Excessive CPU usage due to SharePoint 2010 recompiling core .ascx files continuously

I am having an issue with a SharePoint 2010 farm which in the past few days is suffering from severe performance issues.
Looking deeper, it started with Application Pools restarting every couple of minutes due to the following reason;
"Shutdown Reason: Recompilation limit of 15 reached HostingEnvironment initiated shutdown HostingEnvironment caused shutdown"
After changing numRecompilesBeforeAppRestart in web.config (the global one under .NET config) to a high value, the pools now restart every 10 minutes or so.
Leading on from this, the question is what is recompiling to trigger this event (the default of 15 is not an issue on any other farm I look after), so doing a sysinternals procmon on csc.exe (the compiler that keeps appearing all the time) it appears various
ascx files are being recompiled continuously, I suspect for every request.
I would expect the compilation to take place once, each time the page is visited / pool is warmed up, but this compiling is continuous, until the compilation limit is reached and the pool dies. As each request is getting a compile it also means they are
v slow (30 secs plus) or timing out. Files being recompiled include; MySiteTopNavigation.ascx, PublishingConsole.ascx, LookupFieldEditor.ascx, WorkflowStatus.ascx - all core SP files.
Any ideas on why this runaway behaviour may be taking place?

All fixed - antivirus exclusions hadn't been applied to the host, so the compiled files were being interfered with. Exclusion added environment settled a few minutes later!

Similar Messages

10.9.4 excessive CPU usage

And now a strange case...
Installed 10.9.4 but it became unusable because of excessive CPU usage. Reverted back to 10.9.3 but now the problem persists!
Basically, if connect the Ethernet cable the CPU increases and temp raises from 45C to 95C. As soon as I remove the Ethernet cable and stay on WiFi things go back to normal. I already have done the most obvious, i.e. reinstalling the OS from time machine, removing launch daemons and plug-ins, and fixing disk permissions. Check the details below. Any idea? It would be much appreciated. I'm getting nuts with this.
Top Processes by CPU: (Ethernet not connected)
      41% Mail
      12% revisiond
      6% opendirectoryd
      5% WindowServer
      4% mtmd
Top Processes by CPU: (Ethernet connected)
      47% ocspd
      47% apsd
      35% configd
      33% mDNSResponder
      20% networkd
Full detais:
EtreCheck version: 1.9.12 (48)
Report generated 18 July 2014 11:45:23 NZST
Hardware Information:
MacBook Pro Intel Core i5, Intel Core i7 (Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
LED Cinema Display 2560 x 1440
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:5:13
Disk Information:
APPLE SSD TS128B disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 120.47 GB (13.11 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information:
Jmicron Corp. Usb production 1 TB
EFI (disk2s1) <not mounted>: 209.7 MB
EXTRA (disk2s2) /Volumes/EXTRA: 999.86 GB (301.61 GB free)
Apple Inc. Display Audio
Apple Inc. Display iSight
Apple Inc. Apple LED Cinema Display
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Western Digital External HDD     500.11 GB
TM (disk1s1) /Volumes/TM: 500.11 GB (110.12 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.16) Support
[not loaded] com.libusb.USB_Shield (6.0) Support
Startup Items:
Jaksta: Path: /Library/StartupItems/Jaksta
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Login Items:
smcFanControl
Mail
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
None
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 112.20 GB Disk used: 99.99 GB
Destinations:
TM [Local] (Last used)
Total size: 465.76 GB
Total number of backups: 84
Oldest backup: 2012-11-18 19:49:30 +0000
Last backup: 2014-07-17 02:17:01 +0000
Size of backup disk: Excellent
Backup size 465.76 GB > (Disk size 112.20 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      47% ocspd
      47% apsd
      35% configd
      33% mDNSResponder
      20% networkd
Top Processes by Memory:
254 MB mds_stores
147 MB com.apple.IconServicesAgent
115 MB Mail
90 MB Dock
74 MB Finder
Virtual Memory Information:
4.68 GB Free RAM
1.99 GB Active RAM
331 MB Inactive RAM
1.01 GB Wired RAM
187 MB Page-ins
0 B Page-outs

