Ever since I installed the 3.6.6 version, I've experienced frequent "hanging" problem which never or hardly occured before. And it has become quite annoying. Should I restore to the older version?
Ever since I installed Firefox 3.6.6, "hanging", which hardly happened before, has become so frequent that it is very annoying. My use habit and pattern has not changed. Should I just re-install the earlier version?
== This happened ==
A few times a week
== It's hard to tell what triggers it. I could be writing a e-mail, or moving to another web site...
Without knowing what's causing it, and therefore what options you have, I can't advise whether it's your 'best' option.
Have you investigated whether it's an add-on or a plug-in - particularly Flash? Have you tried safe-mode? Have you tried anything?
Similar Messages
-
How do I free up more VRAM. When i try to put text on an image or crop my work flashes and goes black? This only started happening after installing CC6 PS and Bridge only.
"Other" is the measure of used space on the iPod not taken up by Audio, Video & Photos. This includes the iPod's library and artwork plus any files you may have copied to your iPod in disk mode. The overhead for the library & artwork data is typically 1-2% of the size of the media, e.g. for 100Gb of Audio & Video expect to have around 1.5Gb of "Other". This information is needed for the iPod's operation and cannot be removed.
If you have significantly larger amounts of "Other", not related to files you've intentionally placed on the iPod, then these are probably disconnected copies of your media files or iPod libraries left over from failed sync operations. The only way to recover the space is to do a full restore.
If you have copies of all your media in your iTunes library this isn't a problem, but if you've been manually managing the content then you might need to try to recover the files from it first. See this post by Zevoneer on transferring files from the iPod to your computer. Some of the tools rely on the iPod having a healthy library however the manual method mentioned towards the end of the post should work regardless.
tt2 -
I live in Canada but my notebook was purchased in the US. I am trying to buy and send an iphoto book which I created, to a canadian address but the form won't accept a canadian address. What can I do?
If this is an iPhoto question (the forum you posted in) and if you have iPhoto '11 (you tell nothing about your system) then you set the print products country in the iPhoto preferences
If this is an iPhoto for IOS question then post in that forum - https://discussions.apple.com/community/app_store/iphoto_for_ios
LN -
My iPod touch 4g is so laggy ever since I installed iOS 6.0.1 its so frustrating I can't even play my favourite games, and if I can't play my favourite games, I might as well get an android phone for the sake of being fast.
This tends to hlep
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Ever since I installed Safari 5.1 on my PC (XP) I can no longer access the pdf files on my website. I have no problems with Chrome and Firefox. I keep on getting a message from WebKit2WebProcess.exe that the LogTransport2.dill was not found. (I HATE PCs...) I tried reinstalling Acrobat 9. I tried reinstalling Safari. I even tried an older version of Safari. Nothing Helped. Others have tried it on their machine, and it worked fine. But I do not know what is the matter with mine. I suspect the root cause is the missing LogTransport2.dill file. But I do not know how to go about getting it. Your help is truly appreciated. My website is http://www.hlmartworks.com.
I have also found the article that provides 3 solutions but none of the solutions worked.
-
Ever since I installed the Safari 5.1.7 update my trackpad malfunctions.
Ever since I installed the Safari 5.1.7 update, my trackpad does not functing well. I know its not a faulty trackpad because it also malfunctions when I install a different mouse. The malfunction happens when I launch the Safari application. How do I fix this? Is there a way to undo a software update?
Try rebooting into Safe Mode, this will clear some caches. I'm thinking one or more may have become corrupt. Have you done any basic troubleshooting such as removing he MTP's batteries and restarting it or restarting the computer or anything else?
Also PLEASE use the Profile Update , otherwise we cannot tell anything about your system which makes it extremely difficult to troubleshoot. -
ever since I installed Lion my internet connection comes and goes....have reported this to Apple Care who have helped me reset my connection but it is still happening...cant believe it is a fault of the ISP as my Iphone does not have this problem, nor does my PC laptop...is this a fault in the new system?
Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue! -
Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?
wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
Paul -
Ever since I installed IOS7, my Iphone 5 (10 months old) has always opened with a message that my voicemail password is incorrect. But I've never at any time put in a voicemail password, so I can't get into the site to put this right, and it didn't happen before I installed IOS7. The message goes away as soon as I cancel it, but it's very irritating. Any suggestions?
Call your carrier & have them reset your voicemail, then set things up again. Most carriers require a password for voicemail.
-
Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!
Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!
I get a message that says:"The itunes library is locked, on a locked disk, or you do not have write permission for this file."
I did do a permissions fix with the disk utility and same problem!
Any suggestions???
I think I might be demanding my money back for this Leopard!Below where you see the Read and Write permissions on that folder there is a little triangle next to the word Details. Scroll down a bit and you'll see a tab to click to Apply to Enclosed Items. If it says you have read and write on the main folder, click the Apply button to make sure that all folders inside the main folder also have both Read and Write permission.
