Exe behaves inconsistently with input data into a cluster
I'm on Labview 2011, SP1, so this may have been updated, but here's a quirk I discovered.
I was reading a network shared variable on a remote machine (with 7 integers) into a labview built app (exe) and passing those integers to a cluster used for control. Sometimes it worked, sometimes it didn't, so I figured I didn't understand shared variable enough (even though I had used them in the same situation many times).
I switched to writing a file on that remote system, then reading that info into the same cluster. Sometimes it worked, sometimes it didn't. Tried all kinds of tricks, but any time there was a direct connection between that variable input data and the cluster, it was inconsistent.
Turns out that the problem seemed to be the exe halting without error upon bundling the data into the cluster, but not every time.
So what finally got around the problem was writing the integers to a duplicate cluster, then using a local variable of that cluster to bundle those values into the controlling cluster.
Once the path between network passed input data and controlling cluster was "double blind" to the application builder, the problem was gone.
In case it makes some difference, the controlling cluster originated as a user control.
Do you have a simple example that demonstrates the problem. I would like to test it on later versions.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Similar Messages
-
How to input data into a table with columns?
I am trying to input data into a table. My table have 5 columns and an unlimited amount of rows. I created a program in LabView that enters the data into the table but it enters all of the data in one row. I would like to enter the first set of information into the first column, the second set of info into the second column and so on. I am including a copy of the program that I am working with. I would like the number of runs to be put into the first column (it should count down like number 5 in first row, number 4 in second row, number 3 in third row, and so on). I would like the applied voltage to be placed in the second column, and so on. Any help or information will be greatly appreciated. I am working with LabView Version 6.1 and 8.0. I am submitting the vi from 6.1.
Attachments:
FJ-PROGRAM.vi 68 KBPondered,
I looked at your code and I think you might be making things too complicated. I've included a very simple example that demonstrates how to write a 2D array of integers to a table. Hope you find this helpful. It is in LV 7.1.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect
Attachments:
rows - columns.vi 17 KB -
I have manually inputted data into a blank spreadsheet and would like to use a form to enter data into that sheet !!! How do I do that please
Leigh,
After creating your table, Tap the Tab marked "+" and select "Form" - you will be asked which table to use. (You should get into the habit of naming your tables - if the table name isn't visible, select the table and tap the Styles (Brush) Menu > Table > Turn ON table Name, then double tap on the Table to edit it.)
Select the table you wish to to fill with a form and you will see a new form based on the header data.
The form will allow you to add one row at a time and when you get to the last row, there is an option at the bottom of the form to add a new row using the "+" button. At the top of the form is the row header which you can rename by double tapping.
You can also rename the form on the Tab by double tapping on the name.
Try it out. -
Input data into dynamic calc in Planning forms
Hi guys,
Have someone tried to combine these two requirements:
1. to have upper level members dynamic calc
2. to give users the ability to input data into those upper level members through Planning forms.
I need to do that in order to pass inputted values into HBR, and allocate those values to the leaf level across multiple dimensions. I need those members dynamic calc because otherwise I would need to aggregate data across 7 dimensions and that takes too long. Those allocations are suposed to happen constantly and are the main purpose of application.
I know you can have dummy stored members that correspond the uper level dynamic members, but then the user will have input forms without current data and will be required to check reports/forms with dynamic calc members prior to updating data.
I wonder if it is a realistic task to change jsp files that generate those forms, so that data can be inputed into the form, but instead of passing it to Essbase cube to send it to relational database.
P.S.
This is related to the thread I opened about optimizing recalculation time:
Recalculatiion takes much longer than initial calculation
I received a lot of valuable advices that would definitely work in other situations, but in my case they seem to contradict either user concurrent access or performance requirements.
Thanks a lot!
DmitryHi Glenn,
I think i found a workaround for this, or may be i am missing something. I will replicate my hierarchies so that one hierarchy will have uper level stored members, and another dynamic calc. Once user loads the form it will run on-load script that will copy data from corresponding dynamic calc to stored slice. The updated data will be alocated to the leaf level, but will never be aggregated. Since reporting is done from ASO cube i only care about the leaf level and current selection in the form.
Thanks! -
1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard. -
How to input data into Pdf file
I am not too sure if I am posting my question in the right forum.
I would like to know what version of Adobe acrobat can allow me to create a document, where clients can input data into it?
Here is an online example
http://www.uscis.gov/files/form/N-400.pdf
Thanks.
OceansIf your users will be using Reader and you want your users to be able to save the form or email it, you will need to apply 'Extended Form Rights' (version 8 Provessional or Version 9 Standard or better) and for signatures you will need to apply 'Signature Rights' using an Adobe server product.
