Event Handler Header Extension Table

Scenario:
Currently, EH Header Extension Table ID (/SAPRCX/EHEXT) exist in system, based on /SAPRCX/EHEX table.
Tcode: /N/SAPTRX/TSC0ET (See attached file.)
Question:
If I want to add Fields to EH Header Extension Table ID (/SAPRCX/EHEXT) then How I can add new fields ?
or
How to create new EH Header Extension Table ID?
Thanks,
Chan Patel

I did exact steps.
1. Copy existing /SAPRCX/EHEXT Ext. Tab ID and create my own ZSAPRCXT ext. table ID. but is it says :
- No View table created.
SE11 There is predefined.table created like
/SAPRCX/V_EHEX
/SAPRCX/V_ELOC
/SAPRCX/V_EQPEXT
/SAPRCX/V_LEASE
2. When I create new Extension table.
Give Extension Table ID, Description and when I choose ...Extension table for selection:
Lenth of table gives me error..like
/1CADMC/00000134 example then it display only /1CADMC/00000,no full table name and give error this table don't have active version.
Is some came across this kind of error..
1. Error message:
Error Message:
View /SAPRCX/V_EHEX for extension table /SAPRCX/EHEX could not be
activated
Message no. /SAPTRX/TS_APP204
Diagnosis
A view is generated for each extension table when the Customizing data is
saved.
This view could not be activated.
System Response
The extension table is not used.
Procedure for System Administration
Check that the fields used in your extension table do not occur in table
/SAPTRX/EH_HDR.

Similar Messages

WPF UI running in seperate runspace - able to set/get controls via synchronized hash table, but referencing the control via the hash table from within an event handler causes both runspaces to hang.

I am trying to build a proof of concept where a WPF form is hosted in a seperate runspace and updates are handled from the primary shell/runspace. I have had some success thanks to a great article by Boe Prox, but I am having an issue I wanted to open up
to see if anyone had a suggestion.
My goals are as follows:
1.) Set control properties from the primary runspace (Completed)
2.) Get control properties from the primary runspace (Completed)
3.) Respond to WPF form events in the UI runspace from the primary runspace (Kind of broken).
I have the ability to read/write values to the form, but I am having difficulty with events. Specifically, I can fire and handle events, but the minute I try to reference the $SyncHash from within the event it appears to cause a blocking condition hanging both
runspaces. As a result, I am unable to update the form based on an event being fired by a control.
In the example below, the form is loaded and the following steps occur:
1.) Update-Combobox is called and it populates the combobox with a list of service names and selects the first item.
2.) update-textbox is called and sets the Text property of the textbox.
3.) The Text value of the textbox is read by the function read-textbox and output using write-host.
4.) An event handle is registered for the SelectionChanged event for the combobox to call the update-textbox function used earlier.
5.) If you change the selection on the combobox, the shell and UI hangs as soon as $SyncHash is referenced. I suspect this is causing some sort of blocking condition from multiple threads trying to access the synchronized nature of the hash table, but I am
unsure as to why / how to work around it. If you comment out the line "$SyncHash.TXT_Output.Dispatcher.Invoke("Send",[action]{$SyncHash.TXT_Output.Text = $Value})" within update-textbox the event handler will execute/complete.
$UI_JobScript =
try{
Function New-Form ([XML]$XAML_Form){
$XML_Node_Reader=(New-Object System.Xml.XmlNodeReader $XAML_Form)
[Windows.Markup.XamlReader]::Load($XML_Node_Reader)
try{
Add-Type –AssemblyName PresentationFramework
Add-Type –AssemblyName PresentationCore
Add-Type –AssemblyName WindowsBase
catch{
Throw "Unable to load the requisite Windows Presentation Foundation assemblies. Please verify that the .NET Framework 3.5 Service Pack 1 or later is installed on this system."
$Form = New-Form -XAML_Form $SyncHash.XAML_Form
$SyncHash.Form = $Form
$SyncHash.CMB_Services = $SyncHash.Form.FindName("CMB_Services")
$SyncHash.TXT_Output = $SyncHash.Form.FindName("TXT_Output")
$SyncHash.Form.ShowDialog() | Out-Null
$SyncHash.Error = $Error
catch{
write-host $_.Exception.Message
#End UI_JobScript
#Begin Main
add-type -AssemblyName WindowsBase
[XML]$XAML_Form = @"
<Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<Window.Resources>
<DataTemplate x:Key="DTMPL_Name">
<TextBlock Text="{Binding Path=Name}" />
</DataTemplate>
</Window.Resources>
<DockPanel LastChildFill="True">
<StackPanel Orientation="Horizontal" DockPanel.Dock="Top">
<Label Name="LBL_Services" Content="Services:" />
<ComboBox Name="CMB_Services" ItemTemplate="{StaticResource DTMPL_Name}"/>
</StackPanel>
<TextBox Name="TXT_Output"/>
</DockPanel>
</Window>
$SyncHash = [hashtable]::Synchronized(@{})
$SyncHash.Add("XAML_Form",$XAML_Form)
$SyncHash.Add("InitialScript", $InitialScript)
$Normal = [System.Windows.Threading.DispatcherPriority]::Normal
$UI_Runspace =[RunspaceFactory]::CreateRunspace()
$UI_Runspace.ApartmentState = [System.Threading.ApartmentState]::STA
$UI_Runspace.ThreadOptions = [System.Management.Automation.Runspaces.PSThreadOptions]::ReuseThread
$UI_Runspace.Open()
$UI_Runspace.SessionStateProxy.SetVariable("SyncHash",$SyncHash)
$UI_Pipeline = [PowerShell]::Create()
$UI_Pipeline.Runspace=$UI_Runspace
$UI_Pipeline.AddScript($UI_JobScript) | out-Null
$Job = $UI_Pipeline.BeginInvoke()
$SyncHash.ServiceList = get-service | select name, status | Sort-Object -Property Name
Function Update-Combobox{
write-host "`nBegin Update-Combobox [$(get-date)]"
$SyncHash.CMB_Services.Dispatcher.Invoke($Normal,[action]{$SyncHash.CMB_Services.ItemsSource = $SyncHash.ServiceList})
$SyncHash.CMB_Services.Dispatcher.Invoke($Normal,[action]{$SyncHash.CMB_Services.SelectedIndex = 0})
write-host "`End Update-Combobox [$(get-date)]"
Function Update-Textbox([string]$Value){
write-host "`nBegin Update-Textbox [$(get-date)]"
$SyncHash.TXT_Output.Dispatcher.Invoke("Send",[action]{$SyncHash.TXT_Output.Text = $Value})
write-host "End Update-Textbox [$(get-date)]"
Function Read-Textbox(){
write-host "`nBegin Read-Textbox [$(get-date)]"
$SyncHash.TXT_Output.Dispatcher.Invoke($Normal,[action]{$Global:Return = $SyncHash.TXT_Output.Text})
$Global:Return
remove-variable -Name Return -scope Global
write-host "End Read-Textbox [$(get-date)]"
#Give the form some time to load in the other runspace
$MaxWaitCycles = 5
while (($SyncHash.Form.IsInitialized -eq $Null)-and ($MaxWaitCycles -gt 0)){
Start-Sleep -Milliseconds 200
$MaxWaitCycles--
Update-ComboBox
Update-Textbox -Value $("Initial Load: $(get-date)")
Write-Host "Value Read From Textbox: $(Read-TextBox)"
Register-ObjectEvent -InputObject $SyncHash.CMB_Services -EventName SelectionChanged -SourceIdentifier "CMB_Services.SelectionChanged" -action {Update-Textbox -Value $("From Selection Changed Event: $(get-date)")}

Thanks again for the responses. This may not be possible, but I thought I would throw it out there. I appreciate your help in looking into this.
To clarify the "Respond to control events in the main runspace"... I'm would like to have an event generated by a form object in the UI runspace (ex: combo box selectionchanged event) trigger a delegate within the main runspace and have that delegate in
the main runspace update the form in the UI runspace.
ex:
1.) User changes selection on combo box generating form event
2.) Event calls delegate (which I have gotten to work)
3.) Delegate does some basic processing (works)
4.) Delegate attempts to update form in UI runspace (hangs)
As to the delegates / which runspace they are running in. I see the $synchash variable if I run get-var within a delegate, but I do not see the $Form variable so I am assuming that they are in the main runspace. Do you agree with that assumption?

