Excise Registers (India) - Level of data display
Hi,
I Need the excise registers ( RG-1 etc.) at the Chapter.Heading.Subheading level. And not at the item level.
Regards
Manish
Edited by: Rui Pereira on May 1, 2009 2:42 PM
Closed
Similar Messages
-
Initial update of Excise Registers (India - CIN)
Hi Team,
Please let's know the process to be followed and the cares to be taken for initial upload of entries into CIN - Excise Registers (from legacy) during data migration at the time of Go-Live. Request you to provide the details of tables as well
Thank you,
Regards,
Ramakrishnahi
OPENING BALANCE
Use following
http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
opening balance for 2 and 1 %
Go to SE11, give table: J_2IACCBAL and choose display F(7).
On Dictionary: Display Table screen, choose Utilities --> Table contents --> Create Entries, from menu bar and make the following entries
Client - Leave it blank
Enter your excise group,
Register: RG23AECS for Edu Cess 2% and
RG23AAT1 for SEC Cess 1%.
CL BAL: enter the closing balace here only and remaining follow the same procedure for entering RG23ABED .
This is only the direct table entry of opening Balance, so you need to make an FI entry thro F-02. For ex.
RG23A ECS Part II Account DR
To Initial balances clearing a/c
Only after this extract the balances thro J2I5 else you may encounter getting wrong extract.
follow the same procedure for RE23C cesses also.
hope it clears
regards
kunal -
Excise Registers updation for the Blcckout period transactions
Dear Friends,
After Going Live how should we update the Excise Registers for the sales happened during Blackout period. Ideally the sales shouldnot happen but it is inevitable.
The cutover strategy planned is to create freshly the sales orders and deliveries for the sales that happened during the Blkout period. But the Excisable registers need to be updated on the same dates the sale happened.
1. Do I need to do the Goods Issue for the deliveries on back dates and update the Registers accordingly?
Is there any other way to cater this?
2. What are all the things to take care specially with the Excise reerence?
Thanks
IsaacCheck these threads
[Initial update of Excise Registers (India - CIN) |Initial update of Excise Registers (India - CIN)]
[updation of cin related registers at the time of cut over|updation of cin related registers at the time of cut over]
thanks
G. Lakshmipathi -
Excise invoice India not displaying in FBL5N
Hi experts,
when checked in VF03 , Excise invoice india generated accounting document with document type SA- g/l account document .
Hence this accounting document related to onlyl G/l accounts ( all line items with g/l accounts ) , it is not appearing in FBL5N .
Can anyone give me the reason why accounting document is generating document type SA - g/l account document.
kindly give me any suggestions.
thanks & regards,
Raghulhi santhosh,
Thanks for your prompt reply.
Actually Excise invoice india is created and entire process is completed.
After creating invoice , when checked invoice through VF03 tcode in display mode .
After clicking accounting overview button on top left , accounting document and profit center document pop window came.
when checked this accounting document in FB03 , this document is OF DOC TYPE SA- G/L ACCOUNTING DOCUMENT ( all g/l account line items , no customer line item ).
Because of this in FBL5N , it is not appearing.
thansk & regards,
Raghul -
Difference between Change Authorization Data / Display Authorization Data
Hello,
My question is wrt to implementation of "principle of treble control" i.e three SAP administrators i.e.
1. Authorization data administrator
2. Authorization profile administrator
3. User Administrator
I have created a role & added a transaction to it e.g. "FAGLL03" or "FF67".
No authorization data is displayed in the authorization tab unless I enter authorization tab with change button and provide inputs for org level field & generate profile. Even when I save the profile with the proposed name, it status still says "No authorization data exists". Since no authorization data is available, administrator 2 is unable to generate profile. If administrator 1 has to generate profile then why is administrator 2 required.
Definition of Administrator 1 is:
The authorization data administrator creates the roles, selects transactions and
maintains the authorization data. He or she simply saves the data in the Profile
Generator since he does not have the necessary authorization for generating the
profile. He or she accepts the proposed profile name T-.... The authorization data
administrator may not change users, nor generate profiles.
Definition of Administrator 2 is:
The authorization profile administrator starts transaction SUPC and chooses All
Roles. He or she then restricts his selection, for example by entering the ID of the
role to be edited. On the next screen, he or she chooses Display Profile to check
the data. If all the data is correct, he or she generates the authorization profile. The
authorization profile administrator may not change users, change the data for roles,
nor generate profiles containing authorization objects beginning with S_USER*.
Thanks.Hasan Saeed Khan wrote:
Actually I started off my question with the "implementation of treble control" that SAP course AD940 suggests.
I had never heard of this treble control and the added value of splitting rolebuilding and profile generation doesn't make much sense to me but that's my personal opinion.
