Excel doesn't work

I have an iMac G5 running Leopard. In the dock Microsoft Word & Excel have a question mark over them, and I cannot find them in the Mac HD file. HELP !! I have papers to write.

Ok, two things.
One, please update your profile. Click My Settings on the right side of this page, fill in the information, then scroll down and click Save.
As for Microsoft Word and Excel.
Drag the ? mark off the Dock for both apps. Just drag it right up and away... it will go poof!
Now, go to MacintoshHD/Applications. Launch Microsoft Word. When you see the MW icon in the Dock, select the icon and click Keep in Dock. Do the same thing for Excel.
Carolyn

Similar Messages

Export to excel doesn't work anymore

Hello all;
I recently re-installed Excel, and the "export to excel" function in B1 doesn't work anymore. Even when I do "File> Export> MS-excel", it doesn't offer an *.xls file type to save.
Any ideas?
Thanks,
Lazar

Dear Lazo,
For export option activate On SAP B1 client machine you have go general setting > Go to path > than provide SAP sever Excel Doc Path.
and please confirm in that folder Auto open.xls file is there or not.
and than go to new excel file > Tools >Option .security > Macro setting > Select Security level Medium.
Than try to open excel file.
May it help you.
If its not work so you check on sever if its working on sever than if definitely client machine problem.
for that you have re-installed SAP client.
Regards
Mangesh Pagdhare.

PS 2010 - Export Resource Assignments to Excel Doesn't Work

I am running PS 2010 using IE 11 64-bit, Office 64-bit and Windows 7. I bring up a resource assignment grid from Resource Center for a single resource and use the out of the box Summary view. When I try to export this to Excel, Excel opens and has
a tab where the data should populate, but the data never populates. There are no error messages anywhere. This used to work.
I have tried it on a second machine running IE 10 that has 32-bit IE and Office and get the same result.
Walter

Hi Walter,
Try to add PWA URL to IE compatibility sites. Also try to run IE in compatibility mode. Finally set in the dev Tools of IE (press F12) IE8 or 9 as the default browser.
Finally try with another browser such as Chrome.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

JHS: Export to Excel doesn't work when having leading zeros

Oracle JHeadstart Release 11.1.1.2.29
We are using the Export to excel option, but when we have leading zeros it doesn't export it as text so the data is incorrect.
Can any one please tell how doe we configure JHeadstart/ADF to have the leading zeros and export it as text rather than as number.
Regards
Ram

Ram,
Export to excel is native ADF feature,not related to JHeadstart. Please post your question on the JDeveloper forum.
Steven davelaar,
JHeadstart team.

