Exchange 2013 Auto Attendant fails when using multiple languages

Hi All,
Trying to setup UM Auto Attendants as I had it in Exchange 2010, but cannot get it to work as I want.
Here is my setup:
Windows 2012 and Exchange 2013.
Parent - Main Auto Attendant (80)
Child - English Auto Attendant (81)
Child - Swedish Auto Attendant (82)
Child - Finnish Auto Attendant (83)
All callers are first connected to 80 where they can select the language to continue with (press 81 for English, press 82 for Swedish, press 83 for Finnish).
This is what I found out this far:
- If I have English language selected on all Attendants everything works fine I can select all choices and everything works as it should.
- If I select the proper language for the other languages (82 & 83) only the connection to 80 & 81 works. If I try to connect from 80 to 82 or 83 nothing happens (connection goes quiet) and the only solution to get UM to answer again is to restart the
UM service on the server.
Extra info/what I tested this far:
- I reinstalled the extra language packs just to be sure there were no issues.
- If I select Swedish or Finnish language on extension 80 they work fine, so the language packs seems to be OK.
Ideas Anyone?
//Ase

Hi All,
After installing CU1 for Exchange 2013 this behaviour changed a little bit. Instead of getting total freeze of the system I get an error message instead saying "System Error Occured" and then a hangup.
I also find out that if I remove the checkbox "Set the auto attendant to respond to voice commands" for the extension 82 & 83 (Swedish & Finnish Auto Attendants) this error does not happen, but I like to use the voice commands....
Also when the error occurs I get the following in the Event Log:
The VoIP platform encountered an exception Microsoft.Exchange.UM.UMCommon.UMGrayException: A non-fatal exception occurred. For details, please see the inner exception. ---> System.InvalidOperationException: The language for the grammar does not match
the language of the speech recognizer.
   at Microsoft.Speech.Recognition.RecognizerBase.ThrowIfSapiErrorCode(SAPIErrorCodes errorCode)
   at Microsoft.Speech.Recognition.FileGrammarContent.Load(SapiGrammar sapiGrammar, Boolean enabled, Single weight, Int32 priority)
   at Microsoft.Speech.Recognition.GrammarContent.Load(SapiGrammar sapiGrammar)
   at Microsoft.Speech.Recognition.Grammar.Load(SapiGrammar sapiGrammar, IRecognizerInternal recognizer)
   at Microsoft.Speech.Recognition.RecognizerBase.LoadGrammarIntoSapi(Grammar grammar)
   at Microsoft.Speech.Recognition.RecognizerBase.LoadGrammar(Grammar grammar)
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.PlayPromptsAndRecoSpeechSessionState.LoadGrammar(UMGrammar grammar)
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.PlayPromptsAndRecoSpeechSessionState.LoadGrammars()
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.PlayPromptsAndRecoSpeechSessionState.InternalStart()
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.SessionState.Start()
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.ChangeState(SessionState nextState)
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.PlayPrompts(ArrayList prompts, Int32 minDigits, Int32 maxDigits, Int32 timeout, String stopTones, Int32 interDigitTimeout, StopPatterns stopPatterns, Int32 startIdx, TimeSpan offset, List`1
grammars, Boolean expetingSpeechInput, Int32 babbleTimeout, Boolean stopPromptOnBargeIn, String turnName, Int32 initialSilenceTimeout)
   at Microsoft.Exchange.UM.UMCore.SpeechMenu.PlayPrompts(ArrayList prompts, BaseUMCallSession vo)
   at Microsoft.Exchange.UM.UMCore.SpeechMenu.SpeechMenuStart(BaseUMCallSession vo)
   at Microsoft.Exchange.UM.UMCore.SpeechMenu.StartActivity(BaseUMCallSession vo, String refInfo)
   at Microsoft.Exchange.UM.UMCore.ActivityManager.ChangeActivity(ActivityBase next, BaseUMCallSession vo, String refInfo)
   at Microsoft.Exchange.UM.UMCore.TransitionBase.Execute(ActivityManager manager, BaseUMCallSession vo)
   at Microsoft.Exchange.UM.UMCore.Menu.OnComplete(BaseUMCallSession vo, UMCallSessionEventArgs voiceObjectEventArgs)
   at Microsoft.Exchange.UM.UMCore.Menu.StartActivity(BaseUMCallSession vo, String refInfo)
   at Microsoft.Exchange.UM.UMCore.ActivityManager.ChangeActivity(ActivityBase next, BaseUMCallSession vo, String refInfo)
   at Microsoft.Exchange.UM.UMCore.TransitionBase.Execute(ActivityManager manager, BaseUMCallSession vo)
   at Microsoft.Exchange.UM.UMCore.Menu.OnComplete(BaseUMCallSession vo, UMCallSessionEventArgs voiceObjectEventArgs)
   at Microsoft.Exchange.UM.UMCore.Menu.StartActivity(BaseUMCallSession vo, String refInfo)
   at Microsoft.Exchange.UM.UMCore.ActivityManager.ChangeActivity(ActivityBase next, BaseUMCallSession vo, String refInfo)
   at Microsoft.Exchange.UM.UMCore.ActivityBase.OnHeavyBlockingOperation(BaseUMCallSession vo, HeavyBlockingOperationEventArgs hboea)
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.HeavyBlockingOperationSessionState.CompleteFinalAsyncCallback()
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.SessionState.CompleteNonTeardownState()
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.<>c__DisplayClassf.<CatchAndFireOnError>b__b()
   at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.UM.UMCommon.ExceptionHandling.ExceptionCatcher(Object exception)
   at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
   at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.CatchAndFireOnError(UserCodeDelegate function) during the call with ID "Y2M5Y2ZhYzYzMzc4ZTVhYmE0ZjE3MmVjYTVmYmRiZTM.". This exception occurred at the Microsoft Exchange Speech Engine VoIP
platform during an event-based asynchronous operation submitted by the server. The server will attempt to recover from this exception. If this warning occurs frequently, contact Microsoft Product Support.
Anyone with ideas that can help me forward?
//Ase

