Errors in binary data
Hi
I am getting some errors in the binary data I am reading over a serial link using the vi attached.
The vi removes the first seven characters (which are not part of the data string) then converts the binary data to an array of unsigned 16 bit integers.
There is a regular pattern to the error- every 10th number in the array has an error.
I am very confused and was wondering if anybody has experienced a similar problem.
Many thanks
Ash
Attachments:
Read binary data.vi 87 KB
Hi,
so are you saying that if you set the instrument you're talking to to return the hex data as ascii versions (i.e. the text "002D" = a 4 byte transmit, rather than 002D a 2byte transmit (or two characters) you get the correct expected data?
As we can see from the data you've included, the 00's are there in the actual original data set, which I'm guessing is why Altenbach was asking if that was the numbers you were expecting.
The start of your actual read string is (using the slash code view) \r\nbin,\00\00,v$v\16 so to get to the first element, you need to skip the first 8 characters to be left at the ,v as the first word you're dealing with. You're currently skipping to position 7 which is \00, or 44 in hex as a word.
Is the ,v definitely the first word, or is it the v$ or the \00v and if you say that the message is
bin,<first word msb><first word lsb>...<last word lsb><CR>
then you should probably do a search for "bin," and work from the offset instead. That means your first two data elements would be 00 (or 0 as a word) then the ,v
The alternative would be to assume the \r\n on the end, and stipr that off the message. Reverse the string, and then typecast. Swap the byte order in the array of U16's, and then reverse the array again. Sounds like you're not gaining anything, but if the instrument definitely transmist as you have put it, then you would be guaranteeing the integrity of the message in words (2 bytes). (When I did this on your message, I got the same as your strip method of pulling off the first 7 elements)
Would that make more sense? What is the source of the message?
Thanks
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Similar Messages
-
I am facing a strange SQL exception:-
The code flow is like this:
.Net 4.0 --> Entity Framework --> SQL 2008 ( StoredProc --> Function {Exception})
In the SQL Table-Valued Function, I am selecting a column (nvarchar(50)) from an existing table and (after some filtration using inner joins and where clauses) inserting the values in a Table Type Object having a column (nvarchar(50))
This flow was working fine in SQL 2008 but now all of sudden the Insert into @TableType is throwing "string or binary data would be truncated" exception.
Insert Into @ObjTableType
Select * From dbo.Table
The max length of data in the source column is 24 but even then the insert statement into nvarchar temp column is failing.
Moreover, the same issue started coming up few weeks back and I was unable to find the root cause, but back then it started working properly after few hours
(issue reported at 10 AM EST and was automatically resolved post 8 PM EST). No refresh activity was performed on the database.
This time however the issue is still coming up (even after 2 days) but is not coming up in every scenario. The data set, for which the error is thrown, is valid and every value in the function is fetched from existing tables.
Due to its sporadic nature, I am unable to recreate it now :( , but still unable to determine why it started coming up or how can i prevent such things to happen again.
It is difficult to even explain the weirdness of this bug but any help or guidance in finding the root cause will be very helpful.
I also Tried by using nvarchar(max) in the table type object but it didn't work.
