Error while runing standard SRS program

Hi all,
I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
Spawned Process 24209
REP-1419: 'beforereport': PL/SQL program aborted.
And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
Thanks in advance
Goutham

the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
==========================
==========================
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
LOG :
Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
ERR REP-1419: 'beforereport': PL/SQL program aborted.
is anyone got solution and can anybody get me out of this situation
thanks in advance
regards
anwer

Similar Messages

  • Error while runing standard SRS concurrent program

    Hi all,
    I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
    Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
    Spawned Process 24209
    REP-1419: 'beforereport': PL/SQL program aborted.
    And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
    And Can any body suggest good document for writing interface program
    Thanks in advance
    Goutham
    Message was edited by:
    goutham konduru

    the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
    ==========================
    ==========================
    P_WHAT_TO_IMPORT='ALL'
    P_COMMIT_SIZE='1000'
    P_PRINT_EXCEPTIONS='Y'
    P_DEBUG_SWITCH='Y'
    P_TRACE_SWITCH='Y'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    LOG :
    Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
    Logged onto server:
    Username:
    LOG :
    Logged onto server:
    Username: APPS
    MSG MSG-00001: After SRWINIT
    MSG MSG-00002: After Get_Company_Name
    MSG MSG-00003: After Get_NLS_Strings
    ERR REP-1419: 'beforereport': PL/SQL program aborted.
    is anyone got solution and can anybody get me out of this situation
    thanks in advance
    regards
    anwer

  • Error while running a Java Program

    Can anyone help me,
    I am getting the following error while running a Java program, Below is the exception thrown, please help.
    java.nio.BufferOverflowException
    at java.nio.Buffer.nextPutIndex(Buffer.java:425)
    at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
    at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
    at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
    at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
    at org.jetel.graph.Edge.writeRecord(Edge.java:288)
    at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
    java.nio.BufferOverflowException
    at java.nio.Buffer.nextPutIndex(Buffer.java:425)
    at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
    at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
    at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
    at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
    at org.jetel.graph.Edge.writeRecord(Edge.java:288)
    at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

    Ok, let's see. Write the following class:
    public class Grunt {
      public static void main(String[] args) {
        System.out.println("Hello Mars");
    }Save it as "C:\Grunt.java", compile by typing:
    javac c:\Grunt.javaRun by typing:
    java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
    Regards

  • Error while registering the Concurrent Program

    Hi,
    I am getting the following error while registering the concurrent program.
    The executable is registered as shell script and this executable sends a mail with attachment. can any one of you tell me the cause of the error?
    ORA-20160: ORACLE error -4091 in SUBMIT: others
    Cause: SUBMIT: others failed due to ORA-04091: table APPLSYS.FND_CONCURRENT_PROGRAMS is mutating, trigger/function may not see it.
    The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
    ORA-06512: at "APPS.ALR_FND_CONCURRENT_PROGRAM_IAR", line 1
    ORA-04088: error during execution of trigger 'APPS.ALR_FND_CONCURRENT_PROGRAM_IAR'
    ORA-06512: at "APPS.FND_CONCURRENT_PROGRAMS_PKG", line 63
    FRM-40735: ON-INSERT trigger raised unhandled exception ORA-20160.
    Thanks in advance

    Check Note: 391795.1 - Frm-40735: On-Insert Trigger Raised Unhandled Exception Ora-04062 in APPS.FND_CONCURRENT_PROGRAMS_PKG
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391795.1

  • Dump error while executing this unicode program.....

