Exchange Web Services API capabilities

Hi,
I'm trying to evaluate the capabilities of the Exchange API but haven't been able to find answers to the below questions. Appreciate if someone could explain or give me pointers to these specific features I'm after:
Create a Contact/User in the global address list
Search for calendar entries based on attendees who are part of the domain and/or outside the domain
Read all calendar entries (within a time frame) without impersonating individual domain users/mailbox owners
Best Regards,
Sam

Hi Sam,
I don't think 1. can be done using EWS (I'm not absolutely sure though).
2. is possible.
3. while theoretically doable is highly impracticable compared to doing Impersonation (You'd need to grant permissions on each calendar folder, then retrieve the IDs for each of those and specifically bind to each calendar). What do you have against the
EWS Impersonation system? (As opposed to process based impersonation).
Cheers,
Fred
There's no place like 127.0.0.1

Similar Messages

Anyone know how to use Exchange Web Service API in PB Classic 12.5

Trying to figure out how to use the api/dll's of the EWS. I am new to web services in pb so I seem to be going nowhere fast. If you have used it I would appreciate some guidance or better yet code/instruction on how to use/access it/setup. I need to be able to get to exchange (in this case using an office365 test account) and read emails/calendar info etc..
Thanks for any help..
Dave V.

Hi Matt,
I find an article about Overlay a SharePoint calendar with a calendar from Exchange or SharePoint, for your reference:
https://support.office.microsoft.com/en-us/article/Overlay-a-SharePoint-calendar-with-a-calendar-from-Exchange-or-SharePoint-4caebe59-3994-4a94-9322-b31abb8a5e9a?CorrelationId=0cba4045-24cb-4cb2-b6d6-51e4015df3a0&ui=en-US&rs=en-US&ad=US
However, if you want to use SQL Queries and HTML, please contact to Exchange Development Team to get more professional advice.
Best Regards,
Allen Wang

Exchange Web Services (EWS) - InvalidCastException

I have a service that reads the new emails in an Office 365 Exchange mailbox, and saves attachments in a directory.
For most emails it runs well, however I'm getting a lot of the following exceptions lately:
System.InvalidCastException: Unable to cast object of type 'Microsoft.Exchange.WebServices.Data.ItemAttachment' to type 'Microsoft.Exchange.WebServices.Data.FileAttachment'
I will post a piece of my code, could anyone please have a look and tell me what I need to change? It's .NET 4.0, Visual Studio 2010, Visual Basic and the latest Exchange Web Services api, 2.2.
Dim sf As SearchFilter = New SearchFilter.SearchFilterCollection(LogicalOperator.And, New SearchFilter.IsEqualTo(EmailMessageSchema.IsRead, False))
Dim findResults As FindItemsResults(Of Item) = service.FindItems(WellKnownFolderName.Inbox, sf, New ItemView(128))
If findResults.Count > 0 Then
Dim items As ServiceResponseCollection(Of GetItemResponse) =
service.BindToItems(findResults.Select(Function(item) item.Id),
New PropertySet(BasePropertySet.FirstClassProperties, EmailMessageSchema.From, EmailMessageSchema.Sender, EmailMessageSchema.ToRecipients, EmailMessageSchema.IsRead))
For Each itItem As Microsoft.Exchange.WebServices.Data.Item In findResults.Items
If TypeOf itItem Is EmailMessage Then
Dim mailItem As EmailMessage = DirectCast(itItem, EmailMessage)
If itItem.HasAttachments Then
itItem.Load()
For Each Attachment In itItem.Attachments
If TypeOf Attachment Is FileAttachment Then
Dim fa As FileAttachment = itItem.Attachments(0)
pathAttachment = "c:\temp\" & fa.name 'not actual code, but to make this code readable and to the point
Try
fa.Load(pathAttachment) 'save file

It looks like you've hardcoded to always access the first attachment, when really you want to access the current attachment in the For Each loop. (Unless my VB skills are rusty, which is definitely possible!)
Dim fa As FileAttachment = itItem.Attachments(0)

Can't install Microsoft Exchange Web Services Managed API 2.0 - message says it is already installed but it is not.