-
Problem with input data format - not "only" XML
Hi Experts,
I have problem with input data format.
I get some data from JMS ( MQSeries) , but input format is not clear XML.
This is some like flat file with content of XMLu2026.
Example:
0000084202008-11-0511:37<?xml version="1.0" encoding="UTF-8"?>
<Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
...content....
</Document>000016750
Problems in this file is :
1. data before parser <? xml version="1.0"> -> 0000084202008-11-0511:37
2. data after last parser </Document> -> 000016750
This data destroy XML format.
Unfortunately XI is not one receiver of this files and we canu2019t change this file format in queue MQSeries ( before go to XI) .
My goal is to get XML from this file:
<?xml version="1.0" encoding="UTF-8"?>
<Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
...content....
</Document>
My questions:
1. Is any way or technique to delete this data 0000084202008-11-0511:37 in XI from this file ?
2. Is any way to get only XML from this file ?
Thanx .
Regards,
SeoHi Buddy
What is the XI adapter using?
If you use inbound File adapter content conversion you could replace these values with none and then pass it to the scenario.
Does that help?
Regards
cK -
How to input data into an arraylist from a text file?
I am trying to take data from a text file and put that data into an arraylist. First here is the text file:
[item1, 10, 125.0, item2, 10, 12.0, item3, 20, 158.0]
3
4530.0
[item5, 65, 555.5, item4, 29, 689.0]
2
56088.5
[item7, 84, 34.5, item6, 103, 0.5, item8, 85, 1.36]
3
3065.1The text between the [ ] is the output from my arraylists. I have three arraylists. The first [ ] belongs to arraylist A, the second to arraylist B, and the third to arraylist C. The format of the arraylists is this:
<item name>,<# in stock>,<value of one item>
The first number below the arraylists in the text file represents the number of items in the list. The second number below the arraylists represents the total value of the items in the arraylists.
Here is the class file I have (yes, it does everything):
import java.io.*;
import java.util.Scanner;
import java.util.ArrayList;
public class Inventory extends Object
public int toAdd = 0;
private boolean done = false; //Are we done yet?
public String strItemName; //The name of the item type.
public int intNumInStock; //The number in stock of that type.
public double dblValueOfOneItem; //The value of one item.
public String strNumberInStock;
public double dblTotalValueA; //The total value of warehouse A.
public double dblTotalValueB; //The total value of warehouse B.
public double dblTotalValueC; //The total value of warehouse C.
public int intWarehouseAItemCount; //Counter for items in warehouse A.
public int intWarehouseBItemCount; //Counter for items in warehouse B.
public int intWarehouseCItemCount; //Counter for items in warehouse C.
ArrayList warehouseAList = new ArrayList(); //Create the Warehouse A ArrayList.
ArrayList warehouseBList = new ArrayList(); //Create the Warehouse B arrayList.
ArrayList warehouseCList = new ArrayList(); //Create the Warehouse C arrayList.
/** Construct a new Inventory object. */
public Inventory()
super();
/**Add items to the Warehouse A ArrayList.*/
private void createWareHouseA()
System.out.println("!" + toAdd + " item types will be added to warehouse A.");
//Cast
String strNumInStock = Integer.toString(intNumInStock);
String strValueOfOneItem = Double.toString(dblValueOfOneItem);
this.strNumberInStock = strNumInStock;
System.out.println("!Initial size of warehouseAList : " +
warehouseAList.size());
//Add items to the array List
warehouseAList.add(this.strItemName);
warehouseAList.add(this.strNumberInStock);
warehouseAList.add(this.dblValueOfOneItem);
System.out.println("!size of arrayList after additions " + warehouseAList.size());
/**Add items to the Warehouse B ArrayList.*/
private void createWareHouseB()
System.out.println("!" + toAdd + " item types will be added to warehouse B.");
//Cast
String strNumInStock = Integer.toString(intNumInStock);
String strValueOfOneItem = Double.toString(dblValueOfOneItem);
this.strNumberInStock = strNumInStock;
System.out.println("!Initial size of warehouseBList : " +
warehouseBList.size());
//Add items to the array List
warehouseBList.add(this.strItemName);
warehouseBList.add(this.strNumberInStock);
warehouseBList.add(this.dblValueOfOneItem);
System.out.println("!size of arrayList after additions " + warehouseBList.size());
/**Add items to the Warehouse C ArrayList.*/
private void createWareHouseC()
System.out.println("!" + toAdd + " item types will be added to warehouse C.");
//Cast
String strNumInStock = Integer.toString(intNumInStock);
String strValueOfOneItem = Double.toString(dblValueOfOneItem);
this.strNumberInStock = strNumInStock;
System.out.println("!Initial size of warehouseCList : " +
warehouseCList.size());
//Add items to the array List
warehouseCList.add(this.strItemName);
warehouseCList.add(this.strNumberInStock);
warehouseCList.add(this.dblValueOfOneItem);
System.out.println("!size of arrayList after additions " + warehouseCList.size());
/**Interpret the commands entered by the user.*/
public void cmdInterpreter()
this.displayHelp();
Scanner cin = new Scanner(System.in);
while (!this.done)
System.out.print(">");
//"line" equals the next line of input.
