Errors installing web service to use dreamweaver extension

Portal Version: 10g
OS/Vers. Where Portal is Installed:: Linux AS 2.1
Errors installing web service to use dreamweaver extension
Recently I download the dreamweaver extension for portal, but when I try to install it several errors are raised... in the installation guide the next message appear:
This installation for this feature is an easy 3 step procedure.
1. Installing the Portal web service
2. Configuring the web service to work with your portal (one time administrative process)
3. Installing the PortalTemplates extension for Dreamweaver MX
well but when I try to run the 1 step everything goes wrong...
in the guide say:
# Transfer this file to the OC4J_HOME/j2ee/home directory of the OC4J
(please make sure that the OC4J is up and running)
# Use the following command to install the web service
java -jar admin.jar ormi://<oc4j_host>:<oc4j_ormi_port>
<username> <password>
-deploy -file portalTemplate.ear -deploymentName portalTemplate
here it's where I have some questions,
1. the ormi referers to the rmi ok (I think that), well then I go tho the iasconsole and search for the ports and is show:
home RMI 3202
OC4J_Portal RMI 3203
OC4J_BI_Forms RMI 3204
then I use the home-> port 3202
java -jar admin.jar ormi://myhost.midtierinstall.com:3202
ias_admin ias_midtier_admin_password -deploy -file portalTemplate.ear -deploymentName portalTemplate
but the following messages appear :
Error: Unable to find java:ServerAdministrator : lookup error:javax.naming.AuthenticationException invalid username/passwod for default (ias_admin).... and the error continue... but the problem is that the password works when I use the enterprise manager in that midtier console...
I want to know if I'm doing something wrong or how I should use this command to install that web service

The ormi is the rmi port in the OC4J. This coold be found in oc4j_home/j2ee/home/config/rmi.xml file. The default port is 23791.
Hope this helps,
Ramya

Similar Messages

XML Parser Error while creating Web service Client using JAX RPC

hello evryone,
Im facing XML Parser Error while creating web service client using JAX RPC. Im using Net Beans IDE for development purpose. I have wrote configuration file for client. Now i want to create Client stub. However i dont know how to do this in Net Beans. So i tried to do it from Command promt using command :
wscompile -gen:client -d build -classpath build config-wsdl.xml
here im getting Error:
error parsing configuration file: XML parsing error: com.sun.xml.rpc.sp.ParseException:10: XML declaration may only begin entities
Please help me out.
Many thanks in advance,
Kacee

Can i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.

Errors creating a Web Service Proxy using Microsoft WSDL.exe tool

I have deployed a BPEL process using JDeveloper. This process can be invoked from the BPEL console and completes as expected. I am trying to create a Web Service Proxy using the Microsoft WSDL.exe tool so that the process can be invoked from a Microsoft Word document. This process is based on the AutoLoan example in the Developer's Guide for Microsoft Office Interoperability B25781-01.
WSDL.exe returns the following error message
Error: There was an error processing 'http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl'.
- The document at the url http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl was not recognized as a known document type. The error message from each known type may help you fix the problem:
- Report from 'WSDL Document' is 'There is an error in XML document (19, 7).'.
- A schema with the namespace '' has already been added.
- Report from 'DISCO Document' is 'Discovery document at the URL http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl could not be found.'.
- The document format is not recognized.
- Report from 'XML Schema' is 'Expected Schema root. Make sure that the root element is <schema> and the namespace is 'http://www.w3.org/2001/XMLSchema' for an XSD schema or 'urn:schemas-microsoft-com:xml-data' for an XDR schema. An error occurred at , (2, 2).'.
How do I resolve this error?

