ERROR WSNAT_CAT:1287 When Reading from file

Hi,
I'm new in Tuxedo and hope you understand my lack of knowledge
During an execution of a procedure that reads from a file in the server it shows the error in ULOG:
"121620.prod240!WSH.22478.1.0: WSNAT_CAT:1287: WARN: Forced shutdown of client; user name ''; client name ''; workstation address '//192.168.1.8:6386677'"
after reading/inserting the first record.
I alter the file, erase that first record and execute the proc. In some cases it reads all the file or just another record, so i have to alter the file again
After some attempts, it runs fine and reads all the records remaining.
The version of Tuxedo 8.1
The file may have as much as 50 records.
Any suggestion will be appreciated

Hi,
Does the WSNAT_CAT:1287 error message occur every time? I don't see how that error message relates to what you are doing as it basically says that a workstation client timed out which is likely due to client inactivity and isn't related to your service. If timing out your client is an issue, try setting or changing the -T option on the WSL.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

  • Changing value when reading from file

    When I am reading from a text tab-delimited file labview is returning a changed value. For example, the value should be 337478.47 but labview is returning 336727. I have tried changing the array to EXT, it is currently DBL, and that didnt seem to change anything.
    I am using LabView 8.
    Attachments:
    read_from_file2.vi ‏25 KB
    test data.txt ‏5 KB

    Your numbers are fine. Just right-click on your indicators and select the desired format and precision. (By default, it only shows 6 significant digits).
    See if this works.
    LabVIEW Champion . Do more with less code and in less time .

  • CX_SY_CONVERSION_CODEPAGE - Error when reading from file in unix directory

    Hi
    We have a custom report which reads data from a file put in the unix directory. This report has been running for good 3 years now without any code changes.
    For a few days the report is dumping with the following error
    CX_SY_CONVERSION_CODEPAGE
    Short text
        Character set conversion is not possible.
    What happened?
        When converting a text from code page '4110' to code page '4102',
        the system either
        - encountered a character which cannot be represented in one of
          the two code pages; or
        - found that this type of conversion is not supported.
    The code where the dump occurs is:
    load the file from the given path
      OPEN DATASET  p_p_lfdata FOR INPUT IN TEXT MODE ENCODING DEFAULT WITH SMART LINEFEED.
      IF sy-subrc EQ 0.
        DO.
    >>>>>>>>      READ DATASET  p_p_lfdata INTO  l_rec. " Dump occurs here
          IF sy-subrc = 0.
    I understand this error is thrown in the OPEN DATASET statements in case of non-unicode compliance, but this statement does not throw an error while the READ DATASET statement does..... Any particular reason why the READ statement is failing even though OPEN is successful???

    Hi,
    you open the according file in DEFAULT mode. I assume you do this on a Unicode system.
    Then the program assumes that the file is encoded in UTF-8 (SAP number 4110).
    Now it seems that the file contains some characters, which are not encoded in UTF-8.
    I would propose to investigate the code page, on which the file is created.
    Ideally this should be UTF-8. If this is not the case, try to change it.
    If this is not possible, then adapt the ABAP program (e.g. use Non-Unicode mode).
    Best regards,
    Nils Buerckel

  • When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • "Lightroom encountered and error when reading from its preview cache and needs to quit"

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
    Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
    Your thoughts?
    --Kenny Brandon Wilson

    Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
      Gokul: Click on start and type %appdata%, then open roaming folder.
      Edward: ok
      Gokul: Open Adobe folder.
      Gokul: Open Lightroom folder.
      Gokul: Open Lightroom folder> Preferences.
      Edward: ok
      Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
      Edward: OK
      Gokul: Please check if you can launch Lightroom without any error.
      Edward: it shows me a welcome screen and is asking me to select my country
      Edward: aka, register the software
      Gokul: You can skip and launch it.
      Edward: LR catalog not found
      Gokul: Please select the catalog.
      Edward: my original catalog?
      Gokul: Yes.
      Edward: testing integrity of catalog
      Edward: loaded just fine
      Gokul: Okay.
      Gokul: Please check if you can re-launch it again.
      Edward: yes, it worked!
      Gokul: Excellent!
      Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
      Edward: aha....ok
    All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

  • Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and..."

    Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and needs to quit.  Lightroom will attempt to fix this problem the next time it launches."
    I've tried renaming my catalog.lrcat file.  I've copied over my most recent backup of the catalog.lrcat and that didn't work either.

    On Mac:
    PS - to open the previews "folder" (a "package" is just a "special" folder) on Mac, ctrl-click and choose "Show package contents.." - same way you open any other special folder, like .app or .lrplugin..
    Rob

  • Lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite

    lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite
    it also says it will attempt to to fix the next time it opens it doesn't do anything

    Check this thread. Your Previews Cache files are corrupted.
    Re: preview cache?

  • Lightroom encountered an error when reading from its preview cache and needs to quit.  Says Lightromm will attempt to fix the problem the next time it launches, but on every re-launch I get the same message.  Any clue as to how to fix this problem?