String line = cin.nextLine();
this.executeCmd(line);
/**Execute one line entered by the user.
* @param cmdLN; The command entered by the user to execute. */
private void executeCmd(String cmdLN)
Scanner line = new Scanner(cmdLN);
if (line.hasNext())
String cmd = line.next();
//What to do when users enter the various commands below.
if (cmd.equals("help"))
this.displayHelp();
else if (cmd.equals("Q!"))
this.done = true;
else if (cmd.equals("F") && line.hasNext())
this.inputFromFile(line.next());
else if (cmd.equals("K") && line.hasNext())
int numItemsToAdd = Integer.valueOf( line.next() ).intValue();
this.toAdd = numItemsToAdd;
this.inputFromKeyboard(numItemsToAdd);
/**What to do if input comes from a file.
* @param inputFile; The name of the input file to process.*/
private void inputFromFile(String inputFile)
Scanner cin = new Scanner(System.in);
System.out.println("!Using input file " + inputFile + ".");
System.out.print("!Enter the name of the output file: ");
String outputFile = cin.next();
System.out.println("!Using output file " + outputFile + ".");
try
BufferedReader in = new BufferedReader(new FileReader(inputFile));
//Scanner in = new Scanner(new File(inputFile));
//Initialize the String variables.
String line1 = null;
String line2 = null;
String line3 = null;
String line4 = null;
String line5 = null;
String line6 = null;
String line7 = null;
String line8 = null;
String line9 = null;
System.out.println(in.equals(",") + " see?");
//System.out.println((char)(char)in.read() + " experiment");
/**This loop assigns values to the string variables based on the
* values on each line in the input file. */
while(in.readLine() != null)
line1 = in.readLine();
line2 = in.readLine();
line3 = in.readLine();
line4 = in.readLine();
line5 = in.readLine();
line6 = in.readLine();
line7 = in.readLine();
line8 = in.readLine();
line9 = in.readLine();
//Print the contents of each line in the input file.
System.out.println("!value of line 1: " + line1);
System.out.println("!value of line 2: " + line2);
System.out.println("!value of line 3: " + line3);
System.out.println("!value of line 4: " + line4);
System.out.println("!value of line 5: " + line5);
System.out.println("!value of line 6: " + line6);
System.out.println("!value of line 7: " + line7);
System.out.println("!value of line 8: " + line8);
System.out.println("!value of line 9: " + line9);
/**Add items to the warehouses.*/
warehouseAList.add(line1);
warehouseBList.add(line4);
warehouseCList.add(line7);
/**Add the item count and total value for warehouse A.*/
int intLine2 = Integer.valueOf(line2).intValue();
this.intWarehouseAItemCount = intLine2;
double dblLine3 = Double.valueOf(line3).doubleValue();
this.dblTotalValueA = dblLine3;
/**Add the item count and total value for warehouse B.*/
int intLine5 = Integer.valueOf(line5).intValue();
this.intWarehouseBItemCount = intLine5;
double dblLine6 = Double.valueOf(line6).doubleValue();
this.dblTotalValueB = dblLine6;
/**Add the item count and total value for warehouse C.*/
int intLine8 = Integer.valueOf(line8).intValue();
this.intWarehouseCItemCount = intLine8;
double dblLine9 = Double.valueOf(line9).doubleValue();
this.dblTotalValueC = dblLine9;
/**Ask the user how many items to add or delete from inventory.*/
System.out.print("Enter the number to add to inventory for " +
warehouseAList.get(0) + ":");
String toAddOrDel = cin.next();
/**Print the contents of all the warehouses. */
System.out.println(" ");
//Print the contents of warehouse A.
System.out.println("!--------------------------------");
System.out.println("!----------Warehouse A:----------");
System.out.println("!--------------------------------");
//Print the item list for warehouse A.
System.out.println(warehouseAList);
//Print the total amount of items in warehouse A.
System.out.println("Total items: " + this.intWarehouseAItemCount);
//Print the total value of the items in warehouse A.
System.out.println("Total value: " + this.dblTotalValueA);
System.out.println("!--------------------------------");
System.out.println("!----------Warehouse B:----------");
System.out.println("!--------------------------------");
//Print the item list for warehouse B.
