ESS code into NetWeaver Developer Studio

Hi ,
Were it the ESS/MSS code to import to the NetWeaver Developer Studio ? And how do we import it ?
Any feelback is welcome
Regard's.

@C. Schutz
Achim is putting you on the right track for WebDynpro based ESS/MSS services....and even Java(JSP) versions. Your post was a bit vague though. What is the backend you are using and exactly what are you trying to pull into NWDS?
In general, for ECC5.0 and higher webdynpros and such, Achim put you on the right path. Setting up NWDI will be the biggest hurdle there...do not take it lightly!
For several other services however, any customization/coding you need to do can be done on the backend system in SE80.
Again....it really all depends...can you post more info?

Similar Messages

Integrate Adobe LIfeCycle Designer 8.0 into NetWeaver Development Studio 7

Hi everyone,
I need to integrate Adobe LIfeCycle Designer 8.0 into NetWeaver Development Studio, the issue is that I have installed Adobe LifeCycle but I wanted to know how in integrated into Netweaver Development Studio 7.0
Thanks very much in advance,
Armando

Hello Armando,
If u have installed NWDS, during the NWDS there is a checkbox to include Adobe LiveCycle Designer.However , NWDS 7 setup includes designer 6.0.
Case 1 : If u have not checked the above checkbox during NWDS installation.You can directly install any Designer version.
Case 2 : If u have checked the checkbox during NWDS installation , when u install designer 7 or 8 it will give a message saying A version of designer already exists,In the above scenario, you will have to either uninstall desginer 6(if possible) or reinstall NWDS without checking the Desinger Checkbox.After that you can install any designer version u want.
Hope it helps,
Regards,
Virag

How to download project template into the SAP NetWeaver Developer Studio

Hi,
I want to download project template into the SAP NetWeaver Developer Studio related to invoice detail get detail,get list etc.
How to do so?Actualy my requirement is to create an iView whcih contain the detail about the invoice.
Thank,
Kundan

Hi
If you have zip file of the project then unzip it into your project location where all projects are there .then in NWDS go to file->import->multiple existing project into workspace->browse the file where you have saved it and select the comp folder inside the project folder->click finish.Now you are able to see the webdynpro project in the webdynpro explorer.If its not appearing then go to Navigatore and right click on project and click on open project, it will open the project in webDynpro explorer.
Thanks
Susmita

Download of SAP Netweaver Developer studio

Hi,
I want to download SAP Netweaver developer studio.
I searched on service.sap.com where I could find some support packages but not any installable.
Where will I find the full installable(exe)
Can I install SAP netweaver developer studio using these support packages. How do I install using the support packages.
We have SAP MI 2.5 SP09 installed on our system. Which service pack of SAP Netweaver developer studio should I install.
Regards
Raja Sekhar

hi Raja,
There are already some posts in WebAS general on how to upgrade your WebAS. kindly search for them. As far as i know there are no documentation available for upgradation.
At the max, it should take only 10-14 hours to upgrade.
The upgradation goes like this :-
*. Stop the server
1. Kernal Patch - after this start the server.
2. SPAM Patch - Transaction code SPAM in client 000 user DDIC.
3. ABAP Patch - Transaction code SAPM in client 000 user DDIC.
4. J2EE Patch - A Installable like SAPinst.exe file
You can jump from sp09 to sp14 for J2EE stack right away.
But for ABAP patches, you should go step by step. ie. you have to add patches 09,10,11,12,13,14 - all of it can be found from Service.sap.com/swdc. you may do it at one go - by putting them in a queue in SAPM and let the system do it one by one. The same procedure for SPAM Patches (level 19) - yours will be in level 17.
Kernel patch is just copy pasting the files into its directory. it will get over in no time.
Regards
Arun.

