Exchange Web Services for external O365 users w/UAG

The client has UAG in use, currently, for OWA and EAS for the on-prem mailboxes.
We have O365 Federation enabled right now using ADFS with proxies. ADFS is *not* behind the UAG firewall. sss.clientdomain.com resolves directly to the ADFS proxies. We've successfully tested the SSO redirect.
With UAG in play, how will that affect Exchange Online mailbox users who are trying to get to OWA from their home PC? The UAG proxy is set for pre-auth to the internal AD DS.
Is this going to be a problem for Exchange Online users using OWA and EAS? If so, how do I get around this? My goal is to make sure UAG is as small of a piece of this puzzle as possible, seeing it is nearing end-of-life.

Exchange Online OWA users will likely have to authenticate twice here - once to get to the on-prem Exchange server for OWA through UAG, and then again at the ADFS Proxy, after the on-prem redirection. The alternative would be
to provide Exchange Online users the separate URL, so as to connect directly to Exchange Online, and therefore only getting prompted for authentication once at the ADFS Proxy.

Similar Messages

Slow attachment upload with Exchange Web Services (Outlook 2011 for Mac?)

We're experiencing slow attachment upload with Exchange Web Services versus MAPI, OWA, and Outlook Anywhere. I'm not totally certain that it is Exchange Web Services or specifically Outlook 2011 for Mac. I attempted to test with the Mac Mail
App, but it makes it difficult to tell when the attachment has been uploaded and the file has been sent. Here's what we're seeing (10mb file):
MAPI / RPC/HTTPS / OWA: 10-15 seconds upload time
Exchange Web Services (Outlook 2011 for Mac): 60-90 seconds upload time
Thoughts? Any idea why we would see such a drastic difference in attachment upload time? Any way to prove definitively that it is Exchange Web Services vs. Outlook 2011 for Mac? We've tried it from multiple locations with multiple different machines,
and although the upload times vary (some locations have more bandwidth etc) the ratios remain similar.

Hi ,
Does all the user occurred the issue ?
If only special user, I recommend you do the following steps and test:
1.Remove and re-add the email account and check if this helps to resolve the issue.
To remove and add the email accounts:
Open Outlook > GO to Tools > Accounts > Click on "Minus" symbol to remove and "Plus" to add an Email account.
2.Creating a new user profile:
http://support.microsoft.com/kb/2439218/
3. If the issue persists, rebuild the data base and check the results:
http://support.microsoft.com/kb/2360509
You can also post it on Office for MAC forum to get special support about the difference between Outlook and Outlook for MAC.
http://www.microsoft.com/mac/support
Wendy Liu
TechNet Community Support

How to assign Tasks to other users using Exchange Web Service.

How to assign Tasks to other users using Exchange Web Service.
Any workaround also would help

Hi Glen,
I am trying to use ExtendedPropertyType and put in UpdaterItemType as in this code as below. Although it is not updating the Owner
field.
I have tried it both by Propertyname and PropertyID. Although new custom property's canbe
added but to change an existing one like 'Owner' ? Would this be the right method.
2. And Is ProprertyID a fixed value as 0x811f or does it need to be calculated.
3. Is 'Owner' the right propertname for assigning a task ?
Thanks a lot.
Please see code below for reference.
PathToExtendedFieldType pathExtended = new PathToExtendedFieldType();
//pathExtended.DistinguishedPropertySetId = DistinguishedPropertySetType.PublicStrings;
pathExtended.DistinguishedPropertySetId = DistinguishedPropertySetType.Task;
pathExtended.DistinguishedPropertySetIdSpecified = true;
pathExtended.PropertyId = 0x811f;
pathExtended.PropertyIdSpecified = true;
//pathExtended.PropertyName = "Owner";
pathExtended.PropertyType = MapiPropertyTypeType.String;
ciSetAT.ExtendedProperty = new ExtendedPropertyType[1];
ciSetAT.ExtendedProperty[0] = new ExtendedPropertyType();
ciSetAT.ExtendedProperty[0].ExtendedFieldURI = pathExtended;
ciSetAT.ExtendedProperty[0].Item = "[email protected]";
SetItemFieldType set1 = new SetItemFieldType();
set1.Item = pathExtended;
set1.Item1 = ciSetAT;
UpdateItemType request = new UpdateItemType();
request.ItemChanges = new ItemChangeType[1] { new ItemChangeType() };
request.ItemChanges[0].Item = itemId;
request.ItemChanges[0].Updates = new ItemChangeDescriptionType[2];
request.ItemChanges[0].Updates[0] = setstart;
request.ItemChanges[0].Updates[1] = set1;