System.out.println("!warehouseB: " + warehouseBList);
//Print the total amount of items in warehouse B.
System.out.println("Total items: " + this.intWarehouseBItemCount);
//Print the total value of the items in warehouse B.
System.out.println("Total value: " + this.dblTotalValueB);
System.out.println("!--------------------------------");
System.out.println("!----------Warehouse C:----------");
System.out.println("!--------------------------------");
//Print the item list for warehouse C.
System.out.println("!warehouseC: " + warehouseCList);
//Print the total amount of items in warehouse C.
System.out.println("Total items: " + this.intWarehouseCItemCount);
//Print the total value of the items in warehouse C.
System.out.println("Total value: " + this.dblTotalValueC);
in.close();
catch (FileNotFoundException e)
System.out.println("!Error: Unable to open file for reading.");
catch (EOFException e)
System.out.println("!Error: EOF encountered, file may be corrupted.");
catch (IOException e)
System.out.println("!Error: Cannot read from file.");
/**What to do if input comes from the keyboard.
* @param numItems; The total number of items that will be added to the
* Warehouse(s). */
public void inputFromKeyboard(int numItems)
System.out.println("!You will be adding " + numItems + " items to " +
"inventory from the keyboard. ");
this.toAdd = numItems;
Scanner cin = new Scanner(System.in);
//Prompt user for name of output file.
System.out.print("!Enter the name of the output file: ");
String outputFile = cin.next();
/**This loop asks the user for information about the item(s) and inputs
*them into the appropriate array.*/
int count = 0;
while (numItems > count)
//Item name.
System.out.print("!Item name: ");
String addItemName = cin.next();
//Number in stock.
System.out.print("!Number in stock: ");
String addNumInStock = cin.next();
//Initial warehouse.
System.out.print("!Initial warehouse(A,B,C): ");
String addInitWarehouse = cin.next();
//Value of one item.
System.out.print("!Value of one item: ");
String addValueOfOneItem = cin.next();
//Add or delete from inventory
System.out.print("!Enter amount to add or delete from inventory: ");
String strAddOrDelete = cin.next();
System.out.println("!Amount to add or delete: " + strAddOrDelete);
//Cast
int intAddNumInStock = Integer.valueOf(addNumInStock).intValue();
double doubleAddValueOfOneItem = Double.valueOf(addValueOfOneItem).doubleValue();
int intAddOrDelete = Integer.valueOf(strAddOrDelete).intValue();
/**Add intAddNumInStock with intAddOrDelete to determine the amount
* to add or delete from inventory (If a user wishes to remove items
* from inventory simply add negative values). */
intAddNumInStock = intAddNumInStock + intAddOrDelete;
System.out.println("!Inventory after modifications: " + strAddOrDelete);
this.strItemName = addItemName;
this.intNumInStock = intAddNumInStock;
this.dblValueOfOneItem = doubleAddValueOfOneItem;
//Put items into warehouse A if appropriate.
if (intAddNumInStock < 25)
//Increment the warehouse A item count.
this.intWarehouseAItemCount = this.intWarehouseAItemCount + 1;
//Calculate the total value of warehouse A.
this.dblTotalValueA = this.dblTotalValueA + intAddNumInStock * doubleAddValueOfOneItem;
//Create the warehouse A array list.
this.createWareHouseA();
//Put items into warehouse B if appropriate.
if (intAddNumInStock >= 25)
if (intAddNumInStock < 75)
//Increment the warehouse B item count.
this.intWarehouseBItemCount = this.intWarehouseBItemCount + 1;
//Calculate the total value of warehouse B.
this.dblTotalValueB = this.dblTotalValueB + intAddNumInStock * doubleAddValueOfOneItem;
//Create the warehouse B array list.
this.createWareHouseB();
//Put items into warehouse C if appropriate.
if (intAddNumInStock >= 75)
//Increment the warehouse C item count.
this.intWarehouseCItemCount = this.intWarehouseCItemCount + 1;
//Calculate the total value of warehouse C.
this.dblTotalValueC = this.dblTotalValueC + intAddNumInStock * doubleAddValueOfOneItem;
//Create the warehouse C array list.
this.createWareHouseC();
//display helpful information.
System.out.println("!--------------------------------");
System.out.println("!" + addItemName + " is the item name.");
System.out.println("!" + addNumInStock + " is the number in stock.");
System.out.println("!" + addInitWarehouse + " is the initial warehouse.");
System.out.println("!" + addValueOfOneItem + " is the value of one item.");
System.out.println("!--------------------------------------------------");
//Increment the counters.
count++;
/**Create and write to the output file. */
try
//Use the output file specified by the user.
