Event due to the System or SystemLandscape creation

Hi
Does portal runtime generates any kind of event,for any System or System landsacpe get created in PCD?
Thanks
arati

Hi Gurucharan,
Do you have any networks attached to the WBS?
Do they have any activities with planned costs?
Check report S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned.
If you see values in the 'RemOrdPlan' column, then your networks are being treated as commitments.
Regards,
Kent Bettisworth

Similar Messages

  • Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

    Hello,  Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive.  ruffly about 10 or so.  The Reboots happen randomly and do not create a dump file.  We have contacted Lenovo and they are
    not sure why its happening.  Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up.  I am also looking at using Procmon to dump to a file as well. 
    If anyone has any other ideas please let me know.
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    + System
      - Provider
       [ Name]  Microsoft-Windows-Kernel-Power
       [ Guid]  {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
       EventID 41
       Version 2
       Level 1
       Task 63
       Opcode 0
       Keywords 0x8000000000000002
      - TimeCreated
       [ SystemTime]  2012-02-01T00:02:48.677610900Z
       EventRecordID 8270
       Correlation
      - Execution
       [ ProcessID]  4
       [ ThreadID]  8
       Channel System
       Computer LR8K6TLC.cntr.thrivent.corp
      - Security
       [ UserID]  S-1-5-18
    - EventData
      BugcheckCode 0
      BugcheckParameter1 0x0
      BugcheckParameter2 0x0
      BugcheckParameter3 0x0
      BugcheckParameter4 0x0
      SleepInProgress false
      PowerButtonTimestamp 129725280988099400
    Event 89, Kernel-Power
    ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.            
    _PSV = 0K            
    _TC1 = 0            
    _TC2 = 0            
    _TSP = 0ms            
    _AC0 = 0K            
    _AC1 = 0K            
    _AC2 = 0K            
    _AC3 = 0K            
    _AC4 = 0K            
    _AC5 = 0K            
    _AC6 = 0K            
    _AC7 = 0K            
    _AC8 = 0K            
    _AC9 = 0K            
    _CRT = 371K            
    _HOT = 0K            
    _PSL - see event data.
    ---- Details
    +
    System
    Provider
    [ Name]
    Microsoft-Windows-Kernel-Power
    [ Guid]
    {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
    EventID
    89
    Version
    0
    Level
    4
    Task
    86
    Opcode
    0
    Keywords
    0x8000000000000020
    TimeCreated
    [ SystemTime]
    2012-02-01T00:02:49.270411900Z
    EventRecordID
    8271
    Correlation
    Execution
    [ ProcessID]
    4
    [ ThreadID]
    68
    Channel
    System
    Computer
    LR8K6TLC.cntr.thrivent.corp
    Security
    [ UserID]
    S-1-5-18
    EventData
    ThermalZoneDeviceInstanceLength
    21
    ThermalZoneDeviceInstance
    ACPI\ThermalZone\THM0
    AffinityCount
    1
    _PSV
    0
    _TC1
    0
    _TC2
    0
    _TSP
    0
    _AC0
    0
    _AC1
    0
    _AC2
    0
    _AC3
    0
    _AC4
    0
    _AC5
    0
    _AC6
    0
    _AC7
    0
    _AC8
    0
    _AC9
    0
    _CRT
    371
    _HOT
    0
    _PSL
    0000000000000000
    Thank you.

    We have tested and checked both the Bios and firmware of the SSD Drive's
    Bios was up to date and no issue
    Firmware was also up to date as well.  
    Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
    restart" off under Startup and Recovery) No dmp files as of yet.  Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
    Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue.  If anyone has any idea's to be able to capture what maybe happening that would
    be great.
    Thank you.

  • Capturing information that one new employee has joined in the system

    Hi
    How do I capture the information that one new employee has been joined in the system. Apart form per_all_people_f is there any table or some event that occures after joining the employee.

    Hi
    When a new employee comes into system a record will be created in per_all_people_f table thereby, telling the system of a creation of an employee.
    You can write a sql query which will check for new creation of records in papf table checking conditions with sysdate.So if in future any employee comes into
    system, an alert can be fired as per the requirement.
    Thanks

  • The system failed to flush data to the transaction log. Corruption may occur.

    We have a windows server 2008 R2 Virtual machine and we are getting the following Warning Event.
    Event 51 Volmgr
    The system failed to flush data to the transaction log.  Corruption may occur.
    Any idea what is wrong with this server? Why this event is occurring?

    Hi Jitender KT,
    Before going further, would you please let me know the complete error message that you can find (such as a
    screenshot if you can provide)? Please check and confirm in Event Viewer if there other related event you can find, such as Event 57 and so on. Meanwhile, can you remember what operations you have done before the warning occurred?
    Based on current message that you provided, please run
    Chkdsk command to check if you can find error. The issue seems to be related to the storage device. Please refer to the following similar question.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/044b10af-c253-46de-b40d-ce9d128b83d7/event-id-57-source-volmgr?forum=winservergen
    In addition, please also refer to the following link. It should be helpful.
    http://www.eventid.net/display-eventid-57-source-volmgr-eventno-8865-phase-1.htm
    Hope this helps.
    Best regards,
    Justin Gu

  • ITunes says I can update my software, but when I do this the system times out. Why is this and how can I get the update?