On the technical side of things: in your first post you state "No authorization data is displayed in the authorization tab unless I enter authorization tab with change button and provide inputs for org level field & generate profile."
It is also possible to change the data and save this but not generate the profile yet. I just tried this by doing the following:
Create role
Add transactions to menu
Edit profile, org levels & authroization data.
Hit 'save'.
Accept proposed profile name.
Go back to PFCG main screen and ignore message of profile not being generated. (Click 'continue')
And this leaves me with a role with yellow traffic light on the authorization tab an the profile status is: "Current version not generated"
So it should be possible to maintain roles and profiles separately. -
Infotype data display only authorization in PA30
Hello Friends,
I want to give infotype data display only authorization in Employee Master (PA30) to some of my colleagues. I used object P_Origin for the same but it is not working as it has both create and change access. Can anyone suggest how to tacle the issue in details.
Thanks in advance,
AnandHi
HR Master Data Authorisations.
Object P_ORGIN
INFTY : Infotype No.
SUBTY:Subtype No.
AUTHC:Authorisation Level
PERSA:Personnel Area
PERSG:Emp Group
PERSK:Emp Sub Group
VDSK1:Organizational Key
Ex P_ORGIN :
INFTY : 0014
SUBTY:M120
AUTHC:R
PERSA:DE01
PERSG: 1
PERSK: *
VDSK1: *
R - Read Authorisation.
Manoj Shakya -
Dump when run J2I5 - Excise Registers Extraction
Hi,
When we run the J2I5 - Excise Registers Extraction (with Register RG23D), it is giving the run time error The ABAP/4 Open SQL array insert results in duplicate database records.
This error is showing after 04.08.2009 to till date..But before till 03.08.2009, it is working file...
What should be the problem????Hi,
Check notes:
965938 J2I5 extraction gives a dump for RG23D
957105 Short Dump while extracting RG23D register in J2I5
842079 Additional changes to NCCD,ECS - J2I5
1087108 RG23D:Short dump and timeout error in j2i6.
1094202 DUMP while cancelling the download of register RG23D in 46C
Regards,
Eli -
SE16 data display and authorizations.
Hi Experts,
I had few following questions regarding data display and authorization using SE16 :-
As example, SAP HCM solution for an enterprise is implemented in say 10 countries :-
- Is it that using SE16 the user has the authorization to display all data, including the data for different countries employee's?
- isn't the infotype data based on the country grouping settiings and shouldn't be displayed via SE16?
- Can the authorization be controlled, using User group or some roles being assigned while creating the user id?
Thank you for your help in advance.
Thanks and Regards,
Puneet LuthraPuneet,
If you assign SE16 tcode to a profile you can set further authorization object S_TABU_DIS - here you can set authorization groups such as PA for HR intptype tables and SC for PD infotype tables,
I do not believe that you can actually set infotype level access. i.e if you give pa tables then thay can see all pa tables you cannot restrict to just say, 0001 and 0007. This is independent of the P_ORGIN authorizations, so even if you restrict a certain infotype in P_ORGIN, they will be able to see using SE16.
One of the ways in which we have got around it in the past is to just create custom transctaions for each table they want to see, such as zse16_pa0001 and assign individual tables to those who need it. Only HR experts and Support users need this kind of access in the production system so it should be relatively easy to maintain individually.
Hope this helps. -
My Macbook Pro has been having slowness problems, and I just noticed some folders have unusual date displays: 2014 M04 17:50.
I have never seen the M, which must mean month before yesterday. Anybody have some light to shine on this?
I have run MacScan for tracking cookies and spyware- found 2 Safari tracking cookies, but nothing else. Also ran Adwaremedic- nothing found.Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
Data display grid font selection
Does anyone know how to change the font that's used on the "Data" tab when displaying the content of rows in a table?
I'm trying to view chinese characters which are stored in UTF-8 unicode in the database. I have all the necessary fonts loaded on my machine and the correct NLS_LANG settings.
I can see western characters, arabic, russian, greek OK in the data-grid, but not chinese or other far-eastern languages. Instead I see little squares instead of the symbols.
I've checked for font setting in Tools -> Preferences but the only setting I can find is under the "Code Editor" section. This is set correctly (to Arial Unicode MS) and if I copy the "little squares" from the data grid and paste them into a code-edit tab I see the characters correctly displayed.
So it seems that the "Font" setting for the code-edit tabs isn't used by the data-display tabs.
Is there a way of making both code-editor window and data-display tab use the same font?i would create a standard report.
i presume the air pressure and humidity are from one field? if not create a formula to display that.
create groups
1- a/p humidity field or formula
2- time
3- ref-measure- error
not sure if they are the same field or different.
you can then place your data in the groups (formulas calcs etc)
then underlay the groups so they appear on the same line
then draw boxes around them.
hope this helps -
Opening balances for excise registers
Hi
What would be the process for updation of excise registers with opening balance. The transfer is from Legacy to SAP
Regards
Sanilhi....
