Error while running concurrent program in Release 12.0.6

Hi All,
We are running many requests of a concurrent program in parallel in Oracle Applications Release 12.0.6 and many requests are erroring out with the below error message :
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 15 (X_QueryTree)
Resource id in failed request: 0x7400001
Serial number of failed request: 532
Current serial number in output stream: 532"
Could someone please advise as to what could be the issue here.
This is happening in production instance
Thanks

we are getting the same error in 11.5.10 oracle apps!
Current system time is 19-MAR-2013 11:41:33
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_cust_trx_class='CM'
p_trx_number_low='1'
p_trx_number_high='1'
p_project_number='2160610'
p_report_fmt='Y'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
p_pmt_advice='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Spawned Process 5484
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 15 (X_QueryTree)
Resource id in failed request: 0xa400001
Serial number of failed request: 518
Current serial number in output stream: 518
Database version: 10.2.0.4

Similar Messages

Error while running the program of deferred Tax ( New)Program Name RFUMSV50

Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PM

Check the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi

ORACLE error 1847 in FDPSTP while running concurrent program

When I try to run concurrent program getting below error
ORACLE error 1847 in FDPSTP
Cause: FDPSTP failed due to ORA-01847: day of month must be between 1 and last day of month
ORA-06512: at line 1
Parameters
Org_id number
Date select sysdate from dual;
Executable
PROCEDURE call_iptp15c (
p_operating_unit_in IN ap_invoices_all.org_id%TYPE,
p_start_date_in IN DATE,
ERROR_BUF OUT VARCHAR2,
RETCODE OUT VARCHAR2
What would be the reason for this.

Hi,
Please mention the application release along with the database version and OS.
Is this a custom or seeded concurrent program?
Please make sure you use a valid date format -- Note: 19171.1 - OERR: ORA 1847 day of month must be between 1 and last day of month
Thanks,
Hussein

Strange error while running java program in oracle

Hi all,
I have written a java program and saved it as .sqlj file. i have to run the program on sql prompt.
while running the program i am getting the following error.Please help me.I am in urgent situation
ORA-29536: badly formed source: User has attempted to load a class
(tactossSecurity) into a restricted package. Permission can be granted using
dbms_java.grant_permission(<user>, LoadClassInPackage...
Thanks & Regards
Raghavender Rao Kodumuri

Raghavender,
I also answered you in the SQL forum, where you posted the exact same question.
Re: Trying to execute java programm in oracle getting the following error
Good Luck,
Avi.

Error while running jms program in eclipse

Hi,
Friends.I am new to forum.This is the first question I am posting.I am new to Java Messaging service.While running the program in eclipse I am getting the following error...
javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'scsstasdap03:QSEIBEL'
     at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:569)
     at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2328)
     at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1749)
     at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:144)
     at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:54)
     at com.ibm.mq.jms.MQQueueConnectionFactory.createQueueConnection(MQQueueConnectionFactory.java:106)
     at com.bofa.pbes.cedapi.cmwmq.JMSManager.<init>(JMSManager.java:87)
     at com.bofa.pbes.cedapi.cmwmq.JMSManager.<clinit>(JMSManager.java:40)
     at com.bofa.pbes.cedapi.cmwmq.JMSCEDAgent.<init>(JMSCEDAgent.java:24)
     at com.bofa.pbes.cedapi.cmwmq.MessageProcessingController.<init>(MessageProcessingController.java:34)
     at com.bofa.pbes.cedapi.cmwmq.MessageProcessingController.<clinit>(MessageProcessingController.java:38)
java.lang.ExceptionInInitializerError
Caused by: java.lang.NullPointerException
     at com.bofa.pbes.cedapi.cmwmq.JMSManager.addMessageListener(JMSManager.java:173)
     at com.bofa.pbes.cedapi.cmwmq.JMSCEDAgent.<init>(JMSCEDAgent.java:25)
     at com.bofa.pbes.cedapi.cmwmq.MessageProcessingController.<init>(MessageProcessingController.java:34)
     at com.bofa.pbes.cedapi.cmwmq.MessageProcessingController.<clinit>(MessageProcessingController.java:38)
Exception in thread "main"
Please help me.....