Report export to excel doesn't work correctly

I've seen this problem is quite common, and some workarounds but none is correct for me.
I have a SQL function returning report with several filters (something based on the Issues report of the Issue Tracking Application, APEX example).
In my case seems to work correctly only when I hard code the value of :P15_CANVI_DE_CLUB. I've tried Denes Kubicek solution of setting a computation before header of this item, but it does not work. Unluckily Denes package can't be used with SQL function returning report so I cannot use it to print my report.
Anyone knows how to face this flaw?
Thanks for your help.
That's the SQL function
declare
q varchar2(20000); -- query tasques
q0 varchar2(4000); -- query suport subtasques
q1 varchar2(4000); -- query subtasques
w varchar2(4000) ; -- where, condició de filtres
w1 varchar2(4000) ; -- where, condició de tasques
w2 varchar2(4000) ; -- where, condició de subtasques
w21 varchar2(4000) ; -- where subtasques
w22 varchar2(4000) ; -- where subtasques amb filtres de pantalla
begin
-- q és la consulta de tasques ("TAS_TAS_ID" is null) a aquesta
-- consulta s'ha d'unir q1 que són les subtasques
q:= 'select null as "Tasca", '||
'"GES_GES_ID", '||
 '"TAS_ID", '||
 '"TITOL", '||
 '"DESCRIPCIO", '||
 '"ASSIGNADA", '||
 '"DATAINICI", '||
 '"PREVISIO_FI", '||
 '"DATA_FINAL", '||
 '"PRIORITAT", '||
 '"SITUACIO", '||
 '"ORIGEN", '||
 '"NUMERADOR", '||
 '"ANY_NUMERADOR", '||
'"CODI_NUMERADOR", '||
'"NUMERO", '||
'"AGR_ASS_ASS_ID", '||
 '"AGR_CODI", '||
 '"TAS_TAS_ID", '||
 '"TAS_GES_GES_ID", '||
 '"GES_GES_ID_ESTA_ASSIGNADA", '||
'"GESTOR", '||
 '"PUBLICA", '||
 '"GRUP_TASQUES", '||
 '"NOM", '||
 '"COGNOM1" '||
'from "STASVWREPORT_TASQUES" ';
-- Les següents línies calculen les condicions de filtres de pantalla
-- Filtre origen
if :P15_ORIGEN!='-1' THEN
w:= w||' AND "STASVWREPORT_TASQUES"."ORIGEN"=:P15_ORIGEN';
end if;
-- Filtre prioritats
if :P15_PRIORITATS<>'-1' then
w:= w||' AND "PRIORITAT"=:P15_PRIORITATS';
end if;
-- Filtre situacions
if :P15_SITUACIONS<>'-1' then
w:= w||' AND "SITUACIO"=:P15_SITUACIONS';
end if;
-- Filtre grup de tasques
w:=
case :P15_GRUPS_TASQUES
when '%' then w||' AND ("STASVWREPORT_TASQUES"."AGR_CODI" LIKE (''%'') or
"STASVWREPORT_TASQUES"."AGR_CODI" IS NULL)'
when '-2' then w||' AND ("STASVWREPORT_TASQUES"."AGR_CODI" IS NULL)'
else w||' AND "STASVWREPORT_TASQUES"."AGR_CODI"=:P15_GRUPS_TASQUES and '||
'"STASVWREPORT_TASQUES"."AGR_ASS_ASS_ID"=:ASSOCIAT '
end;
-- Filtre obertes/tancades
if :P15_OBERTES='O' then
w:= w||' AND "DATA_FINAL" IS NULL';
end if;
if :P15_OBERTES='T' then
w:= w||' AND "DATA_FINAL" IS NOT NULL';
end if;
-- Filtre títol/DESCRIPCIO
IF :P15_TITOL_DESCRIPCIO=1 THEN
IF :P15_TITOL IS NOT NULL then
w:= w || ' AND TRANSLATE(UPPER("STASVWREPORT_TASQUES"."TITOL")';
w:= w || ',''ÀÁÈÉÍÏÒÓÚÜ'', ''AAEEIIOOUU'') ';
w:= w ||'LIKE ';
w:= w ||'TRANSLATE(UPPER(''%';
w:= w ||:P15_TITOL||'%''),''ÀÁÈÉÍÏÒÓÚÜ'', ''AAEEIIOOUU'')';
END IF;
ELSE
IF :P15_TITOL IS NOT NULL then
w:= w || ' AND TRANSLATE(UPPER(';
w:= w || '"STASVWREPORT_TASQUES"."DESCRIPCIO")';
w:= w || ',''ÀÁÈÉÍÏÒÓÚÜ'', ''AAEEIIOOUU'') ';
w:= w ||'LIKE ';
w:= w ||'TRANSLATE(UPPER(''%';
