Error: "Wrong Data" in Burst Distribution using ReportServer 10.1.2.0.2

Hi All,
I have a sporadic problem with the burst distribution of ASCII-Files with ReportServer 10.1.2.0.2 and would like to know if this is fixed in 10.1.2.0.3
(I already checked the bug list, but it does not seem to be on there).
So here goes:
I have a small report which is run "pretty often", selecting data for different customers and bursting it into separate files by a so called "telebox" number as discriminator.
The report is run with the following "simple" distribution file:
<destinations>     
<foreach>
     <file id="a1" name="/&amp;&lt;gdateiname&gt;"
     format="ascii" instance="this">
     <include src="report"/>
     </file>
</foreach>
</destinations>
gdateiname is a formula column containing the telebox number calculated in the Group referenced in the "repeat on"-property of the relevant main section of the report (header and tail are empty).
This works pretty good except sporadically, files get created which are of exactly the same size, and the data contained is identical. In these cases, for example, 6 files get generated, of which 5 are correct and one is an exact duplicate (though with different filename containing the "telebox") of one of the others.
Any ideas ?
I'd greatly appreciate it, thanks in advance,...
Jens Rettig

Hello,
Your problem may be related to the bug :
bug : 4533338 : DUPLICATE FILENAME GENERATED BY RWFDTGCF_GENCACHEFILE / WRONG DATA DISTRIBUTED
This bug is fixed in Reports 10.1.2.3 (Reports 10.1.2 + patchset 3)
Regards

Similar Messages

  • Error extracting data from essbase cube using MDX method

    Hi,
    We have some problems extracting data from essbase cube using MDX method, we believe that the problem is the MDX query, this is the problem and query:
    ERROR:
    [DwgCmdExecutionThread]: Cannot perform cube view operation. Analytic Server Error(1260046): Unknown Member SELECTNON used in query
    com.hyperion.odi.essbase.ODIEssbaseException: Cannot perform cube view operation. Analytic Server Error(1260046): Unknown Member SELECTNON used in query
         at com.hyperion.odi.essbase.wrapper.EssbaseMdxDataIterator.init(Unknown Source)
    MDX:
    SELECT
    NON EMPTY {[YearTotal].[Jan]} ON COLUMNS,
    NON EMPTY {[Total Movimientos].[Presupuesto Base]} ON AXIS(1),
    NON EMPTY {[Año].[FY11]} ON AXIS(2),
    NON EMPTY {[Escenario].[Presupuesto_1]} ON AXIS(3),
    NON EMPTY {[Version].[Trabajo]} ON AXIS(4),
    NON EMPTY {[Moneda].[Moneda Input]} ON AXIS(5),
    NON EMPTY {[Centros de Costo].[1101]} ON AXIS(6),
    NON EMPTY {Descendants([Resultado Operacional],4)} ON AXIS(7)
    FROM [DSR02].[ROP]
    We try extract data using a sample cube and work fine, this is the mdx query:
    SELECT
    {[Actual],[Budget]} ON COLUMNS,
    {[Sales]} ON ROWS,
    NON EMPTY {[Product].levels(0).members} ON PAGES,
    NON EMPTY {[East].levels(0).members} ON AXIS(3),
    NON EMPTY {[Year].levels(0).members} ON AXIS(4)
    FROM Sample.Basic
    The model reversed ([DSR02].[ROP]) have the same structure than query need, the query and the model are fine, definitely we can´t see the problem, someone can help us?
    Regards

    You will be able to test the MDX query in EAS, it is usually best to test the query first before trying to use it in ODI.
    Is there any reason you are using MDX to extract the data, have you tried reportscript as I usually find it more efficient to extract the data.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Saving result from sp_executesql into a variable and using dynamic column name - getting error "Error converting data type varchar to numeric"

    Im getting an error when running a procedure that includes this code.
    I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
    DECLARE @retval AS DECIMAL(12,2)
    DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
    DECLARE @sqlcmd AS NVARCHAR(150)
    DECLARE @paramdef NVARCHAR(150)
    SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
    SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
    SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
    SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
    --default
    SET @retval = 0.0;
    EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
    SELECT @retval
    DECLARE @return_value DECIMAL(12,2)
    EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
    @SpreadKey = 1,
    @MonthNumber = 4
    SELECT 'Return Value' = @return_value
    Msg 8114, Level 16, State 5, Line 1
    Error converting data type varchar to numeric.

    Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
    to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for: 
    https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
    >> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
    This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
    the shoe size, the phone number or something else at run time of this entity. 
    In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point. 
    Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity. 
    Do you know that SQL is a declarative language? This family of languages does not use local variables! 
    Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.  
    Think about how silly this is: 
     SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
    We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental. 
    We need to see the DDL so we can re-write this mess. Want to fix it or not?
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Upload external  cap file: jcshell: Error code: 6a80 (Wrong data)?

    Hi,
    i use eclipse + NXP JCOP Plugins_Generic3.2.8_Target ,the card is jcop31v232.
    if the cap file is generated by eclipse project , when i upload exteral cap file ,no error
    but if the cap file is generated by converter command ,there is  error
    what error?help me
    cm> /terminal "winscard:4|Feitian R502 Contact Reader 1"
    --Opening terminal
    /card -a a000000003000000 -c com.ibm.jc.CardManager
    resetCard with timeout: 0 (ms)
    --Waiting for card...
    ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 33 31 56 ;.....1.EJCOP31V
    32 33 32 93 232.
    IOCTL().
    ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP31V232"> => 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
    (104154 usec)
    <= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
    01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A ...n.G.sQ..sJ..*
    86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
    02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
    0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
    2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
    04 01 2A 02 6E 01 02 90 00 ..*.n....
    Status: No Error
    cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
    cm> init-update 255
    => 80 50 00 00 08 A7 C7 04 88 8C 87 3F DE 00 .P.........?..
    (68417 usec)
    <= 00 00 93 36 01 29 05 95 13 05 FF 02 00 5F E1 48 ...6.)......._.H
    67 60 FD 2F 89 FF AD A4 72 B4 17 E9 90 00 g`./....r.....
    Status: No Error
    cm> ext-auth plain
    => 84 82 00 00 10 17 6D 1C 2A 87 9E 0A 24 3F 15 83 ......m.*...$?..
    A4 84 10 C0 75 ....u
    (71713 usec)
    <= 90 00 ..
    Status: No Errorh1.
    cm> upload -d "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
    => 80 E6 02 00 12 05 A0 00 01 00 62 08 A0 00 00 00 ..........b.....
    03 00 00 00 00 00 00 00 ........
    (56499 usec)
    <= 00 90 00 ...
    Status: No Error
    => 80 E8 00 00 FF C4 82 01 A1 01 00 0F DE CA FF ED ................
    01 02 04 00 01 05 A0 00 01 00 62 02 00 1F 00 0F ..........b.....
    00 1F 00 0B 00 15 00 2E 00 0C 00 63 00 17 00 12 ...........c....
    00 00 00 6F 00 02 00 01 00 0A 02 01 00 04 00 15 ...o............
    02 03 01 07 A0 00 00 00 62 01 01 00 01 07 A0 00 ........b.......
    00 00 62 00 01 03 00 0B 01 07 A0 00 01 00 62 03 ..b...........b.> 01 00 08 06 00 0C 00 80 03 00 FF 00 07 01 00 00 ................
    > 00 1C 07 00 63 00 01 10 18 8C 00 00 7A 05 30 8F ....c.......z.0.
    > 00 01 3D 8C 00 02 18 1D 04 41 18 1D 25 8B 00 03 ..=......A..%...
    > 7A 02 21 18 8B 00 04 60 03 7A 19 8B 00 05 2D 1A z.!....`.z....-.
    > 04 25 75 00 10 00 01 00 30 00 09 18 19 8C 00 06 .%u.....0.......
    > 70 08 11 6D 00 8D 00 07 7A 05 21 19 8B 00 05 2D p..m....z.!....-
    > 7B 00 08 03 1A 03 7B 00 08 92 8D 00 09 3B 19 03 {.....{......;..
    7B 00 08 92 8B 00 0A 7A 08 00 17 00 02 00 01 00 {......z........
    01 03 00 0A 48 65 6C 6C 6F 57 6F 72 6C 64 00 00 ....HelloWorld..> 00 00 05 00 2E 00 0B 06 80 03 00 01 00 00 00 06 ................
    > 00 00 01 03 00 .....
    >(1200 msec)
    <= 6A 80 j.
    Status: Wrong data
    jcshell: Error code: 6a80 (Wrong data)
    jcshell: Wrong response APDU: 6A80