Similar Messages

  • IFCORE-1565: The Dgraph could fail when using a relevance ranking strategy.

    Hi,
    I just saw the release notes for Endeca 6.2.2 and read this bug:
    IFCORE-1565: The Dgraph could fail when using a relevance ranking strategy.
    Is there someone who could provide some more information on this bug? What is it and when does it occur? Reading the word 'could' would suggest a kind of unpredictability?
    Thanks,
    Maarten

    The known trigger for the bug was doing relrank on a query that contained multiple text searches.

  • [svn:bz-4.x] 16147: Fix a few more regression tests on the 4. x branch that were failing when using Spring integration.

    Revision: 16147
    Revision: 16147
    Author:   [email protected]
    Date:     2010-05-17 06:18:38 -0700 (Mon, 17 May 2010)
    Log Message:
    Fix a few more regression tests on the 4.x branch that were failing when using Spring integration.
    Modified Paths:
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/ROMessage Destination.java
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/RuntimeCo nfigurator.java
        blazeds/branches/4.x/qa/resources/webtier/flex_sdk_4/flex-config.xml

    Well heres my story. I tried kde4 from extra the last 3 weeks and I like it. I have used xfce for the past 3 years, previous to that gnome. Tried kde but never really liked it. Now I am only using workspace, base, mutimedia and graphics.
    Here is what I like.
    1- Dolphin, awesome I have used thunar a while and it is great but I love splitview, and fish for ssh (which has been around a while I know), and the ability to mount other partitions on my hdd with a click no fstab entry or nothin'.
    2-Pretty, I've used xfce with built in compositor an love the snappiness. But I like desktop grid with kde4 and flipswitch. Compiz-fusion is cool but I prefer not to use I'll take what the DE gives. Plasmoid are cool too.
    3- Gwenview is nice too. Use to use gqview, but thumnails are nice.
    Looking forward to or lacking
    1- Keyboard shortcuts, Yes xbindkeys is there but if I have a DE I want it to do it. They just don't work now.
    2- kde4 has windows specific settings, but I can't set the opacity for particular windows , doesn't work.
    3- Ram of course is much higher in kde4, but maybe I'm getting old I just don't care as much.