I tried to install the Microsoft Exchange Web Services Managed API 2.0 but I got a message saying it was already installed and that I should un-install it. However it does not appear in the control panel un-install a program list. I am using
VS2013 on windows 8. What can I do to get it to work?
Mike VE

Hello,
Thank you for your sharing.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Fetching all mails in Inbox from Exchange Web Services Managed API and storing them as a .eml files

I want to fetch all mails in the Inbox folder using EWS Managed API and store them as .eml.
I can store file once I get the file content as a byte[] will
not be difficult, as I can do:
File.WriteAllBytes("c:\\mails\\"+mail.Subject+".eml",content);
The problem will be to fetch (1) all mails with (2)
all headers (like from, to, subject) (I am keeping information of those values of from, to and
other properties somewhere else, so I need them too) and (3)byte[]
EmailMessage.MimeContent.Content. Actually I am lacking understanding of
Microsoft.Exchange.WebServices.Data.ItemView,
Microsoft.Exchange.WebServices.Data.BasePropertySet and
Microsoft.Exchange.WebServices.Data.ItemSchema
thats why I am finding it difficult.
My primary code is:
When I create PropertySet as
follows:
PropertySet properties = new PropertySet(BasePropertySet.FirstClassProperties, ItemSchema.MimeContent);
I get following exception:
The property MimeContent can't be used in FindItem requests.
I dont understand
(Q1) What these ItemSchema and BasePropertySet are
(Q2) And how we are supposed to use them
So I removed ItemSchema.MimeContent:
PropertySet properties = new PropertySet(BasePropertySet.FirstClassProperties);
I wrote simple following code to get all mails in inbox:
ItemView view = new ItemView(50);
view.PropertySet = properties;
FindItemsResults<Item> findResults;
List<EmailMessage> emails = new List<EmailMessage>();
do
findResults = service.FindItems(WellKnownFolderName.Inbox, view);
foreach (var item in findResults.Items)
emails.Add((EmailMessage)item);
Console.WriteLine("Loop");
view.Offset = 50;
while (findResults.MoreAvailable);
Above I kept page size of ItemView to
50, to retrieve no more than 50 mails at a time, and then offsetting it by 50 to get next 50 mails if there are any. However it goes in infinite loop and continuously prints Loop on
console. So I must be understanding pagesize and offset wrong.
I want to understand
(Q3) what pagesize, offset and offsetbasepoint in ItemView constructor
means
(Q4) how they behave and
(Q5) how to use them to retrieve all mails in the inbox
I didnt found any article online nicely explaining these but just giving code samples. Will appreciate question-wise explanation despite it may turn long.

1) With FindItems it will only return a subset of Item properties see
http://msdn.microsoft.com/en-us/library/bb508824(v=exchg.80).aspx for a list and explanation. To get the mime content you need to use a GetItem (or Load) I would suggest you read
http://blogs.msdn.com/b/exchangedev/archive/2010/03/16/loading-properties-for-multiple-items-with-one-call-to-exchange-web-services.aspx which also covers of paging as well.
3) offset is from the base your setting the offset to 50 each time which means your only going to get the 50 items from the offset of 50 which just creates an infinite loop. You should use
view.Offset
= +50;
to increment the Offset although it safer to use
view.Offset += findResults.Items.Count;
which increments the offset based on the result of the last FindItems operation.
5) try something like
ItemView iv = new ItemView(100, 0);
FindItemsResults<Item> firesults = null;
PropertySet psPropSet = new PropertySet(BasePropertySet.IdOnly);
iv.PropertySet = psPropSet;
PropertySet itItemPropSet = new PropertySet(BasePropertySet.IdOnly) { ItemSchema.MimeContent, ItemSchema.Subject, EmailMessageSchema.From };
do
firesults = service.FindItems(WellKnownFolderName.Inbox, iv);
service.LoadPropertiesForItems(firesults.Items, itItemPropSet);
foreach(Item itItem in firesults){
Object MimeContent = null;
if(itItem.TryGetProperty(ItemSchema.MimeContent,out MimeContent)){
Console.WriteLine("Processing : " + itItem.Subject);
iv.Offset += firesults.Items.Count;
} while (firesults.MoreAvailable);
Cheers
Glen
.Offset += fiFitems.Items.Count;

Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.