    thank you. I use jcdk 2.2.1,jcop31v232 supports jc2.2.1 and gp2.1.1
    And i can not understand this:
    your jcop card is not a javacard v3 card.
    cm> /cap-info -p "D:\JCIDE_workspace\hello\hello\javacard\hello\hello" "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
    jcshell: Cannot read file <D:\JCIDE_workspace\hello\hello\javacard\hello.cap>: Incomplete CAP file, missing mandatory component: Header.capbut there is Header.cap in hello.cap:
    hello/javacard/Header.cap :
    01 00 13 de ca ff ed 01 02 04 00 01 09 a0 00 01
    00 62 03 01 0c 02

  • Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

    Not able to extract  performance data from .ETL file using xperf commands.
    Xperf Commands:
    xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv  –a process
    Getting following error after executing above command:
    "33288636 Events were lost
    in this trace. 
    Data may be unreliable
    This is usually caused
    by insufficient disk bandwidth for ETW lo
    gging.
    Please try increasing the minimum
    and maximum number of buffers
    and/or
                    the buffer size. 
    Doubling these values would be a good first at
    tempt.
    Please note, though, that
    this action increases the amount of me
    mory
                    reserved
    for ETW buffers, increasing memory pressure on your sce
    nario.
    See "xperf -help start"
    for the associated command line options."
    I changed page size file but its does not work for me.
    Any one have idea, how to solve this problem and extract ETL file data.

    I want to mention one point here. I have total 4 machines out of these 3 machines above
    commands working properly. Only one machine has this problem.<o:p></o:p>
    Hi,
    I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
    Refer to following articles:
    start
    http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
    Using Xperf to take a Trace (updated)
    http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
    Kate Li
    TechNet Community Support

  • Error writing data in a flat file using UTL_FILE feature

    Hi All,
    I have written a package which fetches data from four different cursors and inserts into a temporary table.
    Now this temporary table is used to write data in a file using the UTL_FILE feature.
    fhandler :=
    UTL_FILE.fopen (l_path,'Demand_Transactions_'
    || TO_CHAR (SYSDATE, 'YYYYMMDDHH24MI')
    || '.txt',
    'w',
    max_linesize => 32767
    This table has 62593 records and when it starts writing data into the file from the table it errors out after writing 30045 records with the error - ORA-01722: invalid number.
    Can anyome please advise me is it because of the max_linesize => 32767. If not then what can be the possible reason.
    Any help in this would be highly appreciated.
    Regards,
    Shruti

    891330 wrote:
    Hi All,
    I have written a package which fetches data from four different cursors and inserts into a temporary table.
    Now this temporary table is used to write data in a file using the UTL_FILE feature.
    fhandler :=
    UTL_FILE.fopen (l_path,'Demand_Transactions_'
    || TO_CHAR (SYSDATE, 'YYYYMMDDHH24MI')
    || '.txt',
    'w',
    max_linesize => 32767
    This table has 62593 records and when it starts writing data into the file from the table it errors out after writing 30045 records with the error - ORA-01722: invalid number.
    Can anyome please advise me is it because of the max_linesize => 32767. If not then what can be the possible reason.Max linesize is the number of characters in a line before a newline has to be issued, not the number of rows written.
    The error would indicate that you have a character to number conversion going on somewhere but the characters are not numeric so it's failing that conversion.
    This doesn't sound like a UTL_FILE issue, but more to do with how you are building up your strings to output to the file.
    You would need to show us your code that builds up the lines you are writing out, with details of the datatypes of any of the columns/variables included in that.

  • WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

    I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
    [ToolboxItemAttribute(false)]
    public partial class VisualWebPart1 : WebPart
    // Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
    // the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
    // for production. Because the SecurityPermission attribute bypasses the security check for callers of
    // your constructor, it's not recommended for production purposes.
    // [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
    public VisualWebPart1()
    protected override void OnInit(EventArgs e)
    base.OnInit(e);
    InitializeControl();
    using (SPSite site = new SPSite(SPContext.Current.Site.Url))
    using (SPWeb web = site.OpenWeb())
    SPList list = web.Lists["Pages"];
    web.AllowUnsafeUpdates = true;
    foreach (SPListItem items in list.Items)
    items["Author"] = "SharePoint";
    items["Created"] = "01/08/2014 01:44 PM";
    items.Update();
    list.Update();
    web.AllowUnsafeUpdates = false;
    protected void Page_Load(object sender, EventArgs e)
    but when i try adding this web part to a page i got the following error:-
    Invalid data has been used to update the list item.The field you are trying to update may be read only
    so can anyone advice?

    i only changed lines bitween 
    web.AllowUnsafeUpdates = true;
    and
    web.AllowUnsafeUpdates = false;
    and other parts of code remains without change
    so it will updates all pages in current web
    yaşamak bir eylemdir

  • Error reading data from Infocube using shell script.

