Excel import With Sequance Value

Hi
I need to import data From Excel, but how i can set primary key from a Sequence value??

You do it from outside the Excel -> Import wizard in SQL Developer.
Define your table so your column is populated by a sequence. You can do this via an INSERT TRIGGER.
When you define your Import scenario, leave the ID field alone, i.e. set it such that no values are passed, then your trigger will fire and the sequence.nextval will be used.

Similar Messages

  • Template having export to excel functionality with filter values in WAD

    Hi,
    I need to create a template which has export to excel functionality with all the filter values that the user has selected in the selection screen.
    export to excel can be done but how can be the output excel sheet contain only those values which we see in browser  when the report is executed with some filters.
    Regards,
    Apeksha

    Hi Apeksha,
    you can achieve this requirement (unless I do not know the detailled requirement) perhaps by using this way of implementation:
    1. Create a new template which contains an info_field which does a data binding to the variable values or the characteristic you want to display. Set the visibility of the top container to "hidden". Add a empty data provider to this template. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
    2. Open your original template and include the template you created in step 1 (Advanced: Web Templates and technical name of the web template created in step 2). Choose the appropriate location (above/below the analysis item).
    3. Check the settings of your export command: do not set a special web item to be printed.
    If you export the template within web the second template should be printed correctly displaying the variable settings chosen in step 2 for the info_field.
    Brgds,
    Marcel

  • How to export "Managed by" field of Distribution and Security groups and import with new values? (Exchange 2010, AD 2003)

    My Active Directory environment is 2003 functional level and we have Exchange 2010.
    I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
    I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
    2010 can be used with "get-distribution" but as our AD environment is 2003 is this correct also?
    Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
    Not really sure that the best way to go about this is.
    Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
    existing managedby values with new ones. In some cases we have multiple users as the owners.
    Appreciate any advice on how this can be best achieved. Thank you.

    Hi,
    We can use the following command in Exchange 2010 to export "Managed by" field of Distribution and Security groups:
    Get-DistributionGroup | Select-object Name,@{label="ManagedBy";expression={[string]::join(“;”,$_.managedby)}},Primarysmtpaddress | Export-Csv
    C:\export.csv
    After you changed the Managed by field in export.csv and saved it as a new file named import.csv, we can run the following command to set with new value:
    Import-Csv C:\import.csv | Foreach-Object{ Set-DistributionGroup –Identity $_.Name –ManagedBy $_.ManagedBy}
    Hope it works.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Excel-Import with SBO 2007

    Hello to all!
    I have problems concerning the Excel-Import-function within SAP 2007.
    I want to import some business partners (what should not be such a huge problem), but an internal error occures which states:
    "internal error: Payment Methods for Payment Wizard (OPYM) (-2007) occured.
    After I set up the Payment Wizard it is still not working - now the internal error stats: "(-2007)".
    Experimentally, I tried to import the bp-data into an older version SAP BO 2005 - as personally expected no internal errors occured! even if i do not set up the Payment Wizard...
    Here are some facts to our sbo 2007 version:
    2007A (8.00.178)
    SP: 00
    PL: 44
    I tried to find a thread upon this topic, but I could not find any. Maybe some of you might be able to help me! I am looking forward to it,
    thanks a lot
    daniel

    Hi Daniel,
    i had have similar problems by importing datas via excel function. My suggestion is to import step by step.
    Select a few records and separate it into an extra excel sheet...(5-10 Records)
    First try to import only CardCode, CardName, second try 2 records more. So you will find the records, that makes some trouble.
    Regards Steffen
    (P.S. I think it could be the g/l account definition, but i am not sure.)

  • How to export "Managed by" field of Distribution and Security groups and import with new values?

    My Active Directory environment is 2003 functional level and we have Exchange 2010.
    I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
    I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
    2010 can be used with "get-distribution" but as our AD envronment is 2003 is this correct also?
    Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
    Not really sure that the best way to go about this is.
    Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
    existing managedby values with new ones.
    Appreciate any advice on how this can be best achieved. Thank you.