BSP extension "download" - event handling problem

Folks,
First of all, I apologize if the answer is already out there, but I spent quite some time to find the solution for my problem but finally gave up:
I implemented the Download extension from Brian's and Tom's book. Since I am using an MVC based app, I put the event handling in the DO_HANDLE_EVENT of a controller instead of the OnInputProcessing event of a page. Here's how my app is designed:
I have a main controller that has an execute button to trigger a data selection based on some selection criteria. The result of this selection is displayed by means of a subcontroller with tableviews that are wrapped into my zdownload extension. Everything works fine: I make my selections, execute the app through the button of the main controller and get my result shown in the tableviews. I push the download icon, select my file format (XLS, HTML etc), get the dialog to choose whether to download or to display the file, perfect!
But now after I processed the download successfully - if I click the execute button in the main controller again, I still get the download dialog. It looks like the created event for the download does not get cleared. As I mentioned, I searched through SDN, but all I found were referrals to the call of DISPATCH_INPUT( ) in DO_REQUEST of the main controller, but unfortunately this one is already implemented.
Any ideas?
Thanks,
Guenther

There is an attribute of the download extension called display_url. You pass a value to the extension telling it what cached URL contains the binary content for your download. if this display_url attribute has a value assigned to it, then the element will render an iFrame to call the URl. However if the display_url attribute is empty, it won't render the iFrame. I suspect that you have a stateful application and after your download event you aren't clearing whatever field that you pass into the display_url attribute.

Populating database tables in event handler method - error

Friends,
I am trying to insert values into ztable in an event handler method in a WDA application.
This is the code. ZDATA1 is a ztable with two fields: MANDT and ZKTOKD of data element char01.
types: begin of zs,
zktokd type char01,
end of zs.
data: zitab type table of zs,
zstruct like line of zitab.
zstruct-zktokd = 's'.
append zstruct to zitab.
INSERT zdata1 FROM TABLE zitab.
I am getting the error: "The Work area "ZITAB" is not long enough...
Please let me know what is missing.
Thanks and Regards.

Hi,
The error is here
types: begin of zs,
zktokd type char01,
end of zs.
data: zitab type table of zs ,
zstruct like line of zitab.
"passed the Internal table name which is wrong
Correct one
data:
zitab type table of zs,
zstruct like line of ZS. " Here we have to give the type you have declared above.
" Zstruct acts like a workarea.
Regards
Lekha

Event Handling with Java API.: Adding to a hierarchy table throws 2events

I´m having some problems with the event handling. I´ve registered a Class with extends AbstractDataListener as EventListener. When there are changes in the product hierarchy table, some extra work should be done. However if i add a new record into the hierarchy, two events are fired.
DEBUG DataEventListener.java:123 - Added:Development;PRODUCT_HIERARCHY;R17;Getra?nke, SEW
DEBUG DataEventListener.java:123 - Added:Development;PRODUCT_HIERARCHY;R17;32 Zoll, B&R
DEBUG DataEventListener.java:123 - Added:Development;PRODUCT_HIERARCHY;R18;56 Zoll, Lenze
DEBUG DataEventListener.java:123 - Added:Development;PRODUCT_HIERARCHY;R18;20 Zoll, allgemein
In this case, i added the records "32 Zoll, B&R" and then "20 Zoll, allgemein". As you can see in both cases two events are fired and the first event seems to come with wrong data. The reported id for the newly created record is R17. For the logging, i did lookup the entry in the hierarchy table by id and use the displayvalue of the record. But the first event always shows the displayvalue from some already existing entry.
How can i avoid duplicate events or if this is not possible, how i can recognize that the display value of the first event is not valid.

I have not tetsted it yet, because I'm waiting for my server to be updated, but SAP told me that the API version 5.5.42.67 should fix the problem.
Thanks for your post.

ADF Rich Client Faces af:table editingMode="clickToEdit" event handling

I have a table with editingMode="clickToEdit" that contains columns with inputText with values that map to Eclipselink JPA Entity bean properties.
I am struggling to find an event that I can monitor that would allow me to persist or cancel the changes the user enters. I might add "Commit" and "Cancel" commands in their own columns but then I would like to have an event that allow me to enable and disable those commandButtons. In any event I would like to capture the fact that a row has entered editing mode with either a clientListener or a servletListener.
Is any of this possible?
Frank's suggestion in Re: Edit Specific Row on click of button in ADF table implies that the table be re-rendered and I would specifically like to avoid that as it is disturbing to the user to have the entire table redrawn, particularly when the size of the table exceeds the displayed rows.
Thanks, Mark.

I suppose I didn't ask my question properly. I have been persisting POJO and JPA beans with ADF Faces, Trinidad and ADF Faces Rich Client since 2004 and I have a hundred thousand lines of library code to manage that.
The tricky thing about <af:tables (and <tr:tables for that matter) is that it is challenging to render individual rows or cells and re-rendering the entire table is disruptive to the user experience. My normal practice is to allow the user to select a row and then click an edit button that re-renders an edit panel (or detail stamp) which contains a submit button. However, for small simple tables this is overkill and in-line editing would be very attractive. The WONDERFUL thing about <af:table editingMode="clickToEdit" is that the user can enter an EDIT mode without redrawing the table.
My problem is that I have not yet discovered an event that I can monitor to let me know that the user has done this. What I think that I want is something like the clientListener selection event that would fire when the editingMode state changed: a clientListener editingMode event.
If I use the clientListener selection event, is there any way I can determine editingMode state of the row?
Here is what I have tried
      <af:table id="paymentTable" binding="#{PaymentLogTable.table}"
                rows="5" value="#{PaymentLogTable.model}" rowSelection="single" columnSelection="single"
                var="payRow" displayRow="selected" editingMode="clickToEdit"
                selectionListener="#{PaymentLogTable.selectionListener}">
        <af:clientAttribute name="keyColumn" value="payRow_amount"/>
        <af:clientListener method="MIZAR.adf.selectionHandler" type="selection"/>
        <af:clientListener method="MIZAR.adf.editingModeHandler" type="dblClick"/>
        <af:column clientComponent="true" width="50" align="center" headerText="ID" sortable="false">
          <af:outputText value="#{payRow.id}" />
        </af:column>
        <af:column width="75" align="right" headerText="Amount" sortable="false" clientComponent="true">
          <af:inputText id="payRow_amount" value="#{payRow.amount}" valueChangeListener="#{payRow.setRowDirty}" clientComponent="true">
            <af:convertNumber minFractionDigits="2" maxFractionDigits="2"/>
          </af:inputText>
        </af:column>
... more columns
MIZAR.adf.selectionHandler = function (event){
MIZAR.adf.editingModeHandler(event);
MIZAR.adf.editingModeHandler = function (event) {
var table = event.getSource();
var keys = table.getPropertyKeys();
var selectedRowKeys = table.getSelectedRowKeys();
var keyColumn = table.getProperty('keyColumn');
var aKeySet = event.getAddedSet();
for(aRowKey in aKeySet){
      var newRowKey = aRowKey;
var newRowComp = table.findComponent(keyColumn,newRowKey);
if ( newRowComp ){
    var readOnly = newRowComp.getReadOnly();
    if ( !readOnly ){
      alert ('Editable'); // NEVER GETS HERE
if (table.getProperty('isCanceled')) {
    alert ('canceled');
}But, the MIZAR.adf.editingModeHandler doesn't get called when I double click the row and neither does the MIZAR.adf.selectionHandler. The inputText component always shows up as readOnly = true.
Thanks, Mark