Here is a code similar to the function which I am using:
BEGIN
TRAN
DECLARE @PID
int = 483
DECLARE @retExcludables
TABLE
PID
int NOT
NULL,
ENumber
nvarchar(50)
NOT NULL,
CNumber
nvarchar(50)
NOT NULL,
AId
uniqueidentifier NOT
NULL
declare @PSCount int;
select @PSCount =
count('x')
from tblProjSur ps
where ps.PID
= @PID;
if (@PSCount = 0)
begin
return;
end;
declare @ExcludableTempValue table (
PID
int,
ENumber
nvarchar(max),
CNumber
nvarchar(max),
AId
uniqueidentifier,
SIds
int,
SCSymb
nvarchar(10),
SurCSymb
nvarchar(10)
with SurCSymbs as (
select ps.PID,
ps.SIds,
csl.CSymb
from tblProjSur ps
right
outer join tblProjSurCSymb pscs
on pscs.tblProjSurId
= ps.tblProjSurId
inner join CSymbLookup csl
on csl.CSymbId
= pscs.CSymbId
where ps.PID
= @PID
AssignedValues
as (
select psr.PID,
psr.ENumber,
psr.CNumber,
psmd.MetaDataValue
as ClaimSymbol,
psau.UserId
as AId,
psus.SIds
from PSRow psr
inner join PSMetadata psmd
on psmd.PSRowId
= psr.SampleRowId
inner join MetaDataLookup mdl
on mdl.MetaDataId
= psmd.MetaDataId
inner join PSAUser psau
on psau.PSRowId
= psr.SampleRowId
inner
join PSUserSur psus
on psus.SampleAssignedUserId
= psau.ProjectSampleUserId
where psr.PID
= @PID
and mdl.MetaDataCommonName
= 'CorrectValue'
and psus.SIds
in (select
distinct SIds from SurCSymbs)
FullDetails
as (
select asurv.PID,
Convert(NVarchar(50),asurv.ENumber)
as ENumber,
Convert(NVarchar(50),asurv.CNumber)
as CNumber,
asurv.AId,
asurv.SIds,
asurv.CSymb
as SCSymb,
scs.CSymb
as SurCSymb
from AssignedValues asurv
left outer
join SurCSymbs scs
on scs.PID
= asurv.PID
and scs.SIds
= asurv.SIds
and scs.CSymb
= asurv.CSymb
--Error is thrown at this statement
insert into @ExcludableTempValue
select *
from FullDetails;
with SurHavingSym as (
select distinct est.PID,
est.ENumber,
est.CNumber,
est.AId
from @ExcludableTempValue est
where est.SurCSymb
is not
null
delete @ExcludableTempValue
from @ExcludableTempValue est
inner join SurHavingSym shs
on shs.PID
= est.PID
and shs.ENumber
= est.ENumber
and shs.CNumber
= est.CNumber
and shs.AId
= est.AId;
insert @retExcludables(PID, ENumber, CNumber, AId)
select distinct est.PID,
Convert(nvarchar(50),est.ENumber)
ENumber,
Convert(nvarchar(50),est.CNumber)
CNumber,
est.AId
from @ExcludableTempValue est
RETURN
ROLLBACK
TRAN
I have tried by converting the columns and also validated the input data set for any white spaces or special characters.
For the same input data, it was working fine till yesterday but suddenly it started throwing the exception.Remember, the CTE isn't executing the SQL exactly in the order you read it as a human (don't get too picky about that statement, it's at least partly true enough to say it's partly true), nor are the line numbers or error messages easy to read: a mismatch
in any of the joins along the way leading up to your insert could be the cause too. I would suggest posting the table definition/DDL for:
- PSMetadata, in particular PSRowID, but just post it all
- tblProjectSur, in particularcolumns CSymbID and TblProjSurSurID
- cSymbLookup, in particular column CSymbID
- PSRow, in particular columns SampleRowID, PID,
- PSAuser and PSUserSur, in particualr all the USERID and RowID columns
- SurCSymbs, in particular colum SIDs
Also, a diagnostic query along these lines, repeat for each of your tables, each of the columns used in joins leading up to your insert:
Select count(asurv.sid) as count all
, count(case when asurv.sid between 0 and 9999999999 then 1 else null end) as ctIsaNumber
from SurvCsymb
The sporadic nature would imply that the optimizer usually chooses one path to the data, but sometimes others, and the fact that it occurs during the insert could be irrelevant, any of the preceding joins could be the cause, not the data targeted to be inserted. -
Errors and exceptions in writing large binary data on sockets!!! urgent
hi
I am trying to write large binary data in the form of byte arrays on sockets.
Data is as large as 512KB(== 524288bytes) So i store the data (actually read from a file through FileInputStream ) and then write on the socket with lines like this
DataOutputStream dos =
new DataOutputStream(new BufferedOutputStream(sock.getOutputStream()));
dos.write(b);
/* suppose b is the arrayreference in which data is stored. sometimes i write with that offset + len function*/
dos.flush();
dos.close();
sock.close();
but the program is not stable: sometimes the whole 512KB is read on other side and sometimes less usually 64KB.
The program is unthreaded.
There is another problem : one side(reading or writing) sometimes gives error :
java.net.SocketException: Software caused connection abort: socket write error
please reply and reply soon and give ur suggestions
thankshi
I am trying to write large binary data in theform
of byte arrays on sockets.
