Error with Keyboard.readChar() -URGENT
Hi,
I'm using Windows and my program doesn't work at home but it works at my lab (my lab is using linux).
There's my error:
Banque.java:35: cannot resolve symbol
symbol : variable Keyboard
location : class Banque
choix = Keyboard.readChar();
I know that my code is ok, I think that's a problem of import... What can I do to resolve this problem?
Thanks!
I think you might need to copy the Keyboard.class and place it in your directory.
or if i am correct, try to use the jGRASP to complier your code, because it contain a library with the class Keyboard.
of course you have to import the Keyboard class for each time you using it.
Hope it would help
Similar Messages
-
Error with DBGET - Need Urgent Help
Hi,
I am using a query to read(DBREAD) an encrypted password from an SQL DB, and decrypting while reading as per following query:
Select test.dbo.BlowFishDecode(password,data.dbo.BlowFishKey()),EAvenue,AccountStatus from test.dbo.FMP002_EncryptPWD where
CHLDNO = $Unit_Holder_No
But when next I use DBGET function(in the successful branch of DBREAD) to assign values from the field password,EAvenue,AccountStatus to local variables, the control goes to SQL error branch.
Question: What are the possbible reasons for error. The Cisco web site says this means
"There was an error in the SQL command" . But my SQL statement is correct!!
ThanksIf I recall correctly, you have to make CRS believe there is a column somewhere in the DB with that name so DBGET allows you to select it.
There have been similar questions asked here on how to deal with stored procedures, and there have been recommendations - I think it involves creating a table in the database with a column that matches the name you use in the "AS PlainTxtPwd" clause then DBGET can see it.
See if you can find those posts.
Regards,
Geoff -
Hi friends,
[Using: Oracle Aplications 11.5.7 and DB 8.1.7]
I've just finishing a clonning process and almost everything works OK except one thing:
The X server in Database (I think)
After cloning, I've run the AOLJTEST and checked all the links, even the XServer that showed the message: X Server is accessible.
But, when I entered inside Applications, I tried to execute a request which run a report with images and it appeared an error in the log screen:
REP-3000: Internal Error starting Oracle Toolkit
I've read a lot in Metalink and in the forum about it and I've reviewed lot of files in my system, but I can't find the error.
I supossed It's in relation with the DISPLAY environment variable... but I don't know where to seek...
In the source system (from where I've done the clone process) It works OK so... the error must be in some of the initialization parameters/files/scripts that have been created in the process.
echo $DISPLAY in source system (both nodes, DB and WEB) and in Target system gives the same result:
:1
The files I've reviewed are:
- In /u01/erpbat/aeacomn/admin/scripts/MySID_WEBMachine/adrepctl.sh
I have:
DISPLAY="DBMachine:1.0"
export DISPLAY
- In /u01/erpbat/aeacomn/admin/scripts/MySID_WEBMachine/adcmctl.sh
I have too the same value
- In /u01/erpbat/aeaora/iAS/Apache/Jserv/etc/jserv.properties
I have:
wrapper.env=DISPLAY=WEBMachine:1.0
- In
/u01/erpbat/aeadb/8.1.7/appsutil/%.xml
I have:
<oa_environment type="generic_service">
<DISPLAY oa_var="s_display" osd="unix">DBMachine:1.0</DISPLAY>
</oa_environment>
and for the Application Server Node:
<oa_environment type="generic_service">
<DISPLAY oa_var="s_display" osd="unix">WEBMachine:1.0</DISPLAY>
</oa_environment>
What more files I need to see??
Any ideas ? (I hope not to need execute autoconfig.. because my customer requirements...)
(I've tried to execute xclock with root and applmgr users but without success.. I don't know how it could affect..)
I've read the following notes:
Note: 153960.1 (FAQ: X Server testing and troubleshooting)
Note: 113443.1 (Configure and Test an X Server for Running X Windows Applications)
Note: 340949.1 (How to set environment variable DISPLAY for Oracle Applications to use xserver of another machine)
Note: 181244.1 (Configuring VNC Or XVFB As The X Server For Applications 11i)
Thanks a lot
Jose.Jose,
Try using a DISPLAY port higher than 0 or 1, which are usually special DISPLAY ports reserved by the host system I have Xvfb configured on port 50, and ar60desb and bitmapped reports are running fine. Note 181244.1 also references additional parameters that need to be passed for Xvfb:
# Get a security policy file
A sample security policy file is included at the end of this document. The file is named SecurityPolicy.
