Errors when packaging extension via Extension Manager Command Line

Hi all,
I am attempting to package an Adobe Fireworks extension via the CS6 Extension Manager command line tool:
/Applications/Adobe\ Extension\ Manager\ CS6/Adobe\ Extension\ Manager\ CS6.app/Contents/MacOS/Adobe\ Extension\ Manager\ CS6 -suppress -package product="Fireworks CS6" mxi="name.mxi" mxp="name.mxp"
I get the following error:
error: +++ Assert in file /export/home/coretech/source/daily/extendscript/scriptobjects/build/xcode24/../../source/ bridgetalk/source/SoBridgeTalk.cpp, line 117
+++ BridgeTalk::InitTerm::exit() has already been called.
Debugger() was called!
Does anyone have any suggestions on how to proceed?
Best,
Dmitriy

1. There is no "product" attribute in package command. Please remove it.
2. Why do you still package mxp? MXP has some limitations and is no longer supported in Extension Manager CC. You should package ZXP instead.
3. Extension Manager CS6 can't sign extension during package. We have a new free product called Adobe Exchange Packager which can package and sign extensions. You can sign in http://www.adobeexchange.com/ and go to Resources page to download it. The current version in this page can't package extension based on existing mxi file. The latest version meets your requirement and will be available in a couple of days.

Similar Messages

  • Getting error when using the "/parameter" switch in command line run

    Has anyone experienced this problem before?
    My report queries over 100,000 records from a view. When the report is run from the command line every thing works fine.
    But when I add a condition using a "parameter", although the report still runs fine from the destop, when launched from the command line it errs.
    "Oracle Discoverer Desktop has encountered a problem and needs to close. ..."
    "The instruction at "0x0044397c" referenced memory at "0x0000004e". The memory cound not be "read"...."
    I'm guessing its a memory issue with my PC. I've tested using a parameter with other reports using fewer records and it doesn't err from the command line.
    I can work around the issue by not using a parameter but then I have 20 versions of the same report each with a different condition.
    Any suggestions would be appreciated.
    Lise McGillis

    Hi Michael,
    I'm using an DELL Intel Pentium 4 CPU 3.00 GHz with 1 GB of RAM. We use Microsoft Windows XP Prof version 2002.
    As for Discoverer we are using 10G, Desktop Client 10.1.2.48.18 - 1047500 KB available memory , 2099744 KB Free disk space.
    I'm not sure I have acess to a computer with more RAM but I'm looking into it.
    What I'm frustrated by is the fact that the parameter works fine when run directly from the desktop but when passed from the command line it bombs... but only when dealing with mega records.
    Lise.

  • I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

    I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

    Urvergessen wrote:
    +You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
    Could not find that setting anywhere.
    It's in AirPort Utility, AirPort panel, Wireless tab.
    When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
    In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
    The second AP does show an IP address: 10.0.1.3.
    With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

  • Schedule Package Link via Data Manager

    Hi all,
    I create a schedule to run package link via data manager (excel) like below:
    But when I check the package link status, it show different start time like below:
    Anybody please help me explain what happen and how to solve this case.
    Thanks you in advance.
    Regards
    Agus Eryanta

    Hi Roberto,
    Yes I'm sure the package link is same.
    I was delete the package link status before March 2015, 12 before I realized the time is different.
    Regards
    Agus Eryanta

  • Error when getting service facade : Service manager initialization failed I

    Dear Friends,
          we have created entities in CAS((nwds 7.0.1)) and deployed in J2ee.
    During Testing:
             when we right click on entity and click on test.
    service Browser. is opening with two Buttons.
    One Button it is " start with CAF source".
    when we select this its throwing error
    Error text:
    Error when getting service facade : Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject. because of this we are unable to test the entity.
    request to throw pointers to clear this error.
    Answers will be rewared.
    Regards
    shekar chandra

    even if go using this url http://hostnae:portname/caf
    i could see the main page then i click TestTools->Service browsser, Still lso i am getting the same screen with Buttons.
    one saying "Start with CAF Source" @ other "Start with ABAP
    Source"
    If .ear is one of the cause I have removed all the projects from DC->.dtr.Now my NWDS is empty.
    Still why it is comming.
    Regards
    Shekar Chandra