    Hi Barkley,
    You can also refer to Official Scripting Guys forum to get a script solution:
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy Wang

  • Export from ALV to Excel - problem with numeric values

    hi folks,
    when exporting from alv to excel and we have negative values (and using an u.s.a. setting where . and , are different to r/3) negetive values are not shown correctly in excel.
    when changing in win nt the regional settings to europe one's (e.g. germany) everything works fine.
    any hints welcome,
    kind regards
    oliver

    I guess this has something to do with the excel settings. In the control panel you have regional settings.try some options there. It might work.
    Regards
    Sudhi

  • Importing a text file with variable values into web reporting

    Hello,
    I'm looking for a possibility to import values from a text file into a variable selection in Web reporting.
    With BEx reporting in Excel this is possible, by clicking on the multiple selection button in the variable popup screen, and subsequently selecting the "Import from Text file" button.
    However, this function seems not to be available for web-reporting...
    It would be great if someone could help me out with this!
    Thanks & regards,
    Arvid

    Hi,
    we could resolve this issue, so i thought it may also be helpful for others:
    In our example we used a file with numbers for materials. This file is stored somewhere in a directory, to which SAP BI must have authorization to read.
    The file looks something like this:
    4711
    4712
    4713
    4714
    The file is named "import.txt" and lays in directory "/usr/sap/EC6/files/bi/"
    *&  Include           ZXRSRU01
    * global variables
    Data: intern_range LIKE LINE OF i_t_var_range,
          l_s_range    TYPE rsr_s_rangesid,
          line(100)    TYPE c,
          p_file(128)  TYPE c,
          length_rangelow  type i,
          tmp_rangelow     like l_s_range-low.
    * internal tables for selection-transfer from transaction
    * Data: BEGIN OF it_file occurs 0,
    *        it_p_file(128) TYPE c,
    *      END of it_file.
    IF i_step = 1.
    ** variables can be changed or set before pop-up appears
      CASE i_vnam.
    * take material from external file to selection-list
         WHEN 'ZSD_UPMA'.
    ** call of transaction, with which the path can be set
    *CALL TRANSACTION 'ZBW_VARIABLE' using it_file
    *MODE 'A'      " call should be visible, so that variable can be set
    *UPDATE 'S'.   " first transaction, then processing
    ** Der Pfad, der in dem Selektionsbild eingegeben wird, wird an die Variable übergeben
    ** Der Set-Parameter ist in Report ZSD_SELECT_VARIABLE
    *  get parameter id 'VAR' field p_file.
    p_file = '/usr/sap/EC6/files/bi/import.txt'.
    * further handling of variable in BI
          OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc = 0.
            READ DATASET p_file INTO line.
            WHILE sy-subrc = 0.
              IF line(2) <> '//'.
                l_s_range-sign = 'I'.
                l_s_range-opt  = 'EQ'.
                l_s_range-low  = line.
    * fill with leading Zeros
    * in variable tmp_rangelow the value from l_s_range-low is taken
        tmp_rangelow    = l_s_range-low.
    * read the length
        length_rangelow = strlen( tmp_rangelow ).
    * in our case: material has 18 characters
        while length_rangelow lt 18.
          CONCATENATE '0' tmp_rangelow INTO tmp_rangelow.
          length_rangelow = length_rangelow + 1.
        endwhile.
    * initialize l_s_range-low
        clear l_s_range-low.
    * set with filled values
        l_s_range-low = tmp_rangelow.
    * transfer to structure
                APPEND l_s_range TO e_t_range.
              ENDIF.
              READ DATASET p_file INTO line.
            ENDWHILE.
          ENDIF.
          CLOSE DATASET p_file.
        ENDCASE.
    ELSEIF i_step = 2.
    ** in step 2 all variable values from pop-up input can be processed or
    ** User Exit variables can be derived
    * UserExit Ende.
    ENDIF.
    Hope i could help!
    Best regards,
    Tobias