If you have an existing file then add this line to the end of the policy file:
property WM_CHANGE_STATE WM_NAME ar
# Find the "fixed" font
The fixed font is a standard part of X11 distributions and is typically found in the directory
<X server installation directory>/lib/X11/fonts/misc
# To run Xvfb use a command with the following format
Xvfb :x -screen 0 6x6x8 -pn -fp <X install dir>/lib/X11/fonts/misc -sp /tmp/SecurityPolicy
Here is what I am using. The paths to fonts/misc and SecurityPolicy may be different for your OS.
nohup /usr/bin/X11/Xvfb :50 -screen 0 1024x800x8 -pn -fp /usr/share/fonts/misc/ -sp /usr/lib/xserver/SecurityPolicy &
export DISPLAY=host.domain:50.0
/usr/bin/xhost +
nohup /usr/bin/mwm &
I am also using the fully qualified hostname in the DISPLAY variables in the Xvfb startup script and the $CONTEXT_FILE. Maybe your /etc/hosts is not quite right. It should be IP longname shortname. -
Error with HFM Smartview ***** Urgent***
Hi All,
Once of the the user is trying open the Excel report send by another user by email,and he is getting the error "" One or More invalid names were detected in this workbook. Those invalid names have been changed to #ref!""
we are experiencing this issue after we upgrade the MS office to 2010.
Appreciate your quick response.
Best
Edited by: user13483952 on Apr 24, 2012 1:23 AMHi,
What is the version of Smartview?
Is the office 2010 32 bit or 64 bit?
Are you connecting to HFM application or Essbase?
And does this happen only for the particular user?
Thank you,
Charles Babu J -
Has anyone ever received the error 'Error with Console Keyboard' when installing Solaris 8?
Before Solaris prompts me to select my language I get the
error 'Error with Console Keyboard'. When Solaris prompts me for the
language I cannot select it since my keyboard no longer seems to be
working.
I have no problems with my keyboard before this step.
Any help or insight would be greatly appreciated.
Regards,
SExactly!I have the same problem when I try to install Solaris 8 on Dell CPi laptop. who else can help us? please!
-
"Error with console keyboard" in Solaris 8
Hello,
At the very beginning of Solaris8 boot I get
"Error with console keyboard"
and later OS does not react to keyboard. This non-USB keyboard.
This keyboard does work ok in PROM monitor on same
computer and this keyboard works ok with other sun box.
So this keyboard is physically OK.
When I do 'kbd -t', I get:
ioctl(kbd type): Invalid argument
What's wrong ? Can I configure the keyboard driver manually ?
Jacob LernerExactly!I have the same problem when I try to install Solaris 8 on Dell CPi laptop. who else can help us? please!
-
Error with authorisation in planning function, URGENT!
Hello,
the following error occurs in our BPS Q system:
we have an authorisation variable for different BPS functions (projection and medium-term planning), which has to guarantee that all authorised sales types will be displayed and not only these restricted in the planning folder.
This variable doesn't work correct only in ta. BPS0, i.e. it draws all sales types and not only the authorised.
It also displays an error with message no. UPC302: "Errors occurred when executing planning function ZIPF079/ZIPG079" and when executing the autorisation check log in ta. RSSM it is noticeable that program UPB_PM_START is used instead of UPB_PM_CUST_START.
Any ideas about the reason for this error?
Any help is appreciated,
regards, Martin LehmannHello CSM reddy,
you are right, one infocube in the multi area wasn't adjusted to "authorisation relevant". A colleague of mine found this out.
Thanks,
Martin Lehmann -
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Error with update my windows phone 801883f error couldn't be installed
Dear Sir,
Plz Solve this Issue ASAP
error with update my windows phone 801883f error couldn't be installed
therefore, i can't update my windows phone
SalimHi,
This error code means that the specified path couldn't be found.
To fix this issue, I suggest we try following steps and try to reinstall again:
Step 1: Clean update temp files:
1. Press Windows key + R, type service.msc and press enter.
2. Stop Windows update service.
3. Run following command lines one by one to clear update temp files:
cd %windir%
ren SoftwareDistribution SDTemp
exit
4. Restart Windows update service.
Step 2: Clear windows store catch:
Press the Windows + R keys on your keyboard to open the Run dialog.
Type WSReset.exe, and click/tap on OK.
The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
Then, please try to update Windows 8.1 again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Buggy issues with keyboard buttons.
Getting constant issues with keyboard keys in Photoshop. Delete key does not delete layer, Fill layer (Option Delete) only works when I change tools. And it does this intermittently. It's very annoying!
Anyone else have these issues? These are just some of the issues that pop up.BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Personnel Data Iview Error (It's very Urgent)
Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.Hi Ashutosh Gulkhobre,
I coppied the dump from the ST22.
Now please tell me solution fro this error ?