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Mountain Lion Mail excessive CPU usage

Evers since upgrading to ML 10.8 and 10.8.1, Mail heats the CPU up to 100% after a couple of minutes and remains like this forever. Absolutely reproducible. Mail is unusable for me.
I have some 25.000 Mails in my Inbox. Sampling Mail always reveals the same pattern. Looks like Mail is constantly iterating over my 25.000 emails and tries to layout them. Looks crazy to me.
Here is an excerpt of the sample:
Sampling process 3458 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling Mail (pid 3458) every 1 millisecond
Process:         Mail [3458]
Path:            /Applications/Mail.app/Contents/MacOS/Mail
Load Address:    0x10e285000
Identifier:      com.apple.mail
Version:         6.0 (1486)
Build Info:      Mail-1486000000000000~2
Code Type:       X86-64 (Native)
Parent Process: launchd [158]
Date/Time:       2012-09-03 10:39:43.345 +0200
OS Version:      Mac OS X 10.8.1 (12B19)
Report Version: 7
+
!   :   |
+ 828 __CFRunLoopDoObservers (in CoreFoundation) + 369 [0x7fff848ec031]
+
!   :   |
+   828 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ (in CoreFoundation) + 23 [0x7fff848ec0c7]
+
!   :   |
+
802 __83-[NSWindow _postWindowNeedsDisplayOrLayoutOrUpdateConstraintsUnlessPostingDisabled]_block_ invoke_01208 (in AppKit) + 46 [0x7fff83afdc81]
+
!   :   |
+
! 800 _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints (in AppKit) + 738 [0x7fff83535c3c]
+
!   :   |
+
! : 800 ??? (in Mail) load address 0x10e285000 + 0x2e467 [0x10e2b3467]
+
!   :   |
+
! :   800 -[NSView displayIfNeeded] (in AppKit) + 1830 [0x7fff83536703]
+
!   :   |
+
789 -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] (in AppKit) + 4675 [0x7fff8356c79d]
+
!   :   |
+
| 789 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 314 [0x7fff83570b73]
+
!   :   |
+
|   787 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + 786 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + ! 785 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + ! : 782 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + ! : | 774 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + ! : | + 773 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + ! : | + ! 767 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 5763 [0x7fff83572474]
+
!   :   |
+
|   + ! : | + ! : 753 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] (in AppKit) + 817 [0x7fff83571122]
+
!   :   |
+
|   + ! : | + ! : | 751 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2704 [0x7fff83573509]
+
!   :   |
+
|   + ! : | + ! : | + 751 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 1656 [0x7fff835730f1]

This problem was solved.
After a lot of frustration (restoring Lion backup and performing the update several times), I managed to have a stable installation without the problem of high CPU usage and high temperatures.
It seems that the installation procedure has an issue, when your user directories are located in an external disk. In this particular case, after the installation of the server software, the two links in /Network/Servers directory, pointing to the / directory, do not get created, so you need to do that manually.
That, in itself, was not causing my excessive CPU usage, but it didn't allow my users to log in the server. Thinking that this was the issue described in http://support.apple.com/kb/TS2938, I was running the command described in the previous link to fix the issue. That command (sso_util configure -r REALM_NAME -a diradmin afp) was what was killing my CPU.
All is well, when it ends well, I guess.

Flash: excessive CPU usage

I'm on Mac OS X 10.5.7 and latest version of flash 10,0,32,18, and I notice that CPU usage is really excessive for pretty much any page that has even a small flash content embedded in Firefox 3.5.1. Just having for example a paused flash video uses 16% CPU constantly, and playing the video spikes the CPU usage from 56 to 76%.
And this is on dual Xeon, 2.8 GHz, 8 core Mac Pro with nVIDIA GeForce 8800 GT 512 MB video card, and 32 GB of RAM. I can only imagine how really frustrated users on notebooks must be.
I think flash is really reaching the tipping point where it is becoming unusable and it is really time to start looking into sane alternatives.