OS X Server fills out wrong PayloadType for Exchange Web Services

Hi,
I've noticed a problem with OS X Server, v 3.0.2, when you configure it to setup a user with a Mac OS X Exchange Web Services (EWS) account.
There is a drop down to choose between iOS (for Exchange Active Sync) or OS X (for Exchange Web Services).
If you select EWS and fill out the fields, the generated .mobileconfig file has
PayloadType com.apple.eas.account
followed by your EWS settings.
When you install it on the Mac it also reports it as an iOS setting and does not add the account.
If you manually edit the mobileconfig file, changing PayloadType to
com.apple.ews.account
before trying to load it onto the mac, it accepts the EWS account and you can then see it listed in System Preferences->Internet accounts.
Cheers,
faz_uk.

Hi,
I've noticed a problem with OS X Server, v 3.0.2, when you configure it to setup a user with a Mac OS X Exchange Web Services (EWS) account.
There is a drop down to choose between iOS (for Exchange Active Sync) or OS X (for Exchange Web Services).
If you select EWS and fill out the fields, the generated .mobileconfig file has
PayloadType com.apple.eas.account
followed by your EWS settings.
When you install it on the Mac it also reports it as an iOS setting and does not add the account.
If you manually edit the mobileconfig file, changing PayloadType to
com.apple.ews.account
before trying to load it onto the mac, it accepts the EWS account and you can then see it listed in System Preferences->Internet accounts.
Cheers,
faz_uk.

Entourage for Exchange Web Services Beta

Anyone have any experience with this? And if you do, have you gotten it to work? Our email people have me testing it out and it connects but doesn't pull any mail or let me send anything.
Apple Mail works fine, but I have a lot of clients who like to use Entourage for all the scheduling capabilities.
Thanks!

http://www.microsoft.com/mac/itpros/entourage-ews.mspx
says:
(User must connect to Microsoft Exchange Server 2007 Service Pack 1 with Update Rollup 4 or later. (Caution: If you are using earlier versions of Exchange Server with Entourage, we recommend that you do not install this beta edition of Entourage for Exchange Web Services.)
One has to wonder if that element is missing in your setup.

Create a Web Service for Exchange with form based authentication ?

I want to create a Web Service in Apex that can create appointments in my exchange calendar. Exchange is offering web services for that.
When i try to create the web service reference in Apex i provide the URL and my Exchange login, but it is failing.
The exchange guys told me, that there is a ISA Server running where i need to authenticate through a form.
Does anyone know, how i can implement a webservice in Apex, when the access to the wsdl url needs login through a form ?
Or : what other types of authentication does Apex know ? What possibilities do i have ?
Thanks for answers.
Bernd

Hi
Presume you've already found this information, but in case not ....
Exchange 2007 provides out of the box web services, see
http://msdn.microsoft.com/en-us/library/bb408417.aspx
As a disclaimer - neither myself of the team I work with have tried to use these web services within APEX.
Regards
Chris

Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.

Hi,
I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
allow "Have full access via EWS to all mailboxes in the organisation".
After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
I passed this token to EWS Java APIs,
it gave me error saying:
microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
I tried similar thing with EWS managed APIs for .net. Got similar error.
Can anyone provide some help and direction to resolve this error.
Thanks & Best Regards,
Pranjal

I see you found an answer with the X-AnchorMailbox header on StackOverflow:
http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none

Calling a web service in external system from SRM

Hi folks,
A web service is created in the external system and I need to access this web service from a BADI. Can you tell me how can I call this web service (the external system is giving me a URL) and how I'll get a return. Please let me know in detail.
Thanks,
Prem