PrintWriter out = new PrintWriter(outputFile);
/**Write warehouse A details.*/
//Blank the first line.
out.println(" ");
//Write the array list for warehouse A.
out.println(warehouseAList);
//Write the amount of items in warehouse A.
out.println(intWarehouseAItemCount);
//Write the total value for warehouse A.
out.println(dblTotalValueA);
/**Write warehosue B details.*/
//Write the array list for warehouse B.
out.println(warehouseBList);
//Write the amount of items in warehouse B.
out.println(intWarehouseBItemCount);
//Write the total value for warehouse B.
out.println(dblTotalValueB);
/**Write warehouse C details.*/
//Write the array list for warehouse C.
out.println(warehouseCList);
//Write the amount of items in warehouse C.
out.println(intWarehouseCItemCount);
//Write the total value for warehouse C.
out.println(dblTotalValueC);
//Close the output file.
out.close();
catch (FileNotFoundException e)
System.out.println("Error: Unable to open file for reading.");
catch (IOException e)
System.out.println("Error: Cannot read from file.");
/**View the contents and the value of each warehouse.*/
System.out.println("!---------------Inventory Summary------------------");
System.out.println("!--------------------------------------------------");
System.out.println("!--------------------LEGEND:-----------------------");
System.out.println("!<item type>, <amount in stock>,<value of one item>");
System.out.println("!--------------------------------------------------");
System.out.println("!------------------Warehouse A:--------------------");
System.out.println("!--------------------------------------------------");
//Display Items in warehouse A.
System.out.println(warehouseAList);
//Total items in warehouse A.
System.out.println("Total items: " + intWarehouseAItemCount);
//Display total value of warehouse A.
System.out.println("Total value: " + "$" + dblTotalValueA);
System.out.println("!--------------------------------------------------");
System.out.println("!------------------Warehouse B:--------------------");
System.out.println("!--------------------------------------------------");
//Display Items in warehouse B.
System.out.println(warehouseBList);
//Total items in warehouse B.
System.out.println("Total items: " + intWarehouseBItemCount);
//Display total value of warehouse B.
System.out.println("Total value: " + "$" + dblTotalValueB);
System.out.println("!--------------------------------------------------");
System.out.println("!------------------Warehouse C:--------------------");
System.out.println("!--------------------------------------------------");
//Display Items in warehouse C.
System.out.println(warehouseCList);
//Total items in warehouse C.
System.out.println("Total items: " + intWarehouseCItemCount);
//Display total value of warehouse C.
System.out.println("Total value: " + "$" + dblTotalValueC);
/**Display a help message.*/
private void displayHelp()
System.out.println("!--------------------------------");
System.out.println("! General Help:");
System.out.println("!--------------------------------");
System.out.println("! ");
System.out.println("!'help' display this help message.");
System.out.println("!'Q!' quit this program.");
System.out.println("!--------------------------------");
System.out.println("! Input File Specific Commands:");
System.out.println("!--------------------------------");
System.out.println("! ");
System.out.println("!'F' <name> type F followed by the name of the " +
"file to be used for input.");
System.out.println("!---------------------------------------");
System.out.println("! Input From Keyboard Specific Commands:");
System.out.println("!---------------------------------------");
System.out.println("! ");
System.out.println("!'K' <number> type K followed by the number of " +
"items that will be added. ");
System.out.println("! ");
}Program file:
public class InventoryProg
public static void main(String[] args)
//Create a new Inventory object.
Inventory test = new Inventory();
//Execute the command interpreter.
test.cmdInterpreter();
}Right now I am stuck on this and I cannot progress any further until I figure out how to input the data in the text file back into a arraylist.
Thanks in advance.Thanks but I figured it out. Heres a sample of the code i used to solve my problem:
try
//Warehouse A BufferedReader.
BufferedReader inA = new BufferedReader(new FileReader(inputFileWarehouseA));
//Warehouse B BufferedReader.
BufferedReader inB = new BufferedReader(new FileReader(inputFileWarehouseB));
//Warehouse C BufferedReader.
BufferedReader inC = new BufferedReader(new FileReader(inputFileWarehouseC));
//Warehouse details BufferedReader.
BufferedReader inDetails = new BufferedReader(new FileReader(inputFileDetails));
//Will hold values in warehouse arraylists.
String lineA = null;
String lineB = null;
String lineC = null;
//Will hold the details of each warehouse.