I could find register for BED & AED...
which register to be used for Education cess & Higher Education cess....
we have 4 different G/L accounts for BED, AED, ECess & HECess... how to upload values in individual G/L accounts....
regards,
Anand -
Hi Guru's
I've created a generic ds using fm for direct access.creating virtual cube and mapped accordingluy with ds.
Now when I do test extract on ds per a single posting day then it takes few secords to pull through the data and the no. of records are 45 on dev box.But I do data display on remote cub and it takes long and throughing a timed out error.
I dont have any routines on transformaions.
What could be the problem?
Nagesh.HI
here's the code in FM
Example: DataSource for table SFLIGHT
TABLES: BKPF,BSEG.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
S_COUNTER_DATAPAKID LIKE SY-TABIX,
Starting point for each data package
READ_NEXT LIKE SY-TABIX,
Total Number of Extracted Records
NO_RECS LIKE SY-TABIX,
Number read so far
TEMP_CNTR(9) TYPE N.
cursor
S_CURSOR TYPE CURSOR.
Select ranges
RANGES: R_BLDAT FOR BKPF-BLDAT,
R_BUDAT FOR BKPF-BUDAT,
R_CPUDT FOR BKPF-CPUDT,
R_BUKRS FOR BKPF-BUKRS,
R_GJAHR FOR BKPF-GJAHR,
R_BELNR FOR BKPF-BELNR.
DATA: GT_T_DATA LIKE ZFI_GL_4 OCCURS 0 WITH HEADER LINE.
DATA: GT_BKPF TYPE TABLE OF BKPF,
GS_BKPF TYPE BKPF.
DATA: COUNTER(9) TYPE N.
DATA: LV_MONAT(3).
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZFI_GL_4'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BLDAT'.
MOVE-CORRESPONDING L_S_SELECT TO r_bldat.
APPEND R_BLDAT.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
APPEND R_BUDAT.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CPUDT'.
MOVE-CORRESPONDING L_S_SELECT TO R_CPUDT.
APPEND R_CPUDT.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
APPEND R_BUKRS.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
APPEND R_GJAHR.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BELNR'.
MOVE-CORRESPONDING L_S_SELECT TO R_BELNR.
APPEND R_BELNR.
ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
SELECT * FROM BKPF INTO TABLE GT_BKPF WHERE BLDAT IN R_BLDAT
AND BUDAT IN R_BUDAT
AND CPUDT IN R_CPUDT
AND BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BELNR IN R_BELNR.
LOOP AT GT_BKPF INTO GS_BKPF.
SELECT * FROM BSEG WHERE BELNR = GS_BKPF-BELNR
AND BUKRS = GS_BKPF-BUKRS
AND GJAHR = GS_BKPF-GJAHR.
MOVE-CORRESPONDING GS_BKPF TO GT_T_DATA.
MOVE-CORRESPONDING BSEG TO GT_T_DATA.
CLEAR LV_MONAT.
CONCATENATE '0' GT_T_DATA-MONAT INTO LV_MONAT.
CONCATENATE GT_T_DATA-GJAHR LV_MONAT INTO GT_T_DATA-FISCPER.
CALL FUNCTION 'BWFIU_GET_DOCUMENT_ORIGIN'
EXPORTING
I_AWTYP = GT_T_DATA-AWTYP
I_AWKEY = GT_T_DATA-AWKEY
IMPORTING
E_REFBELNR = GT_T_DATA-AWREF
E_REFGJAHR = GT_T_DATA-AWGJA
E_REFBUKRS = GT_T_DATA-AWBUK
E_REFKOKRS = GT_T_DATA-AWKOK.
Lcal currency calculations.
IF GT_T_DATA-SHKZG EQ 'S'.
GT_T_DATA-DMSOL = GT_T_DATA-DMBTR.
GT_T_DATA-DMSHB = GT_T_DATA-DMBTR.
GT_T_DATA-DMHAB = 0.
ELSEIF GT_T_DATA-SHKZG EQ 'H'.
GT_T_DATA-DMHAB = GT_T_DATA-DMBTR.
GT_T_DATA-DMSHB = GT_T_DATA-DMBTR * -1.
GT_T_DATA-DMSOL = 0.
ENDIF.
Foriegn Currency calculations.
IF GT_T_DATA-SHKZG EQ 'S'.
GT_T_DATA-WRSOL = GT_T_DATA-DMBTR.
GT_T_DATA-WRSHB = GT_T_DATA-DMBTR.
GT_T_DATA-WRHAB = 0.
ELSEIF GT_T_DATA-SHKZG EQ 'H'.
GT_T_DATA-WRHAB = GT_T_DATA-DMBTR.