  • How do you populate a page item in apex with a value read from excel

    Dear All
    I am working on application where I am uploading a csv file in oracle apex. I then need to access a value in Cell B2 of the csv file and populate a page item called
    :P2100_AUTHORISATION_ID with this value. Many of the examples I have found upload the data using v_data-array into a table but I don't need to do that I just need to get the value from the csv file and then display additional information about the file allowing the user to either or continue or cancel the request to upload. I am running into a small problem that I can't explain and wondered if anyone had any ideas.
    Here is the code I am using to try and populate and item called :P2100_AUTHORISATION_ID but when I poulate the item the value is always 0. But if I replace the line :P2100_AUTHORISATION_ID:= v_data_array(2) with a raise_application_error(-20001,v_data_array(2)); The correct value is displayed in the eror. Any Help would be appreciate and I apologise in advance if this akes no sense at all:-)
    declare
    --variables needed to read excel data from flow files
    v_blob_data BLOB;
    v_blob_len NUMBER;
    v_position NUMBER;
    v_raw_chunk RAW(10000);
    v_char CHAR(1);
    c_chunk_len number := 1;
    v_line VARCHAR2 (32767) := NULL;
    v_data_array wwv_flow_global.vc_arr2;
    v_rows number;
    v_sr_no number := 1;
    begin
    --------------------------------------get file info from www_flow_files
    select blob_content into v_blob_data from wwv_flow_files
    where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USER) and id = (select max(id) from wwv_flow_files where updated_by = :APP_USER);
    v_blob_len := dbms_lob.getlength(v_blob_data);
    v_position := 1;
    --Read and convert binary to char
    WHILE ( v_position <= v_blob_len ) LOOP
    v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
    v_char := chr(p_bl_wd_data_entry.hex_to_decimal(rawtohex(v_raw_chunk)));
    v_line := v_line || v_char;
    v_position := v_position + c_chunk_len;
    -- When a whole line is retrieved
    IF v_char = CHR(10) THEN
    -- Convert comma to : to use wwv_flow_utilities </span>
    v_line := REPLACE (v_line, ',', ':');
    -- Convert each column separated by : into array of data </span>
    v_data_array := wwv_flow_utilities.string_to_table (v_line);
    --get filename from wwv_flow_files
    select filename into :P2100_FILE_NAME from wwv_flow_files where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USER) and id = (select max(id) from wwv_flow_files where updated_by = :APP_USER);
    :P2100_AUTHORISATION_ID:= v_data_array(2);
    -- Clear out
    -- v_line := NULL;
    --v_sr_no := v_sr_no + 1;
    END IF;
    END LOOP;
    end;
    Best Regards
    Lynn

    Hi Joel
    Continuing on from my last question, there was something else I want to ask if you dont mind.
    Now that I have the v_data_array(2) value in a page item I would like to use as an input value to a procedure to return some information I need displayed on the page. To do this I need to convert it to a number but when I try to so this I get the following error
    ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    When I use the wwv_flow.debug that you told me about it is outputting a value '4851 ' so it look like there may be some sort of asii character causing a problem. I have tried using trim(v_data_array(2)) and ascii(v_data_array(2)) but nothing seems to work.
    Would you know how to convert a v_data_array value to a number? At the moment I am attemting to do it withiin the same code I attached in my earlier post but I have replaced the assignment of :P2100_AUTHORISATION_ID with the code below where P_BL_WD_DATA_ENTRY.getauthid is the procedure returning the values I need.
    :P2100_AUTHORISATION_ID:= P_BL_WD_DATA_ENTRY.getauthid(to_number(v_data_array(2)));
    Thanks
    Lynn

  • Problem import excel table with photos

    When I import excel table with photos, the photos don't appear

    Welcome to Project Siena!
    If you're seeing an 'x' instead of your photo in the data source it's possible that Project Siena can't access the directory.  Try saving your images in another folder such as C:\Users\Public\Pictures.
    Others have also reported that if the Library isn't set up correctly in Windows 8 that they've had issues.
    Here are some posts to look at while we wait for additional information from you:
    Importing local images via an Excel file
    Siena Gallery unable to load image
    Images in Public Pictures directories showing
    up as X in Img from URL
    (fyi - this last post's screenshot will look different than yours as it was from Beta 1.)
    Thor

  • Example program for returninng and importing with value addition

    HI ,
    I want few example programs on how to use the abap oops with returning addition and importing with value addition as Im getting syntax error for the Program when Im declaring them with these additions
    Thnaks .