    Dear all ,
    I am facing a problem while reading data from an infocube using a shell script.
    The details are as follows.
    One of the shell script reads the data from the infocube to extract files with the values.
    The tables used for extraction by the shell script are :
    from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
           SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
           SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
           SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
           SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
           SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
           SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
           SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
           SAPR3."/BIC/MCCPROD"      MCCPROD,
           SAPR3."/BIC/SCCPROD"      SCCPROD,
           SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
           SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
           SAPR3."/BIC/SORGUNIT"     SORGUNIT,
           SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
    /*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
           SAPR3."/BI0/SREQUID"      SREQUID,
           SAPR3."/BI0/SCURRENCY"    SCURRENCY,
           SAPR3."/BIC/SSCENARIO"    SSCENARIO,
           SAPR3."/BIC/SSOURCE"      SSOURCE
    The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
    I used RSRV to get the info about these tables for the infocube:
    Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
    Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
    and so on for SID = 39  and SID = 35 .
    Checking of SID table /BIC/SCUSLEVEL2 produced errors
    Checking of SID table /BIC/SCUSLEVEL3 produced errors
    Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
    Also , Please let me know how to proceed with this issue.
    Kindly let me know for more information, if required.
    Thanks in advance for your help.
    -Shalabh

    Hi ,
    In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
    Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
    PARTITION BY: RANGE
    COLUMN_LIST: KEY_ABACOPA
    and subsequently there are partitions with data in it.
    I need to understand the details of these partitions .
    Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
    Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
    Kindly help.
    Thanks for your co-operation in advance.
    -Shalabh

  • I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

    Hi all,
    I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
    I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
    Thanks in advance!

    Most of the documents have sensitive info on them.  I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
    Thanks for you help.

  • BO XI R2 WEBI Error(A wrong url parameter has been used to access this page)

    Post Author: Ayyappan Sadhasivam
    CA Forum: Migration to XI R2
    I am working BO XI R2 WEBI Reports, I cannot able to see the sql query of all report, I am getting following error in WEBI report panel Query- HTML
    "A wrong url parameter has been used to access this page" Let me know anybody know the solutions

    Post Author: Ayyappan Sadhasivam
    CA Forum: Migration to XI R2
    I am working BO XI R2 WEBI Reports, I cannot able to see the sql query of all report, I am getting following error in WEBI report panel Query- HTML
    "A wrong url parameter has been used to access this page" Let me know anybody know the solutions

  • Error  when trying to enter data in the textarea using settext in 9.3

    not allowing to enter data in the textfield using settext and throwing below error
    Cause: oracle.forms.handler.TextAreaItem cannot be cast to oracle.forms.handler.TextFieldItem

    I had the same problem.I think this is a bug with 9.3.The workaround I used was to record: click the Text Area,go to Functions menu->edit->Edit,enter the text.Stop recording.Then you can playback.

  • Error when reading data in to ArrayCollection using HTTPService

    Hi,
    I am trying to read data in to ArrayCollection using HTTPService result property:
    [Bindable] private var myData:ArrayCollection=new ArrayCollection();
       private function result_handler(e:ResultEvent):void
            myData = e.result.root.contact;
      <mx:HTTPService id="post_submit"
           url="test.php"
           method="POST"
           result="result_handler(event)"
           fault="fault_handler(event)">
           <mx:request xmlns="">
           </mx:request>
       </mx:HTTPService>
    I am getting the following error when there is no "contact" record in the xml root:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    Also I am getting the following error when there is only ONE  "contact" record in the xml root:
    TypeError: Error #1034: Type Coercion failed: cannot convert mx.utils::ObjectProxy@280c9ca1 to mx.collections.ArrayCollection.
    And it works fine when there is two or more "contact" records in the xml root.
    Am I missing something?
    Thanks