-
Ever since I installed Snow Leopard (10.6.8) a month ago, the masking function in QuickTime 7Pro (v. 7.6.6) stopped working. Masks disappeared in old videos where I had previously and successfully added a mask, and I could not longer use QT 7Pro to add a mask to a new video. When I installed Snow Leopard I also installed QT X, but I found QT 7Pro in the Utilities folder, so it is still there but the masking function is definately not working.
Has anybody else experienced this?
Is there a remedy so I can recover my older masked videos, and make new masked videos?
Can I make masked videos in Final Cut Pro?
Thanks!Ever since I installed Snow Leopard (10.6.8) a month ago, the masking function in QuickTime 7Pro (v. 7.6.6) stopped working. Masks disappeared in old videos where I had previously and successfully added a mask, and I could not longer use QT 7Pro to add a mask to a new video. When I installed Snow Leopard I also installed QT X, but I found QT 7Pro in the Utilities folder, so it is still there but the masking function is definately not working.
Has anybody else experienced this?
Is there a remedy so I can recover my older masked videos, and make new masked videos?
Can I make masked videos in Final Cut Pro?
Thanks! -
How come, ever since I installed Mountain Lion, my computer is slower???
How come, ever since I installed Mountain Lion, my computer is slower???
First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
My iphone keeps shutting down randomly. Ever since I installed IO7
My iphone keeps shutting down randomly. 3-7 times a day. Ever since I installed IO7. How do I fix or reinstall IO6?
Hey Kaylyn07,
Thanks for the question. The following article may help in troubleshooting Kernal Panic’s for OS X:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/kb/TS4636
In most cases, kernel panics are not caused by an issue with the Mac itself. They are usually caused by software that was installed, or a problem with connected hardware.
To help avoid kernel panics, install all available software updates until Software Update reports, "Your software is up to date." OS X updates help your Mac handle the kinds of issues that can cause kernel panics, such as malformed network packets, or third party software issues. For most kernel panics, updating your software is all you have to do.
Diagnosing a recurring kernel panic can be difficult. If you need help with this process, consider bringing your Mac to a Genius at an Apple Store or an Apple Authorized Service Provider for help. If you plan to visit an Apple Retail store, you can make a reservation (available in some countries only).
Thanks,
Matt M. -
Ever Since I installed 10.5 My computer seems to be running slow
ok so i have a had leopard installed for about a week and a half or so. It seems that ever since i installed it my macbook seems to be running slower alot slower. I have 2 gb of memory in it. Does and one have any ideas about y or what i could do?
Sadly, mine has not fully recovered. It was abysmal when I first installed Leopard - it tried to do backups continuously. That went on for a week, and nothing else would run. programs would open partially and just hang, or freeze, or go stupid.
I had 1.25 Gig of RAM then, and I was ready to trade it in on an old Amiga. But I worked with it, upgraded memory to !.75 Gig, unplugged the external drive to stop the endless backups, and now - well now it runs slightly better than a bad copy of Windows 98.
This is a G4 tower, 877 MHz. duel processor. But the spinning rainbow (beach ball?) seems to be my constant companion. Often, the cursor freezes on the screen for more than a minute - very frustrating.
I have also had to turn off the energy savers, both CPU and screen. With those on, it would sometimes not wake up without a hard reboot.
I am looking forward to the next version. -
Ever since I installed Mavericks I've been unable to edit Numbers spreadsheets. Any help.
Ever since I installed Mavericks I've been unable to edit Numbers spreadsheets. Any help.
There is not enough information in your question to guess what the problem might be.
Jerry
Maybe you are looking for
-
I installed oracle 8.1.5 using the "Typical option". When I run loadjava myclass.class I get this: Error while loading com/marksaltzman/task/Task ORA-04068: existing state of packages has been discarded ORA-04067: not executed, package body "SYS.LOAD
-
I can no longer delete my yahoo mail in iOS 8
Ever since updating to iOS 8, I cannot delete the mail in my Yahoo inbox. I get a popup telling me the message can't be deleted. Settings were the same as my iPad running iOS 7, so it's got to be something with 8. Any fixes out there yet?
-
Delivery block on the line item and on schedule line
why are there two delivery block on the line item and on schedule line respectively in the sales order? which one is exactly used for blocking delivery order from creating ? thank you very much!
-
I know how to execute individual sql statements and how to execute PL/SQL procedures in JDBC, but is there a way to have a sql script executed in JDBC (other than reading the sql script file and executing the statements individually) Thanks
-
I am trying, for some time now, to implement some sort of bank application that uses DBs to store customers. I have been trying to improve my code, the results are interesting since while studing more I saw that the previous code was.....not so good.