String line1 = null;
String line2 = null;
String line3 = null;
String line4 = null;
String line5 = null;
String line6 = null;
//Get the item count and total value for each warehouse.
while(inDetails.readLine() != null)
line1 = inDetails.readLine();
line2 = inDetails.readLine();
line3 = inDetails.readLine();
line4 = inDetails.readLine();
line5 = inDetails.readLine();
line6 = inDetails.readLine();
/**Assign the item count and total value to warehouse A.*/
//Cast.
int intLine1 = Integer.valueOf(line1).intValue();
double dblLine2 = Double.valueOf(line2).doubleValue();
//Assign the values.
this.intWarehouseAItemCount = intLine1;
this.dblTotalValueA = dblLine2;
/**Assign the item count and total value to warehouse B.*/
//Cast.
int intLine3 = Integer.valueOf(line3).intValue();
double dblLine4 = Double.valueOf(line4).doubleValue();
//Assign the values.
this.intWarehouseBItemCount = intLine3;
this.dblTotalValueB = dblLine4;
/**Assign the item count and total value to warehouse C.*/
//Cast.
int intLine5 = Integer.valueOf(line5).intValue();
double dblLine6 = Double.valueOf(line6).doubleValue();
//Assign the values.
this.intWarehouseCItemCount = intLine5;
this.dblTotalValueC = dblLine6;
/**Put the items back into the warehouses arraylists. */
//Add items to warehouse A.
while((lineA = inA.readLine()) != null)
warehouseAList.add(lineA);
//Add items to warehouse B.
while((lineB = inB.readLine()) != null)
warehouseBList.add(lineB);
//Add items to warehouse C.
while((lineC = inC.readLine()) != null)
warehouseCList.add(lineC);
}(this isn't the whole try statement its pretty long) -
Problem with inserting data into mySQL database with jsp
I have a jsp page that collects infromation about a users vehicle and puts the data into a mySQL database. Iv'e been messing around with it for ages & i can't seem to get it to work even though i cannot see anything wrong with the code, which can be seen below.
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ include file="Connections/connection.jsp" %>
<%
// *** Restrict Access To Page: Grant or deny access to this page
String MM_authorizedUsers="";
String MM_authFailedURL="login_form.jsp";
boolean MM_grantAccess=false;
if (session.getValue("MM_Username") != null && !session.getValue("MM_Username").equals("")) {
if (true || (session.getValue("MM_UserAuthorization")=="") ||
(MM_authorizedUsers.indexOf((String)session.getValue("MM_UserAuthorization")) >=0)) {
MM_grantAccess = true;
if (!MM_grantAccess) {
String MM_qsChar = "?";
if (MM_authFailedURL.indexOf("?") >= 0) MM_qsChar = "&";
String MM_referrer = request.getRequestURI();
if (request.getQueryString() != null) MM_referrer = MM_referrer + "?" + request.getQueryString();
MM_authFailedURL = MM_authFailedURL + MM_qsChar + "accessdenied=" + java.net.URLEncoder.encode(MM_referrer);
response.sendRedirect(response.encodeRedirectURL(MM_authFailedURL));
return;
String vehicle_details__registration = null;
if(request.getParameter("txt_registration") != null){ vehicle_details__registration = (String)request.getParameter("txt_registration");}
String vehicle_details__make = null;
if(request.getParameter("txt_make") != null){ vehicle_details__make = (String)request.getParameter("txt_make");}
String vehicle_details__model = null;
if(request.getParameter("txt_model") != null){ vehicle_details__model = (String)request.getParameter("txt_model");}
String vehicle_details__colour = null;
if(request.getParameter("txt_colour") != null){ vehicle_details__colour = (String)request.getParameter("txt_colour");}
String vehicle_details__tax_class = null;
if(request.getParameter("select_tax_class") != null){ vehicle_details__tax_class = (String)request.getParameter("select_tax_class");}
String vehicle_details__chasis_num = null;
if(request.getParameter("chasis_num") != null){ vehicle_details__chasis_num = (String)request.getParameter("chasis_num");}
String vehicle_details__status = null;
if(request.getParameter("radio_status") != null){ vehicle_details__status = (String)request.getParameter("radio_status");}
String owner_details__MMColParam = "1";
if (session.getValue("MM_Username") !=null) {owner_details__MMColParam = (String)session.getValue("MM_Username");}
Driver Drivervehicle_details = (Driver)Class.forName(MM_connection_DRIVER).newInstance();
Connection Connvehicle_details = DriverManager.getConnection(MM_connection_STRING,MM_connection_USERNAME,MM_connection_PASSWORD);