Hi,
I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
allow "Have full access via EWS to all mailboxes in the organisation".
After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
I passed this token to EWS Java APIs,
it gave me error saying:
microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
I tried similar thing with EWS managed APIs for .net. Got similar error.
Can anyone provide some help and direction to resolve this error.
Thanks & Best Regards,
Pranjal

I see you found an answer with the X-AnchorMailbox header on StackOverflow:
http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none

Entourage for Exchange Web Services Beta

Anyone have any experience with this? And if you do, have you gotten it to work? Our email people have me testing it out and it connects but doesn't pull any mail or let me send anything.
Apple Mail works fine, but I have a lot of clients who like to use Entourage for all the scheduling capabilities.
Thanks!

http://www.microsoft.com/mac/itpros/entourage-ews.mspx
says:
(User must connect to Microsoft Exchange Server 2007 Service Pack 1 with Update Rollup 4 or later. (Caution: If you are using earlier versions of Exchange Server with Entourage, we recommend that you do not install this beta edition of Entourage for Exchange Web Services.)
One has to wonder if that element is missing in your setup.

Web Services API Sample w/ Filters

Does anyone know how to use a Filter in a doOracleSearch call using the Java proxies supplied for the Web Services API? I tried doing this but it appears there is a conflict with Servlet Filter class. When I used the complete path to the class, it compiles, but upon deployment and execution on OC4J I get a symbol not found error. Here is an excerpt of the problem code:
if( query != null && search_type.equals("advanced") )
String str_doc_type = request.getParameter("document_type");
int start = orderByDate ? 1 : startIndex;
int hits = orderByDate ? recencyHits : pageHitCount;
oracle.search.query.webservice.client.Filter[] myfilterArray = null;
oracle.search.query.webservice.client.Filter filterDocType = new oracle.search.query.webservice.client.Filter(112,"string","equals","4918");
myfilterArray[0] = filterDocType;
try
res = ctx.doOracleSearch(
query, // query
new Integer( start ), // start index
new Integer( hits ), // documents requested
Boolean.TRUE, // duplicates removed
Boolean.FALSE, // duplicates marked
groups, // data groups
locale.getLanguage(), // query language
null, // document language
Boolean.TRUE, // return count
null, // filter connector
myfilterArray, // filters
null // fetch attributes
catch( Exception e )
searchException = e;
}

Hi,
I am trying to deploy this sample application. I received the following error:
[oracle@dev1 home]$ /home/oracle/oracle/product/10.1.8/ses1/jdk/jre/bin/java -ja
r /home/oracle/oracle/product/10.1.8/ses1/oc4j/j2ee/home/admin_client.jar deploy
er:oc4j:dev1.psa:5740 oc4jadmin oraidev1 -deploy -file /home/oracle/oracle/produ
ct/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/sample.ear -deploymentName ses
_query -bindAllWebApps http-web-site
08/05/20 11:20:29 Notification ==>Application Deployer for ses_query STARTS.
08/05/20 11:20:29 Notification ==>Copy the archive to /home/oracle/oracle/produc
t/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query.ear
08/05/20 11:20:29 Notification ==>Initialize /home/oracle/oracle/product/10.1.8/
ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query.ear begins...
08/05/20 11:20:29 Notification ==>Unpacking ses_query.ear
08/05/20 11:20:29 Notification ==>Error while unpacking ses_query.ear
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:112)
at java.util.jar.JarFile.<init>(JarFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:92)
at oracle.oc4j.util.FileUtils.unjar(FileUtils.java:309)
at oracle.oc4j.util.FileUtils.autoUnpack(FileUtils.java:488)
at com.evermind.server.deployment.EnterpriseArchive.<init>(EnterpriseArc
hive.java:234)
at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(Applicatio
nDeployer.java:412)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDe
ployer.java:187)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun
(OC4JDeployerRunnable.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(Deplo
yerRunnable.java:81)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:534)
08/05/20 11:20:29 Notification ==>Operation failed with error:
Unable to find/read file META-INF/application.xml in /home/oracle/oracle/product
/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query (META-INF/application.
xml)
Deploy error: Deploy error: Operation failed with error:
Unable to find/read file META-INF/application.xml in /home/oracle/oracle/product
/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query (META-INF/application.
xml)
Please help!!
Thanks!
Regards,
Deva