w:= w ||:P15_TITOL||'%''),''ÀÁÈÉÍÏÒÓÚÜ'', ''AAEEIIOOUU'')';
END IF;
END IF;
-- Filtre propietari/gestor
if :P15_GESTOR_PROPIETARI='-1' then
w:= w||' AND ("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR) ';
end if;
if :P15_GESTOR_PROPIETARI='-2' then
w:= w||' AND ("STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR) ';
end if;
if :P15_GESTOR_PROPIETARI='-3' then
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_ASS_ASS_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';
end if;
if :P15_GESTOR_PROPIETARI='-4' then
w:= w||' AND ("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';
end if;
-- Filtre dates
if :P15_SELECCIO_DATES = '1' and :P15_DATA_INICI_F is not null then
w:= w|| 'and ("STASVWREPORT_TASQUES"."DATAINICI" >= :P15_DATA_INICI_F ' ;
w:= w|| 'and "STASVWREPORT_TASQUES"."DATAINICI" <= :P15_DATA_FI_F) ';
end if;
if :P15_SELECCIO_DATES = '2' and :P15_DATA_INICI_F is not null then
w:= w|| ' and ("STASVWREPORT_TASQUES"."PREVISIO_FI" >= :P15_DATA_INICI_F and ';
w:= w|| '"STASVWREPORT_TASQUES"."PREVISIO_FI" <= :P15_DATA_FI_F) ';
end if;
if :P15_SELECCIO_DATES = '3' and :P15_DATA_INICI_F is not null then
w:= w|| 'and ("STASVWREPORT_TASQUES"."DATA_FINAL" >= :P15_DATA_INICI_F and ';
w:= w|| '"STASVWREPORT_TASQUES"."DATA_FINAL" <= :P15_DATA_FI_F) ';
end if;
if :P15_CALCULAR_NUMERO='NUM' then w:= '"STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"="STASTBGESTORS"."GES_ID"(+) '||
'and "STASVWREPORT_TASQUES"."AGR_ASS_ASS_ID"="STASTBAGRUPACIO"."ASS_ASS_ID"(+) '||
'and "STASVWREPORT_TASQUES"."AGR_CODI"="STASTBAGRUPACIO"."CODI"(+) ';
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_ASS_ASS_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';
if :P15_CODIS_GRUPS!='-1' then
w:= w||' and "STASVWREPORT_TASQUES"."CODI_NUMERADOR"=:P15_CODIS_GRUPS ';
else
w:= w||' and "STASVWREPORT_TASQUES"."CODI_NUMERADOR" is null ';
end if;
w:= w||' and "STASVWREPORT_TASQUES"."NUMERADOR"=:P15_NUMERO ';
w:= w||' and "STASVWREPORT_TASQUES"."ANY_NUMERADOR"=:P15_ANY ';
:P15_CALCULAR_NUMERO:='NO';
end if;
w1:= '"STASVWREPORT_TASQUES"."TAS_TAS_ID" is null ' ||w;
q:= q || ' WHERE '|| w1;
-- La mateixa consulta però seleccionant només els TAS_ID
q0 := 'select "TAS_ID" '||
'from "STASVWREPORT_TASQUES" ';
q0:= q0 || ' WHERE '|| w1;
-- q1 dóna les subtasques de les tasques triades a q
-- (STASTBTASQUES"."TAS_ID" in(q0)) i a més a més les subtasques que
-- cumpleixen les condicions de filtres de pantalla
-- (TAS_TAS_ID is not null and w)
q1 := 'select ''Subtasca'' as "Tasca", '||
'"GES_GES_ID", '||
 '"TAS_ID", '||
 '"TITOL", '||
 '"DESCRIPCIO", '||
 '"ASSIGNADA", '||
 '"DATAINICI", '||
 '"PREVISIO_FI", '||
 '"DATA_FINAL", '||
 '"PRIORITAT", '||
 '"SITUACIO", '||
 '"ORIGEN", '||
 '"NUMERADOR", '||
 '"ANY_NUMERADOR", '||
'"CODI_NUMERADOR", '||
'"NUMERO", '||
'"AGR_ASS_ASS_ID", '||
 '"AGR_CODI", '||
 '"TAS_TAS_ID", '||
 '"TAS_GES_GES_ID", '||
 '"GES_GES_ID_ESTA_ASSIGNADA", '||
'"GESTOR", '||
 '"PUBLICA", '||
 '"GRUP_TASQUES", '||
 '"NOM", '||
 '"COGNOM1" '||
'from STASVWREPORT_TASQUES ';
w21:= '"TAS_TAS_ID" IN ('||q0||')';
w22:= '"TAS_TAS_ID" IS NOT NULL '||w;
w2:='('||w21||') OR ('||w22||')';
q1:= q1 || ' WHERE '|| w2;
q:= q ||' UNION ' || q1;
return q;
end;