The WSDL file is below.
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="HonorariumSmartDoc" targetNamespace="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/HonorariumSmartDoc">
- <types>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/HonorariumSmartDoc" schemaLocation="HonorariumSmartDoc.xsd" />
</schema>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://erp.template.co.uk:8889/orabpel/xmllib/ws-addressing.xsd" />
</schema>
</types>
- <message name="HonorariumSmartDocResponseMessage">
<part name="payload" element="tns:HonorariumSmartDocProcessResponse" />
</message>
- <message name="HonorariumSmartDocRequestMessage">
<part name="payload" element="tns:HonorariumSmartDocProcessRequest" />
</message>
- <message name="WSARelatesToHeader">
<part name="RelatesTo" element="wsa:RelatesTo" />
</message>
- <message name="WSAReplyToHeader">
<part name="ReplyTo" element="wsa:ReplyTo" />
</message>
- <message name="WSAMessageIDHeader">
<part name="MessageID" element="wsa:MessageID" />
</message>
- <portType name="HonorariumSmartDocCallback">
- <operation name="onResult">
<input message="tns:HonorariumSmartDocResponseMessage" />
</operation>
</portType>
- <portType name="HonorariumSmartDoc">
- <operation name="initiate">
<input message="tns:HonorariumSmartDocRequestMessage" />
</operation>
</portType>
- <binding name="HonorariumSmartDocBinding" type="tns:HonorariumSmartDoc">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="initiate">
<soap:operation style="document" soapAction="initiate" />
- <input>
<soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
<soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <binding name="HonorariumSmartDocCallbackBinding" type="tns:HonorariumSmartDocCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="onResult">
<soap:operation style="document" soapAction="onResult" />
- <input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <service name="HonorariumSmartDocCallbackService">
- <port name="HonorariumSmartDocCallbackPort" binding="tns:HonorariumSmartDocCallbackBinding">
<soap:address location="http://set.by.caller" />
</port>
</service>
- <service name="HonorariumSmartDoc">
- <port name="HonorariumSmartDocPort" binding="tns:HonorariumSmartDocBinding">
<soap:address location="http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0" />
</port>
</service>
- <plnk:partnerLinkType name="HonorariumSmartDoc">
- <plnk:role name="HonorariumSmartDocProvider">
<plnk:portType name="tns:HonorariumSmartDoc" />
</plnk:role>
- <plnk:role name="HonorariumSmartDocRequester">
<plnk:portType name="tns:HonorariumSmartDocCallback" />
</plnk:role>
</plnk:partnerLinkType>
</definitions>

Oracle Database Web Service Client using UTL_DBWS :: ORA-29532 Error

Hi,
I have the Oracle Database 10.2.0.1.0 :-
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionI have written a simple Web Services Client using the classes gfrom the UTL_DBWS package. I loaded the JAR file dbwsclient.jar in the SYS Schema and I am trying to use it in the USF Schema.
However, I have hit this error & I ma unable to proceed :-
SQL> select get_stock_price from dual;
select get_stock_price from dual
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IllegalAccessException: javax.xml.rpc.ServiceException:
java.security.AccessControlException: the Permission
(java.lang.RuntimePermission getClassLoader) has not been granted to USF. The
PL/SQL to grant this is dbms_java.grant_permission( 'USF',
'SYS:java.lang.RuntimePermission', 'getClassLoader', '' )
ORA-06512: at "USF.UTL_DBWS", line 193
ORA-06512: at "USF.UTL_DBWS", line 190
ORA-06512: at "USF.GET_STOCK_PRICE", line 17Can you please help me with this ?
Regards,
Sandeep

Hi,
The error message said
the Permission(java.lang.RuntimePermission getClassLoader) has not been granted to USF.
I'd follow the suggestion
The PL/SQL to grant this is dbms_java.grant_permission( 'USF','SYS:java.lang.RuntimePermission', 'getClassLoader', '' )
In case you have not done so, consult the Callout Users Guide @
http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
Kuassi http://db360.blogspot.com

CompileException: Error compiling web service (using ant jwsc)

Hi,
I try to use the ant task jwsc to create my portable artefacts for a web service.
Unfortunately I get the following exception:
BUILD FAILED
C:\Sun\jwsdp-2.0\apache-ant\bin\build.xml:7: weblogic.wsee.tools.jws.build.CompileException: Error compiling web service: C:\Sun\jwsdp-2.0\apache-ant\bin\src\test\WsTest.java
I do not know why the ant task can not compile my jws file (shown below) whereas Eclipse can!
package test;
import javax.jws.WebService;
@WebService (name="WsTestName", serviceName="WsTestServiceName")
public class WsTest {
* @param name
* @return Say hello to the person.
public String sayHello(String name) {
return "Hello, " + name + "!";
I hope somebody can help me.
Thanks
Franz

