Error with font

Error with font as shown in the image below.
http://i1085.photobucket.com/albums/j432/Lazmarr/Firefoxfontweird2.png

Hello,
Firefox on Windows is now following display scaling options which may render text larger on high resolution displays.
You can adjust your screen resolution.
To modify it do the following:
* Type '''about:config''' into the Firefox address bar and tap on the Enter key.
* If the warning '''This might void your warranty''' appears, click '''I'll be careful, I promise'''.
* Search for '''layout.css.devPixelsPerPx'''
[[Image:Fx22layout.css.devPixelsPerPx]]
* Double-click on layout.css.devPixelsPerPx to modify its value. The default is -1.0 in Firefox 22 and above. Change it to '''1.0''' to make it work like in previous Firefox versions.
If necessary, further adjust the value in 0.1 or 0.05 steps. Use values between 1.0 and about 0.5 to reduce elements in size. Use values greater than 1.0 to increase size. For example, a value of 1.25 will increase font size to 125% to accommodate the default DPI setting in Windows 8. '''Double check the value that you enter.''' Setting a too small value will make everything disappear and a too large value will blow things up.
If web pages still need to be adjusted then you can look at the [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level] or [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension.
To adjust the font size for the user interface, you can use the [https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer] extension.
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

Troubles with fonts, graphics in firefox

I just rebooted my machine. I was trying to test a manually written grub.cfg with grub2. I screwed this up. Initially, I managed to get to a rescue shell by editing the kernel command line. I'm not sure what the correct term is - not the grub2 shell or rescue shell, I don't think, but ramfs with a sort of mini filesystem. Anyway, I replaced my backup grub.cfg and then found I didn't know how to reboot. I tried "reboot" but that did nothing and I guess there are no manuals in this shell. In experimenting, I managed to cause a kernel panic. (I think I accidentally killed init.) So I did a cold reboot. Everything now went smoothly, the system restored from the ext4 journal for the root filesystem and everything seems fine.
I am having a couple of problems. One very minor one is that Kile no longer seems to recognise .dat files as tex or latex source. I am sure I can fix this. I just mention it in case it is important to something else.
The bigger problem is that I'm seeing a lot of graphics corruption in Firefox. I've seen some of this before but it is now much worse. Also, before, it seemed tied to particular areas of a particular virtual desktop and nothing affected it. But this is tied to Firefox specifically and it changes all the time. I've never seen the location and search bar go through so many colour changes. If I reload the wiki pages, I may get ordinary coloured text or it may be rainbow coloured. I'm also getting fuzzy areas. I'm seeing a bit of this in KDE menus, too, but it seems much worse in Firefox.
More weirdly, fonts in Firefox are screwed up.
I'm not sure what font the wiki uses for ordinary text. It seems to be the same as on the forums and in this text box. In any case, all occurrences of 's' are replaced by squiggles. I am assuming my 's's will appear correctly to those reading this but in case I've mistyped or something, I am referring to the first letter of words such as 'school', 'schlep' and 'slippery slivers of silver sardines swimming surprisingly slowly'. This makes reading the wiki rather difficult. (There are a lot of 's's in it!) I was trying to find out how to reboot cleanly from the ramfs in case I end up there again.
EDIT: In Firefox, the 's' in 'fonts' in the post title (once posted) is fine. So is the 's' in 'Forums' at the top of the page. Below this text box, the 'S' in 'Smilies' is fine but the 's' is not. The 's' in 'Options' is also OK but the option appears as 'Never ~how ~milie~ a~ icon~ for thi~ po~t'!
