EWA report period

Hi
I have been set-up EWA. EWAs can only be scheduled with a period of 7 days in set-up screen.
I can change period following way
SDCCN -> GO TO -> Settings -> Task specific ->
-> session Data Collection
-> Settings
-> scheduling XX days
Is this configuration a conflict?
Thanks

>
marco wrote:
>   I have been set-up EWA. EWAs can only be scheduled with a period of 7 days in set-up screen.
>
>   I can change period following way
> SDCCN -> GO TO -> Settings -> Task specific ->
> -> session Data Collection
> -> Settings
> -> scheduling XX days
Hi Marco,
I assume, that you have setup EWA via SAP Solution Manager (that means, EWA sessions are visible under Operations: Solution Monitoring -> EarlyWatch Alert).
What's the exact path and field in SDCCN config you refer to?
SDCCN -> GO TO -> Settings -> Task specific -> session Data Collection
-> Data Request -> Settings
-> Maintenance -> Settings
-> RFC Destininations -> Settings
Best regards,
Ruediger

Similar Messages

EWA Report with yellow rating and NO data

Hi,
We have upgraded the solution manager to EHP1 in June. Befor that my EWA was working perfectly fine.
Our EWA report (after upgrade) is getting generated and has a rating yellow but it contains No data.......shows data oly for hardware capacity even no other performance factors included in the report.
I checked settings in satellite system as well as in solution manager. everthing is working fine. All RFCs, service defination, word setting everthing is fine.
I need your assistance to resolve this issue o priority as its EWA for PRD isnt getting generated.
Thanks,
SAP Basis

my ewa contains:-
1.2 J2EE Configuration Data
1.2.1 Support Package Maintenance
No configuration data was found.
Recommendation:
Check whether data is displayed for this system in application 'Change Reporting', which can be found in the 'Root Cause Analysis' work center under 'System Analysis'.
The requirements for 'Change reporting' are:
- Setup of Diagnostics
- Setup wizard for this system has been executed successfully
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
2 Java Performance Data PI1
2.1 Java Application Performance
No performance data was found.
Recommendation:
Check whether data is displayed for this system in application 'Workload Analysis', which can be found in the 'Root Cause Analysis' work center under 'End To End Analysis'. If the data is not available here, open a message on component SV-SMG-DIA.
If data can be displayed in the Workload Analysis but is missing here, open a message on SV-SMG-SER.
The requirements for the 'Workload Analysis' are:
- Setup of Diagnostics including BI
- Setup wizard for this system has been executed successfully
- Agents have been set up and are running
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
please suggest

Monthly EWA Report.

Hi SolMan Mentors,
Currently we are using SolMan7.0 SPS15. I would like to know whether we can reschedule the EWA report occurrence monthly rather than weekly(default).
When I check DSWP --> Settings --> Solution Monitoring --> EarlyWatch Alert --> the period column is disabled for changes. Is there somewhere we can make changes to get EWA report monthly rather than weekly?
Thanks in advance.
Regards,
Hari

The frequency and reported time frame of the EarlyWatch Alert itself
can not be changed. In SAP Solution Manager however you have the
option to create a 'Service Level Report'.
The Service Level report uses the data from the individual EWA sessions
that have been executed for the satellite(s) and combines them into
one report.
This can be customized. You need to enter the solution -> Operations
Setup -> Solution Monitoring -> Service Level Reporting ->
Setup Service Level Reporting. Following this path you will enter the
'Set up session' where you can set your customizing via the various
checks in the check tree. Check 'Specify SL Reporting' is where you
can choose if you wish to set up a a 'standard' report or 'some other
name'. The 'standard' report has a weekly frequency.
To be able to choose a different frequency enter a self-chosen
different name to indicate a 'non-standard' report. Save.
In the next check "General Settings for SL Report Standard" in tab
'scheduling of SL report' you can
customize the frequency of this report.
Note that if you choose 'monthly', the SL Report can not be created
until the last EWA covering the last day of the previous month
has run. For example: the EWA covers the ST03 data of the calendar week
prior to the data collection. Ie data for 'Monday June 30 2008'
can at the earliest
be contained in the EWA data collection executed Monday July 07 20087.
So the SLR for June 08 can at the earliest be executed when that last
EWA data collection has been processed ( normally on Tuesday morning via
the next job SM:EXEC SERVICES. )
The checks in the session have text explaining further customizing
options. You can also find documentation in the online help and
the IMG , under 'Solution Monitoring'.