    I recently updated my HP laptop's OS from WIndows8 to WIndows8.1.  When I went attempted to open Lightroom5 I got the following message:
    "Lightroom encountered an error when reading from its preview cache and needs to quit. "
    "Lightroom will attempt to fix the problem the next time it launches"
    Every time I relaunch I  get the same message.  I'd like to understand what might be causing the problem so I can remedy and get back to my photo editing. Any clue as to how to fix this problem would be greatly appreciated.
    JPM

    reset your preferences, Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums

  • When backing up lightroom 4 catalog, get message "lightroom encountered an error when reading from its preview cache and needs to quit" this occurs during optimization stage of backup

    i upgraded from lightroom 4 to lightroom 5 and installed it on a separate hard drive. Initially had no problems util my computer crashed due to the failure of the drive on which Lightroom 5 was installed. Since having my computer rectified, i am unable to use lightroom 5 getting the message "lightroom encountered an error when reading from its preview cache and needs to quit"
    I can still use lightroom 4, however, i get the same message when i try to backup the catalog. This occurs during the optimisation phase of backup.
    I suspect it is related to Lightroom 5 creating a catalog from the Lightroom 4 files and cannot now locate those files or that they have been corrupted.
    Would appreciate any solutions / suggestions.

    You need to delete your preview cache and have Lightroom rebuild it.   Cache location can be found here.
    https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    Why And How To Clear Your Lightroom Cache - Lightroom Fanatic

  • Lightroom encountered an error when reading from its preview cache and needs to quit.  Lightroom will attempt to fix this problem the next time it launches"."

    Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."Help
    Please

    Stan Blumberg wrote:
    I have deleted the file but the message persists even after restarting the computer....any advice??...I am using LR 5
    You don't delete a file, you have to delete a folder. Is that what you did?
    If you deleted the folder specified above, and you still get the message, then it's the wrong folder. Use your operating system's search function and find ALL folders on ALL disks whose name ends with Previews.LRDATA, delete each one found, and then try opening Lightroom.

  • When I tried to open Lightroom 5.4 today I got a msg that says "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each ti

    "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each time I try to open it.

    It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.

  • Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit".  Please advise on how to fix this error.  Thanks

    Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit".  Please advise on how to fix this error.  Thanks

    You probably need to delete your preview cache.  See here  
    Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
    Preference and other file locations in Lightroom 5

  • Lightroom encountered an error when reading from its preview cache. helping a friend..

    Im not a lightroom user. even though I have some version 4. I use acdsee pro 6. but my friend has the 5.6 CC version but has a language issue so im trying to help me. basically will guide him over the phone.
    he was editing a wedding, the computer crashed. he rebooted, lightroom came with the preview cache error. he rebooted again..same issue. he did a repair but to no avail. he tried installing an older version in parralel but no success.
    what exactly does he need to do. im not a light room user. I use PS CS6 but not LR.
    anybody can help to help him. I did read some posts and it noted about thumbnail previews and removing or erasing/renaming
    1- where is this file located please?
    2-are there many of these ? and how do I know which is the one he needs to choose?
    thank you for your help.

    See answer at Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

  • LRCC Error: Lightroom encountered an error when reading from its preview cache and needs to quit.

    I just upgraded from LR 5.7.1 to LRCC a couple of days ago.  After working with a collection of images in Lightroom CC, this message popped up: "Lightroom encountered an error when reading from its preview cache and needs to quit."  What do I need to do to remedy this?  Thanks!

    Quit Lightroom
    Then trash the preview cache. It’s in the main catalog folder.
    Delete the folder with the ending Previews.lrdata
    The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
    Re-launch Lightroom after deleting the Previews folder.
    N.B. do not touch files ending .lrcat

  • Help.."Lightroom encountered an error when reading from its preview cache and needs to quit"..

    Can some one please help me with this error message I keep getting.  I was told to uninstall LR and reinstall it and I am still getting the same error message.  "light room encountered an error when reading from its preview cache and needs to quit"..

    Go to the folder containing your catalog, and delete the folder that ends in .lrdata. Then start Lightroom, and it will create a new preview file, and you should be good to go.

Maybe you are looking for

  • Inventory posting list report not shown transaction data

    Dear Viewer, As my english is not good inspite of this i am trying to give you detail where i have stucked in SAP. As you know there is some standred report in SAP .inventory report is one of them. when i am going to see inventory posting report in i

  • When viewing a PDF in the Preview app can I show the PDF in the Finder?

    Hi, if I open a PDF in Preview, usually from Safari I cannot then find away of showing the PDF in the Finder. Usually with these PDFs, say I have opened a bank statement, I like to 'Move to' and 'Rename', both which I can do from in Preview but I the

  • Is it possible to receive a response message from a output PO process?

    Hi everybody. We are doing a PO interface between SRM and external system via XI. When we create a PO in SRM we send it to XI using sproxy (PurchaseOrderRequest_Out message). But the external system always send back a response. Are there any way to c

  • Setting field header width in table control

    I have created  a table control by using the wizard and i am populating my internal table data in to this. Here i have small issue. There are two fields called recoverable, identifiable with char (1). These two field headers are displayed as R, I on

  • Order Management Ship-To location

    Hi, I am new to OM module and We are implementing OM for our client and i came through a scenario for which i need to do the setups. Scenario goes like this, my client's customer do a Dropship in his business process. when ever he get an order he pla