I thought I would post an update since I found a solution. The problem was a ClassCast exception in a part of the SSL stack, that wanted to use the ant BuildException class. This has the effect of hiding the real issue which was that the SSL connection was not successfully occuring. The real problem was that the SSL connection started with a WSDL retrieved via SSL, but the connection for the port was through a username/password. When a username/password is used to create a port, the WL stack falls back to http and causes a ClassCast exception on weblogic.wsee.connection.transport.http.HttpTransportInfo. The solution is to create an https transport object when the service impl is created:
HttpsTransportInfo transport = new HttpsTransportInfo ();
transport.setUsername (user.getBytes ());
transport.setPassword (pass.getBytes ());
gServiceImpl = new PersistenceManagerService_Impl (url, transport);
and to create the port without parameters:
port = getServiceImpl ().getPersistenceManagerServicePort ();
This allows one-way SSL with username/password for the connection.

How to invoke a web service asynchronously using ws-addressing model?

Hi Gurus,
We are invoking an external web service asynchronously using Oracle Work Flow Business events using the following mechanism -
1)Created a web service invoker event to invoke the web service.
2)Created a subscription that invokes the web service (provided the wsdl address, operation info).
3)Defined a subscription parameter WFBES_CALLBACK_EVENT with value pointing to a recieve event.
4)Created a receive event(parameter value for WFBES_CALLBACK_EVENT) and a subscription that directs the response to a custom PL/SQL function to process response.
so far so good. We were able to invoke the web service and get and process the response.
Problem: The external web service can take upto 10 hrs to process the request. A time out of 2 hrs is set on the server hosting the external web service. So when the external web service takes more than 2 hrs to process the request and it times out and we get the following error on EBS side -
'l_error_message:oracle.apps.fnd.wf.bes.InvokerException: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=iso-8859-1'
Now the external web service providers are suggesting that we are not calling their web service asynchronously and we should use ws-addressing model to do so.
Is there a way to invoke this web service using ws-addressing model using business events or from PL/SQL or OA middle-tier?
Regards,
Sunil
CMRO Development.
I am providing here the WSDL of the external web service -
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://service.sdk.webservices.enigma.com" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:ns1="http://org.apache.axis2/xsd" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:ax21="http://service.sdk.webservices.enigma.com/xsd" xmlns:ns="http://service.sdk.webservices.enigma.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://service.sdk.webservices.enigma.com/xsd" xmlns:ax22="http://service.sdk.webservices.enigma.com">
<xs:import namespace="http://service.sdk.webservices.enigma.com"/>
<xs:complexType name="JCGWebServicesException">
<xs:complexContent>
<xs:extension base="ax22:Exception">
<xs:sequence>
<xs:element minOccurs="0" name="id" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="message" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="JCGServiceReply">
<xs:sequence>
<xs:element maxOccurs="unbounded" minOccurs="0" name="pdfStatus" nillable="true" type="ax21:PdfStatus"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PdfStatus">
<xs:sequence>
<xs:element minOccurs="0" name="jobCardID" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="pdfPath" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="status" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://service.sdk.webservices.enigma.com" xmlns:ax23="http://service.sdk.webservices.enigma.com/xsd">
<xs:import namespace="http://service.sdk.webservices.enigma.com/xsd"/>
<xs:complexType name="Exception">
<xs:sequence>
<xs:element minOccurs="0" name="Exception" nillable="true" type="xs:anyType"/>
</xs:sequence>
</xs:complexType>
<xs:element name="JCGWebServicesException">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="JCGWebServicesException" nillable="true" type="ax21:JCGWebServicesException"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="runJobCard">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="a_WorkpackageFilePath" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="a_userName" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="runJobCardResponse">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="return" nillable="true" type="ax21:JCGServiceReply"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</wsdl:types>
<wsdl:message name="JCGWebServicesException">
<wsdl:part name="parameters" element="ns:JCGWebServicesException">
</wsdl:part>
</wsdl:message>
<wsdl:message name="runJobCardResponse">
<wsdl:part name="parameters" element="ns:runJobCardResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="runJobCardRequest">
<wsdl:part name="parameters" element="ns:runJobCard">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="JCGServicePortType">
<wsdl:operation name="runJobCard">
<wsdl:input message="ns:runJobCardRequest" wsaw:Action="urn:runJobCard">
</wsdl:input>
<wsdl:output message="ns:runJobCardResponse" wsaw:Action="urn:runJobCardResponse">
</wsdl:output>
<wsdl:fault name="JCGWebServicesException" message="ns:JCGWebServicesException" wsaw:Action="urn:runJobCardJCGWebServicesException">
</wsdl:fault>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="JCGServiceSoap11Binding" type="ns:JCGServicePortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="runJobCard">
<soap:operation soapAction="urn:runJobCard" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="JCGWebServicesException">
<soap:fault name="JCGWebServicesException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:binding name="JCGServiceSoap12Binding" type="ns:JCGServicePortType">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="runJobCard">
<soap12:operation soapAction="urn:runJobCard" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
<wsdl:fault name="JCGWebServicesException">
<soap12:fault name="JCGWebServicesException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="JCGService">
<wsdl:port name="JCGServiceHttpSoap12Endpoint" binding="ns:JCGServiceSoap12Binding">
<soap12:address location="http://localhost:8080/JCG/services/JCGService"/>
</wsdl:port>
<wsdl:port name="JCGServiceHttpSoap11Endpoint" binding="ns:JCGServiceSoap11Binding">
<soap:address location="http://localhost:8080/JCG/services/JCGService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Edited by: sikumar on Jun 22, 2010 1:50 PM

