Error while trigerring Outbound Proxy

Hi ,
I am trying to execute a Proxy to File Scenario. While trigetting a proxy I get the following error.
GET_BUSINESS_SYSTEM_ERROR, An error occured while determining the business system.
I have checked previous posts related to the same issue and also cross checked the settings. But I am not able to get this solved. Can anybody help me out with some inputs.
Also when I check the cache in the SAP system it shows me in error. But in PI the cache contents are consistent.
Thanks
Amit

Hi Amit,
Check this link if you not check
ABAP Proxy error : GET_BUSINESS_SYSTEM_ERROR
Regards
Ramesh

Similar Messages

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

Error while executing the proxy service

Hi,
I have a procedure which uses a database link to access my tables. And business service will invoke this procedure through JCA.
We have created a datasource (Driver : non - XA for Service connections). However, while executing the proxy service it gives me below error.
Do i need to change the type of driver. Can anybody please help me on this.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header xmlns:com1="com:gm:vehicleengineering:engineeringworkorder:ewostatus:types:ewostatusschema:1:0" xmlns:com="com:gm:common:utilities:types:servicecontrol:1:0">
<com:ServiceControl>
<com:Service>EWOStatus</com:Service>
<com:Version>1.0</com:Version>
<com:ConsumerID>CID</com:ConsumerID>
<com:MessageID>MID</com:MessageID>
<com:SentTimeStamp>2008-09-28T21:49:45</com:SentTimeStamp>
</com:ServiceControl>
</soapenv:Header>
<soapenv:Body>
<soapenv:Body>
<com:ServiceFault xmlns:com="com:gm:common:utilities:types:servicefault:1:0">
<com:FaultCode>SOAFLT-999</com:FaultCode>
<com:FaultString>GeneralError</com:FaultString>
<com:FaultActor>Server</com:FaultActor>
<com:FaultDetail>Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/VehicleEngineering/EngineeringWorkOrder/EWOStatus/V1/WSDL/jcaEWOStatus_1_0_0 [ GetEWOStatus_ptt::GetEWOStatus(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'GetEWOStatus' failed due to: Interaction processing error.
Error while processing the execution of the SP_GETEWOSTATUS API interaction.
An error occurred while processing the interaction for invoking the SP_GETEWOSTATUS API. Cause: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Internal error: Cannot obtain XAConnection java.lang.ClassCastException: oracle.jdbc.driver.T4CConnection
 at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1684)
 at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439)
 at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
 at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
 at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:126)
 at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94)
 at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
 at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.connectInternal(DatasourceAccessor.java:327)
 at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.connectInternal(DatabaseAccessor.java:295)
 at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.reconnect(DatasourceAccessor.java:558)
 at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.reconnect(DatabaseAccessor.java:1437)
 at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.incrementCallCount(DatasourceAccessor.java:303)
 at oracle.tip.adapter.db.DBConnection.getTopLinkSQLConnection(DBConnection.java:335)
 at oracle.tip.adapter.db.transaction.DBTransaction.beginInternal(DBTransaction.java:126)
 at oracle.tip.adapter.db.sp.SPInteraction.executeStoredProcedure(SPInteraction.java:93)
 at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:248)
 at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:534)
 at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:257)
 at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
 at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
 at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
 at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:572)
 at sun.reflect.GeneratedMethodAccessor771.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
 at $Proxy142.sendMessageAsync(Unknown Source)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:152)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:560)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
 at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
 at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
 at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
 at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
 at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
 at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
 at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
 at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
 at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
 at com.bea.wli.sb.transports.CoLocatedMessageContext$1.run(CoLocatedMessageContext.java:164)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at weblogic.security.Security.runAs(Security.java:61)
 at com.bea.wli.sb.util.security.SecurityUtils.runAs(SecurityUtils.java:58)
 at com.bea.wli.sb.transports.CoLocatedMessageContext.send(CoLocatedMessageContext.java:157)
 at com.bea.wli.sb.transports.http.wls.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:215)
 at sun.reflect.GeneratedMethodAccessor771.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
 at $Proxy122.sendMessageAsync(Unknown Source)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:152)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:560)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
 at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
 at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
 at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
 at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
 at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
 at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
 at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
 at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
 at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
 at com.bea.wli.sb.transports.http.generic.RequestHelperBase$1.run(RequestHelperBase.java:152)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at com.bea.wli.sb.transports.http.generic.RequestHelperBase.securedInvoke(RequestHelperBase.java:151)
 at com.bea.wli.sb.transports.http.wls.HttpTransportServlet.service(HttpTransportServlet.java:127)
 at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:25)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3686)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks,
Chandana