Using WebCenter Spaces Web Service API through JDeveloper's Data Control

Hi,
I'm trying to access WebCenter Spaces Web Service API (located at http://host:port/webcenter/SpacesWebService)
using JDeveloper's Web Center Data Control.
I created a data control in my portal project using JDeveloper's Web Service Data Control wizard.
I also created and configured key stores (jps-config.xml) at both sides (spaces server and my portal client).
How I created a data control:
* First I entered the name and the URL (http://host:port/webcenter/SpacesWebService?WSDL)
* Then I entered HTTP basic authentication details (user name and password)
* After that I drag-and-drop the getGroupSpaces() method from the data control to a .jspx page as a ADF read-only table.
* Then ran my portal project and navigated to this .jspx page and it worked. List of group spaces appeared well on that page.
The problem is that I got only public group spaces and group spaces created by the user I entered on HTTP basic authentication details.
I makes no sense to enter some static user details in a web service client (or a data control).
So the question is; can I use identity propagation to get only group spaces created by the same user which I logged in my portal?
Edited by: 832886 on Feb 18, 2011 3:09 AM

Hi,
You generally get NameError when you are executing the createCred/updateCred from a incorrect location. Are you using the wlst from oracle_common\common\bin?
Also, In your steps I don't see what you did to populate the walllet at JDeveloper end after your updateCred failed. This is a required step. Use the wlst from the location emntioned above and you should be able to proceed.
Thanks,
Vishal

Process for adding a boolean option to the web service API

Hey guys,
Here's a little background:
I'm currently working on adding an optional "strict" mode to some of the unmarshalling functions in SchemaMarshaller that will throw exceptions when receiving bad data for certain fields, and also improving the date handling while I'm at it (I want null instead of mangled dates when receiving bad data when strict mode is off).
This is for my benefit at the moment as I'm tired of spending time debugging Flex code when XFire and Oracle are spitting out rubbish (like empty xsd:DateTime nodes, DateTimes in xsd:Date nodes, etc) - but I'm sure other people would like to use it too while we don't have a response validator, so I'd like to do it in a way that I can submit as a feature request (with patch) on Jira.
My questions are about the procedure for stuff like this- where should this option be made public in the API, and who would I talk to about it? Or would it be best for it to always be strict? - That's how I'd like it :) Perhaps it should just log errors when it encounters bad data?
This is the first thing I'd like to "add" to the SDK rather than a simple bug-fix, so I just want to do things in a kosher manner. Sorry if I come across like a total noob :)
Cheers,
-Josh
"Therefore, send not to know For whom the bell tolls. It tolls for thee."
:: Josh 'G-Funk' McDonald
:: 0437 221 380 ::
[email protected]