Prem,
Hi. You can call the service via HTTP protocol. Pass them values (SET_DATA), and receive a response (GET_DATA), via xml/html.
In your code you would need to create the xml data to pass them, and evaluate the returned xml.
Process...
Data setup
1) Create the XML to send them
Working with the external service
2) Open the HTTP connection
2a) cl_http_client=>create_by_url (IF_HTTP_CLIENT)
2b) lr_client->authenticate
3) Call the to send them the XML
3a) lr_client->request->set_data
3b) lr_client->send
4) Call the lr_client->receive to return the response
5) Close the connection lr_client->close
Data evaluate
6) Evaluation the returned XML and process.
Hope this helps
Cheers
Rob
Code example below.. (There are loads of SAP examples depending on which release you are on).
Process the call to the HTTP client - logic copied from RSHTML01     *
Open IF_HTTP_CLIENT
call method cl_http_client=>create_by_url
    exporting
      url                = l_url
    importing
      client             = lr_client
    exceptions
      argument_not_found = 1
      plugin_not_active = 2
      internal_error     = 3
      others             = 4.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
               with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
      raising oops.
endif.
Authenticate the user
if not g_int_type-usr is initial.
    move: g_int_type-usr      to l_user,
          g_int_type-password to l_password.
    call method lr_client->authenticate
      exporting
        username = l_user
        password = l_password.
endif.
Allow for Cookies
lr_client->propertytype_accept_cookie = lr_client->co_enabled.
Set the server protocol
select single gsval into l_server_protocol
    from z77s0
      where grpid = c_grpid
      and   semid = c_server_protocol.
if sy-subrc eq 0
and not l_server_protocol is initial.
    move l_server_protocol to l_st_server_protocol.
    call method lr_client->request->set_header_field
      exporting
        name = '~server_protocol'
        value = l_st_server_protocol.
endif.
Send out the XML
Set body to XML data
    lr_client->request->set_data( g_xxml ).
    save_xml( i_role = cl_xml_document=>c_role_oreq ).
    l_request_length = xstrlen( g_xxml ).
If Data is sent through then we need certain flags set
    lr_client->request->set_header_field(
                               name = 'Content-Type'
                               value = zcl_tem_bsp=>c_xml_content ).
    call method lr_client->request->set_header_field
      exporting
        name = '~request_method'
        value = 'POST'.
Set length of string to the header fields
    if not l_request_length is initial.
      move l_request_length to l_st_request_length.
      lr_client->request->set_header_field(
                                name = 'content-length'
                                value = l_st_request_length ).
    endif.
Send the request
    call method lr_client->send
      exceptions
        http_communication_failure = 1
        http_invalid_state         = 2
        http_processing_failed     = 3
        http_invalid_timeout       = 4
        others                     = 5.
    check_for_error 'Send'.
Receive the response
    call method lr_client->receive
      exceptions
        http_communication_failure = 1
        http_invalid_state         = 2
        http_processing_failed     = 3
        others                     = 4.
    check_for_error 'Receive'.
Determined returned XML or HTML
    g_xxml = lr_client->response->get_data( ).
Determine the header fields for failure validation
    if lr_client->response->get_header_field( '~status_code' )
          between 200 and 299.
      save_xml( i_role = cl_xml_document=>c_role_ires ).
    else.
      l_status_code =
        lr_client->response->get_header_field( '~status_code' ).
      l_descript_1 =
        lr_client->response->get_header_field( 'error' ).
      l_descript_2 =
        lr_client->response->get_header_field( 'errortext' ).

HTTP connection from OSB web service to external system via a Proxy Server

Dear experts,
May I know has anyone tried to use HTTP protocol to send a request from OSB web service to external system via a proxy server? Heard that we need to establish some sort of tunnel (socket) to talk to Proxy Server. Can you please any have sample code or configuration steps to share?
Thank you very much!!

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
Adding Proxy Servers
Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
2. Select System Administration > Proxy Servers.
3. Click Add.
4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
5. In the Description field, enter a short description for the Proxy Server resource.
6. In the Host-Port Parameters section, enter the following information:
1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
4. Click Add.
You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
These fields are optional, and required only if the Proxy Server is secured.
8. Click Save to create and save the Proxy Server resource in the current session.
9. To end the session and deploy the configuration to the run time, click Activate under Change Center.