Make sure that you are using non-xa datasources and in DBAdapter outbound connection pool configuration provide the data source JNDI in "dataSourceName" property instead of "xADataSourceName" property. Update the DBAdapter after changing configuration.
Regards,
Anuj

Proxy-Generierung: Fehler aufgetreten error while gnerating Inbound proxy

Hi Experts,
1) i created outbound & inbound service interfaces with same MT.
2) when i was create the server proxy first attempt its created successfully.
3) Due to some changes in the sap pi structure ( DT ,MT,SI ). i delete the server proxy instead of regenerate proxy in SPROXY.
4) while deleting the popup window shows the only one option "delete only root object". because i used same DT,MT for both Service interface.
when i create proxy again all objects were created for the same interface but while activating the proxy gives belowerror
"Proxy-Generierung: Fehler aufgetreten"
i tried with different name for the service interface this time it gives the another error like
"un comparable parameters".
i tried for creating proxy to another interface which is in the same name space it also gives the same error.
even if create server proxy for other service interfaces which are belonging to another namespaces then i got the below error
"Authorization Check failed: S_ICF_ADM with parameters ACTVT 07"
Please advice me.
Thanks In advance
Edited by: katakoti on Oct 21, 2011 11:25 AM

problem was resolved.
we got this because when i delete the proxy i have the all authorizations for the SPROXY tcode.
like icm_auth =01,03,07....
but when recreate the proxy my roles hasbeen changed by the security team according to their new roles
in that roles i dont have authorization to create the proxy due to this i got above error.
now i got all access so it resolved

Getting Error while creating the proxy generator in Dot Net Connector 2003

Hi,
While creating the proxy generator in Dot Net Connector 2003 i am getting following error: I am successfully able to login into the SAP system and able to select the SAP tables but during the final step of proxy generator wizard i am getting following error:
----
Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
Object reference not set to an instance of an object.
OK

I have already installed the Java JVM on my machine its version is as follows:
java version "1.3.1_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
Regards,
Ravi Shah

Hi Amit,
I doing good!!!! Thanks for the response.
I uninstalled the earlier version of JVM and installed the latest version of JVM i.e. jre-1_5_0_09-windows-i586-p.
I got the proper entries under registry mentioned below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"UseJava2IExplorer"=dword:00000001
"HideSystemTrayIcon"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment]
"CurrentVersion"="1.5"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
"MicroVersion"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"MicroVersion"="0"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy]
"Country"="IN"
"PostStatusUrl"="https://sjremetrics.java.com/b/ss//6"
"EnableJavaUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start]
"CurrentVersion"="1.5.0_09"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_02]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_03]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_04]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_05]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_01]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_02]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.5.0_09]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
After installation I opened the Dot Net connector proxy client wizard . I followed the series of step during Dot Net connector configuration:
1. selected the SAP connector.
2. The next screen 'Enter Logon Information' comes where i entered the following information System as 'custom', host='IP address', Id='00' but by default it turns to '0' , client='800', user='user id' and password ='password'.
3. After clicking on Next button i am successfully logon into the SAP system.
4. The next screen in the wizard is 'selectall the remote function modules that you want to be part of your proxy object'. After selecting the SAP tables and clicked on Next button I am getting following error

Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
INFO: using logging implementation "AII Logging"
Exception in thread "main" com.sap.aii.upload.api.LoginException$WrongPassword: Invalid user/password combination
 at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:94)
 at com.sap.aii.upload.sap.SAPConnection.<init>(SAPConnection.java:38)
 at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:81)
 at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
OK