    Hi,
         I got a program for 'Production Order Quantity Change Daily Checklist' ,but while executing i got the dump error from the following program stating tat,
      The current statement is only defined for character-type data objects.
    Error in the ABAP Application Program
    The current ABAP program "ZPROD" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    For the statement
       "READ DATASET ... INTO f"
    only character-type data objects are supported at the argument position
    "f".
    In this case. the operand "f" has the non-character-type "u". The
    current program is a Unicode program. In the Unicode context, the type
    'X' or structures containing not only character-type components are
    regarded as non-character-type.
    Program:
    REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
                    LINE-COUNT 058(001).
    TABLES: AUFK,  "Order master data
            AFKO,  "Order header data PP orders
            RESB,  "Reservation/dependent requirements
            MAST,  "Material to BOM Link
            STKO,  "BOM Header
            STPO.  "BOM item
    DATA: BEGIN OF WA,
             AUART      TYPE AUFK-AUART,
             AUFNR      TYPE AUFK-AUFNR,
             AEDAT      TYPE AUFK-AEDAT,
             AENAM      TYPE AUFK-AENAM,
             WERKS      TYPE AUFK-WERKS,
             PLNBEZ     TYPE AFKO-PLNBEZ,
             GAMNG      TYPE AFKO-GAMNG,
             GASMG      TYPE AFKO-GASMG,
             MATNR      TYPE RESB-MATNR,
             POSNR      TYPE RESB-POSNR,
             BDMNG      TYPE RESB-BDMNG,
             BMENG      TYPE STKO-BMENG,
             MENGE      TYPE STPO-MENGE,
          END OF WA,
          ITAB  LIKE SORTED   TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
    DATA: BEGIN OF ITAB2 OCCURS 0.
          INCLUDE STRUCTURE WA.
    DATA: END OF ITAB2.
    DATA: BEGIN OF ITAB_AUFK OCCURS 0,
          AUART  LIKE AUFK-AUART,
          AUFNR  LIKE AUFK-AUFNR,
          POSNR  LIKE RESB-POSNR,
          AEDAT  LIKE AUFK-AEDAT,
          AENAM  LIKE AUFK-AENAM,
          WERKS  LIKE AUFK-WERKS,
          PLNBEZ LIKE AFKO-PLNBEZ,
          GAMNG(7) TYPE P DECIMALS 0,
          GASMG(7) TYPE P DECIMALS 0,
          MATNR  LIKE RESB-MATNR,
          BDMNG(7) TYPE P DECIMALS 0,
          BMENG(7) TYPE P DECIMALS 0,
          MENGE(7) TYPE P DECIMALS 3.
    DATA: END OF ITAB_AUFK.
    DATA: FDATE LIKE SY-DATUM,
          LDATE LIKE SY-DATUM.
    DATA: X_AUFNR LIKE AFKO-AUFNR,
          X_MENGE(7) TYPE P DECIMALS 0,
          X_ERR(3).
    DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
    SELECT-OPTIONS T_WERKS  FOR  AUFK-WERKS OBLIGATORY.
    SELECT-OPTIONS T_AUFNR  FOR  AUFK-AUFNR.
    SELECT-OPTIONS T_AEDAT  FOR  AUFK-AEDAT.
    PARAMETERS     PDATA    LIKE W_DATASET1.
    CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
    PERFORM F_COLLECT_DATA.
    FORM F_COLLECT_DATA.
    OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
      DO.
         IF sy-subrc <> 0.
            EXIT.
         ENDIF.
         READ DATASET W_DATASET1 INTO WA.
         APPEND WA TO ITAB2.
      ENDDO.
    CLOSE DATASET W_DATASET1.
    SELECT  AAUFNR  AAUART AAEDAT AAENAM A~WERKS
            BPLNBEZ BGAMNG B~GASMG
            CMATNR  CBDMNG C~POSNR
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM          ( AUFK AS A
              INNER JOIN AFKO AS B ON BAUFNR  = AAUFNR
              INNER JOIN RESB AS C ON CAUFNR  = AAUFNR )
         WHERE A~AEDAT IN T_AEDAT
           AND A~WERKS IN T_WERKS.
         LOOP AT ITAB INTO WA.
            CLEAR MAST.
            SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
                                        AND WERKS = WA-WERKS.
            CLEAR STKO.
            SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
                                        AND STLAL = MAST-STLAL.
            CLEAR STPO.
            SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
                                        AND POSNR = WA-POSNR.
            WA-BMENG = STKO-BMENG.
            WA-MENGE = STPO-MENGE.
            MODIFY ITAB FROM WA.
            AT NEW AUFNR.
               SKIP.
            ENDAT.
            LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
                            AND POSNR = WA-POSNR.
                IF ITAB2-GAMNG <> WA-GAMNG OR
                   ITAB2-GASMG <> WA-GASMG OR
                   ITAB2-BDMNG <> WA-BDMNG.
                   CLEAR X_MENGE.
