Event Filter Query Functionality
An WMI Event Query Filter online solution I do not understand what to do. It seems to reference back to do a new clean install on my system, which I bought and installed a new clean system a couple of months ago and have been trying to recover years of lost
Programs, Emails, Installations etc. Why would I ever need to do a third install of my MS Win 7 64 again? I have pasted the event below, not sure what to do other than another install, which I am not doing, for MS Support and my Laptop builder advised to do
twice before. I can not fathom what a third installation would fix, cure or accomplish.
OS=Windows Operating System, ID=10, SOURCE=Microsoft-Windows-WMI , VERSION=6.1, SYMBOLIC NAME=WBEM_MC_CANNOT_ACTIVATE_FILTER, MESSAGE=Event filter with query "%2" could not be activated again
in namespace "%1" because of error %3. Events may not be delivered through this filter until the problem is corrected.
Does anyone have a good solution that would work other than new OS installation?
Hi Triman2,
This is SQL Server Analysis Services forum, it seems that you issue is related to Windows 7. Since we are not the expert of Windows 7, please post your issue on the forum below.
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
Is there a way to achieve 'Panel Resize Event Filter' like function?
Gopalakrishnan P
Hi all,
Panel resize filter is not available in Event structure. So if I use the below code, on pressing the maximize button, windows will maximize the front panel and later LabVIEW brings it back to the mentioned size. There will be a flicker during this operation. To avoid this flicker, is it possible to disable windows OS to perform maximize event or to set the default window maximum size in windows or any other way to implement this?
The maximize button should not be disabled, but have to maximize the panel to a specific size without that flicker. What I'm actually trying to do is to use windows messaging queue to capture the maximize event and then implement the same through LabVIEW. Related example is in this link http://zone.ni.com/devzone/cda/epd/p/id/4394
Has anyone tried solving a similar problem by this method?
Also please suggest if there is any other way to achieve this.
Gopal
Thanks,Hi Krishgopal,
Please try the following method
File»VI Properties and choose Window Appearance from
the Category pull-down menu.
Click the Customize button and Deselect the option : Allow user the resize window
Attached is a screenshot of the same.
Please let me know if this is able to help you out.
Regards,
Ankur
Attachments:
No_Resize_Front_Panel.pdf 274 KB
Sample_NoResize.vi 6 KB -
Only an Event Filter for my Addon !?
hi,
is it possible to set the event filter only for my addon and not for standard function or other addons ?
in my addon i'm usin a crystal report viewer. So i catch the Menu_CLICK-event 519 (preview) and 520 (print)
But when i use the event filter on a special form, the event Filter is set for the whole Business One.
For example, i set my filter on form 139. But if the user print on other forms (140, 133,...) the standard PLD should work !
What is going wrong?
oFilters = New SAPbouiCOM.EventFilters()
oFilter = oFilters.Add SAPbouiCOM.BoEventTypes.et_MENU_CLICK)
oFilter.AddEx("139") 'Formular
moSBOApplication.SetFilter(oFilters)
regards
MarkusHi Rasmus,
thanks for help. Everything works fine now. I made some mistakes with the bubbleevent
thanks
Markus -
Call GET_SEARCH_REASULT service from scheduler event filter Iin UCM
Hi,
In our application, the mail should get sent to the content author on content revised date. For that, we have written a scheduler event filter component which will get invoked after every five minutes. In filter class I want to call GET_SEARCH_REASULTS service to get the list of contents and its authors to send mail.
Can anybody please tell me how to call GET_SEARCH_REASULTS service from scheduler event filter?
Thanks in advance.Hi Nitin
Why cant you try writing custom query and custom service ?
Please refer idoc script reference guide for getting the parametrs to be passed when using Get_search_results. -
My desktop windows 7 locked up twice this morning. Has been doing it more often recently. I found this twice in my log each at the time of lock up.
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because
of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
I've had to hold the power button down to turn the computer off. Won't respond any other way. PLEASE HELP!"skipAccountAndMetaDataSecurityCheck" is a filter EVENT.