Question related to PO Event Handler

Hi Experts
I am facing issues related to PO Header Event Handler:
1. When I make change to Statistical Delivery Date under Delivery Schedule tab in ECC, The PO Header EH is getting deleted in EM. May I know the reason behind this? Please suggest how to avoid this.
2. When I am deleting one of PO Items, the PO Header EH is also getting deleted in EM. When I undelete the PO Item, my PO Item EH is active again but PO Header Eh is still in deleted status. Please suggest how to correct this.
I really appreciate your quick answers to this.
Regards
Ravi

Hi Steffen
When we tried to analyse through debugging, for the first issue, we found that the standard application tables PURCHASE_ORDER_HEADER_NEW and PURCHASE_ORDER_HEADER_OLD delivered by SAP for BPT ESC_PURORD, are not having the value D for DeleteVal. column. When we have put this manually for testing purpose, the issues are resolved. But we do not know the impact of putting this value here as standard SAP did not deliver it that way.
When we observed tables of other BPT, this value D is there. Please throw some light on this before we go ahead and make changes.
Thanks
Ravi

Event handling in global class (abap object)

Hello friends
I have 1 problem regarding events in abap object... how to handel an event in global class in se24 .
Regards
Reema jain.
Message was edited by:
        Reema Jain

Hello Reema
The following sample report shows how to handle event in principle (see the § marks)..
The following sample report show customer data ("Header"; KNB1) in the first ALV list and sales areas ("Detail"; KNVV) for the selected customer (event double-click) in the second ALV list.
*& Report ZUS_SDN_TWO_ALV_GRIDS
REPORT zus_sdn_two_alv_grids.
DATA:
gd_okcode        TYPE ui_func,
go_docking       TYPE REF TO cl_gui_docking_container,
go_splitter      TYPE REF TO cl_gui_splitter_container,
go_cell_top      TYPE REF TO cl_gui_container,
go_cell_bottom   TYPE REF TO cl_gui_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid,
gs_layout        TYPE lvc_s_layo.
DATA:
gt_knb1          TYPE STANDARD TABLE OF knb1,
gt_knvv          TYPE STANDARD TABLE OF knvv.
"§1. Define and implement event handler method
"     (Here: implemented as static methods of a local class)
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_knb1      TYPE knb1.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
*        IS_ROW_ID    =
*        IS_COLUMN_ID =
        is_row_no    = es_row_no.
*   Triggers PAI of the dynpro with the specified ok-code
    CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD.                    "handle_double_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = '1000'.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
    EXPORTING
      parent            = go_docking
      rows              = 2
      columns           = 1
*      NO_AUTODEF_PROGID_DYNNR =
*      NAME              =
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = go_cell_top.
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 2
      column    = 1
    RECEIVING
      container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_cell_top
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
"§2. Set event handler (after creating the ALV instance)
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1. " Or:
" SET HANDLER: lcl_eventhandler=>handle_double_click FOR all instances.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_cell_bottom
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNVV'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knvv " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
*   User has pushed button "Display Details"
    WHEN 'DETAIL'.
      PERFORM entry_show_details.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form ENTRY_SHOW_DETAILS
*       text
* --> p1        text
* <-- p2        text
FORM entry_show_details .
* define local data
DATA:
    ld_row      TYPE i,
    ls_knb1     TYPE knb1.
CALL METHOD go_grid1->get_current_cell
    IMPORTING
      e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT        * FROM knvv INTO TABLE gt_knvv
         WHERE kunnr = ls_knb1-kunnr.
ENDFORM.                    " ENTRY_SHOW_DETAILS
Regards
Uwe

LIST output and event handling in OO ALV and

Hi,
I am creating an ALV Report.
How can i Display the Grid as a List. I am abke to change the view from the first grid that is created. but i need to show it as a list output from beginning.
Also i have created a hotspot in and it works when the ALV is displayed in Grid Format but it does not work when i switch the view to list output.
Any suggestions.
Regards,
Tarun Bahal