                   IF ITAB2-BMENG <> 0.
                      X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
                   ENDIF.
                   CLEAR X_ERR.
                   IF ITAB2-BDMNG <> X_MENGE.
                      X_ERR = 'Err'.
                   ENDIF.
                   FORMAT COLOR COL_TOTAL.
                   WRITE: / ITAB2-AUART  UNDER 'Type',
                            ITAB2-AUFNR  UNDER 'Prod Order',
                            ITAB2-AEDAT  UNDER 'Last Chg Dt',
                            ITAB2-AENAM  UNDER 'Last Chg by',
                            ITAB2-WERKS  UNDER 'Plant',
                            ITAB2-PLNBEZ UNDER 'Material',
                       (10) ITAB2-GAMNG  UNDER 'Order Qty' DECIMALS 0,
                       (10) ITAB2-GASMG  UNDER 'Scrap Qty' DECIMALS 0,
                            ITAB2-POSNR  UNDER 'Item',
                            ITAB2-MATNR  UNDER 'Component Req',
                       (10) ITAB2-BDMNG  UNDER 'Req Qty' DECIMALS 0,
                            X_MENGE      UNDER 'BOM Qty' COLOR COL_TOTAL,
                            ITAB2-BMENG  UNDER 'BOM Base',
                            ITAB2-MENGE  UNDER 'BOM Comp',
                            X_ERR        UNDER 'Rmks' COLOR COL_TOTAL.
                   CLEAR X_MENGE.
                   IF WA-BMENG <> 0.
                      X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
                   ENDIF.
                   CLEAR X_ERR.
                   IF WA-BDMNG <> X_MENGE.
                      X_ERR = 'Err'.
                   ENDIF.
                   FORMAT COLOR OFF.
                   WRITE: / WA-AUART  UNDER 'Type',
                            WA-AUFNR  UNDER 'Prod Order',
                            WA-AEDAT  UNDER 'Last Chg Dt',
                            WA-AENAM  UNDER 'Last Chg by',
                            WA-WERKS  UNDER 'Plant',
                            WA-PLNBEZ UNDER 'Material',
                       (10) WA-GAMNG  UNDER 'Order Qty' DECIMALS 0,
                       (10) WA-GASMG  UNDER 'Scrap Qty' DECIMALS 0,
                            WA-POSNR  UNDER 'Item',
                            WA-MATNR  UNDER 'Component Req',
                       (10) WA-BDMNG  UNDER 'Req Qty' DECIMALS 0,
                            X_MENGE   UNDER 'BOM Qty' COLOR COL_TOTAL,
                            WA-BMENG  UNDER 'BOM Base',
                            WA-MENGE  UNDER 'BOM Comp',
                            X_ERR     UNDER 'Rmks' COLOR COL_TOTAL.
                 ENDIF.
            ENDLOOP.
         ENDLOOP.
       LOOP AT ITAB2.
            LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
                                   AND POSNR = ITAB2-POSNR.
                 DELETE ITAB2.
            ENDLOOP.
            SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
            IF SY-SUBRC <> 0.
                 DELETE ITAB2.
            ENDIF.
       ENDLOOP.
       OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
            LOOP AT ITAB  INTO WA.
               TRANSFER WA TO W_DATASET1.
            ENDLOOP.
            LOOP AT ITAB2 INTO WA.
               TRANSFER WA TO W_DATASET1.
            ENDLOOP.
       CLOSE DATASET W_DATASET1.
    ENDFORM.
    TOP-OF-PAGE.
        FORMAT COLOR COL_TOTAL.
        WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
             50 'Daily Qty Changed Checklist for Production Order',
            120 SY-PAGNO.
        SKIP.
        WRITE: / 'Plant ', T_WERKS-LOW.
        WRITE:   ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
        SKIP.
        WRITE: /1  'Type',
                6  'Prod Order',
                17 'Last Chg Dt',
                29 'Last Chg by',
                42 'Plant',
                49 'Material',
                69 'Order Qty',
                83 'Scrap Qty',
                99 'Item',
               105 'Component Req',
               121 'Req Qty',
               135 'BOM Qty',
               149 'BOM Base',
               163 'BOM Comp',
               178 'Rmks'.
         ULINE.
         WRITE: / 'Previous data :- '.
         FORMAT COLOR OFF.
         WRITE: / 'Current data :- '.
    INITIALIZATION.
       LDATE = SY-DATUM.
       LDATE  = LDATE - 1.
       FDATE = LDATE.
       MOVE:   FDATE         TO  T_AEDAT-LOW.
       APPEND T_AEDAT.
       PDATA = 'AE001'.
    So,give me any suggestions where to customize r do rectify the error.This will be useful for me.
    Advance Thnx..