    I need to update my iPad 2 to the latest operating system. When I open iTunes it says that I can do this. I start the download and update. When it's done it says it failed due to the system time out. What does this mean and how can I fix it?

    disable your anti-virus and firewalls and try the update again.

  • Your request cannot be processed due to low system resources. Event ID 42443

    Post Author: mcsewnab
    CA Forum: General
    Hi all,
    We have a server that has hung up a few times in the past weeks. Before the server becomes unresponsive the event log show several of the errors below. The server still pings and attempts to authenticate an RDP session but all remote command time out. The server eventually needs to be hard booted. Utilization reports do not show a lack of available resources.
    I can't seem to find much on this error.
    Specifics are below. Thanks for any help.
    Event Type: WarningEvent Source: Crystal_cacheserverEvent Category: PageServer Event ID: 42443Date:  9/11/2007Time:  11:04:54 PMUser:  N/AComputer: Description:Your request cannot be processed due to low system resources.  Please contact your system administrator.
    Server specs:
    Quad XEON 3.33GHZ
    8 Gigs of RAM
    Plenty of free space.

    Hi,
    Is there a resolution to this, as I am having the same problem and I do not know where to start troubleshooting as the error is a litte vague.
    Greg

  • Windows 8.1 - Windows Couldn't connect to the System Event Notification Service service

    I have an issue that has been bothering me for a while on new 8.1 computers. Standard users are not able to log into the computer on the first try consistently. They receive the error message: Group Policy client service failed the sign-in access is
    denied. They are stuck at the logon screen.
    If an administrator logs in (local or domain), they can log in but get a black desktop with two error messages. The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable. The second error message is a popup
    balloon. It states "Failed to Connect to a Windows service. Windows couldn't connect to the System Event Notification Service service."
    When a standard user attempts to log in, event viewer records three warnings. They are listed in order from oldest to newest
    The winlogon notification subscriber <Profiles> was unavailable to handle a critical notification event. -Logged 9:14:44
    The winlogon notification subscriber <GPClient> failed a critical notification event. - Logged 9:14:44
    The winlogon notification subscriber <Profiles> was unavailable to handle a notification event. - Logged 9:14:49
    After a reboot, users still have the issue. I noticed that the user profile services and system event notification service are not running though their startup type is automatic. They start after a minute or two.

    Hi Joseph__Moody,
    Based on your description ,I assume it is a domain environment .First of all ,I would suggest you to try to update all the machine .
    "I have an issue that has been bothering me for a while on new 8.1 computers"
    Do you mean all the Windows 8.1 machine share the same symptom or just a specific one ?Did the machine work correctly before ?When did the issue start to occur ?Have you installed any third party software before ?Can we operate the machine when we login with
    an administrator account ?
    If the issue occurred with the specific machine :
    "The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable."
    Please try the following suggestions if we can operate the machine when we login with the administrator account :
    Open Windows Explorer and navigate to: C:\Windows\system32\config\systemprofile and verify if it has the Desktop folder there.If the folder doesn`t exit, we can copy from C:\users\Default\Desktop location(This folder is hidden by default).
    We also can try the following suggestions to have a troubleshoot :
    1.Run "sfc /scannow"or "dism /online /cleanup-image /restorehealth" to check the health of the system files.
    2.Perform a full scan with an antivirus software.
    3."They start after a minute or two."
    I suspect there is a third party service confilct here. Please perform a clean boot to verify whether there is a third party conflict here .
    How to perform a clean boot in Windows
    https://support.microsoft.com/en-us/kb/929135
    If the issue occurred with multiple machines in the domian ,I would suggest you to check whether you have configured any logon scripts and logon group policy .We can remove the machine from the domain to have  a troubleshoot .
    If the issue occurred recently ,we can perform a system restore to recover the machine to a previous normal point.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

  • I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

  • Failed to open package file due to error 0x800C0006 "The system cannot locate the file in C# code.

    Hi, Am facing issue when I try to run SSIS package via C# code, I have given full access to all the folder in which the package is available.
    In the below line am getting error,
    using Microsoft.SqlServer.DTS.Runtime;
    Application app=new Application();
    Package package=null;
    package=app.LoadPackage("PackageFullPath",null) --error line
    Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
    cannot locate the object specified.".  This occurs when loading a
    package and the file cannot be opened or loaded correctly into the XML document

    Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Service desk - message creation restricted to the system of the user

    hello guys,
    I would like that in the customer message creation the customor can see ONLY his system.
    At the moment when the customer log-in on the web page can see all the systems.
    would like to restrict this view.
    Anyone of you did that?
    any advise?