Hey Josh, I'm swamped at the moment but appreciate your interest and your contributions to Flex and WebServices thus far. I'll try and get some time to look into your specific request and what you're hoping to do at the code level, but to answer your question about test cases, you should consider the NIST testsuite for XML Schema datatypes. BlazeDS has historically maintained the WebService implementation, so it appears their test case for NIST based schema tests starts out here (and refers to many data type test cases in the /nist subdirectory). http://opensource.adobe.com/svn/opensource/blazeds/branches/3.0.x/qa/app s/qa-regress/testsuites/flexunit/src/tests/flexunit/xml/NISTXMLSchemaTes t.as Pete ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Josh McDonald Sent: Tuesday, July 08, 2008 8:21 PM To: [email protected] Subject: Re: Process for adding a boolean option to the web service API A new message was posted by Josh McDonald in Developers -- Process for adding a boolean option to the web service API Yeah I knew it'd have to be somewhere outside of SchemaMarshaller, as it's [ExcludeClass] anyway so end users don't see it, nor is it documented in the api docs. Just wasn't sure where it should be. I'll have a think about it some more when I get some down time to work on it, but webservice was where I was thinking it should be too. Didn't think about having it settable on operation as well though, so thanks for that :) Anybody know a good source of valid values for various XSI types (date and DateTime mainly) for testing purposes? Or even who I should contact to get access to that sort of thing? I assume the W3C will take 6 months to answer me, and the answer will be "buy our $10,000 compliance testing suite" or something along those lines. -Josh On Wed, Jul 9, 2008 at 9:46 AM, Matt Chotin <[email protected]> wrote: A new message was posted by Matt Chotin in Developers -- Process for adding a boolean option to the web service API I think for a top-level user option I would put the new option on the mx.rpc.soap.Operation class (I think that's the name). You'd then have that propagate through to the underlying schema classes as they are used. I'd then also add an option to the WebService class itself, and basically in the Operation it should see if it has its own value set and if not check the value on the WebService. We do this for a couple of other flags too I think. End users in general wouldn't look at any classes other than the WebService and maybe the Operation classes, so asking them to set options on the schema classes themselves probably wouldn't work. Matt -- "Therefore, send not to know For whom the bell tolls. It tolls for thee." :: Josh 'G-Funk' McDonald :: 0437 221 380 :: [email protected] ________________________________ View/reply at Process for adding a boolean option to the web service API <a href=http://www.adobeforums.com/webx?13@@.59b5be89/1> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b5be89!folder=.3c060fa3> form to cancel your email subscription.

Mail Connection Failures And EWS (Exchange Web Service) Errors

Hi,
I upgraded from Leopard to Snow Leopard on Friday, and was able to set up my Mail, iCal, and Address Book very quickly and easily. Everything has been working great until today, when I experienced an issue with emails with attachments. The company I work for uses Exchange 2007 hosted on Rackspace.
When sending an email with attachments, I sporadically receive a connection error. This is the same error that I usually get if a server goes offline or I lose my Internet connection - the one where you get the choice to either try again, send later, or use another server to send the email. I will receive this error over and over, and can then send an email with attachments a few minutes later without issue, so it is definitely a sporadic problem. I have not had this issue with emails that did not contain attachments. On at least one occasion, an email with attachments was delivered to the recipient successfully but failed to show up in my Sent Items either in Mail or on the Exchange Server's web mail client.
Rackspace was unable to diagnose the issue, but they have had several reports of the same problem. I looked in the console and saw several errors logged by Mail, all which appeared to happen around the same times that I had the connection failures for the messages with attachments.
8/31/09 1:17:00 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 1:57:06 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:32:14 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x1179aa6f0 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:44:21 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x116c0aa40 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 3:19:59 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:20:36 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:49:26 PM Mail[4279] * Assertion failure in -[EWSDelivery deliverSynchronously], /SourceCache/Message/Message-1075.2/Delivery.subproj/EWSDelivery.m:84
EWSDelivery doesn't have an EWSAccount, got (null) instead
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff875f51e9 -[EWSDelivery deliverSynchronously] + 861
3 Mail 0x000000010007d120 0x0 + 4295479584
4 Mail 0x000000010007cc38 0x0 + 4295478328
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff87506b51 -[MonitoredInvocation invoke] + 214
8 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
9 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
10 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
11 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
12 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
13 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
14 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
15 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 4:00:06 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
Just wanted to report this issue in case this is something that other people are experiencing, and to see if Apple's engineers could look in to it. There is a simple workaround, which is to set up a regular SMTP server as the outgoing mail server for the Exchange account, and to use this instead of the outgoing Exchange server set up by Snow Leopard.
Thanks,
- max

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

Slow attachment upload with Exchange Web Services (Outlook 2011 for Mac?)