EWA Reports

Hi All,
I use SAP 4.7 enterprise x200
i have configured the EWA reports through my solution manger (kernel 700)
in the EWA report we encounter certain issues.
in System Config -> S/W Config -> SAP Kernel release (3.2.2)
i have kept all my systems in the same kernel level but it is showing the error that we are running different kernel releases.
in DB Administration -> Tables not used (10.0.5)
it shows that there are two tables that i have not used. but when i checked it data was there (but as explained it was data from DB13). so if i delete the tables what will happen to the DB13 entries. will further scheduled jobs work.
Thanks in Advance

Hi Eileen,
I have looked into this before as well, as I wanted to schedule EWA's MORE frequently as we came closer to a Go Live date. I was informed that it was not possible to change the frequency of days other than to manually create more EWA's myself.
My suggestion would be to maybe create a job/reminder for your Operations staff to push the EWA dates out 4 weeks manually after they have been created. (I know this isn't optimal).
But then at least you are seeing a report spanning a 4 week time period.
Also, I have changed the EWA day from Monday before without any conflicts. I just keep all the systems on one consistent day across the board, and my EWA for Solutions is the day after. IE: EWA's are on Tuesday, EWA for Solutions is on Wednesday.
Hope this helps.

EWA reports generating Twice

Hi,
In my solution manager EWA reporting generating twice for all systems ( 3 times for few systems) and also scheduled twice (3 times for few system ) for next week.
Request you to help me on this issue.
Thanks for you valuable help and support
Thanks & Regards
Reddy

Hello,
There should be two periodic tasks scheduled in SDCCN on managed ABAP systems.
Service Preparation and Maintenance Package Task. That is all that should be scheduled.
If you see any "refresh session" or "Earlywatch Alert for Solution Manager" sessiosn scheduled as a periodic tasks, they should be removed from the todo tab, as you can get an EWA for each one.
Most often duplicate EWA reports are caused by misconfiguration ij SDCCN on DSWP where indeed more than one EWA is being created due to the setup.
I would best guess you have incorrect SDCCN tasks scheduled as periodic tasks, when they should be driven by the Maintenance Package task as designed.
Check the periodic tasks in SDCN....typically you only should have the Service Preparation and Maintenance Package.
No other tasks should be scheduled as periodic tasks. While thre are other SDCCN tasks that get run when you deliver a service or perform certain analysis, they are not periodic tasks. I
The other exceptions is when the EWA is being processed at SAP and not on Solution Manager, then there would be an EWA tasks sheduled as a periodic task with the RFC destination SDCC_OSS (SAP)
Regards,
Paul

EWA Report collect the wrong data

Hi all
Our EWA Report can not collect data perfectly
It says that
When we checked the log files of the archive runs, we detected that your archive strategy does not follow the SAP archive recommendations.
In the time period from 28.04.2009 to 25.05.2009 , we noticed the following problems:
- There was neither a successful archive run nor a successful off-line backup on Friday 22.05.2009
- There was neither a successful archive run nor a successful off-line backup on Thursday 21.05.2009
- There was neither a successful archive run nor a successful off-line backup on Wednesday 20.05.2009
- There was neither a successful archive run nor a successful off-line backup on Tuesday 19.05.2009
- There was neither a successful archive run nor a successful off-line backup on Monday 18.05.2009
There are 5 working days without successful archive run this week.
In fact, the backup run smoothly, for that period. I think the system read the wrong period. On 5 May - 6 May 2009, backup error but from 7 May until now, backup run smoothly
FYI : On 8 Mei 2009 we restart our production system
The saposcol and sapccmsr run already
but when I hit OS07N, there is no data on casapdb system, error "Partner casapdb_CAP_32 not reached (reading table)
Can anybody help to to solve my problem?
thanks
regards,
Della

well for backups as you say.....
SAP looks for offline backups every day and since you are not doing offline backups,so it says an error during EWA report,so you must not be too much concerned on backup error in EWA report,
what wrong data is EWA collecting apart from this
Rohit

Short dump when running EWA report

Dear Expert,
I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_GUI_GP=====================CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Missing RAISING Clause in Interface
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     1
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Trigger Location of Exception
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     19
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Please advise asap since we need the report immediately.
Thank you in advance,
Rudi

Hi,
[This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
feel free to revert back.
--Ragu

Missing data in weekly EWA report

Hello SDN,
I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report.
Section 11.2 (Response Times) includes a graph showing the Top 5 transactions. The transactions are listed as Transaction 1, 2, 3, 4 and 5 on the graph and there used to be a table below the graph that showed that (e.g.) Transcation 1 was MMBE, Transaction 2 was LT27, etc..
For some reason, that table no longer appears and the graph is of no little use on its own, because I have no idea what transactions it refers to.
Has anyone else experienced this problem?
Thanks,
Arwel Owen.