Data is as large as 512KB(== 524288bytes) So istore
the data (actually read from a file through
FileInputStream ) and then write on the socketwith
lines like this
DataOutputStream dos =
new DataOutputStream(new
BufferedOutputStream(sock.getOutputStream()));
dos.write(b);
/* suppose b is the arrayreference in which datais
stored. sometimes i write with that offset + len
function*/
dos.flush();
dos.close();
sock.close();
but the program is not stable: sometimes the whole
512KB is read on other side and sometimes less
usually 64KB.
The program is unthreaded.
There is another problem : one side(reading or
writing) sometimes gives error :
java.net.SocketException: Software caused
connection abort: socket write error
please reply and reply soon and give ursuggestions
thanksUmm how are you reading the data on the other side?
some of your code snippet might help. Your writing
code seems ok. I've written a file transfer program
in a similar fashion and have successfully testing on
different platforms (AIX, AS400, Solaris, Windows,
etc) without any problems and without needing to set
the buffer sizes with files as large as 600MB and you
said you're testing this on the loopback?
Point here is you should never need to reset any of the default TCP options to get program correctness. The options are more for optimizations and fine tuning. If indeed you need to change the options to get your program to work, then you program wont be able to scale under different load. -
Synch Error: String or binary data would be truncated.
I kicked off an inital synch for WebTools 2007 (may also be an issue in 596) and I had 1 synch error for SBOPartner:
String or binary data would be truncated.
The statement has been terminated.
at netpoint.api.data.DataFunctions.Execute(String SQL, IDataParameter[] parameters, String connectionstring)
at netpoint.api.NPBase.MarkSynched(String SynchID)
at NetPoint.SynchSBO.SBOObjects.SBOPartner.SBOToNetPoint(SBOQueueObject qData)
at NetPoint.SynchSBO.SynchObjectBase.Synch()
I traced the sql log and found the problem was related to addresses. The synchid only allows 50 characters but my synchid was 51 characters (COMINF, Communication Infrastructure Corporation, S). Anyway, to fix I modified the table to allow 100 characters and reran the synch. I know an upgrade will set it back to 50 but at least it's working now.
I tried to post this to support as a bug but I couldn't figure out how (as usual) or the authorization stuff changed so I figured I would post it here so hopefully the devs will see this and update the code.
SteveThanks Shawn ... My version of Netpoint is 2007.0.620.0 and the synch manager is 2007.0.620.35247. I'm not sure what patch level this means I am on though.
Steve -
String or binary Data would be truncated. Error detected by database DLL
Having problems generating two reports in Crystal Reports v8.5. I can run it on my machine and one on one of my Terminal Server(TermA). However when I tried to generate the same two reports on my second terminal server(TermB), it crashed and I get the following error messages: ODBC error: String or binary data would be truncated and Error detected by database DLL We have one set user ID and password to generate all of our Crystal Reports.
Steps taken:
Reinstall Crystal on TermB server and did a fresh installation of Crystal 8.5 on another workstation. Ran the reports and the result were the same (unable to generate the report) same errors messages.
Please HELP...
Thanks.Terminal Server was not supported in CR 8.5
-
Hi,
can any anyone give me a solution for this.It is pretty old /famous error
http://dimantdatabasesolutions.blogspot.co.il/2008/08/string-or-binary-data-would-be.html
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Error while inserting data in SQL Server.
Hi',
I am using SOA 11.1.1.5
I am inserting data using DB adapter in MS SQL Server. Some times I get below error.
Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID rrr/xxx!1.1*soa_313bd437-7bb9-41c6-a719-d1775b9afc4b/xx/4115908-BpInv0-BpSeq1.6-4
Fault Time Dec 24, 2012 8:02:09 AM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertIntoStagingxx.Stagingxx]. Caused by java.sql.BatchUpdateException: String or binary data would be truncated.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-8152" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>String or binary data would be truncated.</detail></part><part name="code"><code>8152</code></part></bindingFault></bpelFault>
Please advice.
Thanks
YatanHi Yatan,
This should be due to data issues. And the error message is due to data truncation issues.
Please check your payload that you are trying to insert into the SQL server table.
One or more fields might have a data that is exceeding its defined length with respect to the table definitions.
Problem with using SQL server is that while inserting, you will not be pointed towards which field or column is causing the error.
You have to take the pain of searching through the entire payload to find the problem causing ones.
Thanks,
Deepak. -
Error while exporting data from sql server to excel
Hi,
I am trying to export data from sql server to excel.
The query that I used is s follows
INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
select
column1,column2.... from Table1
I get the following error message while doing so..