Have a look in eclipse in the menu under window -> preferences -> java -> installed jre's which one is selected there.
Than you have to check you project settings: right click on the project and select properterties. Check "Java Build Path" and "Java Compiler" settings.
If you run your program, the console also shows the version you are running. If it is an 1.6 version everything should work.

Error While Submitting Concurrent Program

Hi all,
While submitting Concurrent Program in HRMS to check the Seeded Output,I am getting the following Message
app-fnd-00314 invalid printer ( not print ) and print style (ZA PS Portrait) combination.
Could someone please tell me How could I figure it out.
Thanks & Regards

914618 wrote:
Hi all,
While submitting Concurrent Program in HRMS to check the Seeded Output,I am getting the following Message
app-fnd-00314 invalid printer ( not print ) and print style (ZA PS Portrait) combination.
Could someone please tell me How could I figure it out.
Thanks & RegardsWhat is the type of the concurrent program?
Are you printing to specific printer or to noprint?
Please see the solution in these docs.
Accrual Reconciliation Report Errors With APP-FND-00314 Invalid Printer And Print Style Combination [ID 564009.1]
Cash/Bank Book Report Error APP-FND-00314: "invalid printer and print style inloc_bacs” [ID 551975.1]
Quarterly Tax Return Worksheet (Form 941) Fails With APP-FND-00314 [ID 307701.1]
Thanks,
Hussein

Getting warning while running concurrent program for XML report

HI,
Am trying to run a xml-publisher report by converting a D2k report and am getting the following warning message and not getting the out put.
Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XX_EMPLOYEES module: XX_EMPLOYEES
Current system time is 04-DEC-2007 12:25:37
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/dplay/applmgr/product/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /dplay/applmgr/product/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Tue Dec 4 12:25:38 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2057165 on node CRMAP102.ASHOKLEYLAND.COM at 04-DEC-2007 12:25:42.
Post-processing of request 2057165 failed at 04-DEC-2007 12:27:43 with the error message:
The Output Post-processor is running but has not picked up this request.
No further attempts will be made to post-process this request, and the request will be marked
with Warning status.
Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary.
------------- 2) PRINT -------------
Finished executing request completion options.
Concurrent request completed
Current system time is 04-DEC-2007 12:27:43
pls help
Thanks

Hi
pls see this post
OPP Timing out
Thanks
Rahul

Getting Error While Attaching Concurrent Program Output PDF file for POAPPRV Workflow

