Error while saving planning function in IP

Hello All,
   I have a problem while creating a FOX function in IP. When I save it, I get an error "RFCSave: An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE".
   The strange thing is that, when there is any syntax error in the FOX code, it gets saved; but as soon as I remove all the errors, I get this message on pressing the save button in the planning modeler.
    I never faced this problem before. Can anybody suggest something?
Regards,
Mayank

Just for information; this was a bug. We raised an OSS case and got the solution (to apply few OSS notes). We are on Support Package 10. It seems this issue does not occur on Support Package 11.

Similar Messages

Error while executing planning Function

Hi All,
I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
Errors occurred when executing planning function RTFMPF01/RTFMPG01
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
Thanks,
Vamsi

Hi,
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Looks like there is a characteristics relationship which derives the attribute store from Region.
Check the master data for Region for attribute Store and the corresponding values.
The values that are maintained in the master data will only be allowed to enter in the cube.
Thanks
pratyush

Macro Error while executing planning functions or saving data

Dear All,
I am getting following error in BEx Analyzer while executing planning function or pressing a save button.
Note: Excel is 2007 version.
Cannot run the macro "XXXXXX.xlsx". The macro may not be available in this workbook or all macros may be disabled.
I changed the settings in Macro Settings (Office Button -> Excel Options -> Trust Center -> Trust Center Settings-> Macro Settings) eventhough it is showing that above message.
selected ->
Enalble all macros
Trust access to VBA project object model.
If anybody faced this issue kindly reply to this.
Best Regards,
SG

Hello everybody,
i am facing exactlythe same issue! I am currently running GUI Patch Level 14 and BI Add on Patch Level 10.
I have also adjusted all necessary settings in Excel Options like Activate all Macros and Trust VBA Coding.
Does anybody have another Solution.
As mentioned before Gui Patch 13 and BI Add On Patch 10 obviously arent the solutiuon.
Best regards
Janos

Error while executing planning function with reference data

Hi,
I have a two planning functions one is used to upload the file (with out reference data checkbox in planning function RSPLF1) and other planning function ('Referece data'check box is selected in custom planning function RSPLF1) to execute the logic of creating new record along with the flat file data.
Following data is uplooaded
Company code | Profit_ctr | calmonth | Amount
1000                 | 50000      | 01.2011 | 150
Cube data
Field1    | Company code | Profit_ctr | calmonth | Amount
         | 1000                 | 50000      | 01.2011 | 150
Z1         | 1000                 | 50000      | 01.2011 | 150
Now I want to change the value from 150 to 200 and when I try to execute with the following data, it is giving dump 'a row with the same key already exists'.
Company code | Profit_ctr | calmonth | Amount
1000             | 50000          | 01.2011 | 200
Ideally in the second execution it should append the new row with Amount value 50 to cube which is the delta value.
I debugged the issue and found that I_TH_REF_DATA has following data and C_TH_DATA also contains the same records.
Field1     Company code | Profit_ctr | calmonth | Amount
#     1000                 | 50000      | 01.2011 | 150
Z1     1000                 | 50000      | 01.2011 | -150
Z1     1000                 | 50000      | 01.2011 | 150
Due to this, record which already exists in C_TH_DATA and trying to append new record with the same combination is failing.
C_TH_DATA should only contain the source data of Amount 200, but not sure why reference data is coming in C_TH_DATA.
Could anyone please guide me on how the reference data is getting populated in C_TH_DATA ?
Thanks in advance
Edited by: peppy on Aug 3, 2011 5:00 PM
Edited by: peppy on Aug 3, 2011 8:37 PM

Hi Peppy,
C_TH_DATA is hashed table! According to your post you are trying to append to C_TH_DATA and this results in a dump. Please take a look at the standard planning function to see how SAP is programming the planning functions. E.g. in CL_RSPLFC_REPOST method IF_RSPLFA_SRVTYPE_IMP_EXEC~EXECUTE you can find the following code:
CREATE DATA l_r_data_wa LIKE LINE OF c_th_data.
ASSIGN l_r_data_wa->* TO <s_data_wa>.
CREATE DATA l_r_new_wa LIKE LINE OF c_th_data.
ASSIGN l_r_new_wa->* TO <s_new_wa>.
LOOP AT c_th_data INTO <s_data_wa>.
<s_new_wa> = <s_data_wa>.
now the SAP code changes the values, you can do it your way here
and than write the changes back
        MODIFY TABLE c_th_data FROM <s_data_wa>.
ENDLOOP:
Another option is to use the READ statement to check if the record is already in the table. If not, you can use MODIFY otherwise you use INSERT. So you get something like this:
READ C_TH_DATA from <s_data_wa> transporting no fields.
if not sy-subrc EQ 0.
INSERT <s_data_wa> into table C_TH_DATA.
else.
MODIFY TABLE c_th_data FROM <s_data_wa>.
endif.
Depending on your requirements you can also use the collect statement.
If c_th_data shows the reference data as well, you may need to adjust the filter to restrict it to the correct values.
Hope this helps.
Best regards
Matthias Nutt
SAP Consulting Switzerland