String or binary data would be truncated.
The statement has been terminated.
One of the column's holds data more than 225 characters.
What is the way to correct this, i want the whole data of the colum in the excel sheet.I haven't had great luck with the INSERT INTO OPENROWSET method. Can you try one of the many samples from one of these 3 links?
http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
How to append binary data to existing file in OSB
Hi,
I have an OSB project that I need for it to append binary data via ftp. Here's my current flow:
MFL binary output --> Replace $body with mfl binary output --> Publish to action (Business service that's configured to ftp binary data).
However, when the data is ftp'ed the following error is thrown:
URI = ftp://xxx:21/opt/home/zzz/logs
Request metadata =
<xml-fragment>
<tran:headers xsi:type="ftp:FtpRequestHeaders" xmlns:ftp="http://www.bea.com/wli/sb/transports/ftp" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="h
ttp://www.w3.org/2001/XMLSchema-instance">
<ftp:fileName>11802_insert_oh_xfrmr.eai_data</ftp:fileName>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<ftp:isFilePath xmlns:ftp="http://www.bea.com/wli/sb/transports/ftp">false</ftp:isFilePath>
</xml-fragment>
Payload =
19266787^CLLL^C711791^CLLL^C^C1178213^CSingle Phase(1)^C63185066204^CA^CConstructed^C358880 NW 4 DR LK MONTAZA^C120/240^C09361^CN/A^CProposed Remove^CAerial^C45718100^C
Unknown^C^CNo^CNormal Closed^CClamp^CA^C1^C2-Cover^C19266796^CNo^CNo^C15^C^CYes^CYes^CYes^C13200Y/7620 X 22860Y/13200^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C
^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C19266641^Coh_fuse_switch^C63086930001^C4^CN31^CDD0613^C22.9^C63376474601^C8129580^CFalse^C4^COke
echobee^C43^C0^Cdefault^CYes^C
>
####<Nov 6, 2013 2:28:23 PM EST> <Error> <WliSbTransports> <goxsd1604> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<
anonymous>> <BEA1-4B688443B66FA09FFE75> <d2b4601b2fffd9b7:6b9f2297:1422a857ee8:-8000-000000000000171b> <1383766103889> <BEA-381105> <Error occured for the service endpo
int: com.bea.wli.sb.transports.TransportException: Unable to open data connection. Message is Received error response (553) from FTP server [mpsd1] IP [10.111.19.32] po
rt [21] status [connected] upon executing command [stor opt/home/zzz/logs/11802_insert_oh_xfrmr.eai_data.a]
com.bea.wli.sb.transports.TransportException: Unable to open data connection. Message is Received error response (553) from FTP server [mpsd1] IP [10.111.19.32] port [2
1] status [connected] upon executing command [stor opt/home/icanadm/logs/11802_insert_oh_xfrmr.eai_data.a]
at com.bea.wli.sb.transports.ftp.connector.FTPTransportProvider.sendMessage(FTPTransportProvider.java:422)
From what I understand the error code 553 represents a bad file name. The file name that I'm supplying is 11802_insert_oh_xfrmr.eai_data but it appears that the name is changed to 11802_insert_oh_xfrmr.eai_data.a . So I did the obvious and changed the file several different ways (without the .eai_data extension, removed the numbers from the file name) but still no luck.
Any suggestions?
Thanks,
YusufThanks Eric.
I'm using the JCA FTP adapter instead and noticed it's appending the test generated data supplied by the OSB test console.
However, how can I ensure that the MFL output that I need to append will be placed on a new line?
Also, how should I map/assign the MFL binary output to the opaqueElement type base64Binary defined in the WSDL file below?