*& Report ZFI_TRIAL_BALANCE
REPORT zfi_trial_balance LINE-SIZE 275 LINE-COUNT 3(2) NO STANDARD PAGE HEADING.
TABLES: bseg.
TYPES: BEGIN OF ty_bkpf ,
bukrs TYPE bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr TYPE bkpf-gjahr,
budat TYPE bkpf-budat,
END OF ty_bkpf.
TYPES: BEGIN OF ty_bseg ,
bukrs TYPE bseg-bukrs,
belnr TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
hkont TYPE bseg-hkont,
END OF ty_bseg.
TYPES: BEGIN OF ty_bank,
hkont TYPE bseg-hkont,
txt50 TYPE skat-txt50,
open_dmbtr_dr TYPE p,
open_dmbtr_cr TYPE p,
trans_dmbtr_dr TYPE p,
trans_dmbtr_cr TYPE p,
close_dmbtr_dr TYPE p,
close_dmbtr_cr TYPE p,
END OF ty_bank.
TYPES: BEGIN OF ty_breakup,
bukrs TYPE bseg-bukrs,
blart TYPE bkpf-blart,
belnr TYPE bseg-belnr,
budat TYPE bkpf-budat,
umskz TYPE bseg-umskz,
rebzg TYPE bseg-rebzg,
lifnr TYPE bseg-lifnr,
kunnr TYPE bseg-kunnr,
name1 TYPE lfa1-name1,
dmbtr TYPE p,
END OF ty_breakup.
INITIALIZATION.
*       CLASS handler DEFINITION
CLASS handler DEFINITION.
PUBLIC SECTION .
    METHODS:handle_hotspot_click                              "handler definition for hotspot_click
    FOR EVENT hotspot_click OF cl_gui_alv_grid
    IMPORTING e_row_id
              e_column_id
              es_row_no,
             handle_top_of_page
    FOR EVENT print_top_of_page OF cl_gui_alv_grid
    IMPORTING table_index,
            handle_subtotal_text
    FOR EVENT subtotal_text OF cl_gui_alv_grid
    IMPORTING es_subtottxt_info
              ep_subtot_line
              e_event_data.
ENDCLASS.                    "handler DEFINITION
*       CLASS handler IMPLEMENTATION
CLASS handler IMPLEMENTATION.
METHOD handle_hotspot_click.                              "handler implementation for hotspot_click
    PERFORM handle_hotspot_click USING e_row_id
                                       e_column_id
                                       es_row_no .
ENDMETHOD.                    "handle_hotspot_click
METHOD handle_top_of_page.
    PERFORM handle_print_top_of_page.
ENDMETHOD.                    "handle_hotspot_click
METHOD handle_subtotal_text.
    PERFORM handle_subtotal_text USING es_subtottxt_info
                                       ep_subtot_line
                                       e_event_data.
ENDMETHOD.                    "Subtotal_text
ENDCLASS.                    "handler IMPLEMENTATION
DATA: i_set_values TYPE TABLE OF rgsb4,
      wa_set_values LIKE LINE OF i_set_values,
      l_dmbtr TYPE dmbtr,
      l_dmbtr2 TYPE dmbtr,
      l_dmbtr3 TYPE dmbtr,
      l_dmbtr4 TYPE dmbtr,
      l_dmbtr_total TYPE dmbtr,
      l_shkzg TYPE shkzg,
      i_bkpf TYPE STANDARD TABLE OF ty_bkpf,
      i_bseg TYPE STANDARD TABLE OF ty_bseg,
      i_bank TYPE STANDARD TABLE OF ty_bank,
      i_breakup TYPE STANDARD TABLE OF ty_breakup,
      wa_bkpf LIKE LINE OF i_bkpf,
      wa_bseg LIKE LINE OF i_bseg,
      wa_bank LIKE LINE OF i_bank,
      wa_breakup LIKE LINE OF i_breakup,
      ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm,
      l_ktopl TYPE ktopl.
DATA: gr_alvgrid TYPE REF TO cl_gui_alv_grid,
      gr_alvgrid_0200 TYPE REF TO cl_gui_alv_grid,
      gr_ccontainer TYPE REF TO cl_gui_custom_container,
      gr_ccontainer_0200 TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo,
      gt_sort TYPE lvc_t_sort,
      gt_roid TYPE lvc_t_roid,
      gt_exclude TYPE ui_functions,
      g_scrstatus TYPE i,
      gs_variant TYPE disvariant,
      o_handler TYPE REF TO handler.
CONSTANTS: c_doctype(22) TYPE c VALUE 'ZINFITR01_TRIALBALANCE'.
DATA gs_stbl TYPE lvc_s_stbl.
SELECTION-SCREEN: BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: l_date FOR sy-datum.
PARAMETERS : l_bukrs TYPE bukrs,
             l_segent TYPE fb_segment.
SELECTION-SCREEN: END OF BLOCK block1.
START-OF-SELECTION.
gs_stbl-row = 'X'.
gs_stbl-col = 'X'.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
    EXPORTING
      setnr         = c_doctype
      table         = 'SKA1'
      class         = '0000'
    TABLES
      set_values    = i_set_values
    EXCEPTIONS
      set_not_found = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR i_bank.
LOOP AT i_set_values INTO wa_set_values.
    CLEAR: l_dmbtr, l_dmbtr2, l_dmbtr3, l_dmbtr4, i_bkpf, i_bseg.
    wa_bank-hkont = wa_set_values-from.
    SELECT bukrs belnr budat gjahr FROM bkpf
      INTO CORRESPONDING FIELDS OF TABLE i_bkpf
      WHERE bukrs = l_bukrs
        AND budat < l_date-low.
    LOOP AT i_bkpf INTO wa_bkpf.
      SELECT dmbtr shkzg FROM bseg INTO (l_dmbtr, l_shkzg)
        WHERE bukrs = wa_bkpf-bukrs
          AND belnr = wa_bkpf-belnr
          AND gjahr = wa_bkpf-gjahr
          AND hkont = wa_set_values-from.
        IF l_shkzg = 'S'.
          l_dmbtr2 = l_dmbtr2 + l_dmbtr.
        ELSE.
          l_dmbtr2 = l_dmbtr2 - l_dmbtr.
        ENDIF.
        CLEAR: l_dmbtr, l_shkzg.
      ENDSELECT.
    ENDLOOP.
    IF l_dmbtr2 > 0.
      wa_bank-open_dmbtr_dr = l_dmbtr2.
    ELSE.
      wa_bank-open_dmbtr_cr = l_dmbtr2.
    ENDIF.
    CLEAR: l_dmbtr, i_bkpf, i_bseg.
    SELECT bukrs belnr budat gjahr FROM bkpf
      INTO CORRESPONDING FIELDS OF TABLE i_bkpf
      WHERE bukrs = l_bukrs
        AND budat IN l_date.
    LOOP AT i_bkpf INTO wa_bkpf.
      SELECT dmbtr shkzg FROM bseg INTO (l_dmbtr, l_shkzg)
        WHERE bukrs = wa_bkpf-bukrs
          AND belnr = wa_bkpf-belnr
          AND gjahr = wa_bkpf-gjahr
          AND hkont = wa_set_values-from.
        IF l_shkzg = 'S'.
          l_dmbtr3 = l_dmbtr3 + l_dmbtr.
        ELSE.
          l_dmbtr4 = l_dmbtr4 - l_dmbtr.
        ENDIF.
        CLEAR: l_dmbtr, l_shkzg.
      ENDSELECT.
    ENDLOOP.
*    IF l_dmbtr3 > 0.
    wa_bank-trans_dmbtr_dr = l_dmbtr3.
*    ELSE.
    wa_bank-trans_dmbtr_cr = l_dmbtr4.
*    ENDIF.
    l_dmbtr = l_dmbtr2 + l_dmbtr3 + l_dmbtr4.
    IF l_dmbtr > 0.
      wa_bank-close_dmbtr_dr = l_dmbtr.
    ELSE.
      wa_bank-close_dmbtr_cr = l_dmbtr.
    ENDIF.
    CLEAR: l_dmbtr.
    SELECT SINGLE ktopl FROM t001 INTO l_ktopl WHERE bukrs = l_bukrs.
    SELECT SINGLE txt50 FROM skat INTO wa_bank-txt50
      WHERE spras = sy-langu "( SELECT spras FROM t002 WHERE laiso = sy-langu )
      AND ktopl = l_ktopl
      AND saknr = wa_set_values-from.
    APPEND wa_bank TO i_bank.
    CLEAR wa_bank.
ENDLOOP.
LOOP AT i_bank INTO wa_bank.
*    IF wa_bank-open_dmbtr_cr < 0.
    wa_bank-open_dmbtr_cr = wa_bank-open_dmbtr_cr * -1.
*    ENDIF.
*    IF wa_bank-trans_dmbtr_cr < 0.
    wa_bank-trans_dmbtr_cr = wa_bank-trans_dmbtr_cr * -1.
*    ENDIF.
*    IF wa_bank-close_dmbtr_cr < 0.
    wa_bank-close_dmbtr_cr = wa_bank-close_dmbtr_cr * -1.
*    ENDIF.
    MODIFY i_bank FROM wa_bank.
ENDLOOP.
SORT i_bank ASCENDING BY hkont.
END-OF-SELECTION.
* SET SCREEN 100.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'TITLE1'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module save_ok INPUT
*       text
MODULE save_ok INPUT.
save_ok = ok_code.
CLEAR ok_code.
ENDMODULE.                 " save_ok INPUT
*&      Module create_alv OUTPUT
*       text
MODULE create_alv OUTPUT.
IF gr_alvgrid IS INITIAL.
    CREATE OBJECT gr_ccontainer
      EXPORTING
*    PARENT                      =
        container_name              = 'CUSTOM_CONTAINER'