Thanks and Regards,
Ravi Shah

Error while setting up proxy

Hi,
I am getting the following error while trying to set up proxy for a user :
An error occurred while adding user proxy. Current proxy cannot be set as it is conflicting with earlier proxies with userid 121
Following is coming up in logs :
<Aug 28, 2012 8:54:28 PM CDT> <Notice> <Stdout> <BEA-000000> <<Aug 28, 2012 8:54:28 PM CDT> <Error> <XELLERATE.SERVER> <BEA-000000> <ProxyisaMultipleProxy>>
<Aug 28, 2012 8:54:28 PM CDT> <Notice> <Stdout> <BEA-000000> <<Aug 28, 2012 8:54:28 PM CDT> <Error> <XELLERATE.SERVER> <BEA-000000> <Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed>>
<Aug 28, 2012 8:54:28 PM CDT> <Notice> <Stdout> <BEA-000000> <<Aug 28, 2012 8:54:28 PM CDT> <Error> <XELLERATE.DATABASE> <BEA-000000> <Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
We are on OIM 11.1.1.3 BP6.
Please provide some help as to what is reason for this kind of behaviour.
Thanks

Hi,
We get this error due following reasons
[Considering proxy is already specified for this user]
1) Adding same user with same start & end date.
2) Adding different user with same start & end date.
Try to add different user with different start & end date.
Thanks,
Rahul

Error while generating ABAP proxy

Hi,
We created a WSDL using lotus notes (Domino) tools. While creating a proxy object using ABAP (transaction SE80), we get the error message "Cannot generate proxy (object missing in WSDL, see long text)" Message no. SPRX084.
We looked at OSS notes and applied 1046046 - Proxy generation problem with external definitions and all dependent notes as we are on a lower support pack. (WAS 6.40. SAPKB64019).
We are wondering if it is anything to do with the format/defintions in the WSDL. Can anyone send me a sample WSDL file that has been used to create an ABAP proxy object successfully. We would like compare the domino generated file. Please note that XI is not involved, we are using ABAP to call a webservice in the internal network application.
Thanks,
Girish

Hi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk

Error while running java proxy in PI 7.1

Hi All,
I had created a java proxy using nwds 7.1. This java proxy is called by XI channel and its synchronous.
WHen i run my scenario in PI i am getting a error "Error while sending message: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: No remote bean found for reference of class $Proxy2919
Kindly help me finding what can be the issue.
Regards,
Rajesh

Go to the JNDI Browser (Nwa -> Problem Management), and check if the proxy was deployed correctly with the exact name "Proxy2919".
Also, check the OSS note below.
#1292633 - JPR: Throwing "No remote bean found for reference of class"

Error While Generating the Proxy Objects

Hi All,
While Generating the Proxy Obects in SPROXY at SAP R/3 side,
Iam getting this Error
http://img169.imageshack.us/img169/5752/proxylm0.jpg
Can any one Occured this type of Error
Regards
Suman

Hi PT,
Now the Strange Issue came,
While generating the proxy objects i got that above mentioned error
After that i have run the 3 report programs according to the Ramesh Suggession
Now if i goto SPROXY means it is saying that No Conection to Integration Builder .
I have checked the RFC Destination created in SM59 of SAP R/3 of Type H.It is fine
What more i have to check
First of all when ever i open the Sropxy, every time User & pwd is requesting
Can you please through a light where to check
Regards
Suman

Error while generating client proxy

Hi All,
I have got a WSDL file for which I am generating the client proxy. It is giving me a dump saying that, memory is not sufficient while generating the proxy.
I have also contacted the basis team, even after increasing the memory... we are facing the same issue. Can anyone suggest any solution or SAP Note if there are any???
Thanks in advance.
Bhargava.

