Error with collision

I'm having this problem is a period, and I can not solve it by. When the puppet plays in yellow object he's the error shown in the video, trouble follows me and I can not solve it at all.
Once I tried to copy and paste all the objects to the Frame 1 Frame 2, gave no mistake ... However, it is not feasible because the future has enough problems since then, but I have no ideas of what I can do to avoid.
Movie: Dropbox - demo.mp4
I use these EventListener:
[php]addEventListener (Event.ENTER_FRAME, start);
personagem.addEventListener (Event.ENTER_FRAME, enterFrame);[/php]
But I have tried to use:
[php]removeEventListener (Event.ENTER_FRAME, enterFrame);
removeEventListener (Event.ENTER_FRAME, start);[/php]
And unfortunately it did not work, could someone help me?

The error message indicates that line 33 of your code on frame 2 is where the problem arises.
The 1009 error indicates that one of the objects being targeted by your code is out of scope.  This could mean that the object....
- is declared but not instantiated
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
For the code you show, if you assign an event listener to a particular object then you need to remove the event listener from that object.  Your code does not do that for... personagem.addEventListener (Event.ENTER_FRAME, enterFrame);
removeEventListener (Event.ENTER_FRAME, enterFrame); should be
personagem.removeEventListener (Event.ENTER_FRAME, enterFrame);

Similar Messages

  • Netstat not reporting input errors with packets that have bad checksums ?

    Greetings,
    Is netstat not reporting any checksum errors ? I have a number of Macs reporting checksum errors when sniffing the local net. I would think that these should be reported by netstat as input errors, or collisions right ?
    But it doesn't currently. See below for sample, its occurring across protocols, tcp, and udp. Usually this error is a bad ethernet port or cabling, and sometimes a sw issue. Working on eliminating the switches, router, and dsl modem by doing more testing.
    But is netstat broke ? I havent seen any errors from netstat since @ 3yrs ago.
    length 64, bad cksum 0 (->f9fe)!)
    One other question, can one monitor firewire 400/800 ports or usb with netstat ? Its not listed with man pages or netstat -h
    Thanks in advance