Source control for SAP Netweaver development studio

Hi
Which source control product would be best to use with SAP Netweaver development studio?
And how do i integrate it into SAP Netweaver development studio? I've had a look through the various menus and settings in SAP Netweaver development studio and havent found any options for using a source control product to secure my java code.
Thnx

one way is to use NWDI for your code management.
/people/robert.schimansky/blog/2009/04/09/maintain-pi-71-adapter-modules-in-nwdi

Problems deploying par file via Netweaver Developer Studio

Hello,
I have problems deploying a par file using the SAP Netweaver Developer Studio.
In the SNWDS i configure the following:
Window -> Preferences -> SAP Enterprise Portal
Alias: IEP
Host: khz059
Port: 52900
Login: Administrator
Description: Testportal
The logon Url of the portal is http://khz059:5290052900/irj/portal
If i try to upload a par file via "Quick PAR Upload" i get the error messages:
"Unable to connect to the portal
Operation failed: Please make sure the server 'IEP' (khz059:52900) is running or check the log (sap-plugin.log) for more detail."
Am I using the proper settings? Am I using the wrong port?
I don't know whats wrong.
Can anyone help me?
The logfile shows:
[12.09.05 / 14:53] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.io.IOException: Error writing to server
 at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:302)
 at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:314)
 at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:634)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:361)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:433)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:220)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:404)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:338)
 at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
 at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
 at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:519)
 at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
 at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
 at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
 at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
 at org.eclipse.jface.window.Window.open(Window.java:563)
 at com.sap.portal.developmentTools.general.uploader.QuickPARUploader.run(QuickPARUploader.java:146)
 at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
 at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
 at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
 at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
 at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
 at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
 at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
 at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
 at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
 at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
 at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Best regards,
Nils Kloth

Hi Nils,
I think you must have selected the defualt checkbox (Try and uncheck that). Also uncheck the checkbox for "Yes, I want to remeber the password for deployment" if it is also selected. When you deploy the par file now enter the password and try to deploy. I think this will solve your problem.
Apart from this, try this methos of deploying the Par file.
1) Save you project. Right click it and "Quick par Upload".
2) On your browser type
"http://<your_server_name>:50000/irj/servlet/prt/portal/"
Your case:
http://khz059:52900/irj/servlet/prt/portal/
or same page you can get by navigating:
System Administration-> Support-> Portal Runtime-> Administration Console.
3) At the option "Please specify a Portal Archive file (PAR) and press "upload" to store it into the PCD." Deploy your par file by giving the path.
Now you file is deployed on the server. If you want to create an Iview from this deployed .par file then :
1) On your portal. Follow the path: Content Administrator-> Portal Content -> Portal Content(sub-option). Right click -> New from par ->iView.
2) Here in the list you will find the par file which you have uploaded. Proceed as said.
3) You will finally have an iView. Right click it and preview it.
I hope this solves your problem.
Regards
Pravesh
PS: Please consider rewarding points if helpful.

J2EE Perspective Error in NetWeaver Developer Studio

Hi there,
I'm currently trying to get an existing EJB jar into the NetWeaver Developer Studio.
- I created a new EJBModule Project and imported all files into the EJBModule folder
- then I get "EJB Candidates"
- I include all these candidates into the ejb-jar.xml
- then I get a new structure below ejb-jar.xml where I can adjust all Bean settings.
Now the error:
When I close the Developer Studio and open it again. This structure is gone. I can't edit the Beans settings and I can't create a jar file any more.
I'm using version 2.0.5
Please help!!! At the moment I have to create a new project every morning...
Thanks & regards
Katrin

Hi,
Search for DynPage class using jar class finder and add it to the portal application; and organize imports.
The problem will be solved.
Regards,
M.Subathra

ResourceBundle error in NetWeaver Developer Studio MI 2.5 SP16 Patch 3.

