Error -while updating stock in MB1C for make to order (561-E)

Hi all,
I have created a sales order with reference to quotation.
Stock is updating for Quotation number. But i stock should be updated to the sales order number.
When i am updating the stock for this sales order number, its not accepting. Its asking the preceding number.
system shows the following error,
"Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 10000001 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document."
Can anyone tell me how to solve this issue?
Thanks in advance,
Babu

solved

Similar Messages

Error while uploading stock using Mb1c and migo

Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
Thanks

Hi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore

Error while updating default media player for audio files??

Ever since I received a replacement iPod Nano for my original through the AppleCare program, I frequently get the following message while syncing podcasts:
"An error occurred while updating the default player for audio file types. You do not have enough access privileges for this operation."
How can I correct this problem?
HP Pavilion zv6000 Windows XP Athlon 64 Processor 4000+

Check out this thread for a possible resolution to your problem: http://discussions.apple.com/message.jspa?messageID=6825681

SAP posting period error while mainting stock in MB1C

Hi,
Error Description:-
While I am maintain the stock in MB1C i got an error i.e.
Error:- Postingonly possible in periods 2006/12 and 2006/11 in company code CLC1 ( CLC1 is mycompany code.)
To resolve this error I did some pre-requisite,
First :- In OB29, I define my fiscal year variant ( Here, I copied the K4 andrename S4 and save )
Second :- then, in OB37, I Assign fiscal year variant to company code.
Third :- I define variant for open postingperiod, ( Here, I define my ownvariant to use the following menu path - IMG-- FAFinancialaccounting global settingsDocuments-- Posting periods--Define variant forposting periods).
Forth:- in OB52, i define the open and close posting periods ( Here, in new entries i choose my variantwhich i define in 3rd step and define myperiods).
still system not allowing me the current dated posting, then i use the following step to resolve the error,
I mgoing to MMPV for close the periods. (here I closed all periods, month wisetill 2012/01).
stilli got the same error, so Icheck MMRV & OMSY, weather postingperiods change or not.. ( Here, systemshows me backdated posting periods i.e. 2006/12).
Kindly help me to resolve this error.
reg.Mayur

Hi,
As you Said i closed each period as well as fiscal year , but still my problem not resolved .. system shown me following notification after i closed the period..
Mode: Close period only
Client:800
Period entered (month/year):042010
Invalid period for company code CLC1; no conversion here.
Period closing complete; log issued.
Mode: Close period only
Client:800
Period entered (month/year):012012
CoCd CLC1: table T009B incomplete; no conversion here.
Period closing complete; log issued.
Mode: Close period only
Client:800
Period entered (month/year):022012
Incorrect period in control rec. of CoCd CLC1; no conversion
The current period (month/year) of the control record is122006
Period closing complete; log issued.
E N D

Budget error while issuing stock to the project based production order

Ours is project based Engineering company, we mfg euipments for the client which is part of the project.
We define separate WBS element for equipment to be manufacture & create reservation under this WBS element.
Secondly we follow production process through PP & define BOM for equipment which contains component rquired to mfg the equipment. To control cost(budget) component group wise we create separate sub WBS element for each component group(plates, motors etc) under above equipment WBS element
Kindly refer e.g.below
1. Equipment (Finished code) to be manufacture is attached on WBS MYC-210952-06-03
2. Production order(1003780) created with reference to above WBS element
3 Material procured under WBS MYC-210952-06-03-001
4. Stock available under WBS MYC-210952-06-03-001
We would like to issue material available under MYC-210952-06-03-001 to production order which is attached to WBS MYC-210952-06-03. (Tcode MB1A)
System allows to issue stock, but gives budget error.
Is it possible to transfer budget auto in the transaction MB1A itself from MYC-210952-06-03-001 to MYC-210952-06-03 or what is the best solution available for above situation.
Kindly confirm.
Thanks & regards
Sanjay Karnekar

Hi Sanjay,
You have consumed a budget at lower level WBS for material procurement. And at upper level you want to do stock transfer.
But while doing budget allocation you have distributed the budget from Upper level to lower level so there is no distributable value is avaialble at upper level for the amount of the materail stock you want to transfer.
In this either you have to keep your all budget values at upper level where your doing equipment aeembly and not distribute the budget further at lower level.
Now you alredy this so you cant do anything.
Now you have following option available with you. You have perform following activity by the given sequence.
Deactivate the Budget check by CJBW
Do your stock transfer
Do budget return by CJ38 from level WBS to upper level WBS
Now Activate the budget check by CJBV.
regards,
Pradeep

RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS

Hi Guru ,
We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
Please tell how to resolve this .
Dump part :
Runtime Errors         MESSAGE_TYPE_X
Error analysis
    Short text of error message:
    System error
    Long text of error message:
    Technical information about the message:
    Message class....... "HRTIM00BUFMSG"
    Number.............. 001
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Information on where terminated
    Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
     "INITIALIZE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 55
    of the (Include) program "LHRTIM00_TMWBUFFERCB5".