        repid                       = sy-repid
        dynnr                       = '0100'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT gr_alvgrid
      EXPORTING
        i_parent          = gr_ccontainer
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    PERFORM prepare_field_catalog CHANGING gt_fieldcat .
    PERFORM prepare_layout CHANGING gs_layout .
    PERFORM prepare_sort CHANGING gt_sort.
    gs_variant-report = sy-repid.
    gs_variant-variant = 'ABC'.
    gs_variant-handle = '1'.
*    IF sy-dynnr = '0100'.
    CALL METHOD gr_alvgrid->set_table_for_first_display
      EXPORTING
*      I_BUFFER_ACTIVE               =
*      I_BYPASSING_BUFFER            =
*      I_CONSISTENCY_CHECK           =
*      I_STRUCTURE_NAME              =
*      is_variant                    = gs_variant
*      i_save                        = 'A'
*      i_default                     = 'X'
        is_layout                     = gs_layout
*      IS_PRINT                      =
*      IT_SPECIAL_GROUPS             =
*      IT_TOOLBAR_EXCLUDING          =
*      IT_HYPERLINK                  =
*      IT_ALV_GRAPHICS               =
*      IT_EXCEPT_QINFO               =
*      IR_SALV_ADAPTER               =
      CHANGING
        it_outtab                     = i_bank
        it_fieldcatalog               = gt_fieldcat
*    it_sort                       = gt_sort
*      IT_FILTER                     =
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4
    IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
    CALL METHOD gr_alvgrid->refresh_table_display
      EXPORTING
        is_stable      = gs_stbl
*        i_soft_refresh = 'X'
      EXCEPTIONS
        finished       = 1
        OTHERS         = 2.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
CREATE OBJECT o_handler.
SET HANDLER o_handler->handle_hotspot_click FOR gr_alvgrid.
SET HANDLER o_handler->handle_top_of_page FOR gr_alvgrid.
SET HANDLER o_handler->handle_subtotal_text FOR gr_alvgrid.
* ENDIF.
ENDMODULE.                 " create_alv OUTPUT
*&      Form prepare_field_catalog
*       text
*      <--P_GT_FIELDCAT text
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA: ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
CLEAR gt_fieldcat.
* IF sy-dynnr = '0100'.
ls_fcat-fieldname = 'HKONT' .
ls_fcat-ref_field = 'HKONT'.
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '15' .
ls_fcat-ref_table = 'BSEG' .
ls_fcat-coltext = 'G/L Account' .
ls_fcat-seltext = 'G/L Account' .
ls_fcat-hotspot = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'TXT50' .
ls_fcat-ref_field = 'TXT50'.
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'SKAT' .
ls_fcat-coltext = 'Description' .
ls_fcat-seltext = 'Description' .
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'OPEN_DMBTR_DR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Opening Balance: Debit' .
ls_fcat-seltext = 'Opening Balance: Debit'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'OPEN_DMBTR_CR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Opening Balance: Credit' .
ls_fcat-seltext = 'Opening Balance: Credit'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'TRANS_DMBTR_DR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Trans Balance: Debit' .
ls_fcat-seltext = 'Trans Balance: Debit'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'TRANS_DMBTR_CR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Trans Balance: Credit' .
ls_fcat-seltext = 'Trans Balance: Credit'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'CLOSE_DMBTR_DR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Closing Balance: Debit' .
ls_fcat-seltext = 'Closing Balance: Debit'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'CLOSE_DMBTR_CR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '20' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Closing Balance: Credit' .
ls_fcat-seltext = 'Closing Balance: Credit'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
* ELSE.
* ENDIF.
ENDFORM.                    " prepare_field_catalog
*&      Form prepare_layout
*       text
*      <--P_GS_LAYOUT text
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
DATA l_title(50) TYPE c.
CONCATENATE 'Trial Balance: ' l_date-low+6(2) '-' l_date-low+4(2) '-'l_date-low(4) ' to ' l_date-high+6(2) '-' l_date-high+4(2) '-'l_date-high(4) INTO l_title RESPECTING BLANKS.
* ps_layout-zebra = 'X' .
ps_layout-grid_title = l_title.
ps_layout-cwidth_opt = 'X' .
ps_layout-sel_mode = 'A'.
* ps_layout-no_toolbar = 'X'.
ps_layout-no_headers = 'X'.
ps_layout-frontend = 'L'.
ENDFORM.                    " prepare_layout
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE save_ok.
    WHEN 'BACK'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form prepare_sort
*       text
*      <--P_GT_SORT text
FORM prepare_sort CHANGING pt_sort TYPE lvc_t_sort.
CLEAR: pt_sort, gt_sort.
DATA ls_sort TYPE lvc_s_sort .
IF sy-dynnr = '0100'.
    ls_sort-spos = '1' .
    ls_sort-fieldname = 'HKONT' .
    ls_sort-up = 'X' . "A to Z
    ls_sort-down = space .
    APPEND ls_sort TO pt_sort .
ELSE.
    ls_sort-spos = '1' .
    ls_sort-fieldname = 'BELNR' .
    ls_sort-up = 'X' . "A to Z
    ls_sort-down = space .
    APPEND ls_sort TO pt_sort .
*    ls_sort-spos = '2' .
*    ls_sort-fieldname = 'BELNR' .
**    ls_sort-up = 'X' . "A to Z
**    ls_sort-down = space .
*    ls_sort-subtot = 'X'.
*    APPEND ls_sort TO pt_sort .
ENDIF.
ENDFORM.                    " prepare_sort
*&      Form handle_hotspot_click
*       text
*      -->P_E_ROW_ID text
*      -->P_E_COLUMN_ID text
*      -->P_ES_ROW_NO text
FORM handle_hotspot_click USING i_row_id TYPE lvc_s_row
                                 i_column_id TYPE lvc_s_col
                                 is_row_no TYPE lvc_s_roid.
CLEAR: wa_bank, i_breakup.
READ TABLE i_bank INTO wa_bank INDEX is_row_no-row_id.
*TYPES: BEGIN OF ty_breakup,
* bukrs TYPE bseg-bukrs,
* blart TYPE bkpf-blart,
* belnr TYPE bseg-belnr,
* budat TYPE bkpf-budat,
* umskz TYPE bseg-umskz,
* rebzg TYPE bseg-rebzg,
* lifnr TYPE bseg-lifnr,
* name1 TYPE lfa1-name1,
* dmbtr TYPE p,
* END OF ty_breakup.
SELECT bukrs belnr budat gjahr FROM bkpf
        INTO CORRESPONDING FIELDS OF TABLE i_bkpf
        WHERE bukrs = l_bukrs
          AND budat IN l_date.
LOOP AT i_bkpf INTO wa_bkpf.
    SELECT bukrs belnr umskz rebzg lifnr kunnr dmbtr shkzg FROM bseg
      INTO (wa_breakup-bukrs, wa_breakup-belnr, wa_breakup-umskz, wa_breakup-rebzg, wa_breakup-lifnr, wa_breakup-kunnr, wa_breakup-dmbtr, l_shkzg)
      WHERE bukrs = l_bukrs
              AND belnr = wa_bkpf-belnr
              AND gjahr = wa_bkpf-gjahr
              AND hkont = wa_bank-hkont.
      SELECT SINGLE blart budat FROM bkpf INTO (wa_breakup-blart, wa_breakup-budat)
        WHERE bukrs = l_bukrs
              AND belnr = wa_bkpf-belnr
              AND gjahr = wa_bkpf-gjahr.
      IF wa_breakup-lifnr IS NOT INITIAL.
        SELECT SINGLE name1 FROM lfa1 INTO wa_breakup-name1
          WHERE lifnr = wa_breakup-lifnr.
      ELSE.
        SELECT SINGLE name1 FROM kna1 INTO wa_breakup-name1
        WHERE lifnr = wa_breakup-kunnr.
        wa_breakup-lifnr = wa_breakup-kunnr.
      ENDIF.