    Im am using two commands to view the data;
    netstat -I en0 2;
    (no errors in or out)
    and tcpdump with the verbose -v argument
    ( reports the cksum ( these are CRC's right, not IP header checksum ? )
    At the very bottom is the netstat -s output, otherwise a snippet of tcpdump ; replaced the IP's with xxxx's to protect the innocent
    Thanks for your help.....
    ===========================
    18:13:37.101690 IP (tos 0x0, ttl 64, id 8134, offset 0, flags [DF], proto TCP (6), length 957, *bad cksum 0 (->68d8)!)* xxxxxxxxxx > xxxxxxxxxxxxxxx: P 8689:9594(905) ack 1 win 65535 <nop,nop,timestamp 1438111158 3084046213>
    18:13:37.136653 IP (tos 0x0, ttl 57, id 26778, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xd4bc (correct), ack 5793 win 17376 <nop,nop,timestamp 3084046248 1438111158>
    18:13:37.172381 IP (tos 0x0, ttl 57, id 26779, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xc3a0 (correct), ack 7241 win 20272 <nop,nop,timestamp 3084046284 1438111158>
    18:13:37.207358 IP (tos 0x0, ttl 57, id 26780, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xb285 (correct), ack 8689 win 23168 <nop,nop,timestamp 3084046319 1438111158>
    18:13:37.230968 IP (tos 0x0, ttl 57, id 26781, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xa395 (correct), ack 9594 win 26064 <nop,nop,timestamp 3084046342 1438111158>
    18:13:37.313545 IP (tos 0x0, ttl 57, id 26782, offset 0, flags [DF], proto TCP (6), length 1500) xxxxxxxxxx > xxxxxxxxxxxxxxx: . 1:1449(1448) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
    18:13:37.322422 IP (tos 0x0, ttl 57, id 26783, offset 0, flags [DF], proto TCP (6), length 1500) xxxxxxxxxx > xxxxxxxxxxxxxxx: . 1449:2897(1448) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
    18:13:37.322440 IP (tos 0x0, ttl 64, id 8135, offset 0, flags [DF], proto TCP (6), length 52, *bad cksum 0 (->6c60)!)* xxxxxxxxxx > xxxxxxxxxxxxxxx ., *cksum 0xaec3 (incorrect (-> 0xff42)*, ack 2897 win 65160 <nop,nop,timestamp 1438111159 3084046415>
    18:13:37.331285 IP (tos 0x0, ttl 57, id 26784, offset 0, flags [DF], proto TCP (6), length 1500) xxxxxxxxxx > xxxxxxxxxxxxxxx: . 2897:4345(1448) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
    18:13:37.334407 IP (tos 0x0, ttl 57, id 26785, offset 0, flags [DF], proto TCP (6), length 646) xxxxxxxxxx > xxxxxxxxxxxxxxx: P 4345:4939(594) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
    18:13:37.334421 IP (tos 0x0, ttl 64, id 8136, offset 0, flags [DF], proto TCP (6), length 52, *bad cksum 0 (->6c5f)!*) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., *cksum 0xaec3 (incorrect (-> 0xf5d1)*, ack 4939 win 65535 <nop,nop,timestamp 1438111159 3084046415>
    ===============================
    netstat -s
    tcp:
    7470 packets sent
    2868 data packets (671900 bytes)
    0 data packets (0 bytes) retransmitted
    0 resends initiated by MTU discovery
    3534 ack-only packets (101 delayed)
    0 URG only packets
    0 window probe packets
    657 window update packets
    411 control packets
    7918 packets received
    3225 acks (for 672008 bytes)
    185 duplicate acks
    0 acks for unsent data
    4489 packets (2652174 bytes) received in-sequence
    7 completely duplicate packets (7347 bytes)
    0 old duplicate packets
    0 packets with some dup. data (0 bytes duped)
    291 out-of-order packets (412273 bytes)
    0 packets (0 bytes) of data after window
    0 window probes
    1 window update packet
    1 packet received after close
    0 discarded for bad checksums
    0 discarded for bad header offset fields
    0 discarded because packet too short
    207 connection requests
    12 connection accepts
    0 bad connection attempts
    0 listen queue overflows
    219 connections established (including accepts)
    231 connections closed (including 9 drops)
    2 connections updated cached RTT on close
    2 connections updated cached RTT variance on close
    0 connections updated cached ssthresh on close
    0 embryonic connections dropped
    3222 segments updated rtt (of 3193 attempts)
    2 retransmit timeouts
    0 connections dropped by rexmit timeout
    0 persist timeouts
    0 connections dropped by persist timeout
    0 keepalive timeouts
    0 keepalive probes sent
    0 connections dropped by keepalive
    2199 correct ACK header predictions
    4128 correct data packet header predictions
    0 SACK recovery episodes
    0 segment rexmits in SACK recovery episodes
    0 byte rexmits in SACK recovery episodes
    0 SACK options (SACK blocks) received
    275 SACK options (SACK blocks) sent
    0 SACK scoreboard overflow
    udp:
    360 datagrams received
    0 with incomplete header
    0 with bad data length field
    0 with bad checksum
    21 dropped due to no socket
    65 broadcast/multicast datagrams dropped due to no socket
    0 dropped due to full socket buffers
    0 not for hashed pcb
    274 delivered
    390 datagrams output
    ip:
    8278 total packets received
    0 bad header checksums
    0 with size smaller than minimum
    0 with data size < data length
    0 with ip length > max ip packet size
    0 with header length < data size
    0 with data length < header length
    0 with bad options
    0 with incorrect version number
    0 fragments received
    0 fragments dropped (dup or out of space)
    0 fragments dropped after timeout
    0 packets reassembled ok
    8278 packets for this host
    0 packets for unknown/unsupported protocol
    0 packets forwarded (0 packets fast forwarded)
    0 packets not forwardable
    0 packets received for unknown multicast group
    0 redirects sent
    7869 packets sent from this host
    0 packets sent with fabricated ip header
    0 output packets dropped due to no bufs, etc.
    8 output packets discarded due to no route
    0 output datagrams fragmented
    0 fragments created
    0 datagrams that can't be fragmented
    0 tunneling packets that can't find gif
    0 datagrams with bad address in header