PreparedStatement vehicle_details = Connvehicle_details.prepareStatement("INSERT INTO vehicle_man_db.vehicle_details (registartion, make, model, colour, tax_class, chasis_num) VALUES ('"+ String vehicle_details__registration + "', '"+ String vehicle_details__make + "', '"+ String vehicle_details__model + "', '"+ String vehicle_details__colour + "', '"+ String vehicle_details__tax_class + "', '"+ String vehicle_details__chasis_num + "', '"+ String vehicle_details__status + "')");
vehicle_details.executeUpdate();
%>
<form name="add_vehicle_form" id="add_vehicle_form">
<p>Registration mark:
<input name="txt_registration" type="text" id="txt_registration">
</p>
<p>Make:
<input name="txt_make" type="text" id="txt_make">
</p>
<p>Model:
<input name="txt_model" type="text" id="txt_model">
</p>
<p>Colour:
<input name="txt_colour" type="text" id="txt_colour">
</p>
<p>Tax Class:
<select name="select_tax_class" id="select_tax_class">
<option value="AAA">Band AAA (up to 100g/km)</option>
<option value="AA">Band AA (101 - 120g/km)</option>
<option value="A">Band A (121 - 150g/km)</option>
<option value="B">Band B (151 - 165g/km)</option>
<option value="C">Band C (166 - 185g/km)</option>
<option value="D">Band D (Over 185g/km)</option>
</select>
</p>
<p>Chasis Number:
<input name="txt_chassis_num" type="text" id="txt_chassis_num">
</p>
<p>Status: active:
<input name="radio_status" type="radio" value="1" checked>
off-road
<input name="radio_status" type="radio" value="0">
</p>
<p>
<input type="submit" name="Submit" value="Submit">
</p>
</form>
<%
Connvehicle_details.close();
%>This is the error I am getting from the server
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 3 in the jsp file: /add_vehicle_form.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\Assignment\org\apache\jsp\add_005fvehicle_005fform_jsp.java:113: ')' expected
PreparedStatement vehicle_details = Connvehicle_details.prepareStatement("INSERT INTO vehicle_man_db.vehicle_details (registartion, make, model, colour, tax_class, chasis_num) VALUES ('"+ String vehicle_details__registration + "', '"+ String vehicle_details__make + "', '"+ String vehicle_details__model + "', '"+ String vehicle_details__colour + "', '"+ String vehicle_details__tax_class + "', '"+ String vehicle_details__chasis_num + "', '"+ String vehicle_details__status + "')");
^
1 error
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:332)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:412)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Any help would be much appreciated.
Thanksuse this ...
PreparedStatement vehicle_details =
Connvehicle_details.prepareStatement("INSERT INTO
vehicle_man_db.vehicle_details (registartion, make,
model, colour, tax_class, chasis_num) VALUES
vehicle_details .setString(1,String
vehicle_details__registration );
vehicle_details setString(2,String
vehicle_details__make );
vehicle_details .setString(3,String
vehicle_details__model );
vehicle_details .setString(4,vehicle_details__colour
vehicle_details .setString(5,String
vehicle_details__tax_class);
vehicle_details .setString(6,String
vehicle_details__chasis_num );
vehicle_details .executeQuery();Even you need a screwing up... what's the point putting that String inside. That's the bloody error. -
Adobe form not saving user-input data into saved pdf file
Hi forumers,
I'm a new abap developer and I'm tasked to create an interactive adobe form that will require the user to input data in the form.
No data is passed and received from PDF, but PDF has to be u2018Fillableu2019. I am able to fill out the form but when I actually save the form, it will be saved as a blank form again. I've seen the relevance of the LS_DOCPARAMS-FILLABLE = 'X' on this forum and I have incorporated it in my code. But how should I code the abap program to enable to save the user input as well into the form.
DATA: GV_FMNAME TYPE FPNAME,
LS_DOCPARAMS TYPE SFPDOCPARAMS,
LS_OUTPUTPARAMS TYPE SFPOUTPUTPARAMS.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
I_NAME = 'ZSC_ZRUFORREP'
IMPORTING
E_FUNCNAME = GV_FMNAME
* E_INTERFACE_TYPE =
* EV_FUNCNAME_INBOUND =
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
IE_OUTPUTPARAMS = LS_OUTPUTPARAMS
EXCEPTIONS
CANCEL = 1
USAGE_ERROR = 2
SYSTEM_ERROR = 3
INTERNAL_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LS_DOCPARAMS-FILLABLE = 'X'.
LS_DOCPARAMS-DYNAMIC = 'X'.
CALL FUNCTION GV_FMNAME
EXPORTING
/1BCDWB/DOCPARAMS = LS_DOCPARAMS
* IMPORTING
* /1BCDWB/FORMOUTPUT =
EXCEPTIONS
USAGE_ERROR = 1
SYSTEM_ERROR = 2
INTERNAL_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
USAGE_ERROR = 1
SYSTEM_ERROR = 2
INTERNAL_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
dgracheeNot quite yet, I have to say...