Hi All,
I am getting the below error when I am trying to attach concurrent program output to the PO Approval Notification.
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 1040589-528378
User Key =945871
Error Name = WF_ERROR
Error Message = [WF_ERROR] ERROR_MESSAGE=3835: Error '-20002 - ORA-20002: [WFMLR_DOCUMENT_ERROR]' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK=
Wf_Notification.GetAttrblob(3604701, ZZ_PREVIOUS_PO_COMPARE, text/html)
WF_XML.GetAttachment(3604701, text/html)
WF_XML.GetAttachments(3604701, http://oraerp.am.corp.xxxx.com:8099/pls/DEV, 11283)
WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 3604701)
WF_XML.Generate(oracle.apps.wf.notification.send, 3604701)
WF_XML.Generate(oracle.apps.wf.notification.send, 3604701)
Wf_Event.setMessage(oracle.apps.wf.notification.send, 3604701, WF_XML.Generate)
Wf_Event.dispatch_internal()
Error Stack =
Activity ID = 190844
Activity Label = AL_NOTIFY_APPROVER_PROCESS:ZZ_PO_PO_APPROVE_ATTCH
Result Code = #MAIL
Notification ID = 3604701
There are several threads for this error however I cannot find any specific solution to the problem.
Please find the code below -
    wf_engine.setitemattrdocument(itemtype=>itemtype,
                                  itemkey=> itemkey,
                                  aname=>'ZZ_PREVIOUS_PO_COMPARE',
                                  documentid =>'PLSQLBLOB:zz_po_reqapproval_init1.xx_notif_attachments/' || to_char(l_request_id_prev_po)||':'||to_char(l_document_num));
-- here l_request_id_q_and_s is the request id of the program and l_document_num is the PO document number
PROCEDURE xx_notif_attachments(p_request_id    IN VARCHAR2,
                               p_document_num IN VARCHAR2,
                               p_document      IN OUT BLOB,
                               p_document_type IN OUT VARCHAR2) IS
v_lob_id          NUMBER;
v_document_num    VARCHAR2(15);
v_document_prefix VARCHAR2(100);
v_file_name       VARCHAR2(500);
v_file_on_os      BFILE;
v_temp_lob        BLOB;
v_dest_offset     NUMBER := 1;
v_src_offset      NUMBER := 1;
v_out_file_name   VARCHAR2(2000);
v_conc_prog_name VARCHAR2(500);
v_conc_req_id     NUMBER;
CURSOR get_output_file(p_concurrent_request_id NUMBER) IS
    SELECT cr.outfile_name, cp.concurrent_program_name
      FROM fnd_concurrent_requests cr, fnd_concurrent_programs_vl cp
     WHERE request_id = p_concurrent_request_id
       AND cp.concurrent_program_id = cr.concurrent_program_id;
BEGIN
--    set_debug_context('xx_notif_attach_procedure');
v_conc_req_id := to_number(substr(p_request_id,
                                     1,
                                     instr(p_request_id, ':') - 1));
v_document_num := substr(p_request_id,
                           instr(p_request_id, ':') + 1,
                           length(p_request_id) - 2);
OPEN get_output_file(v_conc_req_id);
FETCH get_output_file
    INTO v_out_file_name, v_conc_prog_name;
CLOSE get_output_file;
v_out_file_name := substr(v_out_file_name,
                            instr(v_out_file_name, '/', -1) + 1);
v_file_name     := to_char(v_document_num) || '-Previous_PO_Rev.pdf';
utl_file.fcopy(src_location => 'APPS_OUT_DIR',
                 src_filename => v_out_file_name,
                 dest_location => 'PO_DATA_DIR',
                 dest_filename => v_file_name);
-- v_lob_id := to_number(v_document_id);
v_file_on_os := bfilename('PO_DATA_DIR', v_file_name);
dbms_lob.createtemporary(v_temp_lob, cache => FALSE);
dbms_lob.fileopen(v_file_on_os, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(dest_lob    => v_temp_lob,
                            src_bfile   => v_file_on_os,
                            amount      => dbms_lob.getlength(v_file_on_os),
                            dest_offset => v_dest_offset,
                            src_offset => v_src_offset);
dbms_lob.fileclose(v_file_on_os);
p_document_type := 'application/pdf;name=' || v_file_name;
dbms_lob.copy(p_document, v_temp_lob, dbms_lob.getlength(v_temp_lob));
EXCEPTION
WHEN OTHERS THEN
    wf_core.CONTEXT('ZZ_PO_REQAPPROVAL_INIT1',
                    'xx_notif_attachments',
                    v_document_num,
                    p_request_id);
    RAISE;
END xx_notif_attachments;
Please help me find a to the above mentioned error.
Thanks,
Suvigya

There are two ways to look at what error the PLSQLBLOB API is throwing.
1) Call your PLSQLBLOB API GNE_PO_CREATE_FILE_ATTACHMENT.Gne_Create_File_Attachment directly from a PLSQL block and verify that it returns the BLOB data successfully.
You could also call another WF API that in turn executes the PLSQLBLOB API internally. For example,
<pre>
declare
l_document blob;
l_doctype varchar2(240);
l_aname varchar2(90);
begin
dbms_lob.CreateTemporary(l_document, true, dbms_lob.Session);
-- 207046 - This is the notification id of your failed workflow
-- PO_REPORT - Document type attribute
-- 'text/html' - Content Type being generated for
Wf_Notification.GetAttrBLOB(207046, 'PO_REPORT', 'text/html', l_document, l_doctype, l_aname);
-- Print the size of the document here to verify it was fetched correctly
end;
</pre>
2) Turn on log for SYSADMIN user with following attributes.
Log Enabled = TRUE
Log Level = ERROR
Log Module = wf.plsql%
Restart the Workflow Deferred Agent Listener and Workflow Notification Deferred Agent Listener and run your workflow process. Search for log messages written for above context and you can identify the error at wf.plsql.WF_XML.GetAttachment module with message starting as "Error when getting BLOB attachment ->"
Hope this helps.
Vijay