  • Why is quicktime slower when using multiple mdat atoms

    Hi,
    I've been trying to generate a mov file and I noticed that the more mdat atoms I put in my mov file the more the file takes time to load on QuickTime, iTunes.
    Even worst, on the iPhone the file takes more than 3 minutes to load.
    If there are too many mdat atoms quicktime even says that the file is invalid ( error -2004 or -2002, I don't remember exactly).
    Why is quicktime/iTunes slower when using multiple mdat atoms ?
    Thanks,

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • How to use multiple languages in unity connection for greetings

    Hi All,
    I have unity connection 7.5 Version. i want to use multiple languages for greetings. i mean i have different users from different geographical location. so i want to use engilsh, french and spanish. can i customize my setup like that.
    Regards
    Pardha

    Are you talking about the user greeting? Then have them record the greeting anywhere they want in whatever language they want.  If you install multiple locales you can have each user record greeting in different language as well and then the appropriate language greeting will be played on who addresses this user by using "inherit language" feature. Though this will only work when addressing messages from withn voicemail, not by dialing from phone as that will simply use the default routing rule, unless you create custom rules.
    HTH,
    Chris

  • Sapscript -how to use  multiple language ?

    hi all,
      can we use multiple languages in a script. i mean  thet can we print a data from a particular text element
    in different languages.
    is it possible ?
    and also how to handle differnt currencies in sapscript?

    Hi,
    when you use the syntax INCLUDE in sapscript, you could set the language with the command LANG. Have a look to the SapScript documentation.
    Example from the help.sap.com :
    /: INCLUDE MYTEXT
    The text MYTEXT is included in the language of the calling text.
    /: INCLUDE MYTEXT LANGUAGE 'E' PARAGRAPH 'A1'
    The text with the name MYTEXT and the language E is included, regardless of the language of the calling text. The paragraph format A1 will be used as the standard paragraph type for this call.
    For the currency what is the problem ?
    the decimals positions could be manage with the WRITE ... CURRENCY.
    the conversion must be made by SAP itsel, but you could use the function CONVERT_TO_LOCAL_CURRENCY.
    Rgd
    Frédéric
    Message was edited by: Frédéric Girod

  • Exchange 2013 SP1 Setup fails

    I am getting very frustrated. It really shouldn't take over a week to install Exchange.
    I have two domain controllers, Windows 2003 and Windows 2008 R2. The 2008 is now all Operations Masters for all roles.
    I have a clean install of W2K8 R2 SP1 installed under Hyper-V on a separate physical W2K8 server. Before starting the install I used ADSIEdit to ensure there was nothing left in the AD of prior Exchange install attempts. This is the first and only installation
    of Exchange.
    I am running the install as the Domain\Administrator and naturally that account is a member of all the appropriate security groups. RSAT are installed on the Exchange server and using them to access Users and Computers clearly shows this. The install fails
    with the errors below, all of which appear to be incorrect.
    *** BEGIN ERROR ***
    Error:
    Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
    Error:
    You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
    Error:
    Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.  See the Exchange setup log for more information on this error.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
    Error:
    The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
    Error:
    This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from http://go.microsoft.com/fwlink/?LinkId=260990.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
    Error:
    This computer requires the update described in Microsoft Knowledge Base article KB974405 (http://go.microsoft.com/fwlink/?LinkId=262357). Please install the update, and then restart Setup.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7WindowsIdentityFoundationUpdateNotInstalled.aspx
    Error:
    Either Active Directory doesn't exist, or it can't be contacted.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
    Warning:
    Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
    Warning:
    Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
    *** END ERROR
    Why can't Exchange installation see the AD when everything else can?

    It appears that these error messages are pure fiction. I went back to ADSI Edit and removed some MS Exchange container and then reran setup /prepareschema again followed by setup /preparead and finally setup /mosde:install /role:clientaccess,mailbox and
    it churned away for a long time, apparently working.
    It appears than when it says you aren't a member of Schema Admins and that it can't access Active Directory, what it really means is it could find the AD just fine, but didn't like what it saw.
    My guess would be very sloppy programming in which the low level error doesn't bubble up and so when something fails it just assumed you didn't have permissions.
    It's not quite finished yet, but I am beginning to believe it will finish. So that's almost 6 days of non stop effort to install Exchange. It's hard top believe they are allowed to charge for this stuff.