    Hello,
    This statement declares a general instance method meth. Use additions ABSTRACT and FINAL to make the method abstract or final.
    The additions IMPORTING, EXPORTING and CHANGING define the parameter interface of the method. After every addition, the corresponding formal parameters are defined by a specification of the list parameters.
    The other additions determine which exceptions the method can propagate or trigger and determine whether the method is abstract or final.
    Note
    Within a method, you can use the logical expression IS SUPPLIED to check whether an actual parameter was assigned to an optional formal parameter at the call.
    Addition 1
    ... IMPORTING parameters PREFERRED PARAMETER p
    Effect
    IMPORTING defines input parameters. When calling the method, you need not specify an appropriate actual parameter for every non-optional input parameter. During the call, the content of the actual parameter is passed to the input parameter. The content of the input parameter - for which the reference transfer is defined - cannot be changed in the method.
    Use PREFERRED PARAMETER to identify an input parameter p1 p2 ... of list parameters after IMPORTING as a preferred parameter. This specification makes sense only if all input parameters are optional. When calling the method with the syntax
    CALL METHOD meth( a ).
    the actual parameter a is assigned to the preferred parameter if you have appropriate use of a functional method at an operand position.
    Addition 2
    ... EXPORTING parameters
    Effect
    EXPORTING defines output parameters. When calling the method, you can specify an appropriate actual parameter for every output parameter. The content of the output parameter - which is defined for value transfer - is passed to the actual parameter at the call after the method has been completed successfully.
    Note
    An output parameter that is defined for the reference transfer is not initialized when the method is called. Therefore, no read access to it should take place before the first write access.
    Addition 3
    ... CHANGING parameters
    Effect
    CHANGING defines input/output parameters. When calling the method, you must specify an appropriate actual parameter for every non-optional input/output parameter. The content of the actual parameter is passed to the input/output parameter at the call, and after the method has been completed, the content of the input/output parameter is passed to the actual parameter.
    Example
    The method read_spfli_into_table of this example has an input and an output parameter, which are typed fully by reference to the ABAP Dictionary.
    CLASS flights DEFINITION.
      PUBLIC SECTION.
        METHODS read_spfli_into_table
           IMPORTING VALUE(id)  TYPE spfli-carrid
           EXPORTING flight_tab TYPE spfli_tab.
    ENDCLASS.
    Addition 4
    ... RAISING exc1 exc2 ...
    Effect
    Use addition RAISING to declare the class-based exceptions exc1 exc2 ... that can be propagated from the method to the caller.
    For exc1 exc2 ..., you can specify all exception classes that are visible at this position and are subclasses of CX_STATIC_CHECK or CX_DYNAMIC_CHECK. You must specify the exception classes in ascending order corresponding to their inheritance hierarchy.
    Exceptions of the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be declared explicitly, otherwise a propagation results in a violation of the interface. An interface violation results in a treatable exception CX_SY_NO_HANDLER. Exceptions of category CX_NO_CHECK are always implicitly declared.
    Notes
    The declaration of exceptions of category CX_STATIC_CHECK is checked statically at the syntax check. For exceptions of category CX_DYNAMIC_CHECK, the check is executed at runtime.
    In a method in which class-based exceptions are declared with the addition RAISING, you cannot use the statement CATCH SYSTEM-EXCEPTIONS. Instead, handle the relevant treatable exceptions in a TRY control structure.
    Example
    In class math, you can propagate all exceptions represented by class CX_SY_ARITHMETIC_ERROR and its subclasses from within method divide_1_by. If, for example, the input parameter operand is filled at the call with the value 0, then the exception CX_SY_ZERODIVIDE is triggered, propagated, and can, as shown in the example, be handled by the caller in a TRY control structure.
    CLASS math DEFINITION.
      PUBLIC SECTION.
        METHODS divide_1_by
           IMPORTING operand TYPE I
           EXPORTING result  TYPE f
           RAISING   cx_sy_arithmetic_error.
    ENDCLASS.
    CLASS math IMPLEMENTATION.
      METHOD divide_1_by.
        result = 1 / operand.
      ENDMETHOD.
    ENDCLASS.
    START-OF-SELECTION.
    DATA oref TYPE REF TO math.
    DATA exc  TYPE REF TO cx_sy_arithmetic_error.
    DATA res  TYPE f.
    DATA text TYPE string.
    CREATE OBJECT oref.
    TRY.
        oref->divide_1_by( EXPORTING operand = 4
                           IMPORTING result = res ).
        text = res.
      CATCH cx_sy_arithmetic_error INTO exc.
        text = exc->get_text( ).
    ENDTRY.
    MESSAGE text TYPE 'I'.
    Addition 5
    ... EXCEPTIONS exc1 exc2 ...
    Effect
    Use addition EXCEPTIONS to define a list of non-class-based exceptions exc1 exc2..., which can be triggered with the statements RAISE or MESSAGE RAISING in the method. You specify identifiers exc1 exc2 ... for the exceptions to be defined at will and directly. Exceptions defined in this way are bound to the method - similar to formal parameters - and cannot be propagated.
    If such an exception is triggered in a method and no return value has been assigned to it in the addition EXCEPTIONS of the CALL METHOD statement in the method call, then a runtime error occurs.
    Note
    The additions RAISING and EXCEPTIONS cannot be used simultaneously. For new developments starting at release 6.10, we recommend to use class-based exceptions, which are independent of the respective method.
    Example
    In the class math, for method divide_1_by an exception arith_error is defined, which is triggered in the method with the RAISE statement if an arithmetic error occurs. If, for example, the input parameter operand is filled with value 0 at the call, the exception arith_error is triggered in the method-internal handling of exception CX_SY_ZERODIVIDE and handled after the call of the method by evaluating sy-subrc.
    CLASS math DEFINITION.
      PUBLIC SECTION.
        METHODS divide_1_by
           IMPORTING  operand TYPE I
           EXPORTING  result  TYPE f
           EXCEPTIONS arith_error.
    ENDCLASS.
    CLASS math IMPLEMENTATION.
      METHOD divide_1_by.
        TRY.
            result = 1 / operand.
          CATCH cx_sy_arithmetic_error.
            RAISE arith_error.
        ENDTRY.
      ENDMETHOD.
    ENDCLASS.
    START-OF-SELECTION.
    DATA res  TYPE f.
    DATA oref TYPE REF TO math.
    CREATE OBJECT oref.
    oref->divide_1_by( EXPORTING  operand = 4
                       IMPORTING  result  = res
                       EXCEPTIONS arith_error = 4 ).
    IF sy-subrc = 0.
      WRITE res.
    ELSE.
      WRITE 'Arithmetic error!'.
    ENDIF.
    Regards.