I do agree. Though, to be fair, people use the software that Adobe creates to create their own software that runs in the flash player. The player can be as well written as it is possible to be, and still have this type of problem if independent developers write poor software. This is not in Adobe's control.
My note is that it is a known bug for player 10 to be excessively wasteful on the Mac platform, regardless of how well the program running is programmed. This is a bug that they are currently working on fixing, to all publicly facing knowledge.
The only way to truly get rid of this is to get the developers out there in the world educated in good programming habits. Actionscript 3 has done a lot in terms of pushing the community towards that goal, but bad practices are still extant. People don't remove event listeners when they are finished with them. People don't set variables to null for garbage collection. Both of these are probably the biggest problems, leaving things in memory that you aren't even using anymore. And there is nothing Adobe can do about it except attempt to educate the masses.

Xorg-server 1.9 excessive CPU usage through a 32-bit chroot - bug?

Xorg goes crazy tapping my cpu usage when I compile in a 32-bit chroot. >60 % of the total CPU is going to Xorg rather than to gcc (running Gnome if that matters). The htop screenshot below shows X and gdm using it. I know that if I start gnome from init 3 without gdm the same problem occurs except htop just shows X as the culprit.
X :0
Further, packages fail to build when I run makepkg through X. If I run it when I'm in init 3 without X at all the very same package successfully builds. If I leave myself logged into Gnome and open tty1 and enter the chroot there, it builds.
Any thoughts why? That has to be a bug in Xorg given the conditions I explained above. Does anyone have an idea as to preventing this?
I entered the 32-bit chroot via: linux32 chroot /opt/arch32 /bin/bash
The package I was attempting to build under X is a kernel if that matters; here is the last bit of the log before the error:
Here is the last bit before the errors:
gcc: vfork: Resource temporarily unavailable
make[3]: *** [drivers/dma/ioat/pci.o] Error 1
make[3]: *** Waiting for unfinished jobs....
CC [M] drivers/char/agp/ali-agp.o
CC [M] drivers/char/ipmi/ipmi_smic_sm.o
CC [M] drivers/char/agp/ati-agp.o
CC [M] drivers/char/ipmi/ipmi_bt_sm.o
gcc: vfork: Resource temporarily unavailable
make[3]: *** [drivers/char/agp/backend.o] Error 1
make[3]: *** Waiting for unfinished jobs....
CC [M] drivers/char/ipmi/ipmi_watchdog.o
make[2]: *** [drivers/dma/ioat] Error 2
make[1]: *** [drivers/dma] Error 2
CC [M] drivers/char/ipmi/ipmi_poweroff.o
LD drivers/char/mwave/built-in.o
CC [M] drivers/char/mwave/mwavedd.o
make[2]: *** [drivers/char/agp] Error 2
make[2]: *** Waiting for unfinished jobs....
LD [M] drivers/char/ipmi/ipmi_si.o
CC [M] drivers/char/mwave/smapi.o
CC [M] drivers/char/mwave/tp3780i.o
CC [M] drivers/char/mwave/3780i.o
LD [M] drivers/char/mwave/mwave.o
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2
Aborting...
Last edited by graysky (2010-10-02 17:08:42)