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 27.06.2007 09:54:55
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
"HRXSS_PER_CLEANUP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ptgsap10"
Network address...... "192.168.1.18"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PTGSAP10"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 2090448
Heap.... 0
Page.... 0
MM Used. 1208256
MM Free. 880672
User and Transaction
Client.............. 001
User................ "ESS_USER1"
Language Key........ "E"
Transaction......... " "
Program............. "SAPLHRXSS_PER_MAC"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 700
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "HRXSS_PER_CLEANUP"
Call Destination.... "ptgsap10_EC6_10"
Source Server....... "EPSAND1"
Source IP Address... "192.168.1.36"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
"HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 13
of the (Include) program "LHRXSS_PER_MACU04".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
line
1 of the (Include program "LHRXSS_PER_MACU04 ".
Source Code Extract
Line SourceCde
1 FUNCTION hrxss_per_cleanup.
2 *"----
3 ""Local interface:
4 *" EXPORTING
5 *" VALUE(MESSAGES) TYPE BAPIRETTAB
6 *"----
7
8 * CALL METHOD mac_adapter->cleanup
9 * IMPORTING
10 * messages = messages.
11
12 * TRY.
>>>>> CALL METHOD xss_adapter->cleanup
14 .
15 * CATCH CX_HRPA_VIOLATED_ASSERTION .
16 * ENDTRY.
17 IF NOT xss_adapter2 IS INITIAL.
18 CALL METHOD xss_adapter2->cleanup.
19 ENDIF.
20
21 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 13
SY-DBCNT 30
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070627
SY-UZEIT 095455
SY-XPROG SAPLHRXSS_PER_MAC
SY-XFORM HRXSS_PER_CLEANUP
Active Calls/Events
No. Ty. Program Include Line
Name
4 FUNCTION SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 13
HRXSS_PER_CLEANUP
3 FORM SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 1
HRXSS_PER_CLEANUP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 4 Ty. FUNCTION
Name HRXSS_PER_CLEANUP
MESSAGES
Table[initial]
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
XSS_ADAPTER2
F0000000
F0000000
No. 3 Ty. FORM
Name HRXSS_PER_CLEANUP
SYST-REPID
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_%_MESSAGES
Table[initial]
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
3000
SY-XPROG
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_SPACE
2
0
0
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
3000
Internal notes
The termination was triggered in function "method_call_iref"
of the SAP kernel, in line 2203 of the module
"//bas/700_REL/src/krn/runt/abmethod.c#7".
The internal operation just processed is "METH".
Internal mode was started at 20070627095455.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=24080)
When : 6/27/2007 9:54:55.565
Threads : 2
Computer Name : PTGSAP10
User Name : SAPServiceEC6
Number of Processors: 2
Processor Type: x86 Family 6 Model 11 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 6cd0
eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0549c640=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:27f2ac53=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 6408
eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0770fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:2a19e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 11.04.2005 09:27:15 21504 E
1 Prg SAPLHRXSS_SER_AUTHORITHY_CHECK 1 13.02.2005 19:00:30 16384 E
2 Prg SAPLASTAT_TRIG 2 09.09.2004 14:18:33 13312 E
3 Typ ASTAT_TYP2 0 10.11.1998 05:35:18 2048
4 Typ ASTAT_TYP1 0 30.11.1998 15:54:16 2048
5 Prg SAPLSAUTHTRACE 5 07.03.2005 08:51:05 57344 E
6 Typ USOBHASH 0 02.07.2003 13:15:24 3072
7 Prg SAPLSECH 7 05.07.2005 13:10:18 26624 E
8 Typ CVERS 0 09.11.2000 14:05:49 2048
9 Prg SAPLHRXSS_PER_MAC 9 10.02.2004 14:21:15 49152 E
10 Prg CX_SY_REF_IS_INITIAL==========CP 10 05.07.2005 13:10:16 10240 E
11 Typ SCX_SRCPOS 0 18.05.2004 14:07:11 2048
12 Prg CX_DYNAMIC_CHECK==============CP 12 05.07.2005 13:10:16 10240 E
13 Prg CX_ROOT=======================CP 13 05.07.2005 13:10:16 11264 E
14 Prg CX_NO_CHECK===================CP 14 05.07.2005 13:10:16 10240 E
15 Prg CX_SY_NO_HANDLER==============CP 15 05.07.2005 13:10:16 10240 E
16 Typ SYST 0 09.09.2004 14:18:12 31744
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00004612
\0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
246 FUNC 03 0020 LHRXSS_PER_MACU03 1
247 PAR2 02 0000 001B C000 LHRXSS_PER_MACU03 1
249 FUNC 13 0003 LHRXSS_PER_MACU03 1
250 PAR2 01 0000 0011 C001 LHRXSS_PER_MACU03 1
252 FUNC FF 0000 LHRXSS_PER_MACU03 1
253 ENDF 00 0000 LHRXSS_PER_MACU03 1
254 -
00 0000 LHRXSS_PER_MACU03 1
255 STCK 02 C001 LHRXSS_PER_MACU03 1
256 CPOP 00 0000 LHRXSS_PER_MACU03 1
257 -
00 0000 LHRXSS_PER_MACU03 1
258 FUNP 3E 0000 0011 8000 0000 8000 0000 0000 LHRXSS_PER_MACU04 1
262 FUNP 80 0000 0000 0000 0000 0000 0000 0000 LHRXSS_PER_MACU04 1
>>>>> METH 03 0000 0000 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 13
270 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 13
272 CMPS 20 024B 001B 001B LHRXSS_PER_MACU04 17
274 BRAF 05 0007 LHRXSS_PER_MACU04 17
275 METH 03 0000 0001 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 18
279 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 18
281 FUNE 00 0000 LHRXSS_PER_MACU04 21
282 -
00 0000 LHRXSS_PER_MACU04 21
Thanks and Regards,
Phanikumar -
am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.