GT_T_DATA-WRSHB = GT_T_DATA-DMBTR * -1.
GT_T_DATA-WRSOL = 0.
ENDIF.
APPEND GT_T_DATA.
ENDSELECT.
ENDLOOP.
DESCRIBE TABLE GT_T_DATA LINES NO_RECS.
READ_NEXT = 0.
TEMP_CNTR = 0.
ENDIF. "First data package ?
Fetch records into interface table.
IF ( READ_NEXT GT NO_RECS ) OR ( NO_RECS EQ 0 ).
REFRESH GT_T_DATA.
CLEAR:S_COUNTER_DATAPAKID, COUNTER, READ_NEXT, S_S_IF, NO_RECS.
RAISE NO_MORE_DATA.
ENDIF.
COUNTER = 0.
LOOP AT GT_T_DATA FROM READ_NEXT.
COUNTER = COUNTER + 1.
IF COUNTER GT S_S_IF-MAXSIZE.
IF TEMP_CNTR EQ NO_RECS.
CLEAR: S_COUNTER_DATAPAKID,COUNTER,READ_NEXT,S_S_IF,NO_RECS.
RAISE NO_MORE_DATA.
ELSE.
READ_NEXT = READ_NEXT + COUNTER.
ENDIF.
EXIT.
ENDIF.
MOVE-CORRESPONDING GT_T_DATA TO E_T_DATA.
APPEND E_T_DATA.
TEMP_CNTR = TEMP_CNTR + 1.
iF TEMP_CNTR GT NO_RECS.
CLEAR GT_T_DATA.
CLEAR: S_COUNTER_DATAPAKID, COUNTER,READ_NEXT, S_S_IF,NO_RECS.
RAISE NO_MORE_DATA.
EXIT.
ENDIF.
ENDLOOP.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
If it's a code then why it's quick on rsa3?
Nagesh. -
Create Delivery, Billing and Excise Invoice no. in back date.
Dear all,
i got sum problem with no. range in export excise invoicing,
therefore to avoid this i created export invoice thru' legacy system, now i want to create the same export order in sap system
how i create export order in back date as actual excise date lies in back date.
what certain changes i have to made in sap system in order to create Delivery, Billing and Excise Invoice no. in back date.
Plz suggest
GauravBack date means how many months should be predated ?? You should be aware, you can post a document in SAP one month prior to current month but not before that. For example, now we are in August and you can post a document for July and not for June'10.
Apart from this, you need to have back dated stock in SAP to invoice and the periods (MM & FI) should be open for previous month.
Dear Sir,
Back dates means 14 days back and in the same month August.
plz , explain what is back dated stock to invoice SAP
Gaurav -
Feature Request: Better dimensional meta data displayed
Aside from every other problem with how Bridge lets the user display, sort and interact with meta data (aside from the actual metadata palette), it would be way more useful to have the Dimension meta data displayed under an image shown in 'real world' dimensions.
For example: I'm looking at my 'final images' that have been converted to CMYK, and sized for delivery. At this point Pixel Dimensions are pretty useless. What I really want to do is quickly scan my images, seeing Inches (or CM) with a PPI. My clients never ask for pixel dimensions (unless we are talking about the web, which we aren't) - they ask for 8.76" x 5.34" at 266ppi. It would just be nice to use bridge to double check the image sizes before delivery.
thks
andyThanks for you feedback. You wish has been granted (dimensions can now be displayed in pixels, inches or centimeters. Go to Preferences > Thumbnails to select which dimension to display below the thumbnail, or Preferences > Metadata to customize the metadata pane). Check out the free beta of Bridge CS3 (http://labs.adobe.com/technologies/photoshopcs3/)
Cheers,
Arno.
Bridge Engineering Manager, Adobe. -
How to fetch the data & display the data if fields got the same name in alv
hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal
Maybe you are looking for
-
I'm using a micro sd card inside USB adapter but it won't mount on my Macbook Air 2012
Hi everyone, Really puzzled at the moment because I just purchased a Kingston 64GB Class 10 Micro SD card and it came with a USB adapter to plug into my mac. The problem is that it won't mount, I just get a pop up saying "The disk you inserted was no
-
[Windows user] I have an ipod touch 5th generation 64gb and I can't backup my ipod. I have restored it many times, even in recovery mode, but it still comes up with "iTunes can't backup this ipod because the session has failed," yet it was still plug
-
Lost all contacts after iOS 4.3 update [iPhone 4]
The description above pretty much tells it all. All contacts missing from iPhone 4 after update to iOS 4.3. All music, calendar, photos, voicemails are still there. And the strange thing (to me) is that the numbers are still there under "recent" and
-
Hi Everyone. i have a signle column in a source for name field but i in target table i define three column for name(first name, middle name and last name). how i will map one source column to these three target column. Similary if i want to join two
-
what is macs software????