You need to create a component (Java) and hook it to this event.
//Java class
package MyPackage;
public class MyFilter implements FilterImplementor
public int doFilter(Workspace ws, DataBinder binder, ExecutionContext cxt)
throws DataException, ServiceException
//Some code here;
cxt.setReturnValue(true)
return CONTINUE;
//HDA file
@ResultSet Filters
4
type
location
parameter
loadOrder
skipAccountAndMetaDataSecurityCheck
MyPackage.MyFilter
null
1
@end
Hop it helps.
Edited by: ITower on Jun 2, 2010 3:12 PM
Edited by: ITower on Jun 2, 2010 3:13 PM -
Using record filter query to handle behavior of facets
Hi all,
I know for multiselect/single dimensions we should always perform a dimension query to populate the behaviour of our faceted navigation , but i still want to understand if instead of dimension query i perform a record filter query on my facets click then what all flexibility will i loose with the multi select/single select facets.
Regards,
Edited by: IKumar on Apr 7, 2012 11:48 AMHi.
In general record filters and navigation provide similar functionality (faceted search). Depending on your requirements, you can use one or the other or even a combination. There are two things related to records filters that you need to be aware of when considering their use in a scenario like yours.
1. Record filters are applied as the very first step in the query evaluation. They are used to define a sub-set of the indexed data for further query evaluation. This can have an effect on spell corrections and DYM suggestions. Since the MDEX calculates spell corrections and DYM suggestions from the actual data and not based on an external dictionary, you may find that these are more "strict" when using record filters since a smaller data set is used for their evaluation. That said, I have not yet seen this become an issue in real projects for the last 8 years.
2. Record filters do not give you breadcrumb information. Incorporating the record filter as a breadcrumb will require some custom coding (custom = can't copy-paste from the reference app) and could become a bit complicated.
Regards
Pavlos -
Dear Sir/Mam
I want SQL query, function or SP which converts binary data to image (.jpg format).
I m able to convert image (.jpg format) to varbinary. But not able to convert vice versa.
thanks in advance.Binary data is binary data - "image" is only an intrepretation of binary data. Therefore your question makes little sense in the context of sql server since it does not have any facilities to utilize images. Since you provide no context, I'm
guessing that you are trying to retrieve an image stored in the database in a varbinary column and have your application use it as an image. If so, you should post your question to a forum that is specific to your development environment. -
My wife's email has been getting filled with hundereds of emails with this in them this morning. I don't see where anyone else is having this problem today, but I wanted to see if it's on iCloud's end or ours.
Processing errors occurred during delivery:
Recipient address: [email protected]
Reason: Error in sieve filter: Unknown function/variable found: church around input line 79 [ stop; } require " f^ileinto"; if header ]
Delivery processing continued in spite of these errors.
Reporting-MTA: dns;ms21034.mac.com (tcp_intranet-daemon)
Arrival-date: Tue, 13 Mar 2012 07:33:18 +0000 (GMT)My Wife and I both have an Ipad and an iPhone, I use an iMac and my wife a MacBook Pro.
I have this problem with all my devices.
My wife has NOT got this problem.
We both use a [email protected] email acount.
Just compared the settings:
For "Incoming server" I have p03-imap.mail.me.com
My Wife has p02-imap.mail.me.com .... and has not got this problem.
I have setup a new rule for incoming mails (for the meantime):
move all incoming emails from [email protected] to trash and delete it.
Works fine for now,......until APPLE deals with the problem.
Message was edited by: RTONLINE -
How to use OData Date filter query to filter data from OData NetWeaver Gateway Service?
Hello,
I am trying to use the OData Filter query. to filter data records from the OData Service, using Date range for filters.
Please check the below URL for the SAP's sample OData Service, with filter option.