  • Exchange 2013 ECP Login fails HTTP 404 Requested URL: /owa/auth/logon.aspx

    Hi,
    One of our Exchange servers stopped allowing access to OWA and ECP. I have now managed to get OWA working but ECP is still failing. When connecting to ECP using https://servername/ecp/ it asks me for my username and password. After hitting enter it shows
    me an error page:
    Server Error in '/owa' Application.
    The resource cannot be found.
    Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.
    Requested URL: /owa/auth/logon.aspx
    URL in the address bar while on this screen: https://exchangeserver:444/owa/auth/logon.aspx?url=https://exchangeservera:444/ecp/&reason=0
    Question: When the URL points to servername:444/owa/auth/logon.aspx - Is it trying to find the logon.aspx in C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Owa\auth? There is no such file in that directory?
    I have removed and recreated the ECP and OWA virtual directories several times.
    I am trying to login using a domain administrator account.
    Thanks,

    Hi,
    Is there any Exchange server 2010 coexistence with your Exchange 2013 server? If it is, please try the URL
    https://CAS15-NA/ecp?ExchClientVer=15 to access ECP.
    Also run the following to check your OWA and ECP virtual directories:
    Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | FL Identity,*Authentication*
    Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | FL Identity,*Authentication*
    And make sure the Basic and Forms authentications are enabled in
    Default Web Site and Ntlm, WindowsIntegrated
    authentication methods are enabled in
    Exchange Back End. Then restart IIS service by running
    iisreset /noforce from a command prompt window.
    If the issue persists, please collect any event logs or IIS logs for further analysis.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Exchange 2013 IMAP Connectivity Failing

    I have gone through all of the troubleshooting i can find, and can't get IMAP connectivity to work to my Exchange 2013 server.  I have an application that uses IMAP to connect to a mailbox to create and update help tickets.
    I get the following in the log:
    2014-04-03T14:03:25.783Z,00000000000000C7,0,10.10.50.55:993,10.10.50.18:56287,,18,0,53,OpenSession,,
    2014-04-03T14:03:25.798Z,00000000000000C8,0,10.10.50.55:993,10.10.50.18:56288,,14,0,53,OpenSession,,
    2014-04-03T14:03:26.079Z,00000000000000C8,1,10.10.50.55:993,10.10.50.18:56288,,1,27,125,capability,,R=ok
    2014-04-03T14:03:26.236Z,00000000000000C8,2,10.10.50.55:993,10.10.50.18:56288,imaptest,95,37,35,login,imaptest *****,"R=""1274136704c94dce NO LOGIN failed."";Msg=User:imaptest:0a2fa0f8-47d9-4ad0-b6a5-8c4853d301d9:SCS_EX2013DB:SCS-VM-EX2013.*****.com;Proxy:SCS-VM-EX2013.****.com:9933:SSL;ProxyNotAuthenticated"
    I have tried a few different users, and get the same error with each.
    Any ideas??

    Hi,
    To understand more about the issue, I’d like to confirm the following information:
    The detail error message when you login your account in IMAP mode.
    The result when you use telnet to check the IMAP connectivity:
    http://support.microsoft.com/kb/189326/en-us
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange2010 migration to Exchange 2013 federation trust failed (Outlook Provider Failure)

    We are in a migration Exchange 2010 to Exchange 2013.
    On the 'old' Exchange 2010 we are using a Federation Trust to 2 order company's. The federation trust for mailbox's on the exchange 2013 wont work.
    We removed the federation trust on the old exchange 2010 server and create a new federation trust on the new Exchange 2013 server. We also changes the DNS TXT records. Creating the new federation trust without errors. But when the 2 order company's trying
    to connect (add our company name for trust) they get a error.
    A have trying to run a couple tests on the new Exchange 2013 server and found this error:
    [PS] C:\Windows\system32>Test-OutlookWebServices -debug -Identity [email protected] -MailboxCredential(Get-Credential
    cmdlet Get-Credential at command pipeline position 1
    Supply values for the following parameters:
    Credential
    Source                              ServiceEndpoint                    
    Scenario                       Result  Latency
    (MS)
    AM111.AM.LAN                        autodiscover.company.nl            Autodiscover: Outlook
    Provider Failure     144
    AM111.AM.LAN                        webmail.company.nl                
    Exchange Web Services          Success     134
    AM111.AM.LAN                        webmail.company.nl                
    Availability Service           Success     207
    AM111.AM.LAN                                                           
    Offline Address Book           Skipped       0