Xorg goes crazy tapping my cpu usage when I compile in a 32-bit chroot. >60 % of the total CPU is going to Xorg rather than to gcc (running Gnome if that matters). The htop screenshot below shows X and gdm using it. I know that if I start gnome from init 3 without gdm the same problem occurs except htop just shows X as the culprit.
X :0
Further, packages fail to build when I run makepkg through X. If I run it when I'm in init 3 without X at all the very same package successfully builds. If I leave myself logged into Gnome and open tty1 and enter the chroot there, it builds.
Any thoughts why? That has to be a bug in Xorg given the conditions I explained above. Does anyone have an idea as to preventing this?
I entered the 32-bit chroot via: linux32 chroot /opt/arch32 /bin/bash
The package I was attempting to build under X is a kernel if that matters; here is the last bit of the log before the error:
Here is the last bit before the errors:
gcc: vfork: Resource temporarily unavailable
make[3]: *** [drivers/dma/ioat/pci.o] Error 1
make[3]: *** Waiting for unfinished jobs....
CC [M] drivers/char/agp/ali-agp.o
CC [M] drivers/char/ipmi/ipmi_smic_sm.o
CC [M] drivers/char/agp/ati-agp.o
CC [M] drivers/char/ipmi/ipmi_bt_sm.o
gcc: vfork: Resource temporarily unavailable
make[3]: *** [drivers/char/agp/backend.o] Error 1
make[3]: *** Waiting for unfinished jobs....
CC [M] drivers/char/ipmi/ipmi_watchdog.o
make[2]: *** [drivers/dma/ioat] Error 2
make[1]: *** [drivers/dma] Error 2
CC [M] drivers/char/ipmi/ipmi_poweroff.o
LD drivers/char/mwave/built-in.o
CC [M] drivers/char/mwave/mwavedd.o
make[2]: *** [drivers/char/agp] Error 2
make[2]: *** Waiting for unfinished jobs....
LD [M] drivers/char/ipmi/ipmi_si.o
CC [M] drivers/char/mwave/smapi.o
CC [M] drivers/char/mwave/tp3780i.o
CC [M] drivers/char/mwave/3780i.o
LD [M] drivers/char/mwave/mwave.o
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2
Aborting...
Last edited by graysky (2010-10-02 17:08:42)

Yosemite and Mail massive memory leak and excessive CPU usage

I've just installed Yosemite and upgraded to 10.10.2 via the AppStore. Now I have a problem with Mail sucking up all the CPU (>106% !) and memory (>8Gb and rising while doing nothing). Everything runs fine when I quit Mail. Very disturbing behaviour!
I've tried several suggestions found elsewhere on the board here, such as turning off and even removing all Mail plug-ins including SpamSieve, but without positive results. I've tried un-selecting 'Store draft msgs on server', as well as the option for junk and sent msgs. but again without any difference. Going Offline within Mail also makes no difference to its memory hogging or CPU usage.
I notice this is an issue that's been around since last year (wish I'd known that before upgrading to Yosemite today) and I am just completely flabbergasted that it still exists. Would've thought Apple'd have fixed it in the first but certainly in the second incremental OSX Yosemite release.
Is there anything else I could try that's proven to be effective in stopping Mail's massive memory leak?