Bharat,
You dont need a Business Event setup to invoke a BPEL process from PL/SQL unless you have a special case and you need to process the response from the BPEL process in a separate thread (or in background)..
For a straight call to BPEL process from PL/SQL, here is a sample script -
function "MYTEST0" return varchar2 AS
soap_request varchar2(30000);
soap_respond varchar2(30000);
http_req utl_http.req;
http_resp utl_http.resp;
resp XMLType;
i integer;
helpStr varchar2(30000);
BEGIN
soap_request:= '<?xml version = ''1.0'' encoding = ''UTF-8''?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="
http://xmlns.oracle.com/TestWS">
<env:Body>
<ns0:TestWSProcessRequest>
<ns0:input>abc</ns0:input>
</ns0:TestWSProcessRequest>
</env:Body>
</env:Envelope>
/* the BPEL process name is TestWS */
http_req:= utl_http.begin_request
( 'http://hostname:7777/orabpel/default/TestWS/1.0'
, 'POST'
, 'HTTP/1.1'
utl_http.set_header(http_req, 'Content-Type', 'text/xml');
utl_http.set_header(http_req, 'Content-Length', length(soap_request));
utl_http.set_header(http_req, 'SOAPAction', 'process');
utl_http.write_text(http_req, soap_request);
http_resp:= utl_http.get_response(http_req);
utl_http.read_text(http_resp, soap_respond);
utl_http.end_response(http_resp);
resp:= XMLType.createXML(soap_respond);
resp:= resp.extract('/soap:Envelope/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"');
helpStr := '';
i:=0;
loop
helpStr := helpStr || substr(soap_respond,1+ i*255,250);
i:= i+1;
if i*250> length(soap_respond)
then
exit;
end if;
end loop;
return helpStr;
END;

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Getting a error invoking web service action block

HI
I am first time using web service action block in xmii. I am using it for executing my transaction . But it is giving error stating that
Error invoking web service action block. I dont know please help me out?