Hi Ragu,
The strange thing is that this table used to be displayed up until around 6 weeks ago, when it just disappeared off the EWA report. Nothing was changed (knowingly) to cause this. Also, the graph that the table refers to is still included in the report, it's just the table that's disappeared. If anything had been changed, I would have expected both graph and table to change.
Thanks for your help.
Arwel.

Sales report period wise

Hi
Is there any report in SAP to know the customer wise Sales Organisation wise sales order peport.
we need to konw customer wise sales orders report period wise. how many salea orders we booked for the customer wise.
EX: Customer No | Customer Name| Sales document type |Total Sales order(Total of sales orders).
Plase let me know any report available for this kind of information.
Thanks
Rao

Hi..
If you have SIS Configured you can use below STD SD Reports
Standard SAP SD Reports
Reports in Sales and Distribution modules (LIS-SIS):
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Regds
MM

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

Group and drill down and roll up by the most recent SCD2 type member in reporting period in SSAS

Hello,
I am new to SSAS and cube world so my problem might not be big of a challenge for you but it is for me.
Here is my challenge :
My simplified datamart relation star schema model looks like this (2 dimensions and one fact):
DATE dimension - Date_Id, Date, Fiscal_Year, Fiscal_Quearter, Fiscal_Month, Calendar_Month, etc
CLIENT dimension – Cient_SK, Client_Id, and two SCD2 type fields : Status,and Class and, of course, Start_Date, End_Date to keep track of SCD2 along with a Current_Flag . I can have several records for the same Client_Id
over a given reporting period.
FACT – Date_ID, Client_SK, Client_Id
Fact table is daily snapshot that loads one record per client only if a client was active on that day.
Requirement:
Count number of currently active clients group by “Status” or “Class” with option to roll-up to the total count of clients
Count total number of clients who were active in the specific reporting period (period can be fiscal year or fiscal quarter or a month) grouped by the most recent “Label” or most recent “Status” or most recent “Class” in that reporting period.
I created a cube and created a measure “Distinct_Count” that does just that - distinct count on Client_Id. It works just fine for current date as well as for any given reporting period and I have nice rolling-up/down thru Fiscal_Year-Fiscal_Quarter- Month.
But I am having problem grouping by any of 3 attributes with SCD2 type in CLIENT dimension. I do not know how to get the latest active value (member) in the reporting period
Here is my CLIENT dimension:
Client_SK
Client_Id
Status
Class
Start_Date
End_Date
Current_Flag
14
78
fair
B
03/01/2008
27/09/2012
0
73
78
very good
C
28/09/2012
15/08/2013
0
89
78
Bad
B
16/08/2013
24/09/2013
0
95
78
Good
B
25/09/2013
03/10/2013
0
97
78
Good
A
04/10/2013
01/12/2013
0
102
78
Average
A
02/12/2013
31/12/2099
1
For example:
If selected reporting period is Fiscal_Quarter is Q2 that covers period Aug-Sep-Oct (Client_SK: 89, 95, 97) and if my client was active in that period, when I group active client’s count by “Status”
attribute I need to count this client in the group “Good” since that was the most recent value for this client in this period (Q2) for this attribute (Status).
I do not know if this is important but just in case: user interface could be Excel application or any MDX enabled Microsoft or third party visualisation tool.
Thanks in advance

Hello Bob,
Thank you for your question. I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Regards,
Elvis Long
TechNet Community Support

Email address in EWA reports

Hi gurus,
May be a simple question but I am new to Solution Manager and every morning we get emails from an email adress attached ewa reports. How can I change the e-mail adress
that these emails are coming from?
Thanks alot.