Service Query URL :
https://sapes1.sapdevcenter.com/sap/opu/odata/sap/ZGWSAMPLE_SRV/SalesOrderCollection?$filter=CreatedAt eq DateTime
It gives out following error :->
<message xml:lang="en">'$filter ' is not a valid system query option</message>
Please let me know, if there is any mistake in the Query or is there anything that needs to be done on the
Backend Service.
Thanks & Regards,
Suraj KumarHi Jitendra,
Once again, thank you for your help.
I am able to filter the records using a date range.
I am sharing the information, just in case anyone out there might need it.
The OData Filter Query for Date Range (i.e. with Two date values) will return the results only if the OData Back-end Service is modified to accommodate such filter requests.
This has to be done in ABAP.
Please refer the following links which talks more about the Back-end ABAP Service being modified to ensure that the service returns records of data, as per the date range filter query
http://scn.sap.com/thread/3170195
http://scn.sap.com/blogs/lindsay.stanger/2012/12/29/gateway-odata-calls-convert-ivfilterstring-to-itfilterselectoptions
http://scn.sap.com/thread/3173146
Hope these links are helpful for those looking for OData Date Range filter query.
Do let me know.
Regards,
Suraj Kumar. -
Can I combine two bex querys by comining query function
Hi expert,
Can I combine two bex querys by comining query function?
Many Thanks,Hi,
Add a combined query function is not possbile by BICS connectivity.This is product limitation.
Regards,
Amit -
What are the main sap script events and their functionality and usage?
what are the main sap script events and their functionality and usage?
Hi,
Inside the Script, there are events like Top of Page, End of page etc.
Please elaborate about your requirement.
Best regards,
Prashant -
The Event read query was not supported
I have an error during a Search request in my collab suite calendar.
Here the soap message :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Header>
<auth:BasicAuth xmlns:auth="http://soap-authentication.org/2002/01/">
<Name>lde</Name>
<Password>xxxx</Password>
</auth:BasicAuth>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<cwsl:Search xmlns:cwsl="http://www.oracle.com/WebServices/Calendaring/1.0/">
<CmdId>test</CmdId>
<vQuery>
<From>VEVENT</From>
<Where>DTSTART >= '20061002T000000Z' AND DEND <= '20061002T235959Z'</Where>
<x-oracle-searchhandle></x-oracle-searchhandle>
<x-oracle-timestamp>20061002T113300Z</x-oracle-timestamp>
</vQuery>
</cwsl:Search>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
And the reply is :
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Server.Error::Data::CalEvent</faultcode>
<faultstring>The Event read query was not supported</faultstring>
<detail>
<cwsl:Error xmlns:cwsl="http://www.oracle.com/WebServices/Calendaring/1.0/">
<Class>Error::Data::CalEvent</Class>
<Code>000C-07-00-00000023</Code>
<Line>306</Line>
<FileName>UniapiQuery.cpp,v</FileName>
<Version>1.2</Version>
<LastMod>2005/04/26 16:47:36</LastMod>
<Author>kelsaid</Author>
<Date>Mon Oct 02 11:48:16 2006</Date>
<PID>30834</PID>
<TID>1124678576</TID>
</cwsl:Error>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
I haven't any errors with this sample.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Header>
<auth:BasicAuth xmlns:auth="http://soap-authentication.org/2002/01/">
<Name>lde</Name>
<Password>xxxxx</Password>
</auth:BasicAuth>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<cwsl:Search xmlns:cwsl="http://www.oracle.com/WebServices/Calendaring/1.0/">
<CmdId>test</CmdId>
<vQuery>
<From>VEVENT</From>
</vQuery>
</cwsl:Search>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Message was edited by:
Ludovic DESSEMONI resolved my problem. It was a syntax error :
<Where>DTSTART >= '20061002T000000Z' AND DTEND <= '20061002T235959Z'</Where>
and not :
<Where>DTSTART >= '20061002T000000Z' AND DEND <= '20061002T235959Z'</Where> -
Filter using Function resulting incorrect where cause
Hi,
I have a requirement wherein i have to filter a column based on a combination of mutiple hierarchy dimensions for which i am using Filter Using Function
ex.