Error while running J2ME program in KtoolKit

hi,
i am doing my project in j2me as i m developing a Jabber client .where my Client application has to connect jabber server through GPRS...
so while running the project in KToolKt it ask that client application wants to send the information this requires airtime which may cost you money.is this ok?(TCP)
after clicking on yes option program goes in deadlock...thorws following error message
Error
=====
Warning: To avoid potential deadlock, operations that may block, such as
networking, should be performed in a different thread than the
commandAction() handler.
===================
plz send me solution if you know....
regards...

jhd
hi.
this is a common error whenever we are accesing some other basedir other than current base we have to access that via new thread
i.e suppose i have written the code to make HttpConnection in command Action we can not access it via same thread so we ahave to create another thread and from that thread we have to call our function in which we are making HttpConnection or any RMS operation......
if(c == connectionCommand)
new Thread(new Runnable() {
          public void run() {
            makeConnection();
}).start();
}in this code when you are pessing connectionCommand it will create new thread and from that thread it will call makeConnaction in which we have to write code to establish connection.
i hope this will solve your problem.
Regards,
Jasmit vala.
rajputjasmit@ yahoo.co.in

Error while running HelloWorld program Please Help me

Hi Friends! I am doing my hello world program...while running i m getting the below error...please help me regarding this...
The target WSCO.java cannot be started as a servlet, because the class oracle.apps.ak.ws.webui.WSCO does not extend javax.servlet.GenericServlet.
The target WSCO.java cannot be started as an application, because the class oracle.apps.ak.ws.webui.WSCO does not have a main method.

Hi,
For building a simple hello world page, follow these steps:
1) Create a New OA Workspace and a new OA Project. Make sure that package name should be prefixed by some custom name like:
xx.oracle.apps.ak.hello
2) Create new OA Page under webui:
xx.oracle.apps.ak.hello.webui.XxHelloWorldPG
3) Create a new Application module, XxHelloWorldAM in below package:
xx.oracle.apps.ak.hello.server.XxHelloWorldAM
4) Attach this AM to your XxHelloWorldPG.
5) Now create regions and items under pageLayout region of this page.
6) Add a controller to pageLayout region in webui package:
xx.oracle.apps.ak.hello.webui.XxHelloWorldCO
Also you can add a button on the page and write some code in PFR method of your controller.
--Sushant

Error while running HelloWorld program

Hi Friends! I am doing my hello world program...while running i m getting the below error...please help me regarding this...
The target WSCO.java cannot be started as a servlet, because the class oracle.apps.ak.ws.webui.WSCO does not extend javax.servlet.GenericServlet.
The target WSCO.java cannot be started as an application, because the class oracle.apps.ak.ws.webui.WSCO does not have a main method.

Hi Friends! I am doing my hello world program...while running i m getting the below error...please help me regarding this...
The target WSCO.java cannot be started as a servlet, because the class oracle.apps.ak.ws.webui.WSCO does not extend javax.servlet.GenericServlet.
The target WSCO.java cannot be started as an application, because the class oracle.apps.ak.ws.webui.WSCO does not have a main method.

Error while running the program

Hello everybody
I have installed jdk in my computer, but when I try to run the program it shows the following error
"Unable to load the main class"
The program is compiling properly the only problem is in running the program.
What is the reason for this error and how can I fix this error?
Regards

Are you familiar with the classpath?
It tells the JRE which directory has your *.class files.
At the command line, you would java -cp dir_name class_file_nameIf you're using an IDE, check the menus at the top of the editor screen.

Error while running saschinvoke program for running the ibots created.