  • Help packaging an android apk through command line

    Hello everyone.  I've recently developed an app that is near the release deadline and I've ran into the problem of low resolutions icons.  All of the troubleshooting I've done has claimed I'll need to manually package the app through the command line to do this.  I have never done this before so I'm having some trouble. 
    I've downloaded all of the required files I believe and have reached the correct bin folder, I'm completely clueless as to what syntax I need to type in from this point though.  I've gotten as far as "adt -package" which then outputs that I'm missing additional information, but as I said, I haven't used command promt much and I have no idea how to format the rest of the information I need to put in or how to attach my current app.xml file to it.
    Any help would be appreciated.
    Edit: Nevermind everyone.  After a lot  more time spent researching I've managed to piece together how to do it and actually understand it as well.

    Hi,
    Here is the command to package android apk through command line;
    <adt-path> -package -target <target-option e.g. apk, apk-debug etc> -storetype pkcs12 -keystore <your certificate> -storepass <password> name.apk app.xml name.swf assets
    Please run adt -help on terminal or cmd if you need any help regarding targets or packaging command. adt is available at you sdk/bin/adt folder.
    Also, you can see the page http://help.adobe.com/en_US/air/build/WS901d38e593cd1bac1e63e3d128cdca935b-8000.html for more details.
    Hope this will help.
    Regards,
    Nimit

  • Oracle VM Manager Command Line Interface

    Can anybody suggest any tool for Oracle VM Manager Command Line Interface?
    Are they free?
    What kind of jobs we can automate using Command line?
    If they are not free is it worth spending money to buy them?

    Try public-yum.oracle.com
    and look at the oracle-addons channel below OEL.
    http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/i386/
    Regards
    Sebastian

  • Achiving of reports uing catalog manager command line

    Hi ,
      I want to automate the archiving of reports using catalog manager  command line using Unix/Linux . Has anyone archived the reports like this . Please help . I am using OBIEE 11.1.1.6 and want to archive all the reports of the OBIEE catalog .

    You need to have the proper physical address of each report and corresponding files for that particular report to archive, you need to pass them as command line arguments.
    I would say it is time consuming process to validate your automation, more over you need to go with online mode to get security in place for catalog objects.
    I can feel the complex part thats the reason asked you to share the code

  • Solr errors when indexing custom file extensions.

    Greetings!
    I am working on my company's public website and need to be able to index the web pages.  The site is configured to read .ak files as .cfm files, but Soler errors when trying to read them.  While testing I found that if I remove the <head> tags from the documents there are no errors.  I've looked into the Solr config files for a location to tell Solr that .ak files should be parsed as html.  I have been unable to find such a setting, does one exist?
    Thanks for your help,
    Dave

    Hi,
    Are you able to manually add new extension to the list?
    Try the troubleshooter under “Advanced Options” or rebuild the index for a test.
    If doesn’t work, then let’s go deeper for this issue.
    Open registry, expand, HKEY_CLASSES_ROOT
    Under this entry, there should be a bunch of file types, I did a test, if I delete a file type in it, for example .txt, then when I open the index option again, advanced option, file type, I’ll no longer find the txt extension in the list, so you may check
    the keys in case the registry is broken.
    Regards
    Yolanda
    TechNet Community Support

  • Error when Packaging and PDF'ing File

    I am curently involved in creating a comprehensive brand book (60 pages) for our company in InDesign CS4 and seem to have a problem when I PDF or go to package the InDesign file. The message I get is:
    "Error encountered while reading JPEG image. Image may be damaged or incompatible. Resave the image with different settings and try again."
    Funny thing is when I close InDesign and re-open the file, then go to PDF it works fine. But then after I have worked on it and go to re-PDF it starts Ok but gets to about page 18 and the error pops up. I get the same error when I go to package the file even in the package summary - could not figure out what was wrong. I tried deleting all images off that page then re-PDF and still does not work.
    What's worse is that InDesign does not provide detailed information regarding the image or error, I had to look where the bar stopped while I was in the process of PDF to figure out what page the image is on.
    Can anyone shed some light on this?
    Thanks

    Here is an earlier thread discussing this problem:
    http://www.adobeforums.com/webx?128@@.59b7927d
    There's some unrelated stuff in the middle, but relevant information at both ends.
    Peter

  • Error when using 'service in0/0 session' command.