Hi,
Please find the dump details below:
ST22 DUMP:
Short text
    No storage space available for FORM stack.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
           Of course, the amount of memory (in bytes) must also be
           available on the machine (main memory or file system swap).
           Caution:
           The operating system must be set up so that there is also
           enough memory for each process. Usually, the maximum address
           space is too small.
           Ask your hardware manufacturer or your competence center
           about this.
           In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each background process.
    Other memory-relevant parameters are:
    em/initial_size_MB:         (35-1200)
           Extended memory area from which all users of an
           application server can satisfy their memory requirement
Error analysis
    You attempted to extend a stack, but the required storage spac
    not available.
    Storage request..............: 8450048 bytes.
How to correct the error
    Please check whether uncontrolled recursive calls caused this
    runtime error.
    Try to decide by analysis whether this request is
    reasonable or whether there is a program error. You should pay
    particular attention to the internal table entries listed belo
System environment
    SAP-Release 701
    Application server... "dcr"
    Network address...... "10.1.105.112"
    Operating system..... "AIX"
    Release.............. "6.1"
    Hardware type........ "00C834224C00"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 4

ALSB 3.0 error while Assign-copy proxy req 2 business req in transformation

Hi,
I'm getting the following error while i'm mapping proxy service request to business service request in split-join using 'assign,copy'
@compile time it's showing this warning.
Warning: [Assign, Copy] Element {http://www.abcd.com}objGetStateLstTyp not allowed on schema type E=getStateProvinceList|D=getStateProvinceList@http://www.abcd.com/test for From.
Hence causing the following error @runtime.
The invocation resulted in an error: [selectionFailure] Expression 'Variable getStateProvinceListRequest.parameters, nested expression ns1:objGetStateLstTyp/ns1:businessLine' returned 0 items when exactly 1 is required..
Please help.
Edited by ganeshgadi at 05/29/2008 10:20 PM

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Application error while processing DespatchDeliveryNotification_IN proxy

Hello Gurus,
I am seeking a help from you all. When I try to create ASNs using DespatchDeliveryNotification_IN proxy am getting an 'Application Error' stating 'Sender party is Invalid'. But with the same sender ID I have created so many ASNs manually. What would be exact problem?
My requirement is, I have to create ASNs using DespatchDeliveryNotification_IN, it will be called from PI system, we are passing almost all the information, in SPROXY transaction message status showing red flag which means that error. In trace I found that 'Error while processing pipeline' - 'Sender party is Invalid'. Please help me out
One more point I wanted to inform you, when I tried to execute provider class(/SCA/CL_BIF_DESDELVRY_IN) method (/SCA/II_BIF_DESDELVRY_IN~EXECUTE_ASYNCHRONOUS) from SE24 which is associated with DespatchDeliveryNotification_IN proxy, with out any input data I got an exception 'Exception /SCA/CX_BIF_DESDELVRY triggered' and message 'Application Error', So is it any way related with configurations?
Thanks in advance!!
Pallu

Hey,
Can you check the HTTP Destination is good,
Cheers
Agasthuri

Error while generating ABAP proxy client

Hi,
I want to consume a webservice.
webservice URL is http://www.w3schools.com/webservices/tempconvert.asmx?WSDL
I can import WSDL in soapUI and get the response.
But while generating proxy in SAP, ( SE80 -> Enterprise Service ->service consumer -> URL/HTTP Destination -> URL -> local object -> complete ) it throws the following error:
Exception occurred in communication framework:Error in HTTP
Framework:404conn failedhttp://www.w3schools.com/webservices/tempconvert
.asmx?WSDL
Thanks in advance,
Rajkamal

Hi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk

Error while activating ABAP proxy object

Hello,
I can see all the interfaces of PI7.0 in my ECC6.0 system.
I am able to create abap proxy object of a interface.
But when I try to activate that I am getting error as
"RFC system error for destination GTADIR_SERVER".
Pl can you suggest. appreciate quick help in this.
thanks in advance,
Sharada

Hi,
For more details take a look at note: [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
To get rid of this annoying error you have to implement the corresponding support package.
Regards,
Jakub

Error while creating the proxy object to connect to a third party tool.

Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.

do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

Error while trigerring Outbound Proxy

Similar Messages

Maybe you are looking for