Hi Mike,
I am using xMII - 11.5 version and with java 1.6.0_07. In My system i have installed service pack 3. When ever i use webservice action block and execute it, It gives error stating .
[INFO ]: Execution Started At: 11:07:16
[DEBUG]: 00000.01600 Begin Transaction 'TMP83E3D064-F6E8-4E3D-647F-6CE6B41C9E83'
[DEBUG]: 00000.01600 Begin Sequence Sequence : ()
[DEBUG]: 00000.01600 Begin Action WebService_0 : ()
[ERROR]: Error Invoking Web Service Action: null
[ERROR]: ACTION FAILED: End Action WebService_0 : ()
[DEBUG]: 00001.42200 Begin Sequence Sequence_0 : ()
[DEBUG]: 00001.42200 Begin Action Tracer_0 : ()
[INFO ]: <?xml version="1.0" encoding="UTF-8"?><XacuteResponse xmlns="http://www.lighthammer.com/Xacute"><Rowsets DateCreated="2000-01-01T00:00:00" EndDate="2000-01-01T00:00:00" StartDate="2000-01-01T00:00:00" Version=""><FatalError/><Messages><Message/></Messages><Rowset><Columns><Column Description="" MaxRange="0.00" MinRange="0.00" Name="" SQLDataType="0" SourceColumn=""/></Columns><Row><Output/></Row></Rowset></Rowsets></XacuteResponse>
[DEBUG]: 00001.43700 End Action Tracer_0 : ()
[DEBUG]: 00001.43700 End Sequence Sequence_0 : ()
[DEBUG]: 00001.43700 End Sequence Sequence : ()
[DEBUG]: 00001.43700 End Transaction 'TMP83E3D064-F6E8-4E3D-647F-6CE6B41C9E83'
[INFO ]: Execution Completed At: 11:07:17 Elapsed Time was 1421 mS
please help me out .

Error Invoking Web Service Action: Status (500): null

Hi forum
I am getting an "Invoking Web Service Action: Status (500): null" error when invoking a web service action block . The BLS transaction used as a web service outputs a text string which I tested using an xacute query . while executing the transaction as a web service the tracer tells me that there is no output .
Best regards,
Antonio
I am using an xMII 11.5 installation .
[INFO ]: Execution Started At: 04:17:46
[DEBUG]: 00000.01600 Begin Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[DEBUG]: 00000.01600 Begin Sequence Sequence : ()
[DEBUG]: 00000.01600 Begin Action WebService_0 : ()
[ERROR]: Error Invoking Web Service Action: Status (500): null
[ERROR]: ACTION FAILED: End Action WebService_0 : ()
[DEBUG]: 00000.11000 Begin Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 Begin Action Tracer_0 : ()
[INFO ]:
[DEBUG]: 00000.11000 End Action Tracer_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence : ()
[DEBUG]: 00000.11000 End Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[INFO ]: Execution Completed At: 04:17:46 Elapsed Time was 94 mS

Jamie,
Yes Indeed, I was calling inside a web service action another BLS transaction . Now , I am using a call to the transaction using the runner . It worked fine .
Thanks,

Error running Web Services in DEMO : User is not Authorized error

Hi all,
We created a Web Service in our DEMO installation of ERP9 Tools 8.97, Database Local SSE (User - DEMO, Password-DEMO). The Web Service is using JDE Vanilla BSFN - B0100021 - Formatted Address and created through JDeveloper using JDE BSSV tool.
When we are running the Web Service (TestCustomWebService) from JDeveloper (Right Click and Run) it is providng an url (http://moequbal:8988/context-root-JP55HOL/TestCustomWebServiceSoapHttpPort) and when we are pasting the URL in the browser and entering a valid value in the Input field and pressiing the 'Invoke' Button, the following Error pops up -
"<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://oracle.e1.bssv.JP55HOL/types/">
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Internal Server Error (Caught exception while handling request: oracle.e1.bssvfoundation.exception.E1AuthorizationException: User is not authorized to invoke this published business service)</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>"
Please help.
Thanks,
Tufan

I can confirm that the lab and BSSV functionaly works in DEMO, I have it working nicely. However, I dont think you can deploy this to a Business Services server. I haven't tried as yet. but you can test all the published BSSV via jDeveloper to verify that you have the correct code. It starts O4CJ and web services locally and brings up an input web page to enter the AN8, the data outputs to XML.
Tip:
1) Make sure that you have an entry in the P00950 security workbench. .
2) make sure that you select the BSSV item (i.e CustomAddressManager) and select 'set to publish' available (this only appears on checkin) when you check the object in. Make sure that you have entries in the F98601, 602, 603 tables in Object Librarian
3) Open P00950 select published bssv, click on the grid line (1st column) in the grid form of W00950X click the searchlight, in W00950U hit find you must see your published BSSV in here.
if not you go back to step 2. You must 'set to publish' for the bssv i.e CustomAddressManager object. Otherwise you will not be able to see in the W00950U form.
4) Repeat for the 2nd column and Make sure you select the 'Secure by Method' this will take you to W00950Y form and you must select your bssv and select the 'Allow Execute' on the bottom of the form.
Once you have these in place then you will not get the 'Not authorized' error messages.
Christopher Koloszar
JDE Senior Business Analyst
Oracle 10g DBA
[email protected]
Edited by: user3025204 on 15-Oct-2009 02:00