    Good morning everyone,
    I'm having difficulties with one of my companies UC500 systems. It has been sitting for a number of months with no use, and we're putting it back in to production. When I attempt to take it offline to backup it's old config, I get a kernel panic (the full error is attached below). I can stop the panic and get it back to a working state. But in the course of doing that, the system won't save any config changes I have made. Are the hda1 errors on the bottom of the message anything to do with the CF cards? Can anyone tell me what I am doing wrong?
    Thanks,
    Stephen.
    Here is the error dump:
    Trying to shutdown Service Module Integrated-Service-Engine0/0
    Cisco BootMon Version: 1.0.2
    (Feb 27 2007 - 10:38:53) MPC83XX
    Bootmon starts
    Bootmon: cold reset.
    System now booting.
    Bootmon: reading primary bootloader image
    Bootmon: calling bootloader
    Cisco ServiceEngine Bootloader Version: 1.0.3
    (Jul  6 2007 - 10:15:37) MPC83XX
    Resetting devices ....Done.
    mac address for internal ethernet 00:1b:7a:42:55:de
    Please enter '***' to change boot configuration:
    ServicesEngine Bootloader Version : 1.0.3
    kern_sz: 1208148
    bl_boot_cf_cmd root=/dev/hda1 install_root=ide ro plat=freddo
    ## Booting image at 04000000 ...
       Image Name:   Linux-2.6.11.11-ppc
       Image Type:   PowerPC Linux Kernel Image (gzip compressed)
       Data Size:    1208084 Bytes =  1.2 MB
       Load Address: 00000000
       Entry Point:  00000000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ... OK
    Linux version 2.6.11.11 (drodrig@fndn-bld-system1) (gcc version 3.4.3) #1 Fri Jan 25 19:10:11 PST 2008
    Built 1 zonelists
    Kernel command line: root=/dev/hda1 install_root=ide ro plat=freddo
    IPIC (128 IRQ sources, 8 External IRQs) at fe000700
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 514944k available (2036k kernel code, 552k data, 124k init, 0k highmem)
    Kernel Log Buffers loaded at 0xdfe80000, size: 524288 bytes
    Trace Buffers loaded at 0xdff00000, size: 1048576 bytes
    in atrace_init
    log_head: h: 0, t: 0, l: 0, w: 0, s: 1047488
    Using existing trace log
    log_head: h: 0, t: 0, l: 0, w: 0, s: 1047488
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    NET: Registered protocol family 16
    PCI: Probing PCI hardware
    PCI: Cannot allocate resource region 0 of device 0000:00:00.0
    PCI: Cannot allocate resource region 2 of device 0000:00:00.0
    PCI: Failed to allocate mem resource #2:80000000@80000000 for 0000:00:00.0
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    devfs: 2004-01-31 Richard Gooch ([email protected])
    devfs: devfs_debug: 0x0
    devfs: boot_options: 0x1
    Cisco ContentEngine Flash Driver Version 0.02
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    ttyS0 at MMIO 0xe0004500 (irq = 9) is a 16550A
    ttyS1 at MMIO 0xe0004600 (irq = 10) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
    loop: loaded (max 8 devices)
    GFAR: MTU = 1500 (frame size=1518,rx_buffer_size=1536,truesize=1784,sk_buff=152)
    eth0: Gianfar Ethernet Controller Version 1.1, 00:1b:7a:42:55:de
    eth0: Running with NAPI enabled
    Weight = 32
    eth0: 32/32 RX/TX BD ring size
    eth0: PHY is PHY-less
    GFAR: MTU = 1500 (frame size=1518,rx_buffer_size=1536,truesize=1784,sk_buff=152)
    eth1: Gianfar Ethernet Controller Version 1.1, 00:1b:7a:42:55:df
    eth1: Running with NAPI enabled
    Weight = 32
    eth1: 32/32 RX/TX BD ring size
    eth1: PHY is PHY-less
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
    hda: STI Flash 7.4.2, CFA DISK drive
    hdb: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
    hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x0a)
    ide0 at 0xe1000000-0xe1000007,0xe100280d on irq 17
    hda: max request size: 128KiB
    hda: 2001888 sectors (1024 MB), CHS=1986/16/63
    /dev/ide/host0/bus0/target0/lun0: p1 p2
    ehci_hcd 0000:00:12.2: EHCI Host Controller
    ehci_hcd 0000:00:12.2: irq 18, pci mem 0x7fffef00
    ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:12.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    i2c /dev entries driver
    NET: Registered protocol family 2
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Exporting platform capabilities
    /dev/ide/host0/bus0/target0/lun0: p1 p2
    ReiserFS: hda1: found reiserfs format "3.6" with standard journal
    ReiserFS: hda1: using ordered data mode
    ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda1: checking transaction log (hda1)
    ReiserFS: hda1: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Mounted devfs on /dev
    hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: task_in_intr: error=0x40 { UncorrectableError }, LBAsect=1321204, sector=1321204
    ide: failed opcode was: unknown
    end_request: I/O error, dev hda, sector 1321204
    ReiserFS: hda1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [5962 5985 0x0 SD]
    hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: task_in_intr: error=0x40 { UncorrectableError }, LBAsect=1321204, sector=1321204
    ide: failed opcode was: unknown
    end_request: I/O error, dev hda, sector 1321204
    ReiserFS: hda1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [5962 5985 0x0 SD]
    hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: task_in_intr: error=0x40 { UncorrectableError }, LBAsect=1321204, sector=1321204
    ide: failed opcode was: unknown
    end_request: I/O error, dev hda, sector 1321204
    ReiserFS: hda1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [5962 5992 0x0 SD]
    Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
    <0>Rebooting in 180 seconds..