We're experiencing slow attachment upload with Exchange Web Services versus MAPI, OWA, and Outlook Anywhere. I'm not totally certain that it is Exchange Web Services or specifically Outlook 2011 for Mac. I attempted to test with the Mac Mail
App, but it makes it difficult to tell when the attachment has been uploaded and the file has been sent. Here's what we're seeing (10mb file):
MAPI / RPC/HTTPS / OWA: 10-15 seconds upload time
Exchange Web Services (Outlook 2011 for Mac): 60-90 seconds upload time
Thoughts? Any idea why we would see such a drastic difference in attachment upload time? Any way to prove definitively that it is Exchange Web Services vs. Outlook 2011 for Mac? We've tried it from multiple locations with multiple different machines,
and although the upload times vary (some locations have more bandwidth etc) the ratios remain similar.

Hi ,
Does all the user occurred the issue ?
If only special user, I recommend you do the following steps and test:
1.Remove and re-add the email account and check if this helps to resolve the issue.
To remove and add the email accounts:
Open Outlook > GO to Tools > Accounts > Click on "Minus" symbol to remove and "Plus" to add an Email account.
2.Creating a new user profile:
http://support.microsoft.com/kb/2439218/
3. If the issue persists, rebuild the data base and check the results:
http://support.microsoft.com/kb/2360509
You can also post it on Office for MAC forum to get special support about the difference between Outlook and Outlook for MAC.
http://www.microsoft.com/mac/support
Wendy Liu
TechNet Community Support

Web Service API v.3 overview

Post Author: yura.tkachenko
CA Forum: Nsite
There are a lot of calls available in Web Service API v.3, here is list of functions:
login (create WS API session which is valid 15,30,60 minutes -
actually depends of company settings). Return back to user generated
unique sessionId, serverUrl (usually you need pass serverUrl as a new
endpoint of WebService). But we are recommend do not use serverUrl better use cookie-based approach (on client side you need to tell your soap stack to maintain cookies).
logoff - finish active session (requires sessionId parameter)queryObject - return EnterpriseObject data (instances). Using that call you can query headers, detail sections, apply pagination for both headers, details. Also you can query such administrative objects: Company (company information - as one user can belong only to one company so at any time you can query only one record), User (list of users settings), Attachment (using that object you can query any attachment assigned with any Enterprise Object). insertObject - add new record to EnterpriseObject, User (only if you are administrator in the company), Attachment (add new attachment)updateObject - edit existing objects: Enterprise Object(headers, details), User (change your profile, edit profile of other users if you are administrator), Company (edit company settings), Attachment (edit attachments).deleteObject - delete : Enterprise Objects or edit Enterprise Objects (deleting row in detail section), Attachment (delete attachments). Nsite doesn't support deleting such entities from system as: User, Company.copyObject - copy exiting Enterprise Object (instance) to another instace with all nested (details, attachments, header fields).describeObject - retrieves full meta description of Enterprise Object (header fields, detail sections, relationships with other EOs). Also this method retrieve description about administrative objects: Company, User, Attachment.describeSystem - retrieves company settings (Company object). You can simulate this call using queryObject operation.getObjectsList - retrieves list of available EnterpriseObjects and administrative objects.getUsersList - retrieves list of company's users.describeUser - retrieves user specific information (User object record). You can simulate this call also using queryObject operation.getCompanyLookups - retrieves available lookups for current company.getLookup - get lookup values and general information about lookup by lookup path. Usually lookup path is assigned to drop-down in Enterprise Object definition. So sometimes very useful to know what values acceptable by EnterpriseObject1 in drop-down1.createLookup - add new lookup to system. This lookup will be available automatically in the Application Designer or others tools.updateLookup - change lookup values etc.uploadAttachment - assign new attachment with "Attachment" component of EO or with "Attach" button (global attachment). This function using DIME attachments - so you need to be sure that your soap stack support this method. You can upload attachments also using insertObject (using Attachment object), but this call work faster for big files.downloadAttachment - download attachment(assigned with "Attachment" component or "Attach" button) using DIME attachments. The same behavior can be reproduce with queryObject call, but this call work faster.describeRouting - get information about any routing in the nSite system. You can get information like: routing status, list of participants, etc.routeEO - start routing mechanism for Enterprise Object.approveEO - approve routing. Current user should be approver.rejectEO - reject routing. Current user should be approver.stopEO - stop routing. Current user should be initiator of routing.We have such limitation of our API:Doesn't support running Business Rules if something was changes in EO instance using calls: insertObject, updateObject, deleteObject.Doesn't support Enterprise Objects which is marked as "version enabled" in Application Designer.Doesn't support forwarding of routings.Doesn't support to modify EnterpriseObject structure (definition).Doesn't support manipulations with Roles Based Access Component.