Suggestions for the font issue would be very gratefully received. I looked through the last updates I did (today) and didn't see anything obvious but I then realised I wasn't sure what quite to look for. Here are the log entries from today:
[2012-03-25 20:35] upgraded curl (7.24.0-2 -> 7.25.0-1)
[2012-03-25 20:35] upgraded gptfdisk (0.8.2-1 -> 0.8.3-1)
[2012-03-25 20:35] upgraded kmod (6-1 -> 7-1)
[2012-03-25 20:35] upgraded libupnp (1.6.15-1 -> 1.6.16-1)
[2012-03-25 20:36] upgraded liferea (1.8.2-1 -> 1.8.3-1)
[2012-03-25 20:36] >>> Updating module dependencies. Please wait ...
[2012-03-25 20:36] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-03-25 20:36] ==> Building image from preset: 'default'
[2012-03-25 20:36] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
[2012-03-25 20:36] ==> Starting build: 3.0.25-1-lts
[2012-03-25 20:36] -> Parsing hook: [base]
[2012-03-25 20:36] -> Parsing hook: [udev]
[2012-03-25 20:36] -> Parsing hook: [autodetect]
[2012-03-25 20:36] -> Parsing hook: [pata]
[2012-03-25 20:36] -> Parsing hook: [scsi]
[2012-03-25 20:36] -> Parsing hook: [sata]
[2012-03-25 20:36] -> Parsing hook: [resume]
[2012-03-25 20:36] -> Parsing hook: [filesystems]
[2012-03-25 20:36] -> Parsing hook: [usbinput]
[2012-03-25 20:36] -> Parsing hook: [fsck]
[2012-03-25 20:36] ==> Generating module dependencies
[2012-03-25 20:36] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
[2012-03-25 20:36] ==> Image generation successful
[2012-03-25 20:36] ==> Building image from preset: 'fallback'
[2012-03-25 20:36] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2012-03-25 20:36] ==> Starting build: 3.0.25-1-lts
[2012-03-25 20:36] -> Parsing hook: [base]
[2012-03-25 20:36] -> Parsing hook: [udev]
[2012-03-25 20:36] -> Parsing hook: [pata]
[2012-03-25 20:36] -> Parsing hook: [scsi]
[2012-03-25 20:36] -> Parsing hook: [sata]
[2012-03-25 20:36] -> Parsing hook: [resume]
[2012-03-25 20:36] -> Parsing hook: [filesystems]
[2012-03-25 20:36] -> Parsing hook: [usbinput]
[2012-03-25 20:36] -> Parsing hook: [fsck]
[2012-03-25 20:36] ==> Generating module dependencies
[2012-03-25 20:36] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
[2012-03-25 20:36] ==> Image generation successful
[2012-03-25 20:36] upgraded linux-lts (3.0.24-1 -> 3.0.25-1)
[2012-03-25 20:36] upgraded perl-net-ssleay (1.42-2 -> 1.45-1)
[2012-03-25 20:36] upgraded taglib (1.7-4 -> 1.7.1-1)
[2012-03-25 20:36] upgraded whois (5.0.14-1 -> 5.0.15-1)
[2012-03-25 20:36] Exited with code 0
[2012-03-25 20:40] Exited with code 0
(END)
I am booting the standard kernel, not the lts, so the upgrade hasn't affected the kernel. I wasn't sure what libupnp did but judging by the package descriptions resulting from a pacman -Ss upnp, it doesn't seem likely to have anything to do with fonts but rather networking.
I checked ~/.xsession-errors in case Firefox was logging any errors there but I can't see anything relevant - all the errors seem to be KDE's usual prolific output.
Should I look further back? I probably didn't reboot after every previous system upgrade. Or did my messing with grub and causing a panic do some sort of damage which might be causing this? (I thought that was fairly unlikely but maybe I'm just being unduly optimistic.)
EDIT: When people post code, the 's's are OK but the 'a's and 'm's are squiggles instead.
I'm using the infinality freetype, fontconfig etc. Could that have anything to do with the problem? I didn't just install them or make any changes but might some other package have changed in a way that is incompatible with these? Or which requires some tweaking I'm not aware of?
Last edited by cfr (2012-03-25 22:43:36)

Er... my 's's have magically returned? But I have no idea why. I didn't even restart Firefox. (I'd already tried that and it made no difference.)
Would really like to know why...
EDIT: I still don't have 'm's etc. in code listings, though.
Last edited by cfr (2012-03-26 00:58:19)

Could not initialize Photoshop because of a program error" with PS CC 2014

I get "Could not initialize Photoshop because of a program error" with PS CC 2014 on a 2099 Macbook Pro running Mavericks. Then the program closes. Can anyone help?

Could be corrupt preferences, a problem with the OS font cache, or some other problem with the OS.
First, try resetting the preferences.