    *REPORT  ZPROD.
    REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
                    LINE-COUNT 058(001).
    TABLES: AUFK,  "Order master data
            AFKO,  "Order header data PP orders
            RESB,  "Reservation/dependent requirements
            MAST,  "Material to BOM Link
            STKO,  "BOM Header
            STPO.  "BOM item
    DATA: BEGIN OF WA,
             AUART      TYPE AUFK-AUART,
             AUFNR      TYPE AUFK-AUFNR,
             AEDAT      TYPE AUFK-AEDAT,
             AENAM      TYPE AUFK-AENAM,
             WERKS      TYPE AUFK-WERKS,
             PLNBEZ     TYPE AFKO-PLNBEZ,
             GAMNG      TYPE AFKO-GAMNG,
             GASMG      TYPE AFKO-GASMG,
             MATNR      TYPE RESB-MATNR,
             POSNR      TYPE RESB-POSNR,
             BDMNG      TYPE RESB-BDMNG,
             BMENG      TYPE STKO-BMENG,
             MENGE      TYPE STPO-MENGE,
          END OF WA,
          ITAB  LIKE SORTED   TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
    DATA: BEGIN OF ITAB2 OCCURS 0.
          INCLUDE STRUCTURE WA.
    DATA: END OF ITAB2.
    DATA: BEGIN OF ITAB_AUFK OCCURS 0,
          AUART  LIKE AUFK-AUART,
          AUFNR  LIKE AUFK-AUFNR,
          POSNR  LIKE RESB-POSNR,
          AEDAT  LIKE AUFK-AEDAT,
          AENAM  LIKE AUFK-AENAM,
          WERKS  LIKE AUFK-WERKS,
          PLNBEZ LIKE AFKO-PLNBEZ,
          GAMNG(7) TYPE P DECIMALS 0,
          GASMG(7) TYPE P DECIMALS 0,
          MATNR  LIKE RESB-MATNR,
          BDMNG(7) TYPE P DECIMALS 0,
          BMENG(7) TYPE P DECIMALS 0,
          MENGE(7) TYPE P DECIMALS 3.
    DATA: END OF ITAB_AUFK.
    DATA: FDATE LIKE SY-DATUM,
          LDATE LIKE SY-DATUM.
    DATA: X_AUFNR LIKE AFKO-AUFNR,
          X_MENGE(7) TYPE P DECIMALS 0,
          X_ERR(3).
    DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
    SELECT-OPTIONS T_WERKS  FOR  AUFK-WERKS OBLIGATORY.
    SELECT-OPTIONS T_AUFNR  FOR  AUFK-AUFNR.
    SELECT-OPTIONS T_AEDAT  FOR  AUFK-AEDAT.
    PARAMETERS     PDATA    LIKE W_DATASET1.
    CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
    PERFORM F_COLLECT_DATA.
    FORM F_COLLECT_DATA.
    OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
      DO.
         IF sy-subrc <> 0.
            EXIT.
         ENDIF.
         READ DATASET W_DATASET1 INTO WA.
         APPEND WA TO ITAB2.
      ENDDO.
    CLOSE DATASET W_DATASET1.
    SELECT  AAUFNR  AAUART AAEDAT AAENAM A~WERKS
            BPLNBEZ BGAMNG B~GASMG
            CMATNR  CBDMNG C~POSNR
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM          ( AUFK AS A
              INNER JOIN AFKO AS B ON BAUFNR  = AAUFNR
              INNER JOIN RESB AS C ON CAUFNR  = AAUFNR )
         WHERE A~AEDAT IN T_AEDAT
           AND A~WERKS IN T_WERKS.
         LOOP AT ITAB INTO WA.
            CLEAR MAST.
            SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
                                        AND WERKS = WA-WERKS.
            CLEAR STKO.
            SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
                                        AND STLAL = MAST-STLAL.
            CLEAR STPO.
            SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
                                        AND POSNR = WA-POSNR.
            WA-BMENG = STKO-BMENG.
            WA-MENGE = STPO-MENGE.
            MODIFY ITAB FROM WA.
            AT NEW AUFNR.
               SKIP.
            ENDAT.
            LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
                            AND POSNR = WA-POSNR.
                IF ITAB2-GAMNG <> WA-GAMNG OR
                   ITAB2-GASMG <> WA-GASMG OR
                   ITAB2-BDMNG <> WA-BDMNG.
                   CLEAR X_MENGE.
                   IF ITAB2-BMENG <> 0.
                      X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
                   ENDIF.
                   CLEAR X_ERR.
                   IF ITAB2-BDMNG <> X_MENGE.
                      X_ERR = 'Err'.
                   ENDIF.
                   FORMAT COLOR COL_TOTAL.