Test web service for a function module

Hello,
I have created web service for a functiona module. I can see the same service in SE80 in Enterprise Services.
How do I test this service?
I can see the URL in WSDL tab but when I try to execute it give me following error,
What has happened?
URL http://emhbssap15.domain.local:8027/sap/bc/srt/wsdl/sdef_service_name/wsdl11/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system BDV with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:EMHBSSAP15_BDV_27-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
The URL I am trying is
http://emhbssap15.domainname:8027/sap/bc/srt/wsdl/sdef_servicename/wsdl11/ws_policy/document?sap-client=400
Can anyone help me?
Regards,,,
Sunil Joyous
Edited by: Sunil Joyous on Dec 2, 2009 1:52 PM

Thanks Venu for your input.
Unfortunetly we do not have Java stack on our development system. You said we can test it by SOAP UI tool. Where do I see the WSDL file for the service?
I used WSDL from SE80 --> Service --> WSDL tab, but SOAP UI does not accept this format ?
What are the other ways I can test this web service? I think about SAP PI, importing RFC & creating web service or creating ABAP proxies... Which is the best way to go forward in case you do not have Java stck.
Regards,,,
Sunil Joyous

XI for create web servicies for SAP R/3 4.6C

Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP.
Which is your opinion about this architectural scenario? Is it possible to fulfil the requirement of our business users with a more simple architectural solution (for example with WEB DYNPRO)?
Many thanks in advance for your collaboration.
Regards,
Bob

Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI.
TIBCO is another middleware. So once you expose your R/3 functionalities as web service, you may directly use TIBCO to integrate and XI won't be required at all.
Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly.
WebDynpro application would provide you an easy GUI and could act as Soap client as well to send data.
Regards,
Prateek

Consuming C4C Standard Web Service in External Web System

Hi all,
I am required to consume a standard c4c web service, for eg. Manage Opportunities, in my external web service to trigger the Maintain function to upload an attachment automatically.
So i setup the communication arrangement in my c4c test tenant, downloaded the wsdl, tested it in SoapUI and it is successful.
So my question is, how do i actually consume this web service in my external system using Visual Studio? I have added a Service Reference in my external system and created the proxy class. My problem is how do i actually pass the soap message to the C4C web service? I see the MaintainBundle method requires SAP customized data type to be passed in.
Thanks!
Regards,
Jacob

Hi Jacob,
To consume C4C wsdl into Visual Studio pleas refer this below link
Web 2 Lead Process in SAP Cloud for Customer - Part 2
The above scenario is for custom C4C wsdl and its consume in Visual Studio .NET.
Also for more help go to Help Center and Search for "Web Services"
1) Search for "Web Service and Open it
2) Please select the yellow highlighted part for sample code
3) Sample C# Code to Consume a Service
You can also check this blog :
How to Call SAP Cloud for Customer SOAP API for Account Creation and Query from an External PHP Application
I hope this will helpful to you
Regards,
Mithun