Okay, I've run Disk Util and restarted. Seems to have made a little bit of a difference to the RAM gobbling in that it appears to be going at a slower rate, but it's still up at around the 45Gb after an hour. Here's the EtreCheck report in the hope that it helps.
EtreCheck version: 2.1.6 (109)
Report generated 28 January 2015 4:38:22 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Mid 2014) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,3
    1 2.5 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery Health: Normal - Cycle count 16
Video Information: ℹ️
    Intel Iris Pro
        Color LCD spdisplays_2880x1800Retina
    NVIDIA GeForce GT 750M - VRAM: 2048 MB
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:1:19
Disk Information: ℹ️
    APPLE SSD SM0512F disk0 : (500.28 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 499.05 GB (413.24 GB free)
            Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Asmedia ASM107x
        Asmedia ASM107x
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Asmedia ASM107x
        Asmedia ASM107x
            Logitech Logitech USB Optical Mouse
            Apple, Inc. Keyboard Hub
                Apple, Inc Apple Keyboard
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 2
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (5 - SDK 10.5) [Support]
        /Applications/ibVPN.app
    [not loaded]    net.tunnelblick.tap (1.0) [Support]
    [not loaded]    net.tunnelblick.tun (1.0) [Support]
        /Library/Extensions
    [loaded]    at.obdev.nke.LittleSnitch (4231 - SDK 10.8) [Support]
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Support]
    [loaded]    jp.plentycom.driver.SteerMouse (4.2.2 - SDK 10.6) [Support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.AirPlayUIAgent.plist
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cloudd.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.nsurlsessiond.plist
    [killed]    com.apple.pluginkit.pkd.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    [killed]    com.apple.spindump_agent.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    10 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nsurlsessiond.plist
    [killed]    com.apple.softwareupdated.plist
    [killed]    com.apple.wdhelper.plist
    8 processes killed due to memory pressure
Launch Agents: ℹ️
    [running]    at.obdev.LittleSnitchUIAgent.plist [Support]
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Support]
    [running]    com.sophos.uiserver.plist [Support]
Launch Daemons: ℹ️
    [running]    at.obdev.littlesnitchd.plist [Support]
    [running]    com.adobe.adobeupdatedaemon.plist [Support]
    [loaded]    com.adobe.fpsaud.plist [Support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Support]
    [running]    com.sophos.common.servicemanager.plist [Support]
    [running]    com.synium.cleanappdaemon.plist [Support]
    [running]    com.syniumsoftware.CleanAppDaemon.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [running]    com.c-command.SpamSieve.LaunchAgent.plist [Support]
    [loaded]    com.google.keystone.agent.plist [Support]
    [not loaded]    com.linotype.FontFolderProtector.plist [Support]
    [failed]    com.wondershare.mobilegodaemon.plist [Support]
    [not loaded]    info.lokiware.attachmenttamer.cleanup.plist [Support]
    [invalid?]    info.lokiware.attachmenttamer.setupagent.plist [Support]
User Login Items: ℹ️
    Letter Opener Updater    Application (/Library/Mail/Bundles/Letter Opener.mailbundle/Contents/Resources/Software Update.app)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Default Folder X Helper    Application Hidden (/Users/[redacted]/Library/PreferencePanes/Default Folder X.prefPane/Contents/Resources/Default Folder X Helper.app)
    FontExplorer X Pro    Application Hidden (/Applications/FontExplorer X Pro.app)
    Calendar    Application Hidden (/Applications/Calendar.app)
    SteerMouse Manager    Application (/Applications/Utilities/SteerMouse.app/Contents/MacOS/SteerMouse Manager.app)
    Mail    Application Hidden (/Applications/Mail.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    DiskWarriorStarter    Application (/Applications/DiskWarrior.app/Contents/Helpers/DiskWarriorStarter.app)
    finderpop-daemon    Application (/Users/[redacted]/Library/PreferencePanes/FinderPop.prefPane/Contents/Resource s/finderpop-daemon.app)
    XtraFinder    Application Hidden (/Applications/XtraFinder.app)
Internet Plug-ins: ℹ️
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Support]
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
User internet Plug-ins: ℹ️
    iGetter Plugin: Version: 2.9.3 [Support]
    iGetterScriptablePlugin: Version: 2.9.3 [Support]
Safari Extensions: ℹ️
    1Password [Installed]
    iGetter Extension [Installed]
3rd Party Preference Panes: ℹ️
    Default Folder X [Support]
    FinderPop [Support]
    FUSE for OS X (OSXFUSE) [Support]
    SteerMouse [Support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
      105%    Mail
        3%    WindowServer
        2%    sysmond
        2%    Activity Monitor
        0%    fontd
Top Processes by Memory: ℹ️
    4.10 GB    Mail
    103 MB    Finder
    86 MB    SophosScanD
    86 MB    InterCheck
    86 MB    WindowServer
Virtual Memory Information: ℹ️
    84 MB    Free RAM
    2.92 GB    Active RAM
    2.87 GB    Inactive RAM
    2.76 GB    Wired RAM
    2.57 GB    Page-ins
    23 MB    Page-outs
Diagnostics Information: ℹ️
    Jan 28, 2015, 03:37:41 PM    Self test - passed
    Jan 28, 2015, 02:49:01 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Android File Transfer Agent_2015-01-28-144901_[redacted].crash
    Jan 28, 2015, 09:31:04 AM    /Library/Logs/DiagnosticReports/Mail_2015-01-28-093104_[redacted].cpu_resource. diag [Details]
    Jan 28, 2015, 07:39:17 AM    /Library/Logs/DiagnosticReports/AdobeCrashDaemon_2015-01-28-073917_[redacted].c rash
    Jan 27, 2015, 07:54:29 PM    /Library/Logs/DiagnosticReports/AdobeCrashDaemon_2015-01-27-195429_[redacted].c rash

No usage information for SharePoint 2010 or 2013

Hi community,
I try to retrieve information about SharePoint 2010 or 2013 usage (wich user access Enterprise or Standard feature, etc.).
I checked the configuration of IIS log files and it's ok. MAP Toolkit 9.0 parsed the log files, but didn't show any information about usage.
Did I miss something?
Thanks
http://mdeleplanque.wordpress.com