    ENDSELECT.
    IF l_shkzg = 'H'.
      wa_breakup-dmbtr = wa_breakup-dmbtr * -1.
    ENDIF.
    IF wa_breakup IS NOT INITIAL.
      APPEND wa_breakup TO i_breakup.
    ENDIF.
    CLEAR wa_breakup.
ENDLOOP.
SET SCREEN 200.
LEAVE SCREEN.
ENDFORM.                    " handle_hotspot_click
*&      Module STATUS_0200 OUTPUT
*       text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'TITLE2'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
*       text
MODULE user_command_0200 INPUT.
CASE save_ok.
    WHEN 'BACK'.
*      CLEAR: gr_alvgrid, gr_ccontainer.
      SET SCREEN 100.
      LEAVE SCREEN .
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module create_alv_0200 OUTPUT
*       text
MODULE create_alv_0200 OUTPUT.
IF gr_alvgrid_0200 IS INITIAL.
    CREATE OBJECT gr_ccontainer_0200
          EXPORTING
*    PARENT                      =
            container_name              = 'CUSTOM_CONTAINER'
            repid                       = sy-repid
            dynnr                       = '0200'
          EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5
            OTHERS                      = 6.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT gr_alvgrid_0200
      EXPORTING
        i_parent          = gr_ccontainer_0200
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    PERFORM prepare_field_catalog_0200 CHANGING gt_fieldcat .
* PERFORM prepare_layout CHANGING gs_layout .
    PERFORM prepare_sort CHANGING gt_sort.
    CALL METHOD gr_alvgrid_0200->set_table_for_first_display
      EXPORTING
*      I_BUFFER_ACTIVE               =
*      I_BYPASSING_BUFFER            =
*      I_CONSISTENCY_CHECK           =
*      I_STRUCTURE_NAME              =
*      IS_VARIANT                    =
*      I_SAVE                        =
*      I_DEFAULT                     = 'X'
        is_layout                     = gs_layout
*      IS_PRINT                      =
*      IT_SPECIAL_GROUPS             =
*      IT_TOOLBAR_EXCLUDING          =
*      IT_HYPERLINK                  =
*      IT_ALV_GRAPHICS               =
*      IT_EXCEPT_QINFO               =
*      IR_SALV_ADAPTER               =
      CHANGING
        it_outtab                     = i_breakup
        it_fieldcatalog               = gt_fieldcat
      it_sort                       = gt_sort
*      IT_FILTER                     =
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4
    IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
    CALL METHOD gr_alvgrid_0200->refresh_table_display
      EXPORTING
        is_stable      = gs_stbl
*        i_soft_refresh = 'X'
      EXCEPTIONS
        finished       = 1
        OTHERS         = 2.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
* SET SCREEN 100.
ENDMODULE.                 " create_alv_0200 OUTPUT
*&      Form prepare_field_catalog_0200
*       text
*      <--P_GT_FIELDCAT text
FORM prepare_field_catalog_0200 CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA: ls_fcat TYPE lvc_s_fcat.
CLEAR: pt_fieldcat, gs_layout.
ls_fcat-fieldname = 'BUKRS' .
ls_fcat-ref_field = 'BUKRS'.
ls_fcat-inttype = 'c' .
ls_fcat-outputlen = '5' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Co' .
ls_fcat-seltext = 'Company Code'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BLART' .
ls_fcat-ref_field = 'BLART'.
ls_fcat-inttype = 'c' .
ls_fcat-outputlen = '5' .
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'Doc Typ' .
ls_fcat-seltext = 'Document Type'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BELNR' .
ls_fcat-ref_field = 'BELNR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '12' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Doc Num' .
ls_fcat-seltext = 'Document Number'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUDAT' .
ls_fcat-ref_field = 'BUDAT'.
ls_fcat-inttype = 'DATS' .
ls_fcat-outputlen = '13' .
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'G/L Date' .
ls_fcat-seltext = 'G/L Posting Date'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'UMSKZ' .
ls_fcat-ref_field = 'UMSKZ'.
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'G/L Indicator' .
ls_fcat-seltext = 'Special G/L Indicator'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'REBZG' .
ls_fcat-ref_field = 'REBZG'.
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '13' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Reference' .
ls_fcat-seltext = 'Invoice Number'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'LIFNR' .
ls_fcat-ref_field = 'LIFNR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '13' .
ls_fcat-ref_table = 'LFA1'.
ls_fcat-coltext = 'Vendor/Customer' .
ls_fcat-seltext = 'Vendor/Customer Number'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'NAME1' .
ls_fcat-ref_field = 'NAME1'.
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '50' .
ls_fcat-ref_table = 'LFA1'.
ls_fcat-coltext = 'Description' .
ls_fcat-seltext = 'Description'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'DMBTR' .
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-inttype = 'NUMC' .
ls_fcat-outputlen = '25' .
ls_fcat-ref_table = 'BSEG'.
ls_fcat-coltext = 'Amount' .
ls_fcat-seltext = 'Amount'.
ls_fcat-no_sign = 'X'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM.                    " prepare_field_catalog_0200
*&      Form handle_print_top_of_page
*       text
* --> p1        text
* <-- p2        text
FORM handle_print_top_of_page .
WRITE: sy-uline.
WRITE: /(255)'Tecnimont ICB' CENTERED.
WRITE: /(255)'Trial Balance' CENTERED.
WRITE: 'Trial Balance for ', l_bukrs, ': From Period - ', l_date-low, 'To Period - ', l_date-high. "LEFT-JUSTIFIED .
WRITE: /.
WRITE: / sy-uline.
FORMAT COLOR 1.
WRITE: sy-vline, AT 2(59)'Account Code and Name'CENTERED, AT 60 sy-vline, AT 61(45) 'Opening Balance' CENTERED, AT 107 sy-vline, AT 108(41) 'Transactions' CENTERED , AT 150 sy-vline, AT 155(41) 'Closing Balance' CENTERED, AT 197 sy-vline.
FORMAT COLOR 4.
WRITE: sy-vline,'GL Account'LEFT-JUSTIFIED, AT 16(50)'Description'CENTERED, AT 60 sy-vline, AT 61(23) 'Debits'CENTERED, AT 85(23) 'Credits.'CENTERED, AT 107 sy-vline, AT 108(23) 'Debits'CENTERED, AT 128(23)'Credits'CENTERED, AT 150 sy-vline, AT 151(23)
'Debits'CENTERED, AT 174(23) 'Credits'CENTERED, AT 197 sy-vline.
FORMAT COLOR OFF.
* WRITE: sy-uline.
ENDFORM.                    " handle_print_top_of_page
*&      Form handle_subtotal_text
*       text
* --> p1        text
* <-- p2        text
FORM handle_subtotal_text USING es_subtottxt_info TYPE lvc_s_stxt
                               ep_subtot_line TYPE REF TO data
                               e_event_data TYPE REF TO
                               cl_alv_event_data.
DATA l_bank LIKE wa_bank.
FIELD-SYMBOLS: <fs1> STRUCTURE wa_bank DEFAULT l_bank,
               <fs2>.
IF es_subtottxt_info-criteria = 'TXT50'.
    ASSIGN ep_subtot_line->* TO <fs1>.
    ASSIGN e_event_data->m_data->* TO <fs2>.
    CONCATENATE es_subtottxt_info-keyword 'Grand Summary: '
                 INTO <fs2>.
ENDIF.
ENDFORM.                    " handle_subtotal_text
This is the Code............... this code creates a Grid and not list and hotspot event wors on grid and not on list.
Regards,
Tarun Bahal