Post Author: yura.tkachenko
CA Forum: Nsite
Hi, saxotechpm
saxotechpm:
Is there support for inserting an object that has lookup relationships to other objects:
Using the WSAPI I have tried to insert an object that has a lookup relationship to another object for pulling a number of fields.
The insert works if I set the appropriate object id for the linker eo on the lookup button field, however none of the data fields from the linked eo are drawn into the object.
I have also tried running an update with the following syntax. The update works on non linked fields but the linked object data elements are never updated.
The following NEOQLsyntax is used:
update eo_60700 set button_select_contact=721238,button_select_account=721237 where Id=731033;
721238 = an instance of a contact object
721237 = an instance of an account object
731033 = the target instance object being updated - the expectation is that this object would get the data elements linked from the two other instances.
Thanks
Yes, we do support of linked Enterprise Objects in WSAPI for detail sections and for header fields. But due to some internal issues headers are not work properly. But now everything is OK. It has been fixed and it will take some time while you will be able to use it on production. But this fix will be delivered in the nearest patch. So in the October you can use this feature already on production.
Thanks for your request and sorry for any inconveniece.

Difference between EAS(Exchange activesync) and EWS(Exchange web service)

What are the main differrences between EAS(Exchange activesync) and EWS(Exchange web service)...
I know the basic difference
that is EAS(Exchange activesync) is a set of protocol
and EWS(Exchange web service) is a web service....
Please explain me the difference