                   WRITE: / ITAB2-AUART  UNDER 'Type',
                            ITAB2-AUFNR  UNDER 'Prod Order',
                            ITAB2-AEDAT  UNDER 'Last Chg Dt',
                            ITAB2-AENAM  UNDER 'Last Chg by',
                            ITAB2-WERKS  UNDER 'Plant',
                            ITAB2-PLNBEZ UNDER 'Material',
                       (10) ITAB2-GAMNG  UNDER 'Order Qty' DECIMALS 0,
                       (10) ITAB2-GASMG  UNDER 'Scrap Qty' DECIMALS 0,
                            ITAB2-POSNR  UNDER 'Item',
                            ITAB2-MATNR  UNDER 'Component Req',
                       (10) ITAB2-BDMNG  UNDER 'Req Qty' DECIMALS 0,
                            X_MENGE      UNDER 'BOM Qty' COLOR COL_TOTAL,
                            ITAB2-BMENG  UNDER 'BOM Base',
                            ITAB2-MENGE  UNDER 'BOM Comp',
                            X_ERR        UNDER 'Rmks' COLOR COL_TOTAL.
                   CLEAR X_MENGE.
                   IF WA-BMENG <> 0.
                      X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
                   ENDIF.
                   CLEAR X_ERR.
                   IF WA-BDMNG <> X_MENGE.
                      X_ERR = 'Err'.
                   ENDIF.
                   FORMAT COLOR OFF.
                   WRITE: / WA-AUART  UNDER 'Type',
                            WA-AUFNR  UNDER 'Prod Order',
                            WA-AEDAT  UNDER 'Last Chg Dt',
                            WA-AENAM  UNDER 'Last Chg by',
                            WA-WERKS  UNDER 'Plant',
                            WA-PLNBEZ UNDER 'Material',
                       (10) WA-GAMNG  UNDER 'Order Qty' DECIMALS 0,
                       (10) WA-GASMG  UNDER 'Scrap Qty' DECIMALS 0,
                            WA-POSNR  UNDER 'Item',
                            WA-MATNR  UNDER 'Component Req',
                       (10) WA-BDMNG  UNDER 'Req Qty' DECIMALS 0,
                            X_MENGE   UNDER 'BOM Qty' COLOR COL_TOTAL,
                            WA-BMENG  UNDER 'BOM Base',
                            WA-MENGE  UNDER 'BOM Comp',
                            X_ERR     UNDER 'Rmks' COLOR COL_TOTAL.
                 ENDIF.
            ENDLOOP.
         ENDLOOP.
       LOOP AT ITAB2.
            LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
                                   AND POSNR = ITAB2-POSNR.
                 DELETE ITAB2.
            ENDLOOP.
            SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
            IF SY-SUBRC <> 0.
                 DELETE ITAB2.
            ENDIF.
       ENDLOOP.
       OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
            LOOP AT ITAB  INTO WA.
               TRANSFER WA TO W_DATASET1.
            ENDLOOP.
            LOOP AT ITAB2 INTO WA.
               TRANSFER WA TO W_DATASET1.
            ENDLOOP.
       CLOSE DATASET W_DATASET1.
    ENDFORM.
    TOP-OF-PAGE.
        FORMAT COLOR COL_TOTAL.
        WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
             50 'Daily Qty Changed Checklist for Production Order',
            120 SY-PAGNO.
        SKIP.
        WRITE: / 'Plant ', T_WERKS-LOW.
        WRITE:   ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
        SKIP.
        WRITE: /1  'Type',
                6  'Prod Order',
                17 'Last Chg Dt',
                29 'Last Chg by',
                42 'Plant',
                49 'Material',
                69 'Order Qty',
                83 'Scrap Qty',
                99 'Item',
               105 'Component Req',
               121 'Req Qty',
               135 'BOM Qty',
               149 'BOM Base',
               163 'BOM Comp',
               178 'Rmks'.
         ULINE.
         WRITE: / 'Previous data :- '.
         FORMAT COLOR OFF.
         WRITE: / 'Current data :- '.
    INITIALIZATION.
       LDATE = SY-DATUM.
       LDATE  = LDATE - 1.
       FDATE = LDATE.
       MOVE:   FDATE         TO  T_AEDAT-LOW.
       APPEND T_AEDAT.
       PDATA = 'AE001'.