Javascript event handling

The following code is being executed three times in the
following sequence:
1) On initialization of my Flex application, initCallback()
is called
2) When I broadcast a 'getUserPreferencesFromCookie' event,
handleGetUserPreferenceCookie() is called.
3) When I broadcast a 'writeUserPreferencesCookie' event,
handleWriteUserPreferenceCookie() is called.
// Callback when flash is initialized
var initCallback = function()
// Add all event listeners
FABridge.flash.root().getPreferences().addEventListener(
"getUserPreferencesFromCookie",
handleGetUserPreferenceCookie);
FABridge.flash.root().getPreferences().addEventListener(
"writeUserPreferencesCookie",
handleWriteUserPreferenceCookie);
FABridge.flash.root().getPreferences().faBridgeInitialized();
// Listen for flash initialization (i.e. the Main application
is created)
FABridge.addInitializationCallback("flash", initCallback);
// Event handler for Get User Preferences Cookie Events
events
var handleGetUserPreferenceCookie = function(readEvent)
alert("Getting Cookie for user: " +
readEvent.getUsername());
if (readEvent.getUsername())
var theCookie = readCookie(readEvent.getUsername());
alert("Returned from readCookie: '" + theCookie + "'");
var preference = FABridge.flash.root().getPreferences();
if (preference)
if (preference.setPreferenceCookie)
preference.setPreferenceCookie(theCookie);
else
FABridge.flash.root().getPreferences().setPreferenceCookie(null);
// Event handler for Write User Preferences Cookie Events
events
var handleWriteUserPreferenceCookie = function(writeEvent)
alert("Creating Cookie for User");
if (writeEvent)
alert("Write event is defined");
var username = writeEvent.getUsername();
if (username)
// Create a cookie given the username and the XML
createCookie(writeEvent.getUsername(),
writeEvent.getData());
alert("Returned from creating cookie");
else
alert("Write event is undefined");
alert("Write cookie method completed");
Here is the problem:
handleGetUserPreferences() completes as expected (i.e. the
cookie string is set into my preferences object). The readEvent is
a custom event that extends flash.events.Event. However, when
writeUserPreferenceCookie is called, the line
writeEvent.getUsername() fails. writeEvent is the same type of
event as readEvent. And when I say 'fails' I mean that the method
goes no further. I never see the 'Write cookie method completed'
alert. There are no errors in the Javascript Error Console.
I've checked the writeEvent on the action script side. The
username has been set into the event the same way that it was set
into the readEvent. I cannot see why I can get data out of the
readEvent but not the writeEvent.
ANY help would be much appreciated.
-Julie

Just because the forums are a little slow on a weekend...
JavaScript functions should be declared in the HEAD of an HTML page. I wasn't aware that a function declared in the BODY writes to a new document, so I've also learned something out of this.
Take this and work on it to place the output where you want it:<html><head><script type="text/javascript"></script></head>
<body>
<table>
    <tr>
      <td><font size = "" color="purple">Age:</font></td>
      <td><input type = "text" name = "age" size = "10" maxlength = "3"></td>
    </tr>
    <tr>
      <td><font size = "" color = "purple">Select the best reason
        <br>to use the Library:</font></td>
      <td><input type = "radio" name = "purpose" value = "school" onClick = "clickfunction()">
        <font size = "" color = "purple" >School / College</font><br>
          <input type = "radio" name = "purpose" value="work">
            <font size = "" color = "purple">Work</font><br>
          <input type = "radio" name="purpose" value="personal">
            <font size = "" color = "purple">Personal</font>
      </td>
      
      <td id="stuffHere"></td>
    </tr>
</table><br>
<form>
    <input type="Submit" name="register" value="Register" align="MIDDLE">
    <input type="reset" name="clear" value="Clear Form" align="MIDDLE">
</form>
</body></html>db
-- next time, no JavaScript questions, please!
edit What you wanted to do was<div id="div1" style = 'display:none;'>and in the functiondocument.getElementById("div1").style.display = "block";Edited by: Darryl.Burke

Copying text to the clipboard in AVDocDidOpen event handler causes Acrobat 9 to crash

I'm trying to copy the filename of a document to the clipboard in a plugin with my AVDocDidOpen event handler. It works for the first file opened; however when a second file is opened, Acrobat crashes. The description in the application event log is: "Faulting application acrobat.exe, version 9.1.0.163, faulting module gdi32.dll, version 5.1.2600.5698, fault address 0x000074cc."
I've confirmed that the specific WIN32 function that causes this to happen is SetClipboardData(CF_TEXT, hText); When that line is commented out and remaining code is left unchanged, Adobe doesn't crash.
Is there an SDK function that I should be using instead of WIN32's SetClipboardData()? Alternately, are there other SDK functions that I need to call be before or after I call SetClipboardData()
Bill Erickson

Leonard,
I tried it with both "DURING, HANDLER, END_HANDLER" and "try catch," as shown below. However, it doesn't crash in the event handler; it crashes later, so the HANDLER/catch block is never hit.
The string that's passed to SetClipboardData() is good, because I'm able to paste it into the filename text box of the print dialog when I try to create the "connector line" PDF. I also got rid of all the string manipulation and tried to pass a zero-length string to the clipboard but it still crashes.
Here's the code:
ACCB1 void ACCB2 CFkDisposition::myAVDocDidOpenCallback(AVDoc doc, Int32 error, void *clientData)
    PDDoc pdDoc = AVDocGetPDDoc(doc);
    char* pURL = ASFileGetURL(PDDocGetFile(annotDataRec->thePDDoc));
    if (pURL)    {
        if (strstr(pURL, "file://") && strstr(pURL, "Reviewed.pdf")) {
            // Opened from file system so copy filename to clipboard for connector line report
            char myURL[1000];
            strcpy(myURL, pURL);
            ASfree(pURL);    // Do this before we allocate a Windows handle just in case Windows messes with this pointer
            pURL = NULL;
            HGLOBAL hText = GlobalAlloc(GMEM_MOVEABLE, 1000);
            if (hText)    {
                try
                    // Skip path info and go right to filename
                    char *pText = (char *)GlobalLock(hText);
                    char *pWork = strrchr(myURL,'/');
                    if (pWork)    {
                        strcpy(pText, pWork+1);
                    } else {
                        strcpy(pText, myURL);
                    char *pEnd = pText + strlen(pText);    // Get null terminator address
                    // Replace "%20" in filename with " "
                    pWork = strstr(pText, "%20");
                    while (pWork)    {
                        *pWork = ' ';
                        memmove(pWork+1, pWork+3, (pEnd - (pWork+2)));
                        pWork = strstr(pText, "%20");
                    // Append a new file extension
                    pWork = strstr(pText, ".pdf");
                    *pWork = 0;    // truncate the string before ".pdf"
                    strcat(pWork,".Connectors.pdf");
                    GlobalUnlock(hText);     // Must do this BEFORE SetClipboardData()
                    // Write it to the clipboard
                    OpenClipboard(NULL);
                    EmptyClipboard();
                    SetClipboardData(CF_TEXT, hText);     // Here's the culprit
                    CloseClipboard();
                    GlobalFree(hText);
                } catch (char * str) {
                    AVAlertNote(str);
        if (pURL)
            ASfree(pURL);

