Error while loading data through s614

Hi
When I am trying to load data from structure s614..I am getting the Below error..
I have gone through Transact.RFC..there i found that for ALEREMOTE..function module 'RSAR_TRFC_DATA_RECEIVED'..time limit exceeded..
and also found that job was finished in the source system..
Can any one give some suggestion for this...and also i have a doubt..my client is having table s614 and structure 2lis_01_s614..do i need to run set up to extract data from this table..if it is so,how should i approach......
Thanks
Teja
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.

Hi,
I have a similary problem.
Have you help me??

Similar Messages

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error while loading data through flat files

Hi,
I am laoding data through flat files
I loaded the data in development & then transported it to Quality system for doing Integration testing & loaded the data in Quality system & data loading was successful
But we do the regression testing in one more Quality system where the objects get transported from Quality system ,here when I try to the load the data to any of the cube in this system I am getting the following error
Error 'The argument 'US' cannot be interpreted as a number' on assignment field /BIC/ZIFBCOCTR record 1 value US
Generally we get this error when there is the data of one field is going to the other field
But one thing I am unable to understand is it was working fine in the Quality system and all the objects got transported from Quality to Regression testing system
Could any one help me out
Thanks
Maya

Hi,
Can you please cross check the file structure and the transfer structure.
Cheers,
Malli....

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data into hierarchy

Hi,
I tried loading the master data from flat file into a hierarchy but its giving me an error message as invalid entry and says hierarchy doesn't exist.Could anyone please guide me how to proceed.
Thanks,
Kuldeep.

Hi,
1. create a hierarchy, go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc.
2. Assuming it is a flat file load in csv format,selct upload method as IDOC,after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab
This will hopefully solve your problem.
Kind Regards,
Ray

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

Error while loading data to ODS in BI7

Getting such following errors when loading data to ODS through DTP(Data Transfer Process) in BI7.
Runtime error while executing rule -> see long text RSTRAN
Record filtered because records with the same key contain errors     RSM2
and many so on...
source system is ok no problem with the connection part.
plz help.

Hi Anup.
Probably your records are not Unique, while you have told the system they should be.
Try to move a discrimination characteristic from data fileds to key fileds.
Or
Try to set the "duplicate reords allowed" setting in your datasource (tab "General Settings" Delivery of Duplicate Data Recs. = Allowed)
Udo

Error while loading data into application

I have created new application successfully.
Loaded LCM backup successfully.
Imported all the rules successfully.
While loading data in plan1 through Essbase Administrator Services. i got this error:
"Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
There were errors, look in D:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\client\dataload.err
Database import completed ['hyplive6'.'Plan1']
Output columns prepared: [0]"
This file shows "D:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\client\dataload.err"
\\ Member No Period Not Found In Database
"BegBalance" "Jan" "Feb" "Mar" "Apr" "May" "Jun" "Jul" "Aug" "Sep" "Oct" "Nov" "Dec" "No Period" "MTD AVERAGE" "JAN MTD" "FEB MTD" "MAR MTD" "APR MTD" "MAY MTD" "JUN MTD" "JUL MTD" "AUG MTD" "SEP MTD" "OCT MTD" "NOV MTD" "DEC MTD"
I have little clue and new at this hyperion and stuff.
Any help will be appreciated.
Regards

Member No Period Not Found In Database
"BegBalance" "Jan" "Feb" "Mar" "Apr" "May" "Jun" "Jul" "Aug" "Sep" "Oct" "Nov" "Dec" "No Period" "MTD AVERAGE" "JAN MTD" "FEB MTD" "MAR MTD" "APR MTD" "MAY MTD" "JUN MTD" "JUL MTD" "AUG MTD" "SEP MTD" "OCT MTD" "NOV MTD" "DEC MTD"
check your period dimension

Error while loading data into Customers InfoCube

Hi All,
I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
The error I am receiving is "LIS Updating is Still Active".
I am also receiving error similar to "The data is being edited at the time of loading the data request".
Does anybody have encountered such a situation...
Please help me out.
Regards
YJ

Hi Dinesh and Paolo,
The links are very useful.
I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
Regards
YJ

Runtime error while loading data into infocube

Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
Sathesh

Hi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani

Error while loading data through s614

Similar Messages

Maybe you are looking for