    I am getting the following error when there is no "contact" record in the xml root:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
         You'll be getting this error because it's trying to access nodes that don't exist;
         there are no 'contact' records, thus when it tries to access node 'root.contact', it doesn't exist, hence it's receiving NULL when it's expecting      something
    Also I am getting the following error when there is only ONE  "contact" record in the xml root:TypeError: Error #1034: Type Coercion failed: cannot convert mx.utils::ObjectProxy@280c9ca1 to mx.collections.ArrayCollection.
    And it works fine when there is two or more "contact" records in the xml root.
    Am I missing something?
    Thanks
          When there is only 1 value, it'll be returned as an object (Arrays are used for multiple items). So it throws an error as it isn't expecting a single           object, it wants an Array.
         This is also why when it returns 2+ records, there is no error. Multiple results will be returned as an Array, what your flex app was expecting.
         My initial guess to solve the first problem would be similar to Greg's, although i'm guessing you'd want;
        if(e.result != null){
         instead of
         if(e.result.root.contact != null){
        as you'd initially want to check if anything was returned in the result, rather than checking to see if a certain node exists.
         If you attempt to see if a certain node isn't null, and the node doesn't exist, it'll probably throw another #1009
         For the #1034 error, you'll have to check to see how many results were returned, as Madhav has described for you.

  • Tecra A10 - Wrong date and error messages

    Hello, Toshiba Tecra A10, PTSB0A-002001 running XP pro,
    I keep getting the wrong date & error messages on my laptop when I leave my laptop for long periods off without charging, so I guess that the Cmos battery is no good, so I am asking: what is cmos battery number and where can I purchase one?
    Thanks

    Hi joe75,
    Before you exchange the CMOS battery: Leave the AC/DC adapter connected for at least 24 hours. During this procedure the CMOS battery will be recharged and the notebook should be able to store the correct date & time settings again.
    Check this!!!

  • Error invalid date using  delete_filter_exp  in Ikm knowledege module netez

    i created the a,b,final-r-interfaces in ORACLE DATA INTIGRATER(ODI).pkg level these three interfaces are executed successfully in developement.
    when i executed the final-that r-interface alone in development then it shows the error (i.e.invalid date)
    Note i am using the delete_filter_exp in Ikm knowledege module netezza control append i am using this conditon in this delete_filter_exp in Ikm knowledege module netezza control append (HIST_CREATION_DATE>= TO_DATE(substr('#D_abc_vb_O_LINES_HISTORY_RK',1,19) ,'MM/DD/YYYY HH24:MI:SS') AND SOURCE_ID=3)
    I am getting the error as .invalid date.
    Regards,
    Venkat

    hi,
    the data types like typ_s_ressource are defined.
    they are declared in the include LZTPGTOP.
    The declaration of typ_s_ressource is:
    types: begin of typ_s_ressource,
            perno type hrsobid-sobid,
            org_unit type objid,
            position type hrsobid-sobid,
            leadpos type c,
           end of typ_s_ressource.
    If u have any questions, you can ask me, but try to provide a solution.
    Thanks,
    Srinivas.

  • Error building project using kXML2 - "Class loading error: Wrong name"

    Hi,
    I'm testing the XML-Parser KXML2 and downloaded the latest package, but the minimal version (kxml2-min.zip). I put this file into the directory "%j2mewtk%\apps\KxmlTest\lib" and wrote the lines
    import org.kxml2.io.*;
    import org.xmlpull.v1.*;
    When I try to build the project with the Wireless Toolkit (v1.04) it spits out the following error:
    Error preverifying class kxml2.io.KXmlParser
    Class loading error: Wrong name
    com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
    Build failed
    I also tried the full package "kxml2.zip" but the same error occurs.
    How can I get rid of this? Thanks in advance!

    Okay, finally worked it out (hopefully). I unpacked the archive to a directory (say "%J2MEWTK%\apps\KxmlTest\tmpclasses") and then preverified them "manually":
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.kxml2.io.KXmlParser
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParser
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParserException
    Then I packed them again to a jar-file:
    %J2SDK%\bin\jar.exe -cvf kxml2-min.jar %J2MEWTK%\apps\KxmlTest\tmpclasses\output\.
    That was all!

Maybe you are looking for