    Hi,
    Are you add primary SMTP domain as a federated domain? If not, please run below command to achieve this function:
    Add-FederatedDomain -DomainName contoso.com
    Configure federated sharing for the Exchange 2013 organization. Complete the steps in
    Configure federated sharing.
    Configure federated delegation (previous name for federated sharing) for the Exchange 2010 SP2 organization. Complete the steps in
    Configure federated delegation.
    Besides, I find an similar thread about Autodiscover service failed within federated trust, for your convenience:
    https://social.technet.microsoft.com/Forums/ie/en-US/ea192e0a-1363-4cb6-9fc4-2973f64afc23/the-response-from-the-autodiscover-service-at?forum=exchange2010
    Best Regards,
    Allen Wang

  • Exchange 2013 SP 1 fails MSSpeech_SR_TELE.ca-ES.msi

    Hi
    After trying to install exchange 2013 SP 1 it fails with the following error : MSSpeech_SR_TELE.ca-ES.msi couldn't be opened.
    I'm running the upgrade through the command line with elevated privileges.
    I've re downloaded the sp already 2 times to no avail.
    The file exists in the extracted version.
    Same error occurred in CU 2 I've read on forums.
    [03/03/2014 13:27:57.0852] [1] [ERROR] The following error was generated when "$error.Clear();
              Install-MsiPackage `
                -PackagePath ([System.IO.Path]::Combine($RoleLanguagePacksPath, "Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi")) `
                -PropertyValues ("ARPSYSTEMCOMPONENT=1 ALLUSERS=1") `
                -LogFile ([System.IO.Path]::Combine($RoleSetupLoggingPath, "InstallSpeech-ca-ES.msilog"))
            " was run: "Couldn't open package 'C:\Program Files\Microsoft\Exchange Server\V15\bin\Setup\ServerRoles\UnifiedMessaging\[03/03/2014 13:27:57.0852] [1] [ERROR] The following error was generated when "$error.Clear();
              Install-MsiPackage `
                -PackagePath ([System.IO.Path]::Combine($RoleLanguagePacksPath, "Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi")) `
                -PropertyValues ("ARPSYSTEMCOMPONENT=1 ALLUSERS=1") `
                -LogFile ([System.IO.Path]::Combine($RoleSetupLoggingPath, "InstallSpeech-ca-ES.msilog"))
            " was run: "Couldn't open package 'C:\Program Files\Microsoft\Exchange Server\V15\bin\Setup\ServerRoles\UnifiedMessaging\[03/03/2014 13:27:57.0852] [1] [ERROR] The following error was generated when "$error.Clear();
              Install-MsiPackage `
                -PackagePath ([System.IO.Path]::Combine($RoleLanguagePacksPath, "Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi")) `
                -PropertyValues ("ARPSYSTEMCOMPONENT=1 ALLUSERS=1") `
                -LogFile ([System.IO.Path]::Combine($RoleSetupLoggingPath, "InstallSpeech-ca-ES.msilog"))
            " was run: "Couldn't open package 'C:\Program Files\Microsoft\Exchange Server\V15\bin\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi'. This installation package could not be opened. Verify
    that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.".
    [03/03/2014 13:27:57.0852] [1] [ERROR] Couldn't open package 'C:\Program Files\Microsoft\Exchange Server\V15\bin\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi'. This installation package could not be opened. Verify that the package exists and
    that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.
    [03/03/2014 13:27:57.0852] [1] [ERROR] This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package
    [03/03/2014 13:27:57.0852] [1] [ERROR-REFERENCE] Id=SpeechComponent___c2c075b985784599a14e8fa90dbc0403 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup'. This installation package could not be opened. Verify that the package exists and that you
    can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.".
    [03/03/2014 13:27:57.0852] [1] [ERROR] Couldn't open package 'C:\Program Files\Microsoft\Exchange Server\V15\bin\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi'. This installation package could not be opened. Verify that the package exists and
    that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.
    [03/03/2014 13:27:57.0852] [1] [ERROR] This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package
    [03/03/2014 13:27:57.0852] [1] [ERROR-REFERENCE] Id=SpeechComponent___c2c075b985784599a14e8fa90dbc0403 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup'. This installation package could not be opened. Verify that the package exists and that you
    can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.".
    [03/03/2014 13:27:57.0852] [1] [ERROR] Couldn't open package 'C:\Program Files\Microsoft\Exchange Server\V15\bin\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.ca-ES.msi'. This installation package could not be opened. Verify that the package exists and
    that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.
    [03/03/2014 13:27:57.0852] [1] [ERROR] This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package
    [03/03/2014 13:27:57.0852] [1] [ERROR-REFERENCE] Id=SpeechComponent___c2c075b985784599a14e8fa90dbc0403 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup

    Thanks for the update John!
    From what I have read, it can work running the upgrade in Windows Powershell, but the syntax must be right.
    .\Setup.exe /m:upgrade /IAcceptExchangeServerLicenseTerms
    compared to:
    Setup.exe /m:upgrade /IAcceptExchangeServerLicenseTerms
    Rhoderick Milne has a great blog post about this, so check it out: 
    6 Mistakes To Avoid With Exchange 2013 CU Command Line Installations . Personally I haven't tried that - So used to always run any exchange CU/SP or Rollup in the command line :)
    Martina Miskovic

  • Exchange 2013 SP1 setup fails at prerequisite Analysis

    I installed a completely new server network with Hyper-v 2012R2
    I installed two virtual 2012R2 servers: DC01 as the Domain Controller of "testdomain.local" and EX01 as the Exchange server.
    EX01 is joined the domain "testdomain" from DC01
    I log in on EX01 with an in AD created testdomain\exadmin account who is member of domain admins, enterprise admins, schema admins, administrators and group policy creator owners.
    I have run the command Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience,
    NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing,
    Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression,
    Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation, Telnet-Client, RSAT-ADDS
    on EX01
    I have installed the Microsoft Unified Communications Managed API 4.0
    Then I run the Exchange 2013 SP1 setup and the prerequisite check gives the following errors:
    Error:
    You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
    Error:
    Setup encountered a problem while validating the state of Active Directory: Active Directory server  is not available. Error message: Active directory response: The LDAP server is unavailable.  See the Exchange setup log for more information on this
    error.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
    Error:
    Either Active Directory doesn't exist, or it can't be contacted.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
    I can connect with the Active Directory Sites and Domains and other applets to the AD. So Why these errors???
    HELP!
    Regards, Manu
    Manu van Winkel

    Hi, thanks for the answer.
    I restarted the server and did the "run as administrator": same result.
    The first errormessage in the exchangesetup.log is:
    [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server  is not available. Error message: Active directory response: The LDAP server is unavailable.  See the Exchange setup log for more information
    on this error.
    When I run dcdiag /s:DC01 from EX01 it passes all tests except:
    DFSREvent "The RPC server is unavailable"
    KccEvent "The RPC server is unavailable."
    SystemLog  "The RPC server is unavailable."
    Could these be of any influence?
    Running dcdiag on DC01 passes all tests.
    The only thing I changed after setting up DC01, was changing the fixed IP-adres from 192.168.25.3 to 192.168.25.2, but I ran ipconfig /flushdns and ipconfig /registerdns and dcdiag /fix afterwards.
    The only roles installed on DC01 are AD DS (I tried installing exchange before and after adding the AD DS role), AD, DNS, DHCP and Fileservices
    I don't know where to look anymore....
    Manu van Winkel

  • Exchange 2013 cu3 setup fails with 'problem... validating the state of Active Directory... supplied credential... invalid'

    Windows Server 2013; Exchange Server 2013 with Cumulative Update 1
    Cannot install Cumulative Update 3 for Exchange Server 2013. It fails with
    [xxx] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid.  See the Exchange setup log for more information on this error.
    [xxx] [0] [ERROR] Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid.
    [xxx] [0] [ERROR] The supplied credential is invalid.
    (Crosses - XXX - replace original values.)
    I have found that a few others have experienced the same problem but found no solution, nor could come up with anything myself. If it is any hint, Event 40961 was logged in the Event Viewer around the same time on almost all installation attempts to be purely
    conincidental:
    The Security System could not establish a secured connection with the server
    ldap/xxx.xxx/[email protected] No authentication protocol was available.
    Both Windows Server and Exchange Server otherwise work OK, and do not recall any issues with Cumlative Update 1 installation.