Once again here's a sample payload that I need to ensure will be presented on a new line:
19266787^CLLL^C711791^CLLL^C^C1178213^CSingle Phase(1)^C63185066204^CA^CConstructed^C358880 NW 4 DR LK MONTAZA^C120/240^C09361^CN/A^CProposed Remove^CAerial^C45718100^C
Unknown^C^CNo^CNormal Closed^CClamp^CA^C1^C2-Cover^C19266796^CNo^CNo^C15^C^CYes^CYes^CYes^C13200Y/7620 X 22860Y/13200^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C
^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C19266641^Coh_fuse_switch^C63086930001^C4^CN31^CDD0613^C22.9^C63376474601^C8129580^CFalse^C4^COke
echobee^C43^C0^Cdefault^CYes
Here's the WSDL file that gets generated for the FTP adapter:
<wsdl:definitions
name="PutGenericDevice"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/AMS/Project1/PutGenericDevice"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/AMS/Project1/PutGenericDevice"
xmlns:opaque="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
>
<plt:partnerLinkType name="Put_plt" >
<plt:role name="Put_role" >
<plt:portType name="tns:Put_ptt" />
</plt:role>
</plt:partnerLinkType>
<wsdl:types>
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns="http://www.w3.org/2001/XMLSchema" >
<element name="opaqueElement" type="base64Binary"/>
</schema>
</wsdl:types>
<wsdl:message name="Put_msg">
<wsdl:part name="opaque" element="opaque:opaqueElement"/>
</wsdl:message>
<wsdl:portType name="Put_ptt">
<wsdl:operation name="Put">
<wsdl:input message="tns:Put_msg"/>
</wsdl:operation>
</wsdl:portType>
</wsdl:definitions>
Here's the JCA details:
<adapter-config name="PutGenericDevice" adapter="FTP Adapter" wsdlLocation="PutGenericDevice.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/ftp/DssPut"/>
<endpoint-interaction portType="Put_ptt" operation="Put">
<interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
<property name="PhysicalDirectory" value="/opt/eai/ofmw/Oracle/Middleware_R7/logs"/>
<property name="FileType" value="binary"/>
<property name="Append" value="true"/>
<property name="FileNamingConvention" value="dummy.txt"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
Thanks,
Yusuf -
Download file problem for binary data?
Dear All,
I have wrote a jsp file to do download page. I have used a piece of code from the JDC to this. This code will prompt the download dialog box each time user clicks the download button. The code itself will set the content type for different application. The code is like below:
try
java.io.File fileobj = new java.io.File(strFolder + strFile);
response.setContentType(application.getMimeType(fileobj.getName()));
response.setHeader("Content-Disposition","attachment; filename=\""
+ strFile + "\"");
java.io.FileInputStream in = new java.io.FileInputStream(fileobj);
int ch;
while ((ch = in.read()) != -1) {
out.write(ch);
out.flush();
in.close();
} catch(Exception e)
The code can download and handle text file correctly when it is openned in the text editor or inside the IE. But when a PDF file or Image is downloaded and openned in the PDF viewer or image viewer, it is corrupted and cannot be viewed. What is the problem? Any ideas?
So, I wonder this code can handle binary data or not. It is seen like there is no different code to handle text and binary data in Java/Jsp.
Thank you very much!
Best Regards,
Rockyu Lee
Add following lines to .tld file (custom tag definition)
<tag>
<name>downloadbinary</name>
<tagclass>org.rampally.DownloadBinaryTag</tagclass>
<bodycontent>JSP</bodycontent>
</tag>
Add following line to JSP files.
In JSP, keep one line of source. Make sure that there are no space and additional line feeds at the any where
in the JSP files except JSP tags.
<%@ taglib uri="/WEB-INF/taglibs/mb.tld" prefix="mytags" %>
<mytags:downloadbinary />
I am hoping that you have all required parameters such as fileName to download, etc.
in your session or request object.
Tag class ....
public class DownloadBinaryTag extends TagSupport {
public int doEndTag() throws JspException {
// TODO: get binary data from filename or
// binary data buffer from datase.
// I am making it simple .. assume that it is a request parameter for
// you test easily.
String fileName = request.getParameter( "filename" );
java.io.File file = new java.io.File( fileName);
java.io.DataInputStream dis;
try {
dis = new java.io.DataInputStream(new FileInputStream(fileName));
} catch (FileNotFoundException e) {
// do error handling ...
return EVAL_PAGE;
BinaryUtil.sendBinaryFile( dis, (HttpServletResponse) pageContext.getResponse(), contentType );
return EVAL_PAGE;
public class BinaryUtil
static public void sendBinaryFile( DataInputStream dis,
HttpServletResponse response,
String contentType ) {
try {
response.setContentType(contentType);
String fileName="test.pdf";
response.setHeader("Content-disposition", "inline; filename=" + newFileName );
ServletOutputStream sout = response.getOutputStream();
int len;
byte[] data = new byte[128 * 1024];
while ((len = dis.read(data, 0, 128 * 1024)) >= 0)
sout.write(data, 0, len);
sout.flush();
sout.close();
} catch (Exception e) {
System.out.println(e.getMessage());
static public void sendBinaryFile( byte[] data,
HttpServletResponse response,
String contentType ) {
try {
response.setContentType(contentType);
String fileName="test.pdf";
response.setHeader("Content-disposition", "inline; filename=" + newFileName );
ServletOutputStream sout = response.getOutputStream();
sout.write(data);
sout.flush();
sout.close();
} catch (Exception e) {
System.out.println(e.getMessage());
You may have to change 'inline' to 'attachment' if you do not want IE to inline the document.