When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
      1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
      2. Have an ABAP programmer review where the RFC is failing on the Backend System
      3. Set up an External Breakpoint in the backend RFC. Step to do this:
               a. Get the Backend UserID of a test portal user that is having this issue.
               b. Ensure that test user has "Debug Display" access in the Backend System
               c. Log into the Backend system, go to SE 37 and display your RFC
               d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
               e. Set an external breakpoint any where you want in the RFC.
               f. Run the Leave request as the test user.
               g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
Regards,
Tom

Explanation on use of Strategies for Make to Order/ Make to stock scenario

Hi Gurus,
I have a scenario. In the BOM, the final Finished Product was to be made for make to order. There are two semi finished material below that. One I want to use it for make to stock and another for make to order. There is one more raw material at the bottom level which I want for make to stock. So I want to know what are the strategies I can use in the material master at all the levels for this scenario. Can anyone explain how can I do it in SAP?
Regards,
Brijesh

Dear Brijesh,
This indicator will determine the component how it should get produced either individually or collectively
Example
Fert 1 - strategy 20, requirement for this fert Via sales order is 10
Fert 2 - strategy 40 requirement for this fert Via sales order/demand management is 10
ROH is used in both Ferts and mainatined in BOM and also set to indicator 2 ( Colletive ) in MMR
ROH requiement for fert 1 -1 ( BOM )
ROH requiement for fert 2 -1 ( BOM )
after MRP system will create only 1 PR for total qty 20
If ROH is set to 1 ( individually ) then
after MRP system will create 2 PR's as 10 each
Hope it answers your query
Regards
Madhu

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

There was an error while updating row count for "SH".."SH".CHANNELS

Hi All,
Am new to OBIEE.Pls help in this regard.
Am building the physical layer as per Repository guide.When am importing the data in to this,am getting the below error.
*"There was an error while updating row count for "SH".."SH".CHANNELS" :"*
channles is the table name and having 5 rows.
but am able to see the data in the sql prompt. like SELECT * FROM SH.CHANNELS then 5 rows data would be displaying..
pls help in this regard and where is the excat problem?
Thanks,

what is the error?
Make sure that your connection pool settings are okay..
Make sure that, you are using correct driver in case of if you are using ODBC dsn..
Also make sure that, your oracle server is running... TNS and Oracle server services

"An error occurred while updating the default player for audio file types"

Getting ready for a deployment of version 9.2 of iTunes for 1400+ users.
Getting this error when a 'normal' user goes into Edit/Preferences of iTunes and makes no changes.
"An error occurred while updating the default player for audio file types. you do not have enough access privileges for this operation."
I've elevated privileges of the C:\program files\itunes directory for this user to Full Control however problem remains.
Tried to modify the folder to remove 'read-only', as found this suggestion on here, but read-only keeps applying itself.
User has full rights to the location of the media as specified under Advanced Tab. If I tick 'Set as default media player' and remove tick and then click OK I do not get the error. From what I've read it's affected older versions of iTunes also.
Doe anyone have any other suggestions?
Thanks in advance.

I had a similar issue. Turned out that - somehow - one of the directories or files in my iTunes music folder had gotten set to read only. Fixing it was easy.
Go to Edit/Preferences.
Choose the Advanced tab
in the General subtab select the contents of the box labeled "iTunes Music folder location"
Click Start, choose Run
Paste the location
Press the button to move up one level
Right-click the music folder, choose Properties
If this is your problem, the read-only box will be a solid color or checked. Set it to empty and choose the default "apply to folder and all subfolders and files." This will set everything in there readable, which after I did so I stopped getting the error.

Error while updating budget plan for a user in peoplesoft

Hi All,
We are using peopletools 845 and app 8.8 some users are getting this wl error while updating some transactions in PS find the error below,
Message from the ISAPI plugin:
Cannot open TEMP file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4' for POST of 7328 bytes: GetLastError() 5
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Message from the ISAPI plugin:
Cannot read -1 bytes of postData from tmp file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4': GetLastError() 0
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Thanks in advance!

Hi,
Try having a look at this document
E-WL: Message From the ISAPI Plugin: "Cannot read 8192 bytes of postData from tmp file" [ID 664043.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=664043.1

Re:Error while updating Warehouse List for the items in DTW..!!!

Dear SAP Members,
We have transferred the items through DTW but while updating the warehouse list for the items.i got a error message like this:
No. Status Key Reason
1 Updatefailed ItemCode cannot find this object in B1-application defined or object defined error65171
How to resolve this issue.It shows error for 600 records.It is very dfficult to enter manually.Help me on this issue.
With Regards,
Revathy

Hi Revathy,
I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
If it is one time effort you may just map them manually.
I hope I am making sense to you.
If you want us to try it out, give the name of the template, the content in the template may be few lines.

Error while updating HRA in infotype 581 for the employees.

Hi,
System is showing an error while updating HRA in infotype 581 for the employees.
The error is No Automatic updation for IT0008. Allowance Grouping not found.
What is this error. Please advice what to do in this case.

Hi Deepthi,
Check Table V_T7INA5,V_T7INA1,V_T7INA3 and V_T7INA9 also.
Check it,
Regards,
Vinod.
Edited by: vinod rao on Jul 30, 2008 1:23 PM

Error while creating inter-company invoice for stock transport

Hi ,
I am facing following errors while creating inter-company invoice for STO order.
We have scenario where standard PO is created in company code A & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
In replenishment delivery we have 10 line items. But when we try to do inter company invoice through VF01/VF04 we get following log
XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
Thanks & kind regards,
Ganesh Palatshaha

Hello
Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
If that is note the case the refer following link:
- Error VF 047 & 048 while creating Inter company billing
Regards
JP

Error while create stock without order_MB1C_Mov 521

Dear Experts,
we have creating new plant with reference to old plant. While create stock through MB1C with movement type 521, system given the error message "Busi area 1A not allowed for CoCode 1100; Check whether Busi area is blank" Message no. /EACA/GL_TOOLS006.
Please help
Regards
BK GAIKWAD

Sorry to late replay,
We have tray to use another movement, but same error message occurred. Also we have already assign the plant in OKB9 & OMJ7. please advice.
Regards
BK GAIKWAD

Error -while updating stock in MB1C for make to order (561-E)

Similar Messages

Maybe you are looking for