My bad, the date range was not set properly...
I retrieve users and devices in the report generated by MAP Toolkit 9.0 for SharePoint 2010 and 2013.
http://mdeleplanque.wordpress.com

SSRS Report Usage Tracking in SharePoint 2010

We have many SSRS reports and Excel files deployed in SharePoint 2010 library. We want to eliminate any unused reports or Excel files in the SharePoint library. Is there a way to track any report or Excel file not used by end user?
Please advise,
Brian.
Brian

This might do it
select *
FROM
[Usage_Health_Service_Application].[dbo].[RequestUsage]
WHERE DocumentPath
like
'%rdl%'

100% cpu usage due to nio selector.open

Hello guys,
I am developing a multiplayer game using nio.In the begging i read all document related to nio.I have never heared about this api uses 100% cpu at server side as well as client side.
When i start my server which is non blocking the cpu usage is dierctly raise to 100%.Working on Operating System windows 2000.Here is my code of server side.
public void initializeOperations() throws IOException,UnknownHostException
          System.out.println("Inside initialization");
          sel = Selector.open(); //THIS FUNCTION RAISES CPU PERFORMANCE TO 100%....
          server = ServerSocketChannel.open();
          server.configureBlocking(false);
          InetAddress ia = InetAddress.getLocalHost();
          //InetSocketAddress isa = new InetSocketAddress(ia,port);
          InetSocketAddress isa = new InetSocketAddress(ia,port);
          server.socket().bind(isa);
     public void run() //startServer() throws Exception
          try
               System.out.println("Inside startserver run()");
     initializeOperations();
               SelectionKey acceptKey = server.register(sel, SelectionKey.OP_ACCEPT );
               while (acceptKey.selector().select() > 0 )
          Set readyKeys = sel.selectedKeys();
          Iterator it = readyKeys.iterator();
          while (it.hasNext()) {
          SelectionKey key = (SelectionKey)it.next();
          it.remove();
          if (key.isAcceptable())
          System.out.println("Key is Acceptable");
ServerSocketChannel ssc = (ServerSocketChannel) key.channel();
     socket = (SocketChannel) ssc.accept();
     socket.configureBlocking(false);
SelectionKey another = socket.register(sel,SelectionKey.OP_READ|SelectionKey.OP_WRITE);
          if (key.isReadable())
                              System.out.println("Key is readable");
                              String ret = readMessage(key);
                              System.out.println("Frm clinet:"+ret);
                              socket = (SocketChannel)key.channel();
          catch(Exception e)
               System.out.println("Exception in ServerConnection:run()");
               e.printStackTrace();
Please see the code where i mentioned comment at that time cpu usage goes upto 100%.
i searched the forum and find that OP_WRITE is creating problem but in my case even client is not comming than also server side cpu usage raises.
please suggest proper solution
thank you

thank you for your suggestion...
so u r telling to compile my application in new version of jdk and run from there..m i right???ok...
i have tried this also in latest version jdk1.5.0_04 than also my cpu usage raise to 100%..
Now i m trying using 1.4.2_08 hope it will work....
is there any other idea to solve my problem please help me out...
thank you

EXCESSIVE CPU USAGE IN FF 4.0

I have Windows XP, 1 GB RAM and over 10 GB free disk space. When I listen to streaming audio from a radio station, the CPU usage jumps to between 95 and 100%, the entire machine slows down tremendously.

Hi,
I'm using the Tree Style Tab and love it.
However, I was wondering if there's a way to collapse/expand the tab sidebar using a keyboard shortcut.
Ideas, anyone?
Iddo

Excess CPU usage

Hello:
Whenever i turn on my computer , my cpu use goes up to 100% and it stays there fluctuating to no less than 70%, the thing is i have no apps running. I unplugged my lan cabel and restarted , and voila the cpu usage got back to normal fluctuating between 5% and 0% , but everytime i plug the cable it goes up again. What could be happening? IS my mac infected? I ran Norton and it found a trojan in my windows partition , i deleted the file. but the problem still continues.
Another thing, Adium cant connect to msn and im the only mac user i know thats having this problem. I think its related.
Any tips would be aweosme!