Error on font inside report

Post Author: gnorro
CA Forum: Administration
Hi
I have a problem with a pdf generated by CR XIwhen i try to open the pdf i get this error: "the font ArialBold cointains not valid /BBox values". then the report opens correctlycan you help me please? thanks

Post Author: gnorro
CA Forum: Administration
it happens with every font I use, but only if I use bold or italic. any suggestion? thanks

Photoshop cc error "selected font failed during last operation"

I just installed new fonts to Windows 8 PC running CC Suite with Type Kit running. When I open a previously made template in PS I keep getting photoshop cc error "selected font failed during last operation". Type kit does not show the font. The font is installed on my computer.
- The template has the original version of the font named "Adam". I downloaded the updated version now named "Adam.cg pro".
- I click on the substitution caution in the layers palette and select the new version of the "Adam" font.
- When i try to save my changes I get, error "selected font failed during last operation. If problem persists, please disable font."
Can anyone help me solve/fix this problem?
Thanks,
Brett

I just installed new fonts to Windows 8 PC running CC Suite with Type Kit running. When I open a previously made template in PS I keep getting photoshop cc error "selected font failed during last operation". Type kit does not show the font. The font is installed on my computer.
- The template has the original version of the font named "Adam". I downloaded the updated version now named "Adam.cg pro".
- I click on the substitution caution in the layers palette and select the new version of the "Adam" font.
- When i try to save my changes I get, error "selected font failed during last operation. If problem persists, please disable font."
Can anyone help me solve/fix this problem?
Thanks,
Brett

Won't OCR documents with font information

If you try to OCR a document with a mixture of scanned pages and pages with font glyphs, Acrobat will refuse the OCR the pages with fonts.
This means
(1) you can't use the "scan multiple documents" interface to OCR documents with font glyphs
(2) if you open the document in Acrobat and scan it, you need to know which pages are scanned, and which have fonts, so you can scan only the pages without fonts
Even worse, Acrobat gives you no way to figure out which pages have font glyphs on them. This is especially frustrating if you have scanned some of the pages using "Clearscan" which replaces the scan with font glyphs, but in such a way as to be nearly imperceptible. The only way to find out is to try to OCR the document (up to 4 hours for large documents on a fast computer), then write down the error message, and then try again.
I have submitted a bug report to Adobe, but will not hold my breath waiting for them to fix this one.
A
PS--The error message in Acrobat is "This page contains renderable text." Thought I should put it in so that others can search for this post.

AppleWorks in OS 10.7/10.8
AppleWorks in OS 10.7/10.8 (2)

Error with every document

Every time I open a document I get an irritating error
"Missing Font: (Master Slides: View: Tahoma..."
How do I tell keynote to just ignore this missing font and replace it with another? I have tried doing it in every document but it doesn't work.

I copied Tahoma from another machine and it fixed it. I have no clue why the font was missing, this is on a nw install of 10.4.

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

"Distiller has stopped working" when working with font managers

Don't know if this is the right forum to be posting, but there isn't a Distiller forum. I did see a post with my EXACT problem mentioned on the Distiller Server forum, to which someone disdainfully responded that the Acrobat area is where to post.
So... I've got a Vista machine, running CS3 fairly flawlessly. I get the message "distiller has stopped working" whenever browsing fonts in Font Navigator (which came with Corel X3). I thought this was unique to Font Nav, until I tried Suitcase and Font Agent Pro as other font management options. Same error message.
Firstly, I'm not clear on why distiller is running in the first place, and secondly, why messing with fonts is causing the conflict. I did find another discussion that pointed me to an update to solve the problem, but it didn't work.
Ideas?

>why distiller is running in the first place
I don't know about Vista, but in XP you use the MSCONFIG program to see what is in the startup process

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Odd Error with decode function in Order By Clause

I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
select task_id, display_date, remark_id from task_list
where task_id > 1000
order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
returns the error:
select task_id, display_date, remark_id from task_list
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got DATE
I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
The Order by was rewritten like this:
order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
decode(pSort, 'Remark_ID',Remark_ID);
Thanks

XML Publisher Error with reports published in XML publisher

Hi All,
I am geting the following error with a report published using XML Publisher
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
How can i Rectify this?

Hi Ark,
In order to generate a report using xml publisher. we need the following.
1. XML Data
2. Template file (RTF/PDF/..)
XML data will not be created by the template file.
We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
Thanks,
K.Nataraja Suthan,

Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":

Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix.

Error with an infoset in BI

HI BI gurus,
we have a problem with an infoset.
We create an infoset in RSA1 linked to a cube and a DSO.
We activate it in english without problems and I can create a query with no errors (with a english logon).
If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
Thanks for any help.
SB

Hi,
is italien installed as a language in your system?
Siggi

I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos. It wont tell me which picture is the issue.

I took a lot of pictures and video on my recent trip to Ireland. Now I am trying to download the photos and videos from my iphone to my mac - iphoto. I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures. Help!!

Try using Image Capture to download to a folder on the Desktop. If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

Error with font

Similar Messages

Maybe you are looking for