Issue with creating Web Service Client using Oracle JDeveloper

Hi All,
I am trying to create a Web Service Client using Oracle JDeveloper. I set the Project compiler property to JRE 1.4
When I run the web service client, it throws me bunch of errors saying:
'Error(32,2): annotations are not supported in -source 1.4'
I am wondering why JDeveloper is using annotations even after I set the compiler property to 1.4
I am following this link to create the webservice client:
http://www.oracle.com/technetwork/developer-tools/forms/webservices-forms-11g-094111.html
Any help in this regard would be greatly appreciated.
Thanks,
Scott.

Dear Shay,
Thanks for your prompt response.
You are right. JDeveloper 11g uses JDK 6 style annotations for the clients it creates. But you can change the JRE Version used at compile time by following these steps:
1. In the Applications Navigator, right-click the Project Nanem node and select Project Properties... from the context menu.
2. Select the Compiler node and check the Source Files and Generated Class Files dropdown lists. You may change these versions depending on the version of the JRE you are using with Forms to ensure that the compiled
classes from JDeveloper can be read by the JRE used by Form.
So I selected JDK version 1.4 there.
Sorry that I did not mention that we are using Oracle Forms 10g. That is the reason I selected JDK 1.4
Thank you.
Scott.

Create Web Service System using WSDL URL

Hi,
Please help me create a Web Service System.
Following is the test result when I perform Connection Test after creating a system
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Thanks,
Atul

Let me reiterate my problem.
I created the System as following
Creating System's Object:
1) Go to System Administration
2) Go to System Configuration
3) Go to Portal Content on Object Based Navigation Area (Right Side Panel)
Note: For avoiding confusion it is recommended to create a folder in which we are creating System Object.
4) Right Click on Portal Content, select New -> System (from Template)
5) This action will display a new view on right side, now choose Web Service System using WSDL URL radio button from the existing templates. Click Next
6) Give the System Name i.e. System_WS and System Id (which are mandatory fields) incase you want to give any brief notes about the system then give it in Description field. Click Finish.
8) Choose Open the object for editing Click OK.
9) Now to create a Web Service System, we need WSDL URL.
10) There are lots of freely available WSDL files on internet, search for any such WSDL file.
11) In the Properties area of system give the appropriate WSDL URL
12) Choose System alias, from display menu and give alias as System_WS.
This alias name will be the name of Web Service System.
I used the following url
http://soap.amazon.com/schemas2/AmazonWebServices.wsdl
After the system is created,
1) Right click on the created system> open > object
2) Drop down for Display options is changed to Connection Tests from what it shows as object
3) Check the check box for the test name Connection Test for Connectors
4) Result shows that the connection failed. The error message was posted in my first question.
Thanks,
Atul

Problem creating web service client using WSM Policies

Hello everyone,
I'm trying to make a simple java client to a Web Service secured using a WSM 11gR1 policy (from Soa Suite 11.1.1.2.0). The policy on the server side is oracle/wss11_x509_token_with_message_protection_service_policy which I attached via the Weblogic Admin Console. To implement the client I'm trying to follow the instructions from this documentation: http://download.oracle.com/docs/cd/E15523_01/web.1111/e13713/owsm_appendix.htm#WSSOV386 section "Policy Configuration Overrides for the Web Service Client" and also I'm using OEPE 11.1.1.3.0 (Eclipse 3.5.0) to develop the client. The only weblogic jar I've added to the build path is the weblogic.jar . Unfortunately, the oracle.wsm.security.util.SecurityConstants.ClientConstants interface (used in the example A-6) is not included in this jar and I have no idea what other libraries should I include in order to follow the example. I tried manualy adding other jars but without success. In fact I found one jar which includes this interface, the wsm-secpol.jar but it does not have the properties described in the documentation, so I guess it's not the right jar, and also I don't think this is the right procedure since there might be another dependent jars. So I would like to know what libraries exactly I should add to the build path (or some other procedure if you noticed I'm doing anything wrong)
Thank you !