Input value given on web page is not getting pickedup in event handler

Hi friends,
I have created one simple page in SE80 with program with flow logic option, in which I would like to show business partner details from BUT000 table with the input of partner number. But the thing is the input value(partner no.)which I am giving on web page is not getting picked up in selection in event handler though I am giving input value it is becoming initial while selecting. What could be the reason?
Below I am mentioning the code which I have written in even handler for OnInputProcessing event.
CASE EVENT_ID.
WHEN 'select'.
NAVIGATION->SET_PARAMETER( 'partner' ).
SELECT * FROM but000 INTO TABLE I_but000 WHERE partner BETWEEN partner AND partner1.
WHEN OTHERS.
ENDCASE.
Thanks in advance,
Steve

Hi Abhinav,
I tried with the one you posted. But it is giving run time error as shown below.
Note
The following error text was processed in the system CRD : Access via 'NULL' object reference not possible.
The error occurred on the application server crmdev_CRD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ONINPUTPROCESSING of program CLO24DDFJW575HVAQVJ89KWHEHC9OCP
Method: %_ONINPUTPROCESSING of program CL_O24DDFJW575HVAQVJ89KWHEHC9OCP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Regards,
Steve

How do I create an Event Handler for an Execute SQL Task in SSIS if its result set is empty

So the precedence on my entire package executing is based on my first SELECT of my Table and an updatable column. If that SELECT results in an empty result set, how do I create an Event Handler to handle an empty result set?
A Newbie to SSIS.
I appreciate your review and am hopeful for a reply.
PSULionRP

Depends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/

Swing: when trying to get the values from a JTable inside an event handler

Hi,
I am trying to write a graphical interface to compute the Gauss Elimination procedure for solving linear systems. The class for computing the output of a linear system already works fine on console mode, but I am fighting a little bit to make it work with Swing.
I put two buttons (plus labels) and a JTextField . The buttons have the following role:
One of them gets the value from the JTextField and it will be used to the system dimension. The other should compute the solution. I also added a JTable so that the user can type the values in the screen.
So whenever the user hits the button Dimensiona the program should retrieve the values from the table cells and pass them to a 2D Array. However, the program throws a NullPointerException when I try to
do it. I have put the code for copying this Matrix inside a method and I call it from the inner class event handler.
I would thank you very much for the help.
Daniel V. Gomes
here goes the code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import AdvanceMath.*;
public class MathF2 extends JFrame {
private JTextField ArrayOfFields[];
private JTextField DimOfSis;
private JButton Calcular;
private JButton Ativar;
private JLabel label1;
private JLabel label2;
private Container container;
private int value;
private JTable DataTable;
private double[][] A;
private double[] B;
private boolean dimensionado = false;
private boolean podecalc = false;
public MathF2 (){
super("Math Calcs");
Container container = getContentPane();
container.setLayout( new FlowLayout(FlowLayout.CENTER) );
Calcular = new JButton("Resolver");
Calcular.setEnabled(false);
Ativar = new JButton("Dimensionar");
label1 = new JLabel("Clique no bot�o para resolver o sistema.");
label2 = new JLabel("Qual a ordem do sistema?");
DimOfSis = new JTextField(4);
DimOfSis.setText("0");
JTable DataTable = new JTable(10,10);
container.add(label2);
container.add(DimOfSis);
container.add(Ativar);
container.add(label1);
container.add(Calcular);
container.add(DataTable);
for ( int i = 0; i < 10 ; i ++ ){
for ( int j = 0 ; j < 10 ; j++) {
DataTable.setValueAt("0",i,j);
myHandler handler = new myHandler();
Calcular.addActionListener(handler);
Ativar.addActionListener(handler);
setSize( 500 , 500 );
setVisible( true );
public static void main ( String args[] ){
MathF2 application = new MathF2();
application.addWindowListener(
new WindowAdapter(){
public void windowClosing (WindowEvent event)
System.exit( 0 );
private class myHandler implements ActionListener {
public void actionPerformed ( ActionEvent event ){
if ( event.getSource()== Calcular ) {
if ( event.getSource()== Ativar ) {
//dimensiona a Matriz A
if (dimensionado == false) {
if (DimOfSis.getText()=="0") {
value = 2;
} else {
value = Integer.parseInt(DimOfSis.getText());
dimensionado = true;
Ativar.setEnabled(false);
System.out.println(value);
} else {
Ativar.setEnabled(false);
Calcular.setEnabled(true);
podecalc = true;
try {
InitValores( DataTable, value );
} catch (Exception e) {
System.out.println("Erro ao criar matriz" + e );
private class myHandler2 implements ItemListener {
public void itemStateChanged( ItemEvent event ){
private void InitValores( JTable table, int n ) {
A = new double[n][n];
B = new double[n];
javax.swing.table.TableModel model = table.getModel();
for ( int i = 0 ; i < n ; i++ ){
for (int j = 0 ; j < n ; j++ ){
Object temp1 = model.getValueAt(i,j);
String temp2 = String.valueOf(temp1);
A[i][j] = Double.parseDouble(temp2);

What I did is set up a :
// This code will setup a listener for the table to handle a selection
players.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
ListSelectionModel rowSM = players.getSelectionModel();
rowSM.addListSelectionListener(new Delete_Player_row_Selection(this));
//Class will take the event and call a method inside the Delete_Player object.
class Delete_Player_row_Selection
implements javax.swing.event.ListSelectionListener
Delete_Player adaptee;
Delete_Player_row_Selection (Delete_Player temp)
adaptee = temp;
public void valueChanged (ListSelectionEvent listSelectionEvent)
adaptee.row_Selection(listSelectionEvent);
in the row_Selection function
if(ex.getValueIsAdjusting()) //To remove double selection
return;
ListSelectionModel lsm = (ListSelectionModel) ex.getSource();
if(lsm.isSelectionEmpty())
System.out.println("EMtpy");
else
int selected_row = lsm.getMinSelectionIndex();
ResultSetTableModel model = (ResultSetTableModel) players.getModel();
String name = (String) model.getValueAt(selected_row, 1);
Integer id = (Integer) model.getValueAt(selected_row, 3);
This is how I got info out of a table when the user selected it

How to handle multiple database tables in a single UIX page?

Hi,
I am new to UIX & BC4J. I have to handle data from four different tables in the database. The scenario is as follows:
The tables are
1. user
fields are: userid number, name varchar2
2. business
fields are: businessId number, name varchar2
3. service
fields are: serviceId number, serviceName varchar2
4. userBusiness
userid,businessid (both are foreign keys) & form complex primary keys.
and userid,businessid, serviceId are primary keys.
Now my problem is: to create a webpage where
1. The userid is available in the httpSession Variable as string.
2. according to the userId stored in the session variable I have to retrieve the business names and show them in a choice i.e., pull down box.
3. I have to show the services provided by the business for the business name selected in the combo box.
Could anyone Please help me solve this problem? Could you please give me hints? I have truncated the other fields in the tables.
Thanking you,
Velpandian .S

At the moment, you can't do it declaratively. You have to do it in an event handler. Assuming you have the userid setup as a query parameter in the view object, something like this should get you started:
public EventResult handleEvent(
BajaContext context, Page page, PageEvent event) throws Throwable
HttpSession session = context.getServletRequest().getSession(true);
ViewObject view = ServletBindingUtils.getViewObject(context);
String userid = session.getAttribute("userid");
view.setWhereClauseParam(0, userid);
view.executeQuery();

Event Handler Header Extension Table

Similar Messages

Maybe you are looking for