  • Interface Errors with connection to F5's

    We are seeing input errors on all the interfaces that connect to our F5's.
    We have checked the duplex (hard set to 100 full both ends, swapped the cable and switch interface but not changed the F5 as all the interfaces have the same issue on different F5's and Cisco switches.
    The switch is WS-C3750-24TS code 12.2(25r)SEC
    #sh int fa1/0/7 controller
    FastEthernet1/0/7 is up, line protocol is up (connected)
      Hardware is Fast Ethernet, address is
      Description: F5
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 100Mb/s, media type is 10/100BaseTX
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input never, output 00:00:00, output hang never
      Last clearing of "show interface" counters 10w5d
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 2000 bits/sec, 2 packets/sec
      5 minute output rate 3000 bits/sec, 2 packets/sec
         26162416 packets input, 2535286219 bytes, 0 no buffer
         Received 26891 broadcasts (0 multicast)
         0 runts, 21 giants, 0 throttles
         512374 input errors, 257369 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 0 multicast, 0 pause input
         0 input packets with dribble condition detected
         83195901 packets output, 1867380031 bytes, 0 underruns
         0 output errors, 0 collisions, 0 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
         Transmit FastEthernet1/0/7               Receive
       1871501261 Bytes                       2536725439 Bytes
         60868339 Unicast frames                26138764 Unicast frames
          3617974 Multicast frames                     0 Multicast frames
         18731564 Broadcast frames                 26904 Broadcast frames
                0 Too old frames              2179100855 Unicast bytes
                0 Deferred frames                      0 Multicast bytes
                0 MTU exceeded frames            1721856 Broadcast bytes
                0 1 collision frames              255003 Alignment errors
                0 2 collision frames              257388 FCS errors
                0 3 collision frames                  21 Oversize frames
                0 4 collision frames                   0 Undersize frames
                0 5 collision frames               41239 Collision fragments
                0 6 collision frames
                0 7 collision frames              412735 Minimum size frames
                0 8 collision frames             6098676 65 to 127 byte frames
                0 9 collision frames            10296716 128 to 255 byte frames
                0 10 collision frames             748567 256 to 511 byte frames
                0 11 collision frames             503169 512 to 1023 byte frames
                0 12 collision frames            8618196 1024 to 1518 byte frames
                0 13 collision frames                  0 Overrun frames
                0 14 collision frames                  0 Pause frames
                0 15 collision frames
                0 Excessive collisions                 0 Symbol error frames
                0 Late collisions                     21 Invalid frames, too large
                0 VLAN discard frames                  0 Valid frames, too large
                0 Excess defer frames              41239 Invalid frames, too small
         22585962 64 byte frames                       0 Valid frames, too small
         14550725 127 byte frames
    Has anyone seen this issue before?

    They are at different locations so it cannot be patch panel/cabling.

  • CRC error and collisions

    We discover a incrasing problem ved CRC errors and Collisions on catalyst 2950 and catalyst 3560 connected to clients (PC?s)with Gigabit NIC. Gigabit NIC?s is common on all new PC?s. The NIC?S are forced to 100 Mb half duplex and newest drivers.
    The configuration on switchport is as follow: 100 Mb half duplex
    Anybody know why ?

    The matched duplex will elimiate the collision problem. But for the CRC, there may be another issue.
    According to below link, CRC errors occur when a number of frames arrive with an invalid CRC.
    CRCs on the Ethernet are usually an indication of cabling problems. Verify whether all network cable connections are clean, and ensure there is nothing that can cause electromagnetic interference on the cabling.
    http://www.cisco.com/en/US/products/hw/wireless/ps441/products_tech_note09186a0080177aa0.shtml
    Hope this helps.

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • Odd Error with decode function in Order By Clause

    I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
    select task_id, display_date, remark_id from task_list
    where task_id > 1000
    order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
    returns the error:
    select task_id, display_date, remark_id from task_list
    ERROR at line 1:
    ORA-00932: inconsistent datatypes: expected NUMBER got DATE
    I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

    I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
    The Order by was rewritten like this:
    order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
    decode(pSort, 'Remark_ID',Remark_ID);
    Thanks

  • XML Publisher Error with reports published in XML publisher

    Hi All,
    I am geting the following error with a report published using XML Publisher
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
    How can i Rectify this?