  • Error while transporting standard cube

    Hi
    We are facing errors while transporting a standard cube and all relevant objects.
    While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
    If we ignore and transport the same, transformations es are not being transported.
    How to resolve this., please provide inputs.
    regards
    Lavanya

    Hi Lavanya
    The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
    This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
    Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
    Cheers
    Umesh

  • Error while running background deployment, program /SAPAPO/RMSDPDEP

    Hi all,
    For the second time in 3 months, I encounter this strange error while running a daily background deployment job, using program /SAPAPO/RMSDPDEP.
    The job starts correctly and does a part of its job, but then interrupt with this message in the job log :
      -->  "no valid simulation guid"  (class SAPAPO/OM_TS, n° 101)
      -->  "Unknown error"  (class SAPAPO/OM, n° 100)
      -->  "Job cancelled  after system exception ERROR_MESSAGE"  (class 00, n° 564)
    I just can't find any clue about what causes the problem...
    Did anyone encounter that kind of difficulties before ? Any help would be usefull...
    Thanks !
    Fabrice

    Hi Siva,
    In this range of time, I effectively run 13 parallel deployment jobs, as follow :
    n° 1, 2, 3, 4 and 5 : same location (factory 1) and each treats a products selection
    n° 6, 7, 8, 9 and 10 : same location (factory 2) and each treats a products selection
    n° 11 : all products of factory 3
    n° 12 : all products of factory 4
    n° 13 : all products of factory 5
    A product can only be produced in a single location, so there might not have access concurencies during parallel jobs. Do you think it could be some kind of a technical problem (not enough process available ?). Note that the problem can't come from CPU, we use CPU auto-allocation, and it works well.
    What do you think ?
    Thanks
    Fabrice

  • Error: While downloading the concurrent program

    I am trying to download the concurrent program using FNDLOAD command and I getting the error.
    Can anyone help me to resolve this
    FNDLOAD Command >
    FNDLOAD apps/PASSWORD@RTCDV1 O Y DOWNLOAD $FND_TOP/patch/115/import/afcpprog.lct XXAR3006_PROCA_CP.ldt PROGRAM CONCURRENT_PROGRAM_NAME="XXAR3006_HOSTA"
    ERROR Message
    APP-FND-01564: ORACLE error 12154 in AFPCOA
    Cause: AFPCOA failed due to Error while trying to retrieve text for error ORA-12154
    The SQL statement being executed at the time of the error was: and was executed from the file .
    Thanks in advance..
    Regards
    BS

    Hi,
    FNDLOAD apps/PASSWORD@RTCDV1 O Y DOWNLOAD $FND_TOP/patch/115/import/afcpprog.lct XXAR3006_PROCA_CP.ldt PROGRAM CONCURRENT_PROGRAM_NAME="XXAR3006_HOSTA"Try this syntax and see if it helps.
    FNDLOAD apps/apps 0 Y DOWNLOAD $FND_TOP/patch/115/import/afcpprog.lct file_name.ldt PROGRAM APPLICATION_SHORT_NAME="<Application Short Name>" CONCURRENT_PROGRAM_NAME="<Concurrent Program Name>"
    Note: 602267.1 - How to Export a Concurrent Program and Executable Using Fndload ?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=602267.1
    Regards,
    Hussein

  • Error while compiling Web Dynpro program due to missing JAR files

    Hi Experts,
    I am getting error message while compiling Web Dynpro program. The erring lines are as below:
              Message message = new MimeMessage(session);
              try {
                   message.setFrom(new InternetAddress(fromMailId));
                   message.addRecipient(
                        Message.RecipientType.TO,
                        new InternetAddress(toMailId));
                   message.setSubject(mailSubject);
                   message.setText(mailBody);
                   message.setHeader("X-Mailer", "E-Mail");
                   message.setSentDate(new Date());
                   Transport.send(message);
    The error messages are:
    Message.ReceipientType can not be resolved
    The method send(Message) is undefined for the type Transport
    The method setFrom(InternetAddress) is undefined for the type Message
    The method setHeader(String, String) is undefined for the type MessageThe method setSentDate(Date) is undefined for the type Message
    The method setSubject(String) is undefined for the type Message
    The method setText(String) is undefined for the type Message
    Type mismatch: cannot convert from MimeMessage to Message
    Can you please help me in resolving the issue. It seems that some API is missing. I believe if some one can tell me the name of JAR file / API then I will be able to sort out the issue. I will add these JAR file in my program.
    Thanks,
    S

    HI Stuart,
    you are missing the jar files required for sending mail in java
    Installing JavaMail
    You will need the latest version of JavaMail (Version 1.2) available here:
    http://java.sun.com/products/javamail/
    Download and unzip the file, in the newly created top level JavaMail directory you will find a number of jar files,
    these need adding to your classpath.
    To do this in Eclipse, right click on your project in the tree view, select properties, select the libraries tab.
    Now click the 'Add external jars' button, navigate to your JavaMail directory and click on the jars.
    The tutorial also makes use of the Java Activation Framework, which is available here:
    http://java.sun.com/products/javabeans/glasgow/jaf.html
    Instalation of JAF is identical to JavaMail
    activation.jar / mail.jar are 2 distinct names i remember rest you will get above
    P.S: close the question to assist other users narrow the search and find solutions
    Message was edited by:
            Armin Reichert