Problem solved!!
 
See this part of the query:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if; 
 
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:ASSOCIAT '; 
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if;

Export to excel doesn't work

Hi all,
I'm having a problem with exporting a workbook into an excel sheet.
The problem is that NOTHING HAPPEND. I realy don't know what is going on. For the same account I tried to export another report... and every thing was ok (the only thing that I saw is thet for some I have the option to save the report or open it... and for others It opens directly...)
Does someone ever had the same problem??...

Hi
Try closing the browser session and trying again. I have seen it lock like this sometimes.
Take a look also at this recent thread: Can't export from Disco Plus but am able to export From Desktop
Best wishes
Michael

I recently upgraded to the OS X Mavericks, and Excel doesn't work any longer. Suggestions on the version I should buy to install? Office??

I recenly upgraded to OS X Mav operating system and Microsoft applications I had are no longer supported. What Office package is best for this new operating system

Try LibreOffice. It is free.

How do you save data into an excel file while myRIO is acquiring data? I tried saving it using "Write to file" but it doesn't work for some reason.

I am acquiring cosine wave and a pulse wave as input and I want to store their peak to peak values into an excel file. "Write to File" is not working for it. Is there any other vi which can be used for data logging?
Thank you for your help.

Hi Ssheoran,
Can you provide more detail when you say that the Write to File VI doesn't work? Is there an error given? Or can you just not find the file on your computer? Keep in mind using this file in a Real-Time VI on the myRIO will save files on the myRIO. You will then have to transfer to your PC. Please view the following video as a guide for saving files and transferring them to your computer: (http://www.youtube.com/watch?v=BuREWnD6Eno). Hope this helps.
Best Regards,
Roel F.
Applications Engineer
National Instruments

Export to Excel functionality doesn't work when DataControlScope is shared.

Hi All,
I have a taskflow whose transaction setting is as Below:
1.Always Begin New Transaction
2.DataControlScope is isolated(Share data controls with calling task flow checkbox is unchecked).
I have an Export to Excel functionality with exportCollectionActionListener.The jsff source snippet is given below.
<af:commandMenuItem text="#{smviewcontrollerBundle.EXPORT_TO_EXCEL}"
id="cmi1" icon="/images/excel_icon.jpg"
binding="#{backingBeanScope.backing_fragments_RefSetSearch.cmi1}">
<af:exportCollectionActionListener exportedId="resId1"
type="excelHTML"
filename="SmRefSetCodes"
title="System Reference Inquiry Result"/>
</af:commandMenuItem>
The jsff is used in the above mentioned task-flow.Having this configuration in task-flow,export to excel doesn't export any table data in the excel sheet.But the moment,data-control-scope is changed to shared,export starts working.
Is there any specific reason on this kind of behavior.
In all other task-flows in my application,I have data-control-scope as isolated only,but there,export is working perfectly fine.
Please help.
Thanks,
Gaurav

Hi Frank,
Thanks for your reply.
Exactly,I have just one task-flow in which I have a page fragment for which export to excel is not working.The moment I change the data-control-scope to shared,export functionality starts working.
I do have correct table id mentioned in exportCollectionListener.
Is there anything I need to look into?
Thanks,
Gaurav.

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.

My suggestion:
1) Always using MAC AIR with the power plug in.
2)Don' let the power level of battory fall under 30% percentage.
3)If the MAC can't be recharged now, just let it be with power plugged, WAIT...

SSAS 2012 end Excel functions - mode.sngl doesn't work

Since I've used SSAS 2005 with Excel 2007 my Excel.Mode function worked fine.
Now we have migrated to SQL 2012 and we have installed Excel 2010 --> Excel.Mode is deprecated in the new version and the cube calculations that use this function won't work. The new Excel way to calculate mode is [mode.sngl] but I can't call it from cube
calculations.
I tried to replace the Excel approach with the MDX approach (link below) but the time to calculate is too slow.
http://social.msdn.microsoft.com/forums/en-us/sqlanalysisservices/thread/C70DE994-5815-4B30-A10A-81518F784BD2
Can anyone suggest me how to procede?
Thank you in advance