That's all!!.. Hope this helps...! -
Oracle 9.2.0.8 Binary Data Problem
Hi Folks,
need some advice from the experts here about an error I got yesterday while installing a (Java-based) Software at a customer using Oracle 9.2.0.8.
While being able to work with the database most of the time, I get an error when trying to save binary data. Unfortunately I don't have access to the DB-logs, so I hope the log I have may raise a thought or two from anybody and that may help me bring some light into the darkness I'm poking in at the moment.
<log>
java.sql.SQLException: No more data to read from socket
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1160)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:962)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:894)
at oracle.jdbc.ttc7.Oclose.receive(Oclose.java:103)
at oracle.jdbc.ttc7.TTC7Protocol.close(TTC7Protocol.java:693)
at oracle.jdbc.driver.OracleStatement.close(OracleStatement.java:731)
at oracle.jdbc.driver.OraclePreparedStatement.privateClose(OraclePreparedStatement.java:535)
at oracle.jdbc.driver.OraclePreparedStatement.close(OraclePreparedStatement.java:440)
at org.apache.tomcat.dbcp.dbcp.DelegatingStatement.close(DelegatingStatement.java:168)
</log>
I searched around and got some results about
- codepage: The DBA told me that the DB is using "cp1252", so I tried to use both ISO-8859-1 and UTF-8 (both are supported by the application)
- Session Management: Tried to raise/decrease the limits for idle/maximum connections and the DBA told me to set the parameter "SESSION_CACHED_CURSORS=0", but unfortunately this is not possible when using a connection URL "jdbc:oracle:thin:@..."
So... if anybody has an idea what to check or ask the DBA to change or almost anything, I'd kindly welcome the feedback.
Thanks,
enniHi Sybrand,
thank you for your clarification for the codepage!
And no, I don't think that I found a new issue, just wasn't able to find a good answer on the net and after trying to get an evaluation copy (just for the install and first tests) of Oracle 9, the support told me "No way.".
And yes, you're definitely right, it should be buried.
But we all know that there are companies out there that allow new applications tests on thier "good'old" DB. Guess that is exactly what happens here.
Maybe somebody else reads this and had similiar problems in the past, so I keep this "open" for just some more time.
Thanks,
have a good time!
enni -
Convert Binary Data to string in MsSQL
Hello,
I am running a query for MSSQL database to get some file content which is stored in Binary data format in the database.
I want to copy that file which is in the binary data format to a file in the text format.
How can I do this?
Regards,
SravanthiThis is the expected result in the file that stores the data.
ResultElement
WshOutputTest
Errors/Failures
1 / -
Incident
Error: some unexpected result
function main()
some additional info; eg. stacktrace
Incident
Warning: some warning message
function main()
some additional info; eg. stacktrace
But I am getting the following stored in my file:::
PK FSH;
output.xmlíT»NÃ@8¥
*Æ)xH) R[ñÅ9AìȾðøy`nÏs1nBY>_vvfÊÏw>±ÄÞ¡Q¢AWà§8ãWÉ1£=%#ôÜá^ü5BC ½+¬©iqËSSßñ-u&Yù:»ÓÒ²À#+9¯A©øDÔ*ù|¯y®E1fôìåNËëì»ü~¼ÕK{ ·0ßKÖ2ÞbÞ*
*©\fW<gRyJk¹Ñ'Ã6?T¦ÍOÈÐÿx[³cwñCÌRÛ0^y¼éù}.y»|ýF(ÚéÐ%fÓÕu]¿Ùõ§§WNdÿLíy)ûq÷¨'ÌáßRnZ"·ªaÃ:ÎßóûÏl?ÍQbm=wk¸ûÙî>[ôÿy_PKÙõ¡¬N PK FSH;Ùõ¡¬N *
*output.xmlPK 8 *
I tried getting the Binary Stream with UTF-8 encoding style and no encoding style too but it didnt work.