    The problem was solved using the link of workcenter.  This allow the view to be restricted

  • Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

  • ESE - Event Log Warning: 906 - A significant portion of the database buffer cache has been written out to the system paging file...

    Hello -
    We have 3 x EX2010 SP3 RU5 nodes in a cross-site DAG.
    Multi-role servers with 18 GB RAM [increased from 16 GB in an attempt to clear this warning without success].
    We run nightly backups on both nodes at the Primary Site.
    Node 1 backup covers all mailbox databases [active & passive].
    Node 2 backup covers the Public Folders database.
    The backups for each database are timed so they do not overlap.
    During each backup we get several of these event log warnings:
     Log Name:      Application
     Source:        ESE
     Date:          23/04/2014 00:47:22
     Event ID:      906
     Task Category: Performance
     Level:         Warning
     Keywords:      Classic
     User:          N/A
     Computer:      EX1.xxx.com
     Description:
     Information Store (5012) A significant portion of the database buffer cache has been written out to the system paging file.  This may result  in severe performance degradation.
     See help link for complete details of possible causes.
     Resident cache has fallen by 42523 buffers (or 27%) in the last 903 seconds.
     Current Total Percent Resident: 26% (110122 of 421303 buffers)
    We've rescheduled the backups and the warning message occurences just move with the backup schedules.
    We're not aware of perceived end-user performance degradation, overnight backups in this time zone coincide with the business day for mailbox users in SEA.
    I raised a call with the Microsoft Enterprise Support folks, they had a look at BPA output and from their diagnostics tool. We have enough RAM and no major issues detected.
    They suggested McAfee AV could be the root of our problems, but we have v8.8 with EX2010 exceptions configured.
    Backup software is Asigra V12.2 with latest hotfixes.
    We're trying to clear up these warnings as they're throwing SCOM alerts and making a mess of availability reporting.
    Any suggestions please?
    Thanks in advance

    Having said all that, a colleague has suggested we just limit the amount of RAM available for the EX2010 DB cache
    Then it won't have to start releasing RAM when the backup runs, and won't throw SCOM alerts
    This attribute should do it...
    msExchESEParamCacheSizeMax
    http://technet.microsoft.com/en-us/library/ee832793.aspx
    Give me a shout if this is a bad idea
    Thanks

  • How can I check and change the system set events trace level?

    Dear all:
    How can I check the system set events trace level? I don't want the alert_log so big.
    Regards
    Terry

    Hi Terry;
    Please check :
    How to determine which system events are currently being set? [ID 845043.1]
    How To List All The Named Events Set For A Database [ID 436036.1]
    How to set EVENTS in the SPFILE [ID 160178.1]
    Also check:
    http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
    http://www.akadia.com/services/ora_events.html
    Hope it helps
    Regard
    Helios

  • Event ID - 13568 The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

    We had a major storm over the weekend which caused an unexpected shutdown.
    I am having an issue with one of my domain controller with Event ID 13568
    The domain controller which is running Windows Server 2012 was added successfully just a couple of days ago.
    I do not have a full backup of the server yet.
    It only has a GC role on it.
    What are the things I should look out for before I attempt to Enable Journal Wrap Automatic Restore and set it to 1?
    Would it be safer to just demote the server and start from scratch?
    Thank you all for reading!
    Mladen
    The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
     Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
     Replica root path is   : "c:\windows\sysvol\domain"
     Replica root volume is : "\\.\C:"
     A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found.  This can occur because of one of the following reasons.
     [1] Volume "\\.\C:" has been formatted.
     [2] The NTFS USN journal on volume "\\.\C:" has been deleted.
     [3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
     [4] File Replication Service was not running on this computer for a long time.
     [5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
     Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this
    error state.
     [1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs"
    followed by "net start ntfrs" to restart the File Replication Service.
     [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
    WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from
    making the data unexpectedly unavailable if this error condition occurs again.
    To change this registry parameter, run regedit.
    Click on Start, Run and type regedit.
    Expand HKEY_LOCAL_MACHINE.
    Click down the key path:
       "System\CurrentControlSet\Services\NtFrs\Parameters"
    Double click on the value name
       "Enable Journal Wrap Automatic Restore"
    and update the value.
    If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

    I set Enable Journal Wrap Automatic Restore to 1 and it was
    successful.
    I will monitor it to make sure it does not occur again.
    Thanks everyone on your replies
    Mladen

  • [svn:osmf:] 13027: Fix bug in SerialElement where the durationReached event was dispatched on a child-to-child transition due to the base class thinking that the duration had been reached  (since the second child didn't have a duration yet).

    Revision: 13027
    Revision: 13027
    Author:   [email protected]
    Date:     2009-12-16 18:09:46 -0800 (Wed, 16 Dec 2009)
    Log Message:
    Fix bug in SerialElement where the durationReached event was dispatched on a child-to-child transition due to the base class thinking that the duration had been reached (since the second child didn't have a duration yet).  Injection from trait refactoring.
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/composition/CompositeTimeTrait.as

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

Maybe you are looking for