Tanuj,
Were you able to achieve this. The SM:EXEC SERVICES job and the SCOT job are currently run by user ID: XYZ and the the EWA
is set up by the user ID XYZ.
I changed the following:
Deleted SM:EXEC SERVICES and the SCOT job and recreated them to be run by user ID ABC (the one I want to change to).
It still uses XYZ as the sender (not ABC) because as the configuration is set up by user XYZ, it is creating SM:EXEC SERVICES
on the fly to be run by user ID XYZ.
Please let me know what I am missing. What else need to be changed ? Thanks.
Ravi

Enterprise Portal EWA Report

Hi,
I would like to know the reason why the JCO part is not included after the extraction of EWA Report on Solution Manager? What could be the reason behind this? What are the possible solutions to eliminate this type of issue? The customer actually is complaining about their Enterprise Portal EWA Report because the JCO part is not included on it. I need your expert advice on this.
Regards,

checkout the attachment of SAP Note 976054, it contains a troubleshooting section

Parameter event - to be set according to EWA report

Good day fellas,
I have a problem on my EWA report :
event 10027 trace name context forever, level 1
10028 trace name context forever, level 1
10142 trace name context forever, level 1
10183 trace name context forever, level 1
10411 trace name context forever, level 1
10629 trace name context forever, level 32
14532 trace name context forever, level 1
38068 trace name context forever, level 100
38085 trace name context forever, level 1
38087 trace name context forever, level 1
44951 trace name context forever, level 1024
10191 trace name context forever, level 1
10753 trace name context forever, level 2
10191 trace name context forever, level 1
10091 trace name context forever, level 1
and a bit below:
The following table lists events we found to be activated in your system, but which should only be activated in special circumstances. Please check whether there are special reasons to set these events. If they are no longer needed, they should be removed.
Event
10091
How can I check these special circumstances and if this parameter is needed ?
Thanks in advance,

Hi deepakkori.
The parameter is already defined in initSID.ora:
*.event='10027 trace name context forever, level 1','10028 trace name context forever, level 1','10142 trace name context forever, level 1','10183 trace name context forever, le
vel 1','10411 trace name context forever, level 1','10629 trace name context forever, level 32','14532 trace name context forever, level 1','38068 trace name context forever, le
vel 100','38085 trace name context forever, level 1','38087 trace name context forever, level 1','44951 trace name context forever, level 1024','10191 trace name context forever
, level 1','10753 trace name context forever, level 2','10191 trace name context forever, level 1','10091 trace name context forever, level 1'
and they do not recommned any SAP note. These are the only things recommended in EWA:
Parameter EVENT
To provide special functionality or control system behavior, Oracle has a number of events. These can be activated in the configuration file and/or dynamically in the server manager or sqlplus.
In general, these events and parameters should be activated on request only. When they are no longer needed, they should be removed. However, it might be necessary to activate some events during normal database operation.
The following table displays the values for the parameter "event" as
found in your system:
Parameter Current Value
event 10027 trace name context forever, level 1
10028 trace name context forever, level 1
10142 trace name context forever, level 1
10183 trace name context forever, level 1
10411 trace name context forever, level 1
10629 trace name context forever, level 32
14532 trace name context forever, level 1
38068 trace name context forever, level 100
38085 trace name context forever, level 1
38087 trace name context forever, level 1
44951 trace name context forever, level 1024
10191 trace name context forever, level 1
10753 trace name context forever, level 2
10191 trace name context forever, level 1
10091 trace name context forever, level 1
The following table lists events we found to be activated in your system, but which should only be activated in special circumstances. Please check whether there are special reasons to set these events. If they are no longer needed, they should be removed.
Event
10091
So I am not sure, how to check if I should remove this 10091 or leave it there. What is that special case that this parameter needs to be present ?
Any idea ?
thanks in advance,

EWA Report as Word Attachment to email address

hi
Currently I have html format of EWA report automatically sent to Basis Team email id .
How do I get EWA report file as MSWORD Attachment in email.
Yes. I can see that in Solman System , MSword file is generated ., But emailed only HTML version.
Hope you got my Point .

Mahesh Gangula wrote:
Thanks for all your replies .
>
> SAP Already confirms that , Thats not possible.
>
> My Client Manager Asking , why EWA comes are In-place(email body) HTML .
>
> Can we make it asd HTML Attachment as email delivery ?
Hello Mahesh
The main technical difficulty is the fact that many a email servers reject HTML content as a attachment. Plus the fact that the EWA report uses IGS services if opened as a HTML page will fail all the time since the email is not connected to the IGS server of the Solution Manager.
Hence a mail body is created instead of a attachment.
I hope that you now understand the technicality of the issue.
Regards
Amit

EWA report period

Similar Messages

Maybe you are looking for