  • Java error while compiling Web Dynpro program

    Hi Experts,
    I am getting following error message while compiling Web Dynpro program. The erring lines are as below:
              Message message = new MimeMessage(session);
              try {
                   message.setFrom(new InternetAddress(fromMailId));
                   message.addRecipient(
                        Message.RecipientType.TO,
                        new InternetAddress(toMailId));
                   message.setSubject(mailSubject);
                   message.setText(mailBody);
                   message.setHeader("X-Mailer", "E-Mail");
                   message.setSentDate(new Date());
                   Transport.send(message);
    The error messages are:
    Message.ReceipientType can not be resolved
    The method send(Message) is undefined for the type Transport
    The method setFrom(InternetAddress) is undefined for the type Message
    The method setHeader(String, String) is undefined for the type MessageThe method setSentDate(Date) is undefined for the type Message
    The method setSubject(String) is undefined for the type Message
    The method setText(String) is undefined for the type Message
    Type mismatch: cannot convert from MimeMessage to Message
    Can you please help me in resolving the issue. It seems that some API is missing. I believe if some one can tell me the name of JAR file / API then I will be able to sort out the issue. I will add these JAR file in my program.
    Thanks,
    S

    Hi,
    Have you imported the required JavaMail jar?
    Please tell me what API you are using for the same.
    Also check Barcode Printing from EP --using barcode4J (Gurus kindly help me) forum to check how to add external jar files into WebDynpro project
    Let me know if you need more help on it.
    Regards,
    Ashutosh

  • Error while copying the concurrent program

    Hi Experts,
    I am working on EBS 11i and database 9i. When i am trying to copy the existing concurrent program,it's giving below error.
    Error: Please enter a unique segment name, the segment name is already defined for other segment.
    Could you somebody help me to get rid off this error.
    Thanks.

    While copying the concurrent program, what is the short name and name for the new concurrent program?
    Hope you are not giving the same name as the old CP.
    By
    Vamsi

  • Rdf Report Error while running from concurrent program

    hi,
    i have created a RDF Report with the below query created Concurrent Prog exec and Concurrent Prog with the respective parameters
    p_fromsrdate---FND_STANDARD_DATE(ValueSet)
    p_tosrdate---FND_STANDARD_DATE(ValueSet)
    for the report layout i have taken example template working fine from the report console
    SELECT
    incident.Incident_Number as ServiceRequestNumber,
    TO_CHAR (incident.incident_date,'DD-MON-YYYY') as ServiceRequestDate,
    incident.Summary as Summary,
    agenttime.agentname as AgentName,
    to_char(agenttime.agentstarttime,'DD-MM-YYYY HH24:MI') as StartTime,
    to_char(to_date('00:00:00','HH24:MI:SS') +
    (agenttime.endtime-agenttime.agentstarttime), 'HH24:MI') as TimeSpent
    FROM cs_incidents_all_b incident,cs_agenttime_agv agenttime
    WHERE agenttime.incident_id=incident.incident_id
    AND incident.incident_date between to_date(:p_fromsrdate,'DD-MON-YYYY')
    AND to_date(:p_tosrdate,'DD-MON-YYYY');
    Service: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    AGTIMREP module: SR Agent Time Report
    Current system time is 01-AUG-2009 04:46:13
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_fromsrdate='2009/07/05 00:00:00'
    p_tosrdate='2009/07/20 00:00:00'
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Enter Password:
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-300: ORACLE error occurred.
    Report Builder: Release 10.1.2.0.2 - Production on Sat Aug 1 04:46:21 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4444878.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 01-AUG-2009 04:46:23
    ---------------------------------------------------------------------------

    hi,
    i have enabled the trace
    Service: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    AGTIMREP module: SR Agent Time Report
    Current system time is 01-AUG-2009 06:25:18
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_fromsrdate='2009/07/05 00:00:00'
    p_tosrdate='2009/07/07 00:00:00'
    -- Start of Reports Command --
    /home/orasfa/inst/apps/SFA_appsr12/ora/10.1.2/bin/appsrwrun.sh
    P_CONC_REQUEST_ID=4444890
    p_fromsrdate='2009/07/05 00:00:00'
    p_tosrdate='2009/07/07 00:00:00'
    report=/home/orasfa/apps/apps_st/appl/cs/12.0.0/reports/US/AGTIMREP.rdf
    batch=yes
    destype=file
    desname=/home/orasfa/inst/apps/SFA_appsr12/logs/appl/conc/out/o4444890.out
    desformat=XML
    -- End of Reports Command --
    Request language is :
    AMERICAN
    Request territory is :
    AMERICA
    APPLLCSP Environment Variable set to :
    Previous NLS_LANG Environment Variable was :
    American_America.UTF8
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Enter Password:
    REP-0069: Internal error
    REP-50002: Server is shutting down
    Report Builder: Release 10.1.2.0.2 - Production on Sat Aug 1 06:26:20 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Reset original NLS_LANG in environment as :
    American_America.UTF8
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4444890.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 01-AUG-2009 06:26:20
    ---------------------------------------------------------------------------