Thanks,
Sravanthi. -
Zip binary data and save zip file to disk at bsp
Hi,
I try to compress (zip) binary data (for example a picture) and then give it to a html page. I use the cl_abap_gzip=>compress_binary method and it seems to work. But when I save the zip-file to harddisk over the popup at the html - page, the file could not be opened. WinZip says that it is an unvalid archive.
Can anybody help me?
Here my example coding at the OnInitialization Event of the business server page:
* event handler for data retrieval
* local variables
DATA: xsourcefile TYPE xstring.
DATA: xzippedfile TYPE xstring.
DATA: source_file_mime_type TYPE string.
DATA: xzippedcontentlength TYPE i, xzippedcontentlengthstring TYPE
string.
* References
DATA: o_mime_api TYPE REF TO if_mr_api.
* processing
* +++ Read File from MIME-Repository (binary) +++
CALL METHOD cl_mime_repository_api=>if_mr_api~get_api
RECEIVING
r_mr_api = o_mime_api.
CALL METHOD o_mime_api->get
EXPORTING
i_url = 'SAP/ZGSD_SD_ADIS/test.gif'
* I_CHECK_AUTHORITY = 'X'
IMPORTING
* E_IS_FOLDER =
e_content = xsourcefile
e_mime_type = source_file_mime_type
* E_LOIO =
* CHANGING
* C_LANGUAGE =
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* +++ create ZIP-File +++
TRY.
CALL METHOD cl_abap_gzip=>compress_binary
EXPORTING
raw_in = xsourcefile
* RAW_IN_LEN = -1
* COMPRESS_LEVEL = 6
IMPORTING
gzip_out = xzippedfile
gzip_out_len = xzippedcontentlength.
* ... Länge Casten !
xzippedcontentlengthstring = xzippedcontentlength.
* ... Errorhandling
CATCH cx_parameter_invalid_range . " Error-Handling
CATCH cx_sy_buffer_overflow . " Error-Handling
CATCH cx_sy_compression_error . " Error-Handling
ENDTRY.
* +++ Put ZIP-File in Response +++
response->set_data( xzippedfile ).
response->set_header_field( name = if_http_header_fields=>content_type
value = 'application/octet-stream' ).
response->set_header_field( name =
if_http_header_fields=>content_length
value = xzippedcontentlengthstring ).
response->set_header_field( name = 'Content-Disposition'
value = 'inline;filename=test.zip' ).
navigation->response_complete( ).
Thanks Timo
PS: I posted this question also at ABAP Forum.Hi,
First you need to define your ext prog in SM69.
It is simple though, specify:
Command name: ZZIPBIN
OS: (your os)
System command: /yourpath/zzipbin
Extra params allowed: checked
Then you need to code this:
data: table TYPE zeu_t_btcxpm.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = 'ZZIPBIN'
additional_parameters = param
operatingsystem = sy-opsys
terminationwait = 'X'
TABLES
exec_protocol = table
EXCEPTIONS
no_permission = 1
command_not_found = 2
parameters_too_long = 3
security_risk = 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry = 13
jobcount_generation_error = 14
OTHERS = 15.
See also http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a8023505211d189550000e829fbbd/frameset.htm
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d! -
Exception writing binary data to the output stream to client -Broken pipe
Hi,
I am trying to use the drag & drop feature using Contributor mode of Webcenter sites. Single Image Page Attribute is working properly where as Multiple Image Page Attribute throws the following error:
[ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Exception writing binary data to the output stream to client 10.191.117.106
java.net.SocketException: Broken pipe
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:568)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:539)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427)
at weblogic.servlet.internal.ChunkOutput$2.checkForFlush(ChunkOutput.java:648)
at weblogic.servlet.internal.ChunkOutput.write(ChunkOutput.java:333)
at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:148)
at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:148)
at COM.FutureTense.Servlet.ServletRequest$OutputOutputStream.write(ServletRequest.java:80)
at COM.FutureTense.Servlet.ServletRequest.write(ServletRequest.java:1633)
at com.openmarket.Satellite.RequestContext.write(RequestContext.java:1123)
at com.openmarket.Satellite.BytePiece.stream(DataPiece.java:253)
at com.openmarket.Satellite.CacheObjectImpl.stream(CacheObjectImpl.java:651)
at com.openmarket.Satellite.Http11Responder.respondForWrapper(Http11Responder.java:142)
at com.openmarket.Satellite.WrapperAwareResponder.respond(WrapperAwareResponder.java:36)
at com.openmarket.Satellite.SatelliteServer.execute(SatelliteServer.java:85)
at com.openmarket.Satellite.servlet.BaseServlet.doGet(BaseServlet.java:118)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:557)
at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Thanks
KarthiKThank u very much,
FileOutputStream opGif = new FileOutputStream(destFile, false);
I have changed above line with the following line:
PrintWriter opGif = new PrintWriter ( new FileWriter(destFile, false));
and now this code is working very fine.