    Hi Ark,
    In order to generate a report using xml publisher. we need the following.
    1. XML Data
    2. Template file (RTF/PDF/..)
    XML data will not be created by the template file.
    We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
    Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
    Thanks,
    K.Nataraja Suthan,

  • Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

    Hi,
    I bought Mainstage 3 for my MBP (15'' 2011).
    When i click con "perform" i get graphic errors.
    I have the same issue with the old Mainstage version since Mountain Lion.
    Also a fresh installation didn't help.
    I think i'm not the only one with this issue!
    I don't know how to report a bug?
    Perhaps someone can help me.
    (and  I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
    /forgotten ebi
    So, here an example how it looks like when i click on "perform":

    Same configuration,same problem. BUT I found a workaround.
    Mainstage has this error with the AMD video card and/or a second monitor connected.
    With a little app (http://gfx.io)  it's possible to really force the MBPro to use the Intel Graphics card.
    This will work only with the internal screen, not with a second screen connected.
    And sometimes you need to restart, to really make the Intel video card free.
    This works fine...In the meantime of a fix.

  • Error with an infoset in BI

    HI BI gurus,
    we have a problem with an infoset.
    We create an infoset in RSA1 linked to a cube and a DSO.
    We activate it in english without problems and I can create a query with no errors (with a english logon).
    If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
    Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
    Thanks for any help.
    SB

    Hi,
    is italien installed as a language in your system?
    Siggi

  • I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos.  It wont tell me which picture is the issue.

    I took a lot of pictures and video on my recent trip to Ireland.  Now I am trying to download the photos and videos from my iphone to my mac - iphoto.  I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures.  Help!!

    Try using Image Capture to download to a folder on the Desktop.  If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

  • Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

    I am learining to build CAF apps in Developer Studio in NW CE 7.1.  Here are my steps and the errors I am getting:
    Open Developer Studio
    Switch to the CA perspective
    File->New->Project
    Choose Development Component under Development Infrastructure
    Press Next
    Choose Composite Application under sap.com
    Choose MyComponents[demo.sap.com] under 'Local Development'
    Vendor: demo.sap.com
    Name: carpool
    Caption: Car Pool
    Language: American English
    Domain: SAP-xApps
    Support Component: CAF-APP (typed in, not chosen)
    Press Finish
    The following error appears:
    Status ERROR
    Plugin : com.sap.ide.metamodel.core.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Core
       Internal error  : com.sap.ide.metamodel.core.services.eclipse
       Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
       Method     : computeIdeJarProperties
       Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
       Exception  : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    at java.util.jar.JarFile.<init>(JarFile.java:132)
    at java.util.jar.JarFile.<init>(JarFile.java:70)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
    at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install. 
    Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
    The deployment of the archive failed with an exception!
    ([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
    Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
    occurred while sorting the deployment batch items regarding the
    dependencies.;nested exception is:
    com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
    denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
    found for the following deployment items:
    1. Component: name:'carpool~ear',vendor:'my.company',location:
    'localDevelopment',version:'20080501110329',software type: 'J2EE',
    dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
    'cafcoreear',vendor:'sap.com']
    Unresolved dependency:
    name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Unresolved dependency:
    name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Please check the error log for further informations.
    Again, this looks like I am missing some components.
    Any assistance is greatly appreciated.
    TB

    Further developments:  As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time.  In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated.  Does anyone know how I can change the lookup directory for this dependency (or any dependency)? 
    Thanks,
    TB

  • PeopleSoft XML Publisher report error with java.io.FileNotFoundException

    Hi,
    I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
    09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
    [012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
    [012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
         at java.io.FileInputStream.<init>(FileInputStream.java:89)
         at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
         at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
         at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
         at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
    2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
    Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
    Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
    2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
    Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
    In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
    The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.

    We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

  • When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
    if you can help me thank's
    [email address removed by host]

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • XML Publisher Error with reports

    Hi All,
    I am geting the following error with a report published using XML Publisher
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
    How can i Rectify this?
    Please update....