For the OSX side, get familiar with the +Activity Monitor+ app (in your Applications/Utilities folder).
It will tell you what's using CPU and memory, plus disk and network stats.
Start by selecting either +All Processes+ or +Active Processes+ in the toolbar, and sorting the list by the highest +% CPU.+
And, it has pretty good Help.

I have high cpu usage due the opendirectoryd activity

Since I have installed Mavericks, my CPU usage is at a constant level of almost 100%,
therefore the fans are speeding up en my batteries runs down very fast.
Before this I had Lion, and everything was running smooth.
In acitivity moinitor I have seen the following activities: opendirectoryd consuming all of my cpu usage.
Also, I can't turn WiFi off, it will automatically turn on immediately.
But even though I closed all my other programs in acitity monitor, this one keeps running and if I force quit it, it opens up again in a second.
When I take a look at my logs there seems to be a major problem:
11-02-14 16:21:56,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:21:56,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:22:13,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:22:13,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:22:33,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:22:34,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:22:53,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:22:54,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:23:11,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:23:11,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
11-02-14 16:23:29,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
If i don't run any programs, this log seems to appear every few seconds.
I have a MacBook Pro form late 2011,
2.4GHz Intel i5 with 4GB RAM and 10.9.1

I just read briefly about this and correct me if I am wrong. If you are using unix, solaris use the top (% top) command by itself at the command prompt. The output will expose the top users on the system. From there you can drill down to work on the bottleneck causing the high cpu useage. It could be that it is just being very over worked and an upgrade is necessary. Or by using (% netstat -i ) the packets may be too small thereby creating alot of traffic on the system. Reducing the amount of packets by increasing their size without splitting them in the system may reduce the cpu useage.
Hope this helps.
al

ME3600X-24CX and high CPU usage due to Nile process

Hi,
if I insert SFP modules into ports CPU usage increases. Now I have 14SFP modules (mostly metalic ones) and the CPU is above 20% permanently. All of them used by Nile process. Which I understand is something which reads interface state and switches on/off the LED lights. I think that such a thing shouldn't eat 20+% of CPU power. There must be something wrong with the process.
As a result the switch is not able to respond to ICMP packets reliably (smokeping graph is very noisy). And I can imagine that other CPU tasks (BGP etc) could be affected too (but maybe the NILE process has lower priority).
Verified on another ME3600X-24CX and checked with various SFP modules.
Regards
Dalibor Toman

I tried to solve the problem by opening a ticket with our vendor. But because Cisco doesn't treat the problem as a bug there is no real solution but a workaround only. We increased the NILE process poll period using this command:
test platform link_poll set_interval 80
The CPU usage lowered significantly. And the response time on smokeping graph is slightly better too (less higher response time peaks on the graph)
I have attached a graph of CPU usage for last 2 years. During may 2014 we replaced Cisco 3650G with the ME3600X and cpu usage went up. Next month we reconfigured the poll period and cpu went lower. During november we moved about 8 links to another device so the CPU usage lowered again.
Regards
D. Toman

Sharepoint 2010 document library pdf files are storing in browser cache when it is opened in browser

i have sharepoint 2010 site which consists of document library with pdf files if we click on pdf file it will open in browser .But the thing is it is storing in browser cache so i need to restrict that pdf to not store in browser cache.
A,ny suggestions please

Hi,
We can use jQuery plugin to open the PDf file in browser.
The following link for your reference:
http://www.jqueryrain.com/2012/09/best-jquery-pdf-viewer-plugin-examples/
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Sharepoint 2010 -Script to get file name from Document Library

Hi
can anybody send be script that works in "SharePoint 2010 management Shell" to get list of file names in document library.
Thank

See my updated answer. The double quotes need to be removed. Also note that you need to use $item.File.Name
and not $item.Name to get the name of the files.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Excessive CPU usage due to SharePoint 2010 recompiling core .ascx files continuously

Similar Messages

Maybe you are looking for