The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.
If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
Getting Communication error with the external tax system(VERTEX_MS0018)
Hi All,
I am a new SAP HCM self learner. I am practicing it on company's sandbox system. When I am trying to create a company and saving the address, it is returning Communication error with the external tax system(VERTEX_MS0018). I have already tried to solve is issue by going thru previous related to same issue like
Communication error with the external tax system (VERTEX_MS0018) ...Urgent
but coudn't solve the issue.
Please help. Is this issue coming as I am using a training environment? any alternate approach?Hi Ravi,
To disable the connection to Vertex:
Goto tcode SPRO > Cross Application Components > Transaction Tax Engine >
Technical Settings> Define External Tax System
Here an RFC would be defined. Remove it and try again.
Also in SPRO > Cross Application Components > Tax Determination based on Jurisdiction Codes > External Tax Jurisdiction > Activate External Tax Jurisdiction.
Remove the entry 'V' here.
Regards,
Srikishan -
Powerbook 1400 bus error (with extensions) error type 10 (without ext.)
i have a powerbook 1400. bus error (with extensions) error type 10 (without extensions)
no cd. floppy is dead
the computer i put os 9 on it was a friend's 3400 witch is dead. i will see if i can get his hd.
there are no pc cards in the slots and it has os9 so removing all the ram possable including the factory ram (i only have 16 mb noram in the expansion slot eather) it will not boot. (sad mac)
the 1400 is my favorite computer
I only have a dead pb 165 (no video only sad mac sounds) and a dell (i dont like pcs so i really need to get the 1400 working) and the dell has a very bad keyboard. it likes to repeat keys alot
powerbook 1400cs/117 Mac OS 9.0.x i want a newer macmacintosh lover
It isn't what you believe that you need in the Mac so much as what its ROM tells the 1400 that it should have. Its software is integrated with what the Mac 'thinks' of itself as being, whether you use video mirroring, HDD spindown, persistent RAM Disk or any other feature that applies to PBs rather than to DTs. Why handicap the machine by omitting parts of its persona? It will be less stable, be given to unpredictable episodes of petit mal, and be downright unreliable as a result, especially if it also lacks the physical parts of its person that you mention. That is why it needs a System for its kind of PowerBook.
Grant has outlined the best method of getting a handle on the PB, which will be much aided by its having a working HDD, a functional trackpad and so on.
Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT System 6.0.8 to OS 10.4.x
Maybe you are looking for
-
How to display sub total text in ALV grid display reporting
Hi, I want to display a text 'SUB TOTAL' in Sub total row of an ALV report. Presently I am getting the name of the field used in sorting to get sub totals. But I required to display own text. Could you please give me solution. Thanks Giridhar Karn
-
Hi folks, I am trying to insert into a sql-server table within my java code: affectedRows=stmt.executeUpdate("INSERT INTO smsdss.RptJobBypassObj (TrgTable,BypassObjId,PassSeqNo,ErrBusStrDate,CharmNo,EVTS,RsnText,RslvDate,UserId) " + "VALUES(" trgTabl
-
Hi Friends , I want to know is there any way to find the list of standard reports provided by SAP in HR Module . Any transaction or any programme through which we can able to get the list . If any body have any idea on this please suggest . Thanks ,
-
Bill Generation Issue in CC&B 2.4
Hi All, I'm working on Oracle Utilities CC&B 2.4 on Windows OS. Application and Framework details are as given below: Product Name Release ID Release ID Suffix Build Number Patch Number Oracle Utilities Customer Care and Billing V2.4.0 029 0 000 Orac
-
Chose the wrong icloud back up after restoring
I restored my iPhone 5 but chose the wrong icloud back up, how can i go in and change the backup i want without restoring?