Thanks once again... -
Storing binary data to a file......
Hi Friends,
I am trying to make a webapp in which users can upload Videos and I can store that videos on the server. I have this bit of code:
public ActionForward execute(
ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response) throws Exception{
VideoUploadForm myForm = (VideoUploadForm)form;
// Process the FormFile
FormFile myFile = myForm.getTheFile();
byte[] fileData = myFile.getFileData();
}My question is, should i store the byte array into some text file???Then how can i read it back and get the original format i.e *.avi or *.mpg.
This might be easy,but this is my first time dealing with binary data,so your help would be appreciated.
Thanks
P.S: Any links would be appreciatedThanks BalusC,
After lots of hardwork finally I am trying to upload the binary file in the database,but getting this error:
java.sql.SQLException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'desc, file_blob) values(1, 1, 'uploaded file from user', _binary'\0\0�!\0\0�\' at line 1
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2928)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1571)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1666)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2994)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:936)
at com.mysql.jdbc.PreparedStatement.execute(PreparedStatement.java:773)
at org.apache.tomcat.dbcp.dbcp.DelegatingPreparedStatement.execute(DelegatingPreparedStatement.java:168)This is my code thats trying to write that binary file:
public class StoreData {
private static Log log = LogFactory.getLog(StoreData.class);
private static final String INSERT_BLOB = "Insert into videos.files (id, owner_id, desc, file_blob)" +
" values(1, 1, 'uploaded file from user', ?)";
public void WriteData(VideoUploadForm myForm){
log.info("Writing file to database");
Connection conn = ConnectionUtil.getConnection();
PreparedStatement stmt = null;
// Process the FormFile
FormFile myFile = myForm.getTheFile();
byte[] bytes = null;
try{
bytes = myFile.getFileData();
}catch(IOException ie){
log.error("Upload File not Found");
ie.printStackTrace();
InputStream is = new ByteArrayInputStream(bytes);
try {
stmt = conn.prepareStatement(INSERT_BLOB);
stmt.setBinaryStream(1,is,bytes.length);
stmt.execute();
stmt.close();
}catch (Exception e) {
log.error("Error writing data to file:");
e.printStackTrace();
} finally {
ConnectionUtil.closeStatement(stmt);
ConnectionUtil.closeConnection(conn);
}Looking for some help here.....
Maybe you are looking for
-
HR Authorization issue for specfic User
Dear all, One of the HR user , he can run payroll on particular site , i have assigned Org key of site to master data on the particular role . User tried to run payroll using pa30 with personnel no (one of store user) . but system is not take any val
-
Where can i found 0ANALYSIS_PATTERN in BI content
Hello , In Bi Content ,where can i find "0ANALYSIS_PATTERN"? I know that it is under BW Web Template in BI content . But is there any other object type which is having the same "0ANALYSIS_PATTERN"? Please reply me urgently.
-
Converting PDF to RAW for display in the portal
Hi all, We have an application that took a pdf and converted it into a raw datastring to pass to the portal for display purposes. We have migrated this function to a unicode system and are now struggling to get this to work. Code in non-unicode syste
-
FWTR056 Error assigning update type to flow type 1200, sign -
Hi we have defined a monymarket product type 530 ("Repo") with Transaction Type 200 (Liablity) and 100 (Asset). This works fine. Now, the current market situation requires negative interests for Transaction Type 200: Example: First Cashflow: +1M Fin
-
The lightroom lens correction information for my Canon 100-400L and 15-85 has disappeared. It was there last week, now its gone. Only changes I have made is I adjusted the micro focusing adjustments to the focal plane in the 7D camera on both of them