Mail Connection Failures And EWS (Exchange Web Service) Errors

Hi,
I upgraded from Leopard to Snow Leopard on Friday, and was able to set up my Mail, iCal, and Address Book very quickly and easily. Everything has been working great until today, when I experienced an issue with emails with attachments. The company I work for uses Exchange 2007 hosted on Rackspace.
When sending an email with attachments, I sporadically receive a connection error. This is the same error that I usually get if a server goes offline or I lose my Internet connection - the one where you get the choice to either try again, send later, or use another server to send the email. I will receive this error over and over, and can then send an email with attachments a few minutes later without issue, so it is definitely a sporadic problem. I have not had this issue with emails that did not contain attachments. On at least one occasion, an email with attachments was delivered to the recipient successfully but failed to show up in my Sent Items either in Mail or on the Exchange Server's web mail client.
Rackspace was unable to diagnose the issue, but they have had several reports of the same problem. I looked in the console and saw several errors logged by Mail, all which appeared to happen around the same times that I had the connection failures for the messages with attachments.
8/31/09 1:17:00 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 1:57:06 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:32:14 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x1179aa6f0 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:44:21 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x116c0aa40 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 3:19:59 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:20:36 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:49:26 PM Mail[4279] * Assertion failure in -[EWSDelivery deliverSynchronously], /SourceCache/Message/Message-1075.2/Delivery.subproj/EWSDelivery.m:84
EWSDelivery doesn't have an EWSAccount, got (null) instead
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff875f51e9 -[EWSDelivery deliverSynchronously] + 861
3 Mail 0x000000010007d120 0x0 + 4295479584
4 Mail 0x000000010007cc38 0x0 + 4295478328
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff87506b51 -[MonitoredInvocation invoke] + 214
8 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
9 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
10 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
11 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
12 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
13 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
14 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
15 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 4:00:06 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
Just wanted to report this issue in case this is something that other people are experiencing, and to see if Apple's engineers could look in to it. There is a simple workaround, which is to set up a regular SMTP server as the outgoing mail server for the Exchange account, and to use this instead of the outgoing Exchange server set up by Snow Leopard.
Thanks,
- max

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

Configuring Web Services for Oracle XML DB

Hi all...
I think I need some help one this subject....
We have a 10G Release 2 Oracle single instance ( not RAC) install on a Linux Redhat v5.3 64 bit server. Are developers are user Visual Studio .Net and wnat to send xml files to a web service so that the xml file (containing data) can call a PL/SQL package (to be written) which will take the data out of the xml input file and insert rows into a prefined table within the instance. Now they have browsed the web and have come upon the following links...
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb22pro.htm#i1026724
Currently, within the database I looked at the schema XDB and have unlocked the account and connected as the user XDB. There are some 680 objects in the following groups...
SQL> select object_type, count(*) from dba_objects where owner='XDB' group by object_type;
OBJECT_TYPE COUNT(*)
SEQUENCE 2
PROCEDURE 5
OPERATOR 8
LOB 334
LIBRARY 12
PACKAGE 20
PACKAGE BODY 17
XML SCHEMA 25
TYPE BODY 5
TRIGGER 12
TABLE 36
INDEX 51
FUNCTION 5
INDEXTYPE 2
VIEW 2
TYPE 144
16 rows selected.
Now in the links above it mentions that the xdbconfig.xml needs to be altered etc. However, I have searched the entire $ORACLE_HOME and there is no file definition of that description.
From a DBA prospective...what do I have to install on the Linux server? I assume from the Oracle Database 10g Companion Products I need to lay down Oracle HTTP Server in a new Oracle home as the first step...or not? Does the HTML DB need to be installed as well?
And for Configuring Web Services for Oracle XML DB...what else has to be installed? And from what product line?
Thanks in Advance....
Cheers
Roegr

Hi Marco...
First of all ...thanks for the reply.
I followed the link and the infor in that web page. However, there were a few things that did not work....
1. The http://localhost:8080/ as is brought up a web page withe the heading as
==========
ORACLE DATABASE 10g EXPRESS EDITION LICENSE AGREEMENT..
==========
The other browser test ftp://localhost:2100/
did not find any page?
2. Then I went onto running (as the sysdba) the pl/sql to enable the ORAWSV Entry Service
however it error out. So I did a describe on DBMS_XDB and the function deleteServlet does not appear
then I had a look and this link to > http://www.liberidu.com/blog/?p=471
was for 11G and the other link > http://docs.oracle.com/cd/B28359_01/appdev.111/b28369.pdf
was for 11G.
However, we are on 10G
=================
SQL> select * from V$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
==================
So is there must be other sql for 10G?
Cheers
Rog

Sample for Business Objects Web Services for Admin Tasks

Hi,
Anyone has any idea that where can I get a sample using Business Objects Web Services for Admin Tasks like:
- How To Set Security Rights
- How To Manage Categories
- How To Manage User Accounts
- How To Manage User Groups
Thanks,
Harshad

Samples are available at:
https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/e02e0a54-6471-2b10-c99c-d66e07fab102&startindex=21
Check BOSAP notes and other samples page for more info.

Exchange Web Services for external O365 users w/UAG

Similar Messages

Maybe you are looking for