    Hi Darshan,
    I have done the same change what you suggested at the site level for UTF8, but its still showing the same error
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    End tag 'p' does not match the start tag 'a'. Error processing resource 'http://eyerpdev.etihad.local:8001/OA_CGI/FNDWRR.ex...
    <p class="c0"><a name="Text54" id="Text54"><a name="Text53" id="Text53"><span class="c1">From Period...
    Many thanks....

  • Error With Export/Print from Crystal Report Viewer

    Hello there,
    I've searched through the web and SAP discussion boards with not much luck with this issue.
    After working through this for some days now I've decided to look here for help.
    Environment:
    I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
    I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
    Problem:
    When I attempt to export, I receive the prompt to select format and pages.
    When I click export after selections most times I receive an error with the text
    Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
    Other times the page simply refreshes on export.
    When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
    No Print or Export document is ever created.
    As many print/export issues seems to be related, I'm guessing this two issues are as well.
    Notes:
    I am utilizing the ReportClientDocument model
    I am storing this in session to use as the crystal report viewer report source on postbacks
    I am assigning a subset of export formats to the crystal report viewer
    I am setting particular parameters as well on the report source
    At this point I would appreciate every assistance I may receive on this issue
    Thanks in advance,
    Below is the pertinent code
    Code:
    <aspx>
       <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
       AutoDataBind="true" EnableDatabaseLogonPrompt="False"
       BestFitPage="False" ReuseParameterValuesOnRefresh="True"
      CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
      ToolPanelView="None" PrintMode="Pdf"/>
    <Codebehind>
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using CrystalDecisions.Enterprise;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.Shared;
    namespace ClassicInternalReportPage
        public partial class Reports : System.Web.UI.Page
            protected override void OnInit(EventArgs e)
                base.OnInit(e);
                if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                    SessionMgr sessionMgr = new SessionMgr();
                    EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                    EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                    InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                    if (reportService != null)
                        string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                           + "Where SI_PROGID='CrystalEnterprise.Report' "
                           + "And SI_ID = {0} "
                           + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                        InfoObjects infoObjects = infoStore.Query(queryString);
                        ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                        if (infoObjects != null && infoObjects.Count > 0)
                            ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                            Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                            CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                            CrystalReportViewer1.DataBind();
                //Viewer options
                // Don't enable prompting for Live and Custom
                CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
                CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
                CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
            protected void Page_Load(object sender, EventArgs e)
                if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                    CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                    CrystalReportViewer1.DataBind();
            private bool AssignReportParameters(ISCDReportClientDocument reportSource)
                bool success = true;
                if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                    if (Request.QueryString["t"] == "2")
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
                else if (Request.QueryString["t"] == "3")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
                else
                    //Unknown report type alert
                    success = false;
                return success;

    Thanks Don for your response,
    I'm new to the SCN spaces and my content has been moved a couple of times already.
    In response to your questions
    The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
    My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
    If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
    Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
    Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
    App pool is running in 32 bit mode
    Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
    It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
    Thank you for your patience and advice,

Maybe you are looking for

  • How do I import video from digital8/hi8 to imovie?

    I have imovie 10.0.4, on a mac pro machine with mavericks.  I have a sony trv520 which is digital 8 and will read hi8 and output both over firewire.  I have a hi8 video tape. I try to import using imovie and it says, "no data from device" even though

  • How to start amp

    Hi, I have installed amp in solaris 11 . it is installed in /loca/apps/amp now my question is how to stop default apache and start Amp to run Apache,Php & Mysql.

  • Tabbing thru Radio Buttons correctly

    I am cleaning up a form. When I move from one radio button group to the next, I always go to a radio button other than the first one in the group. They aren't moving alphabetically. I have made sure that each radio button has a different value, movin

  • How can I receive my email again?

    MY IPad stopped receiving mails last Thursday.  I have tried restarting my IPad, but it did not help.

  • Specify JMS message properties with UMS send protocol ?

    Hi, is there a way to specify JMS Message properties when sending a message throught Universal Message Service (UMS) ? I was not able to find any reference to this kind of usage. Additionally, how do we specify filters (if possible) when receiving me