Filter Metric A Using Dimesion A - Range 50 -100
Filter Metric A Using Dimension A - Range 25 - 50, Dimension B Range 0 -100
When i have a report with these metrics alone then it works fine but when both metrics are exposed on a single report
The where clause results in something like this
(Dimension A > 50 OR Dimnesion B > 0) AND (Dimension A > 25 OR Dimension A < 100 OR Dimesnion B < 100) AND Dimesnion A < 50
To sum it up its random and incorrect, any ideas as to why this could happen ??
Any pointers etc would be highly appreciated.Hi,
I have a requirement wherein i have to filter a column based on a combination of mutiple hierarchy dimensions for which i am using Filter Using Function
ex.
Filter Metric A Using Dimesion A - Range 50 -100
Filter Metric A Using Dimension A - Range 25 - 50, Dimension B Range 0 -100
When i have a report with these metrics alone then it works fine but when both metrics are exposed on a single report
The where clause results in something like this
(Dimension A > 50 OR Dimnesion B > 0) AND (Dimension A > 25 OR Dimension A < 100 OR Dimesnion B < 100) AND Dimesnion A < 50
To sum it up its random and incorrect, any ideas as to why this could happen ??
Any pointers etc would be highly appreciated. -
Query functionality in custom menu
Hi,
I have created my custom menu and attached to my form. when i compiled iam not able to see some standard functions like Query functionality. Is there any process to achieve query functionality in custom menu attached to formYou want to have something like an "Execute Query" in your menu. Add a menuitem of type PL/SQL and put the code
DO_KEY('EXECUTE_QUERY');Same procedure would be for other "query-menu"-items -
I tried to use the new method (AddEx) in event filter class to add filter to form that I've created myself by referring to formtype, but there is no filter done on this form. Anyone has encountered this problem before?
The code to create the user form is
Dim oCreationParams As SAPbouiCOM.FormCreationParams
oCreationParams = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
oCreationParams.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Fixed
oCreationParams.UniqueID = "MySimpleForm"
oCreationParams.FormType = "MyForm"
oForm = SBO_Application.Forms.AddEx(oCreationParams)
'// add a User Data Source to the form
oForm.DataSources.UserDataSources.Add("EditSource", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oForm.DataSources.UserDataSources.Add("CombSource", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
'// set the form properties
oForm.Title = "Simple Form"
oForm.Left = 400
oForm.Top = 100
oForm.ClientHeight = 80
oForm.ClientWidth = 350
The code to add event filter is:
oFilter.AddEx("139") 'Orders Form
oFilter.AddEx("MyForm") 'my form
oFilter = oFilters.Add(SAPbouiCOM.BoEventTypes.et_KEY_DOWN)
This code is not working.
Maybe you are looking for
-
How do I select rows from the same table that have multiple occurances
Hi Everybody, I am trying to select records from a detail table by grouping it. The table has more than 1 million records and the query is not performing well. The basic question is how to select a distinct record from a table which matches all value
-
I installed CS3 Design premium upgrade yesterday onto my new mac OS X Yosemite 10.10.1. You gave me a new serial number. I have been able to open Photoshop, Bridge, Dreamweaver and Flash. The Illustrator, Indesign and Acrobat applications are not in
-
Crystal Reports and Windows Server 2003 R2
Having huge issues with Crystal Reports for Visual Studio .NET 2010 Beta 2. I downloaded both the runtime and software as provided and restarted the pc. No matter what I do, I can not use it I get these errors in my IDE: Error 2 Custom tool error: "C
-
How to apply clock to a ADC from NI ELVIS II+ board
How to apply a clock to a ADC for ADC conversion from NI ELVIS II+. The input signal to ADC for conversion is 50 Hz applied from the function generator, now how to apply a CLOCK to this ADC for working. Please help....
-
I know this isn't directly related to iCal, but I was wondering if any of you have had similar challenges. I wrote a script that opens an online radio station when iCal tells it to to act as a sort of alarm clock for me. The only way that this works