Hi
I am having the same problem almost where i wrote a client to comsume a JWS server in https. Where the server is setup to require a certificate to connect to.
My code:
public static void main(String[] args) {
try {
DataBaseSyncServerImpl port = new DataBaseSyncServerImplService().getDataBaseSyncServerImplPort();
int number1 = 20;
int number2 = 10;
System.out.printf("Invoking divide method(%d, %d)\n", number1, number2);
double result = port.divide(number1, number2);
System.out.printf("The result of dividing %d and %d is %f.\n\n", number1, number2, result);
when run this code throw
run:
[java] Invoking divide method(20, 10)
[java] Exception in thread "main" javax.xml.ws.WebServiceException: HTTP transport error: javax.net.ssl.SSLHandshak
eException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCert
PathBuilderException: unable to find valid certification path to requested target
Does any one know how can I solve this problem or how can I make the client be able to use self signed certificates. Any help is greatly apprecited. Thanks

Web Service Project using WSDL file

Hi All,
I want to create web service project using WSDL file(I already have a wsdl file), which needs axis2 run time to generate correct project structure, I did this in eclipse but now I want to do it through JDeveloper(11.1.2.0.0), so please suggest me any ways on how can I configure axis2 runtime in Jdeveloper, and is it possible do it in Jdevloper?
Thank You,
Sunny
Edited by: Sunny on May 8, 2012 1:51 AM

Have you installed the 64-bit Access driver on your machine? See
Data Source Names and 64-Bit Operating Systems for the differences in odbcad32. Call %SystemRoot%\system32\odbcad32.exe to check the drivers.
How do you host your service? Stand-alone or IIS or embedded to another application? Keep in mind that IIS7 runs it in its application pool which is defaullt 64bit. Thus the bad image exception, when compiling your service as 32bit.
When you need the Access database for your service to store informtation, then I would switch to SQL Server (Express) or XML files depending on your actual needs.
Also check whether your account under which your service is run has the necessary NTFS file permissions on the access file and the folder. This is getting even more complex when it's a remote folder.

Error in web service creation : java.io.IOException: Non nillable element

hi,
i am new to web service, and i have to create web service.
i have wsdl file and i have to develop web service using that file only.
i am using eclipse 3.2 WTP, and apache tomcat server.
After importing file, when i am cretaing web service, i am getting msg,
"could not retrieve the WSDL file
file:/D/Test/sample.wsdl Do u want to contiue to wait for this file? "
after that when i am creating web service client, using wsdl file, which is in Webcontent/wsdl/SampleWS.wsdl, i am getting same msg.
and when i am executing that i am getting error :
- Exception:
java.io.IOException: Non nillable element 'serialID' is null.
     at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:215)
     at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1502)
     at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:978)
     at org.apache.axis.encoding.SerializationContext.outputMultiRefs(SerializationContext.java:1053)
     at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:145)
     at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:478)
     at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
     at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
     at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
     at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
     at org.apache.axis.SOAPPart.getContentLength(SOAPPart.java:229)
     at org.apache.axis.Message.getContentLength(Message.java:510)
     at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:371)
     at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:2443)
     at org.apache.axis.client.Call.invoke(Call.java:2366)
     at org.apache.axis.client.Call.invoke(Call.java:1812)
     at com.innotrac.INOC_ATS_LOreal_inbound_servicesBindingStub.captureOrder(INOC_ATS_LOreal_inbound_servicesBindingStub.java:362)
     at com.innotrac.INOC_ATS_LOreal_inbound_servicesPortTypeProxy.captureOrder(INOC_ATS_LOreal_inbound_servicesPortTypeProxy.java:45)
     at org.apache.jsp.sampleINOC_005fATS_005fLOreal_005finbound_005fservicesPortTypeProxy.Result_jsp._jspService(Result_jsp.java:166)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:328)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:315)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     at java.lang.Thread.run(Unknown Source)
so, what is the error ?
error is in wsdl file..?
pls, help me...
its urgent...

Melanie_Green wrote:
Thank him with duke stars :)The old dangling-dukes problems. While I really don't care about them, I think it's unfair to promise something and then not go along with the promise ...
Give them to Mel ;-)

Errors installing web service to use dreamweaver extension

Similar Messages

Maybe you are looking for