SAP NetWeaver Developer Studio
Version: 2.0.19
Build id: 200610270428
MDK Mobile Development Kit Tools v2.5.13
Java: j2sdk 1.4.0 Win
Mobile client: MI 2.5 SP16 Patch 3
Running MAU v1.0 SR 5
Downloaded:
MAM FOR UTILITIES 1 0 SP05 05042006
In the SAP NetWeaver Developer Studio I imported the MAU_eclipse.war from MAM FOR UTILITIES 1 0 SP05 05042006 using the MDK as MAU.war.
Yet, without implementing any changes, just to test, I exported the MAU project into a war file in the following path: C:\Program Files\SAP Mobile Infrastructure\webapps\MAU.war.
I renamed the existing folder C:\Program Files\SAP Mobile Infrastructure\webapps\MAU to MAU_Old
Then, I started MAU from within the NetWeaver Developer Studio by selecting Run, Run.
The client application launched and the new MAU.war file was automatically unpacked C:\Program Files\SAP Mobile Infrastructure\webapps\MAU
The application opens and can be successfully logged into from the SAP NetWeaver Developer Studio.
When the MOBILE ASSET MANAGEMENT FOR UTILITIES link is selected in the client application, error messages appear for example.
See below for the full error messages.
It appears the errors below might be somewhat straightforward, mentioning that the resource bundle could not be found.
Please assist regarding how to ensure the resource bundle can be found and properly loaded for example or what else could be the issue.
Please note that the application opens and can be successfully navigated by launching and logging into C:\Program Files\SAP Mobile Infrastructure\MobileEngine.exe directly.
The issue is launching from within the SAP NetWeaver Developer Studio for running or debugging.
Thanks in advance for your assistance.
Error in the console for the SAP NetWeaver Developer Studio:
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key dispatcher.forwardException
     at java.util.ResourceBundle.getObject(ResourceBundle.java:314)
     at java.util.ResourceBundle.getString(ResourceBundle.java:274)
     at org.apache.tomcat.util.StringManager.getString(StringManager.java:136)
     at org.apache.tomcat.util.StringManager.getString(StringManager.java:155)
     at org.apache.tomcat.util.StringManager.getString(StringManager.java:194)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
     at 0002fmam0005fstart_0002ejspmam_0005fstart_jsp_0._jspService(_0002fmam_0005fstart_0002ejspmam_0005fstart_jsp_0.java:62)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.servlet.JspServlet$JspCountedServlet.service(JspServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:282)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:429)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:500)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Thread.java:536)
Error on client is below:
Address: http://localhost:4444/MAU/start
Error: 500
Location: /MAU/home/home_mgmt.do
Internal Servlet Error:
javax.servlet.ServletException: cannot find message associated with key : dispatcher.forwardException
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
     at 0002fmam0005fstart_0002ejspmam_0005fstart_jsp_0._jspService(_0002fmam_0005fstart_0002ejspmam_0005fstart_jsp_0.java:62)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.servlet.JspServlet$JspCountedServlet.service(JspServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:282)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:429)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:500)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Thread.java:536)

Hello,
MDK plug in is as bad as NWDS itself. Since the mobile applications are really just a java application, you do not need special plugin for developing them. I STRONGLY suggest to take a look at this blog entry I did when I was working on MAM at SAP:
How to set up NWDS or Eclipse without MDK
Thank you,
Julien Guimont
msc mobile Canada inc.
http://www.msc-mobile.com

Netweaver Developer Studio JSPDynPage

I am developing a small app using JSPDynPage. when i try to open the JSP page in the pagelet folder. Instead of opening the file in the editor, its asking for whether i want to save it or open the file.If i say open it opens in a notepad, if i say cancel I am getting the below message.i can see the source code when i click the source tab. I am using demo version of Netweaver developer studio. I think it s not finding right editor to open.
Action canceled
Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
Please try the following:
Click the Refresh button, or try again later.
If you have visited this page previously and you want to view what has been stored on your computer, click File, and then click Work Offline.
For information about offline browsing with Internet Explorer, click the Help menu, and then click Contents and Index.
Thanks,
Sujatha

The problem has probably been caused by a file association made outside of Netweaver i.e. opened a .JSP file with notepad in Windows.
Deleting the association with .JSP files in the control panel should remedy the problem.
If you can't delete it using the normal method (through control panel, folder options, File types), remove the association by editing the registry.
As soon as I deleted the association it worked fine again.
Changing the file associations within Netweaver itself didn't work as it seems to rely on the association in the Windows registry. To change your editor in Netweaver use Window > Preferences > Workbench > File Associations.
Hope this helps anyone who encounters the problem.
Cheers,
Rob.