    Hi vhr1,
    Based on my knowledge, the Event ID 40961 is a warning message.
    This behavior occurs when we restart the server that was promoted to a DC. The Windows Time service tries to authenticate before Directory Services has started.
    Found some resources for your reference even if the Exchange Version is mismatched:
    http://blogs.technet.com/b/jhoward/archive/2005/04/20/403946.aspx
    http://support.microsoft.com/kb/823712/en-us
    About the error message, "Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid."
    The error message InvalidCredentials means: the wrong password was supplied or the SASL credentials cannot be processed.
    Found a similar thread for your reference, hope it is helpful:
    http://social.technet.microsoft.com/Forums/en-US/98e26ad6-8e43-4ef5-8ff9-e9fee6e76bda/bind-operation-is-invalid?forum=exchangesvrdeploylegacy
    Feel free to contact me if there is any problem.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Scp works when logging with my user id but fails when using another one

    Hello all:
    I wrote a script that uses scp to transfer specific local files to a server. The script takes the user id and password and pass them as scp's parameters for authentication.
    Everything works fine when I uses my own user id to test the script but it fails when I used another id (with ligitimate password) to do the same thing.
    I suspect it's a privilege issue. Both ids belong to the same group. Where should I look to fingure this out?
    Thanks,
    John

    SCP is part of SSH. SSH requires the exchange of authorization keys to prevent man-in-the-middle attacks.
    When you log in the first time you may see a prompt like:
    RSA key fingerprint is 98:2e:d7:e0:de:9f:ac:67:28:d2:42:2e:37:16:58:45.
    Are you sure you want to continue connecting (yes/no)?
    This might be where your script fails. Since it prompts only the first time, you may just have to do one interactive SSH login to create an entry in ~/.ssh/known_hosts
    Or setup User equivalence to omit the exchange of passwords.
    You may find the following interesting:
    Oracle Linux 5 Howto: Installing and using cURL with support for SCP and SFTP
    OL5 Howto: Installing and using cURL with support for SCP and SFTP
    see 3) Set up SSH user equivalence for SCP and SFTP

  • 802.1X PEAP fails when using special characters in login

    I am using MS AD & NPS for 802.1X Enterprise authentication with PEAP (no client certificate - MS-CHAPv2 user credentials for login). This works fine for iOS devices on 8.1 (iPhone 5 and iPad mini) and 6.1.6 (iPhone 3GS) when the user has standard "English" ASCII characters in the username and password.
    However, when I introduce Unicode special accented characters in the login name or password such as French é/ù or Spanish ñ then after accepting the server cert authentication fails with "Incorrect username or password for <WLAN name>". Windows 7 and CentOS 6.5 laptops have no problem authenticating to the same setup with either "English" credentials or ones with special accented characters. I also tried an old iPod touch on ancient software version and that fails, so its not something recently introduced.
    I tried using a different access point (TP-Link instead of Ruckus) and had exactly the same issue, so highly unlikely this is an AP issue.
    Then I setup FreeRadius with and see exactly the same issue, so its highly unlikely to be a MS AD/NPS issue.
    When comparing a working/failed authentication Wireshark packet capture on the NPS server, I see the failed attempt is missing the last 4 packets in the authentication exchange. The last packet sent is an Access-Challenge from the NPS server and no response from the iOS device, so the NPS server never even sends an Access-Reject. The iOS device appears to have decided it can't resolve the special characters and terminates the authentication attempt.
    To me this seems to be an Apple iOS software deficiency when using Unicode special characters in the username or password for 801.2X authentication?

    Enterprise support:
    Call enterprise support  (866) 752-7753  to create  a case ID number
    Get an account at
    http://developer.apple.com/  then submit a bug report to http://bugreporter.apple.com/
    Once on the bugreporter page,
       -- click on New icon
       -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs.  Scroll down to find the area or application that matches the problem.
       -- etc.
    Developers:
    "Submitting Bugs and Feedback
    Your feedback goes a long way towards making our products even better. With Apple Bug Reporter, you can submit bug reports or request enhancements to APIs and developer tools."
    https://developer.apple.com/bug-reporting/

Maybe you are looking for