Hi Experts,
I am trying to invoke an ibot job from the unix command line. But, it is erroring it out. Can any one please help why is this error.
[oracle@ginza oracle]$ cd OracleBI
[oracle@ginza OracleBI]$ cd server
[oracle@ginza server]$ cd Bin
[oracle@ginza Bin]$ ./saschinvoke -u Administrator/abc2008 -j 5
./saschinvoke: error while loading shared libraries: libnqschedulerobjects.so: cannot open shared object file: No such file or directory
[oracle@ginza Bin]$ ls -l saschinvoke
-rwxr-x--- 1 oracle oracle 511132 Jul 30 2008 saschinvoke
[oracle@ginza Bin]$ pwd
/sdb1/appl/oracle/OracleBI/server/Bin
Thanx
svr
Edited by: user8699680 on Sep 1, 2009 5:38 PM

Hi Experts,
Thanks for all your valuable inputs.
But still I have another problem in running my script. This time it is with the authentication. here is the log file
[oracle@ginza svr]$ ./autocache.sh
Oracle BI SASchInvoke
Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
Execution Error: [nQSError: 68019] Authentication Failed.job completed
[oracle@ginza svr]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle)
I am here trying to run the script with Oracle unix user with which the OBIEE has been installed on linux server. I had checked that, all the files and script has necessary permissions, but missing some authentication. For further information, my instanceconfig.xml file has the following contents... ( where cryptools has run and passphare is mentioned in the instanceconfig.xml file)
<CredentialStore>
<CredentialStorage type="file" path="/sdb1/appl/oracle/OracleBIData/web/config/credentialstore.xml" passphrase="ppsecret"/>
</CredentialStore>
Pls let me know you valuable inputs to resolve this issue.
Thanks
svr

Rwrun.exe - Application Error while running Concurrent Requests in R12(Win)

Hi Gurus,
I am getting the Rwrun.exe Application error, whenever i am running a concurrent request. The thing, that i feel is: Probably, The concurrent requests that has the output file associated with them are the one that are running into error.
The following is the description of the error popup:
rwrun.exe - Application Error
The instruction at "0x663ed168" referenced memory at "0x00000004". The memory could not be "read".
Click OK to terminate the program.
Click CANCEL to debug the program.
Due to this, am not able to submit any of the Reports.
Details of My installation:
Apps Version: Release 12
Platform: Windows XP SP2
Installed on: External HDD of 250GB
Addon Patches after install: None.
Has anybody faced this problem earlier?
Please help me out gurus..
Thanks in advance.
Regards,
Ajit

Check the Event Viewer to see if there is more information about the error that can help.

Error while running Swing program on FreeBSD

Hi,
I am trying to run simple swing program "helloworld"
but while executing it gives following error on FreeBSD
Exception in thread "main" java.lang.UnsatisfiedLinkError:
/usr/local/linux-sun-jdk1.4.2/jre/lib/i386/libawt.so: libXp.so.6:
cannot open shared object file: No such file or directory
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1560)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1477)
        at java.lang.Runtime.loadLibrary0(Runtime.java:788)
        at java.lang.System.loadLibrary(System.java:834)
        at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
        at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
        at java.awt.EventQueue.<clinit>(EventQueue.java:80)
        at javax.swing.SwingUtilities.invokeLater(SwingUtilities.java:1170)
        at JPanels.main(JPanels.java:29)
Should i install XFree86-libs package on FreeBsd
configuration
FreeBSD 4.10-BETA (GENERIC)
I am using following packages
linux-sun-jdk-1.4.2.04 Sun Java Development Kit 1.4 for Linux
linux_base-8-8.0_4 Base set of packages needed in Linux mode (only for i386)
linux_devtools-8.0_1 Packages needed for doing development in Linux mode
libtool-1.3.5_1 Generic shared library support script
gmake-3.80_1 GNU version of 'make' utility
automake-1.4.5_9 GNU Standards-compliant Makefile generator (legacy version
GCC 2.95.4
gdb 4.18
ld 2.12.1 supported emulation elf_i386
regards
Man479

This is not really a Swing question. You should install the library which satisfies the lookup of libXp.so.6 .
I quess the jre for this platform is compiled against this version. Looks to me like some X related library, maybe google can resolve a solution/package to install?
Greetz

Error while running concurrent program in Release 12.0.6

Similar Messages

Maybe you are looking for