Netweaver developer studio(2.0.4) installation problem

I have installed netweaver developer studio 2.0.4.When i tried to open studio it is not opening and following exception is recorded in the log file.
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 16, 2004 11:15:42.942
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.RuntimeException: Could not find bootstrap code. Check location of boot plug-in or specify -boot.
     at org.eclipse.core.launcher.Main.searchForBoot(Main.java:492)
     at org.eclipse.core.launcher.Main.getBootPath(Main.java:438)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:281)
     at org.eclipse.core.launcher.Main.run(Main.java:747)
     at org.eclipse.core.launcher.Main.main(Main.java:583)
Thanks in advance

Wrong forum...try Web AS Preview Installation (even if your version is not preview) or Web AS general.
And check OSS Notes, of course.
Peter

SAP NetWeaver Developer Studio 2.0.5 and PDK

Hello,
when i installed the sap netweaver developer studio 2.0.5 have then i the pdk installed to, or have i to this separatelly? And when yes what i have to do in this case(how to install that?)? Which are the difference between with and without the pdk?
Tanks in advance,
Frank

The PDK contains documentation, examples, javadocs, and sample code for developing portal applications. You don't technically need the PDK to develop EP components, but it sure helps.
The plugins in SAP NWDS facilitate building and testing portal applications by creating the correct project structure within the Eclipse IDE (NWDS) and also assisting with the deployment of the application (creation of PAR files and uploading them to the portal). Again, you can build EP components without NWDS plugin, but the plugins sure make life a little easier. I do know people that use other IDEs and Ant build scripts for their EP development.
Hope this helps,
Will

SAP NetWeaver Developer Studio Question

Hi All,
My question is that which java library does SAP NetWeaver Developer Studio use consume SAP WSDL file?
Appreciate your advice.
Cheers,

1. Type https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/ into your browser
2. Enter your sap marketplace user and password in the popup
3. Click on "Download latest NWDS_platform.zip release" and the download will start
4. Unzip and install... done.
Here, the Installation Guide:
SAP NetWeaver Developer Studio 7.1 Overview

ABAP + BSP plugin for Netweaver Developer Studio

Hallo,
does an ABAP + BSP plugin for Netweaver Developer Studio exist? Or is considered to be developed in future?
Best regards,
Josef Motl

hi Josef
check this out:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap-code-samples/test drive the new abap editor.htm
I didn't try it yet. Thomas Jung did it, so I'm quite sure it does work.
cheers
daniel

SAP NetWeaver Developer Studio Integration

To whom it may concern,
I would like to integrate SAP product by using SAP NetWeaver Developer Studio. However, I do not know how to import those libraries into SAP NetWeaver Developer Studio and try with the coding. I have downloaded BusinessObjects Edge Series Trial version and wish I could try to integrate it using SAP NetWeaver Developer Studio.
Is there any guide for me please??
I really need your help and will appreciate it.
Thanks

Hi Oliver,
Sorry for asking the same thing because I really can't get any idea till now. I really need help because there is no expert around me that can help me.
Could you please explain to me and teach me how and what should I do now?
I really thank for your help
Regards
Lai Hung

NetWeaver Develop Studio debug problem

Hi all.
I am new to using NetWeaver Develop Studio. My team have 4 persons, so we use one remote WAS server as debug and running server.
I always use webdynpro debug method to debug the webdynpro application. But sometimes when I start the debug, it always returns me ' cannot connect to remote vm '. Sometimes I have to restart the remote server to solve this problem.
My question is
1. Whats can be the reason for this ' cannot connect to remote vm' ? How to solve it forever.
2. Is there any easy way to debug ? Because for remote server, my System.out.println() cannot works.
I just want to see whether some if {} else {} code have reach .
Thanks a lot.

Hi,
For starting ur debugging session on just follow this steps:
1)Go to j2ee engine tab-->Right-click the server node and then choose the appropriate function from the context menu.
Enable debugging of process in a Single Server Configuration.
2)Insert a break point in ur code where u want to c the result.
3)go to the debug menu>give a new webdynpro configuration>and give the name of the appln.
4)give debug to start debugging.this automatically switches to ur debug perspective.
5)There u can c the expected outcome.
Also check on to this link.This provides u step by step procedure.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/849170e3-0601-0010-d59e-ddfce735fac5
Hope this solves ur problem,
Regards,
Nagarajan.

ESS code into NetWeaver Developer Studio

Similar Messages

Maybe you are looking for