    Stephen,
    The errors look to indicate that the information stored on the CFcard is corrupt. You'll need to re-install CUE through the boot loader. If that fails, then an RMA of the CF card may be necessary.
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/installation/guide/boothelp31.html
    -Felipe

  • 'System Error' when trying to save Form Manager Registry Settings

    Hi,
    trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
    > System Error
    >
    The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
    Has anyone had this error as well?
    The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
    SpyJMSException.
    Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
    Regards,
    Steve

    We are using JBoss 3.2.5.
    Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
    Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

  • Getting error when trying to open Job Manager

    Hi List
    we are getting the below error when trying to open the Job Manager,which worked fine until yesterday.
    [nqs error 46105] Error executing Process: "C:\Program Files\Java\jdk1.6.0\bin\javaw.exe" - Xmx1024m -cp D:\OracleBI\server\Bin\JobManager\startup.jar org.eclipse.core.launcher.Main -data D:\OracleBIData\jobmanager -configuration C:\OracleBIData\jobmanager The system cannot find the path specified
    Please advice.
    Thanks..

    Did you change your JDK path by any chance? Also you are getting a strange error message. It is trying to point to both D:\OracleBIData\jobmanager and C:\OracleBIData\jobmanager. Is there anything that you changed prior to doing this?
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • Error When Downloading Config via TFTP

    I have 2 different 4400 series controllers running vastly different version of code (7.0.98.0 & 4.1.185.0) that both give me this error when attempting to download the config via TFTP: "TFTP Code File type not supported!"
    I have successfully downloaded the configs off 9 other controllers without issue.
    Any ideas?
    Thanks.

    Arcticmonkey7520 I would recommend downloading a fresh copy of the installation files from Download CS6 products.
    If you continue to receive the same error then please check your PDApp.log for error messages.  You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • Internal Server Error  when trying to upload and manage files

    The instructor was experiencing this difficulty on Tuesday 1/13, after the notice was closed. I just
    went into their site again(1/14/09 2:48pm), launched iTunes U and received the same error after clicking on 'Upload And Manage Files' in their iTunes U page.
    I was able to reproduce the same error on our iTunes U site.
    https://deimos.apple.com/WebObjects/Core.woa/EditFiles/indiana.edu

    I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
    /Indiana University/Project Sites/Oncourse Team - FAIL
    /Indiana University/Project Sites/SyllabusTest - Success
    /Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
    /Indiana University/Project Sites/UITS Podcast Team - FAIL
    /Indiana University/Project Sites/ePortfolio Playgroun - FAIL
    /Indiana University/Project Sites/Testong - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

Maybe you are looking for