Hi Mihai,
as I mentioned before I've tried different approaches (see the link) but I didn't find a good MDX solution to work around this issue.
Fortunately (for me) I have a certainty. The numbers involved in my calculation can only be between 0 and 9. Impossible to have more than 9 (cautionary) delivery (measure.[Num. Consegne]) a day for a product in a shop.
So I can work around in this (unconventional and maybe optimizable) way:
CREATE Hidden [Count_01] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 1));
CREATE Hidden [Count_02] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 2));
CREATE Hidden [Count_03] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 3));
CREATE Hidden [Count_04] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 4));
CREATE Hidden [Count_05] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 5));
CREATE Hidden [Count_06] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 6));
CREATE Hidden [Count_07] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 7));
CREATE Hidden [Count_08] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 8));
CREATE Hidden [Count_09] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 9));
CREATE Hidden [MaxCount] =
max({MEASURES.[Count_01],MEASURES.[Count_02],MEASURES.[Count_03],MEASURES.[Count_04]
,MEASURES.[Count_05],MEASURES.[Count_06],MEASURES.[Count_07],MEASURES.[Count_08]
,MEASURES.[Count_09]});
CREATE MEMBER CURRENTCUBE.[MEASURES].[Moda Consegne __TEST__3]
as measures.MaxCount,
NON_EMPTY_BEHAVIOR = { [Num Consegne] };
CREATE MEMBER CURRENTCUBE.[MEASURES].[Moda Consegne]
as
CASE measures.MaxCount
WHEN MEASURES.[Count_01] THEN 1
WHEN MEASURES.[Count_02] THEN 2
WHEN MEASURES.[Count_03] THEN 3
WHEN MEASURES.[Count_04] THEN 4
WHEN MEASURES.[Count_05] THEN 5
WHEN MEASURES.[Count_06] THEN 6
WHEN MEASURES.[Count_07] THEN 7
WHEN MEASURES.[Count_08] THEN 8
WHEN MEASURES.[Count_09] THEN 9
ELSE NULL END
NON_EMPTY_BEHAVIOR = { [Num Consegne] };
Hope to be helpful.
Regards,
Davide

Print to pdf often doesn't work with multiple pages?

When I try to print to pdf, it often doesn't work right.
I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
Mark

It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
http://discussions.apple.com/message.jspa?messageID=1983431#1983431

Report Generation Toolkit Evaluation doesn't work

Hello,
I tried to insert data into an Excel file but it seems the Report Generation Toolkit Evaluation doesn't work.
Attached file my VI.
LV is saying i have to activate the product in order to run it. An error occurs on each Report Generation subVI, which involve i never could test my application.
I went on Help/Activate Labview component and the evalution is well activate.
Someone has an idea why the evaluation version doesn't run Report Generation Toolkit ? A solution asap please...
PS : I still have 15 days evaluation left.
Solved!
Go to Solution.
Attachments:
Test_insert_data.vi ‏9 KB
Test.xls ‏14 KB

UP
With message failure
Attachments:
Sans titre.JPG ‏50 KB

PDF Maker Issue - can't find add-in in adobe folder, doesn't work in MS Office 2010.

Hi Guys,
Since last few years I've been using Adobe Acrobat Reader (IX, X, XI) on my Sony Vaio.
It was integrated with MS Office 2010 and worked perfect with Outlook, Word, and Excel.
Last week I had serious isues with my notebook and had to do a clean instalation of Windows 7 64-bit.
I installed all software back (Eset Endpoint Antivirus 5, MS Office 2010 32-bit, etc.) and at the end, yesterday
I finally installed Adobe Acrobat Reader XI (free). Then I noticed with dissapointment that there is no Adobe ribbon.
I did everything mentioned here PDFMaker unavailable | Office 2007, Office 2010 | Acrobat 9, Acrobat X, Acrobat XI
including instalation in a simplified mode, but it doesn't work for me.
The path mentioned in above link doesn't exist in my computer "C:\Program Files\Adobe\Acrobat [9.0 or 10.0]\PDFMaker\Office".
I can find only: "C:\Program Files (x86)\Adobe\Reader 11.0\Reader" - a path to AR app. There is no PDFMaker folder at all.
And another path: "C:\ProgramData\Adobe\Acrobat\11.0\Replicate" - Replicate is the only folder under "11.0".
Do You have any idea what I could do to instal PDFMaker module , and use it with MS Office 2010?
Sorry for my poor English.
I'll be very gratefull for help.

If you have all of those Adobe Reader products on your system, you are asking for problems. Adobe states one should not have more than one copy of an application on their system.
Reader has no plug-in for MS Office of any version.
Only Acrobat has a plug-in for MS Office. Again Adobe does not approve of more than one copy of Acrobat on a system. And if you dare to have Reader on the same system then Acrobat and Reader should be at the same major version.

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
 Severity:1
 Type:PKN3saw9ExceptionE
 File:saxreader.cpp
 Line:681
 Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PM

Problem solved!!
 
See this part of the query:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if; 
 
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:ASSOCIAT '; 
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if;

Excel doesn't work

Similar Messages

Maybe you are looking for