Error while saving data form in planning

Hi,
We are getting the below error while saving the data form in planning
"There was an error during the save process"
i believe our form is not exceeds 255 columns we were able to access the same form till yesterday
can any one please help me on this

One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

Error while saving the documents in Transactions MIRO,VA02, VA01, ects

Hi SAP Gurus,
i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
The error is * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
can u please help me out.
Regards
Kumar m

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

I am getting error while saving new WORKFLOW

Dear All,
Please help me for the following issue.
I am trying to make new WORKFLOW but system gives a ERROR while saving from SWDD tcode.
error is:
System error: Function cancelled
Message no. WD255
Regards,
Mukesh

Hi Mukesh,
You have to maintain the Prefix numbers in the system, in tcode SWU3 --> maintain definition environment --> Maintain prefix number --- > click on execute button.
There, create a new value for your client(XXX) system to generate the workflow definition / task definition.
Regards,
Murali Krishna.

Error while saving state in 'client' , in ADF faces application

Thank you for reading my post
I have an ADF faces application and i get this error and my application does not function correctly , does any one has an idea ?
thanks
06/10/17 17:34:38.15 10.1.3.1.0 Started
06/10/17 17:34:55.546 web2: 10.1.3.1.0 Started
06/10/17 17:45:49.531 web2: Servlet error
java.lang.NullPointerException
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
06/10/17 17:46:02.703 web2: Servlet error
javax.servlet.jsp.JspException: Error while saving state in 'client': 'An established connection was aborted by the software in your host machine'.
     at com.sun.faces.taglib.jsf_core.ViewTag.doAfterBody(ViewTag.java:206)
     at _index._jspService(_index.java:473)
     at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.1.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:287)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:167)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:619)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)

StateManagerImpl.saveSerializedView tries to let UIViewRoot be a session
attribute and the error message says it should be serializable; certainly it' not.
I think HttpSession.setAttribute does not claim the object should be serializable.
I don't know why apache's StandardSession.setAttribute claims so.

Error while saving territory

Hi Experts
while saving territory, i am getting below error.
Error while saving rule score; contact technical support
Wait and try to activate the changes later
Details Could not lock object Application 'Territory Management' for processing-relevant changes due to user <user name>
Activation error for Decision Table 'table[BP_Z_SCORE,TERRITORY(Res...'; see following messages for details
Activation error for Function '005056010AED1EE48BB6A35289225BE3 : s...'; see following messages for details
I have attached screenshot to refer the error. Please get me some pointer to resolve this error..
Thanks
Chand

Did user SCBASHA lock something? You could check in transaction SM12.
Best regards,
Thomas Wagner

Error while saving config in MSY

Hi,
I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
-> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
1. 'MTBLLFW-The attribute destination of the business object
relation type is not valid'.
2. 'MTBLLFW-the attribute source of the business object relation
types is not valid'
But it is allowing me to add an entry. When i save my customer entry i am getting the error :
3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
If anyone has any idea please let me know.
Thanks in advance,
Karuna.

Hi,
did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
Also you should check & compare the download monitor for CDB load in the CRM system(s).
I assume sth is missing there (see also your other post).
Regards,
Wolfhard

WCM Error while saving Project

Hi,
I am getting following error while saving new created project in cProject.
Saving is not possible because the WFM Core data could not be adjusted
Message no. PRP086
Diagnosis
When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
The WFM Core configuration has been changed in Customizing.
The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
When working with the application, an existing resource already assigned in the WFM Core is deleted.
System Response
The project cannot be saved.
Procedure
Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
Let me know how to resolve this issue??
Thanks in advance,
Atul.

hi Atul,
Are you using WFD server for your resource planning in cProjects???
If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
If not, then do following settings to remove the error you are getting:
1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
Maintain following setting:
Group Sem. abbr Value abbr Description
HRALX HRAC X Activate HR Integration
2) SPRO -> Collaboration Projects -> Resource management Qualification Management-> Activate Qualification Search and Matchup Using WFM Core
In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
Hope this will be helpful to you.
Regards,
Niraj Sikligar

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Error while saving planning function in IP

Similar Messages

Maybe you are looking for