  • Inability to import Excel data with xlsx or xlsm extensions

    Inability to import Excel data with xlsx or xlsm using Microsoft Project Standard V14 Import Wizard.   
    Get error message"Project cannot recognize this file format. Do you want to open this file in text only?"   when using xlsm.
    Nothing  no wizard or data when when trying xlsx.
    Windows XP/Office 2007. SP1 for MSP2010 installed.
    Thank you in advance.   Pete

    Pete H --
    No, it is not possible to import Excel files with either the xlsx or the the xlsm file extension.  This is simply a limitation of the Import/Export Wizard.  Sorry.  Hope this helps.
    Dale A. Howard [MVP]
    VP of Educational Services
    msProjectExperts
    http://www.msprojectexperts.com
    http://www.projectserverexperts.com
    "We write the books on Project Server"

  • Import Purchase orders failing with numeric/value error issue

    Import Purchase orders failing with numeric/value error issue

    Hi All,
    Import Purchase Orders program is failing with PL/SQL Numeric or Value Error.
    DECLARE
    ERROR at line 1:
    ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at line 55
    Kindly help me to get the issue fixed

  • Setting the footer with the value of a cell - Excel 2010-2013

    Hi,
    is it possible to set the footer of a workbook with the value of a cell without using VBA code or macro?
    Thanks

    No; it is not possible to enter a formula that refers to cells in the header or footer. A VBA macro is the only way to set the header or footer to the value of a cell.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Excel Upload with Hidden Column

    Hi Gurus-
    Can you upload Excel file with hidden column and get the function to read values in hidden column? If yes, could you please guide me how?
    I am using ALSM_EXCEL_TO_INTERNAL_TABLE
    Any help will be highly appreciated.
    Thanks in advance!

    Hi,
    Have a look at program RSDEMO01 (available in the controls examples of the workbench). It demonstrates an OLE connection to Excel.
    To know which excel objects, methods and properties to use it is a good idea to use the excel macro recorder - just do what you want your program to do and then translate the resulting VB code to ABAP OLE.
    For the import of the clipboard data you can use CL_GUI_FRONTEND_SERVICES=>CLIPBOARD_IMPORT. In the result table, iirc, there  is one line for each imported line and within the line the cell values are separated by tab. So there is some work left - it might be a good idea t import the data column by column.
    It has been some time when I did this for a former client of me - so unfortunately I do not have the code any more.
    Regards, Gerd Rother

  • Not able to import Attribute Text Values in Taxonomy table

    Hi Experts,
    I have an excel file with 54K records of Attribute text values need to import in to taxonomy table. my excel file has 3 fields like ID, Name, Text Values. While mapping the fields in feild mapping grid, I have mapped ID field with Attribute Alias, Name with Attribute name, Text Value with Text Value and clone field of Text Value with [Text Value Remote Key]. Based on the field mapping I was trying to map values for ID filed with Attribute Alias field. Here I found Attribute Alias field has values in destination grid which were imported before for Attribute Name ID's in to the Alias field for attribute names.
    Here I found these values are different when I tried to map these values and the Value map buttons(Automap/Map/Add) were disabled.
    in the same way I tried with out maping the values for Attribute value id and selected the Attribute Alias field as value mapping field. but here in the import actions tab the records are active and disabled the import action option.
    so I have executed the import process, but no attribute text values were imported in to Taxonomy table.
    I am using the MDM 7.1 with build version 7.1.01.46.
    Please let me know if anyone came across this situation.
    Thanks,
    RDNPrasad

    problem solved

Maybe you are looking for