  • Error while executing MPI enabled program

    Hi All,
    I am new to these type of programming. Linux. and using Intel compiler.
    I have comiled my application successfully but its giving the below error while exuting.
    I am working on linux X86_64
    Please help thanks in advance.
    libibverbs: Fatal: couldn't read uverbs ABI version.
    open_hca: device mlx4_0 not found
    [0] DAPL provider is not found and fallback device is not enabled
    [unset]: aborting job:
    Fatal error in MPI_Init: Other MPI error, error stack:
    MPIR_Init_thread(283): Initialization failed
    MPIDD_Init(98).......: channel initialization failed
    MPIDI_CH3_Init(176)..: generic failure with errno = -1
    Looking for solution
    Reply With Quote

    Hi,
    unfortunately this is a forum for errors related to Oracle RAC (real application cluster) issues.
    As far as i can see your issue is not related. I doubt anybody is able to help you here.
    Ronny Egner
    My Blog: http://blog.ronnyegner-consulting.de

  • Error while installing Standard BI Content- Datasource not maintained

    Hi,
    While installing Standard BI Content, namely MultiProviders within Cost Center Accounting, I am getting the following error:
    DataSource 0DBDUNSIMPORT_ATTR not maintained_
    I am collecting the MP with Grouping-in Dataflow below for installation. The installation ends in error. However within InfoProviders tab the MP's are shown active. Is the above mentioned error going to have any advese impact during data load ? What is the procedure to get it rectified ?
    Regards,
    Amogh

    Hi,
    When you collect objects during installating business content, the system will collect all the datasources pertaining to the main object. Once the collection is done, system will display all the datasources which are not activated below. Check if you need all those datasources for your modelling. Usually for data sources for attributes and texts will end up in RED. You can just ignore and continue to install if you dont require in your development.
    In our implementation we dont use DUNNING, so we just ignored and installed. Installation was successful, But sometimes you will get warnings which you need to check.
    thanks
    Srikanth

  • Error while compiling Pro*C program

    Hi,
    I get the following error while compiling and linking Pro*C program.
    /home/barts/builddir $ make build_get_plc_data
    Making Object files for get_plc_data.c
    /usr/ccs/bin/cc -c +DD64  -I. -I../lib  -I/u01/dba/oracle/product/1012ias/precomp/public get_plc_data.c
    /usr/ccs/bin/cc -o get_plc_data get_plc_data.o -L/u01/dba/oracle/product/1012ias/lib -lclntsh +DD64
    ld: Unsatisfied symbol "sqlcx2t" in file get_plc_data.o
    ld: Unsatisfied symbol "main" in file <no file>
    2 errors.
    *** Error exit code 1 (ignored)
    /bin/rm -f get_plc_data.o
    Please suggest what could be causing this issue?
    Regrads,
    Dhivya

    I don't see a specific Proc or precompiler forum around here.
    Perhaps your best bet would be at [Call interface (OCI)|http://forums.oracle.com/forums/forum.jspa?forumID=67] forum or maybe [SQL and PL/SQL|http://forums.oracle.com/forums/forum.jspa?forumID=75] since it's more of a developers' forum.

Maybe you are looking for

  • My iPod touch 4th generation isn't turing on

    My iPod Touch 4th generation isn't turing on, and when I plug it into the computer it still isn't turing on. iTunes dosen't even recognize it and I have the latest iTunes for it!! My iPOd hasn't had any damage done to it, it just won't work!!! PLEASE

  • Is there a way to specifiy memory size usage in embedded OC4J?

    I'm using JDeveloper 9.0.3 and am having a problem with EJB's not being created at a certain point in my application. I can create EJBs fine up to a certain point then I start to get java.rmi.RemoteException's, even when i try to create the exact sam

  • Connecting SAP (4.7ee) to My SQL 2000

    Hi Experts, Our users are allowed to create Purchase Order in a Sea Sharp web services and MySQL database maintained by other company. Our requirement is to get the PO information from that system and create Sales Order in SAP system (Version 4.7ee).

  • Multiple line in alv

    hi I want tio create an ALV report as shown in the below link , please explain me [http://a.imagehost.org/view/0414/asset]

  • No progress for files in conversion processing

    Uploaded a pdf to convert to doc. While it was showing the progress bar animation, I clicked over to the files tab and then back again to the tools tab. There's no longer a progress bar animation on the tools page and no indication that a conversion