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

Create Workspace(Library) in domain by OCS Web Service API

Hi,
I am currently using the OCS Web Service API to create a Workspace(Library) in domain level. Here is the code I used:
 DomainManager dm = wsCon.getDomainManager();
 WorkspaceManager wm = wsCon.getWorkspaceManager();
 Item domainItem = dm.getDefaultDomain(null);
 long domainID = domainItem.getId();
 wm.createWorkspace( domainID,
 null,
 new NamedValue[]{
 new NamedValue( Attributes.NAME, "libName"),
 new NamedValue( Attributes.VERSIONING_CONFIGURATION, new NamedValue[]{
 new NamedValue( Attributes.VERSIONING_CONFIGURATION_AUTO_VERSION, new Boolean(true)),
 new NamedValue( Attributes.VERSIONING_CONFIGURATION_AUTO_LABEL, new Boolean(true)),
 new NamedValue( Attributes.VERSIONING_CONFIGURATION_LABEL_TYPE, new Integer(FdkConstants.VERSION_LABELING_DECIMAL)),
 null
However, following exception is caught:
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: ORACLE.FDK.WorkflowError:ORACLE.FDK.WorkflowParameterPromptRequired
faultActor:
faultNode:
faultDetail:
 {http://xmlns.oracle.com/content/ws}fault:<detailedErrorCode xsi:type="xsd:string">ORACLE.FDK.WorkflowParameterPromptRequired</detailedErrorCode><errorCode xsi:type="xsd:string">ORACLE.FDK.WorkflowError</errorCode><exceptionEntries xsi:type="ns1:ArrayOfFdkExceptionEntry" xsi:nil="true"/><info soapenc:arrayType="ns1:NamedValue[1]" xsi:type="soapenc:Array" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"><info xsi:type="ns1:NamedValue"><name xsi:type="xsd:string">ECM.EXCEPTIONINFO.ObjectId</name><value xsi:type="soapenc:long">38465</value></info></info><serverStackTraceId xsi:type="xsd:string"/>
 {http://xml.apache.org/axis/}hostname:pccw-nkvcsp4lrh
ORACLE.FDK.WorkflowError:ORACLE.FDK.WorkflowParameterPromptRequired
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
 at java.lang.Class.newInstance0(Class.java:308)
 at java.lang.Class.newInstance(Class.java:261)
 at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:104)
 at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:90)
 at oracle.ifs.fdk.FdkException.getDeserializer(FdkException.java:270)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at org.apache.axis.encoding.ser.BaseDeserializerFactory.getSpecialized(BaseDeserializerFactory.java:154)
 at org.apache.axis.encoding.ser.BaseDeserializerFactory.getDeserializerAs(BaseDeserializerFactory.java:84)
 at org.apache.axis.encoding.DeserializationContext.getDeserializer(DeserializationContext.java:464)
 at org.apache.axis.encoding.DeserializationContext.getDeserializerForType(DeserializationContext.java:547)
 at org.apache.axis.message.SOAPFaultDetailsBuilder.onStartChild(SOAPFaultDetailsBuilder.java:157)
 at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)
 at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1227)
 at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
 at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
 at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:196)
 at oracle.xml.jaxp.JXSAXParser.parse(JXSAXParser.java:288)
 at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
 at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
 at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
 at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:784)
 at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:143)
 at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
 at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
 at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
 at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
 at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
 at org.apache.axis.client.Call.invoke(Call.java:2748)
 at org.apache.axis.client.Call.invoke(Call.java:2424)
 at org.apache.axis.client.Call.invoke(Call.java:2347)
 at org.apache.axis.client.Call.invoke(Call.java:1804)
 at oracle.ifs.fdk.WorkspaceManagerSoapBindingStub.createWorkspace(WorkspaceManagerSoapBindingStub.java:367)
It seems that the workflow parameters are required to set, but I haven't create any workflow on my DB. Any idea on how to solve this problem?
Thanks and regards,
Tammy

Post Author: yura.tkachenko
CA Forum: Nsite
Hi, saxotechpm
saxotechpm:
Is there support for inserting an object that has lookup relationships to other objects:
Using the WSAPI I have tried to insert an object that has a lookup relationship to another object for pulling a number of fields.
The insert works if I set the appropriate object id for the linker eo on the lookup button field, however none of the data fields from the linked eo are drawn into the object.
I have also tried running an update with the following syntax. The update works on non linked fields but the linked object data elements are never updated.
The following NEOQLsyntax is used:
update eo_60700 set button_select_contact=721238,button_select_account=721237 where Id=731033;
721238 = an instance of a contact object
721237 = an instance of an account object
731033 = the target instance object being updated - the expectation is that this object would get the data elements linked from the two other instances.
Thanks
Yes, we do support of linked Enterprise Objects in WSAPI for detail sections and for header fields. But due to some internal issues headers are not work properly. But now everything is OK. It has been fixed and it will take some time while you will be able to use it on production. But this fix will be delivered in the nearest patch. So in the October you can use this feature already on production.
Thanks for your request and sorry for any inconveniece.

Exchange Web Services API capabilities

Similar Messages

Maybe you are looking for