLOBS AS PARAMETERS OF EXISTING STORED PROCEDURE

I have 2 simple tables to keep large application data (as XMLDOCUMENT in one table and BLOB in another):
SQL> desc bindata_tbl;
Name Null? Type
BDATA_ID NOT NULL NUMBER(10)
BDATA NOT NULL BLOB
SQL> desc metadata_tbl;
Name Null? Type
MDATA_ID NOT NULL NUMBER(10)
MDATA NOT NULL SYS.XMLTYPE
and stored preocedure to input new data into those tables:
"SP_TEST_BIN_META_DATA"
i_MetaData in METADATA_TBL.MDATA%TYPE,
i_BinData in BINDATA_TBL.BDATA%TYPE
as
begin
if i_MetaData is not null then
insert into METADATA_TBL (MDATA_ID, MDATA)
values (METADATA_SEQ.nextval, i_MetaData);
end if;
if i_BinData is not null then
insert into BINDATA_TBL (BDATA_ID, BDATA)
values (BINDATA_SEQ.nextval, i_BinData);
end if;
COMMIT;
-- Handle exceptions
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RAISE;
end;
I communicate with database from .Net application using "Oracle.DataAccess 10.1.0.200 (Runtime version v1.0.3705)" component.
Following procesure is a [simplified] examlple of the code I use, which demonstrates the errors while inserting XMLDOCUMENT and BLOB values simultaneously.
In my application those should be quite big objects (~200 K XML and ~5-25M binary image data), but following sample keeps failing even with very small-sized objects:
Line Number
1          private void PureTest()
2          {
3               OracleConnection conn = null;
4               OracleTransaction tx = null;
5               OracleCommand command = null;
6
7               try
8               {
9                    // Open connection
10                    string strConn = "Data Source=AthenaWf; User ID=AthenaWf; Password=Poseidon";
11                    conn = new OracleConnection( strConn );
12                    conn.Open();
13
14                    // Begin transaction (not sure if really needed)
15                    tx = conn.BeginTransaction();
16
17                    // Create command
18                    string strSql = "SP_TEST_BIN_META_DATA";
19                    command = new OracleCommand();
20                    command.Connection = conn;
21                    command.CommandText = strSql;
22                    command.CommandType = CommandType.StoredProcedure;
23
24                    // Create parameters
25                    // 1) XmlType parameter
26                    string strXml = "<?xml version=\"1.0\"?><configuration testValue=\"123456789\"/>";
27                    XmlDocument xmlDoc = new XmlDocument();
28                    xmlDoc.LoadXml( strXml );
29                    OracleXmlType oraXml = new OracleXmlType( conn, xmlDoc );
30                    //oraXml = null;
31                    //
32                    OracleParameter xmlPrm = new OracleParameter();
33                    xmlPrm.ParameterName = "i_MetaData";
34                    xmlPrm.Direction = ParameterDirection.Input;
35                    xmlPrm.OracleDbType = OracleDbType.XmlType;
36                    xmlPrm.Value = oraXml;
37                    command.Parameters.Add( xmlPrm );
38
39                    // 2) Blob type
40                    byte[] buf = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9};
41                    OracleBlob oraBlob = new OracleBlob( conn, true );
42                    //oraBlob.Write( buf, 0, buf.Length );
43                    oraBlob = null;
44                    //
45                    OracleParameter blobPrm = new OracleParameter();
46                    blobPrm.ParameterName = "i_BinData";
47                    blobPrm.Direction = ParameterDirection.Input;
48                    blobPrm.OracleDbType = OracleDbType.Blob;
49                    blobPrm.Value = oraBlob;
50                    command.Parameters.Add( blobPrm );
51
52
53                    // Execute command finally
54                    command.ExecuteNonQuery();
55                    tx.Commit();
56               }
57               catch( Exception ex )
58               {
59                    // Clean-up
60                    if( command != null )
61                    {
62                         command.Dispose();
63                    }
64                    if( tx != null )
65                    {
66                         tx.Dispose();
67                    }
68                    if( conn != null )
69                    {
70                         conn.Dispose();
71                    }
72
73                    // Display error message
74                    MessageBox.Show( ex.Message, "Error" );
75               }
76          }
If I try insert only XMLDOCUMENT object (lines 30, 42 are commented out, 43 IS NOT) - everything is OK.
If I try to insert only BLOB object (lines 30, 42 are NOT COMMENTED OUT, line 43 is commented out) - everything is OK again.
If I try to insert them both having some values (lines 30, 43 are commented out, 42 is not commented out) - it fails right on "command.ExecuteNonQuery();" (line 54)
with the following exception:
"ORA-21500: internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%]".
Even when I nullify oraBlob before assigning it to OracleParameter value (line 30 is commented out, line 42 and 43 are not) I have the same exception.
XMLDOCUMENT and DLOB data logically are very coupled objects (in my application), so I really want to insert them simultaneously in one stored procedure in transactional way.
Is it bug of drivers, server, .net environment, or I miss something in implementation?
PS. In some articles on Oracle web and in MSDN site I found a mention about necessity of wrapping all write/update operations in a transaction, while working with temporary LOBs. I use it here, but it does not look like changing anything.

Hello,
I tested your code with the 10.1.0.4.0 ODP and 10.1.0.4.0 Client and it worked fine.
Can you please apply the 10.1.0.4.0 patches for both ODP and client to see if this resolves the issue for you.
Here is the output from the same execution of the ODP application you provided as a testcase. These rows were inserted at the same time when I executed the application and passed the data as parameters to the SP you provided.
Results of Testing with 10.1.0.4.0
==========================
SQL> select count(*) from BINDATA_TBL
2 ;
COUNT(*)
1
SQL> select count(*) from METADATA_TBL;
COUNT(*)
1
SQL> select dbms_lob.getlength(bdata) from BINDATA_TBL;
DBMS_LOB.GETLENGTH(BDATA)
10
SQL> select mdata from METADATA_TBL;
MDATA
<?xml version="1.0"?><configuration testValue="123456789" />

Error while uploading .xml file for Customer/Vendor List for Italy

Hi All,
We are facing problem while uploading the .xml file in DMEE transaction for the new Customer/Vendor List for Italy.
We have followed the entire process given in the OSS Note(1090857).
We have SAP 4.6c and followed the below steps:
1. Created ID-FI-IT Development class
2. Added domains
3. Added Data elements
4. Tried to upload the given .xml file and got any error saying ".xml file could not be interpreted".
Also there is a .SAR file mentioned to upload if we receive any errors while uploading .xml file.
Tried uploading the .SAR file also. STill we are recieving the same Error.
Can any one of you help us out.
Thanks in Advance.
Ramesh

Ok, we upload .SAR file in this way:
1. unpack .SAR file with SAPCAR.EXE program. Yuo obtain 2 files
R492445.P9C and K492445.P9C
2. put K492445.P9C in directory \SAPMNT\TRANS\COFILES and put R492445.P9C in directory \SAPMNT\TRANS\DATA of your system (DEV, TST or PRD)
3. Use Tx STMS. If You want create DMEE tree in DEV system, go to DEV import queue. Choose menu Extras | Other requests | Add. Insert P9CK492445 in Transp. request field.
4. Import the request. This creates the DMEE tree. You don't need ti upload XML file after. You can see the DMEE tree created with Tx DMEE and inserting
Tree type UMS1
Format tree IT_CUST_VEN_LIST
5. after continue follow the note
I hope this help you
Roberto

Error while inserting XML data

Similar Messages

Maybe you are looking for