If you check the domain "FPINTERACTIVE", you'll see these values:
Print Form
X Interactive Form with Additional Usage Rights
N Interactive Form Without Additional Usage Rights
F
So, you are not providing "additional usage rights" (Adobe Form Credentials), meaning there could be a problem when you want to use those forms in a Production environment. -
EPM add-in problem with input data,retrieve dimension or members
Hello everyone,
I am trying to use data write back (input data) function with EPM add-in in Dashboards. I managed successfully bringing results of an EPM report. I've created a local connection at EPM, and created a connection at data manager for"Planning and consolidation, version for SAP netweaver platform". And i could get the values via refreshing connection at preview mode, so far so good. Now i want to add a connection which will serve as data write back function to a specific BPC cube. The problem is, I can retrieve data source name and environment name. But when i click to retrieve model names, it retrieves empty results. The problem exist in, "retrieve dimension" and"retrieve dimension members" functionalities too. I realized that i could retrieve model names for only one specific environment, but even i could get these, when i try to retrieve "cell definition" i am facing an error. You can see related screenshots below.
I am using Dashboards 4.1 SP2, EPM connector 10 SP 17. I created two connections as local and business planning and consolidation for netweaver. I selected same environment and model name for these connections. Neither did work. Any ideas?
Update: The reason i could see some model names and some others not was i didn't specified the model as data source at:
Enable BPC Model as reporting data source
Logon to BPC 10.0 NW web client -> Planning and Consolidation Administration -> Dimensions and Models -> Models -> Select the Model -> Edit -> Features Used with the Model -> mark check box 'Use as Source of Data' -> Save.
I will update here if i could find a solution for the other issue. (First screenshot).
Update_2: The problem was occuring because i wasn't connecting to transient cube, created automatically by applying the step at Update_1. While creating a local connection, you shouldn't connect to the original cube, but to the transient one instead to use input data functionality.
Regards,
Onur
Message was edited by: Onur GöktaşHI,
I believe it is definitely the support pack. I posted an issue on this forum and I saw your post. Your issue is very similar to mine. I saw Andy's reply to you about the SP 18 and looked into it. Thanks Andy. SP 18 resolved my issue. See my post. Kathy -
How to write input data into an xml file
Hi All,
I have some input data and i have to write it
into an xml file.How is it possible send me some related
links regarding this and source code if any.Hi
Try to go through these links.I hope this will help you to solve your problem.
http://www.xml.com/pub/a/2003/07/09/udell.html
Thanks
Mrutyunjaya Tripathy -
Cannot input data into Text Field on from Adobe Acrobat Reader
I created a form in Acrobat 5 that has check boxes and text fields. Using reader I can open the doc and use check boxes and input text into fields. Once this doc is loaded to our web server and a user opens or downloads the file they can check the boxes but cannot enter any text into the text fields. Am I missing something?
Thanks in advanceAnd so.. what is invalid?
I've uploaded the pdf files as example:
My generated pdf
http://compuhelp.free.fr/adobe/before.pdf
The modified version by Adobe Acrobat Reader:
http://compuhelp.free.fr/adobe/after.pdf
(I can generate a more complexe pdf file with fonts, images,... it will be displayed correctly, but Adobe always want to modifiy it).
So perhaps I missed somthing into the pdf file format specification ? -
How to convert the input Dates into ReminderInfo in AssignTask Activity!!
Hi
We are reading reminder time and Date from the user thru the form. We want to bind this input date and time with ReminderInfo data type to set
Reminders in Assign Task Activity.
Please find the ppt for more info.
Please help us in this regard.
Thanks
PraveenNith,
I know this thread is old, but how do you identify the Assign Task instance you want to adjust?
I see processData/asdf..... in your screen shot - is this a global reference to assign task objects or to a specific instance?
I have a process that has multiple assign task calls in it, and only want to set reminders on one of them.
Thanks for your help - as always.
Mark -
Can you input data into Ipod without a computer?
Just Wondering if a keyboard or some kind of device was made to input data directly on the ipod. That would be really useful. Let me know if any of you know anything about it.
Cheers!
Dax
Ipod Fifth Gen Mac OS X (10.3.9)Thanks for your time! I hope they came up with an ipod pda type you know, touch screen, Tha'd be sweet! Anyways thanks again.
Maybe you are looking for
-
Can't get iPhone 4 to work with SpeakOut SIM
Hi there, I have an iPhone 4 that was previously locked on the Telus network. I had it unlocked by Telus so that I could use it with the prepaid SpeakOut carrier. I know that it was successfully unlocked because it takes SIM cards from other carriers
-
Mac Book Pro First Generation Sleep issue
I have a macbook pro first generation with the 1.8Ghz dual core (I added 1 GB ram for a total of 1.5GB). After updating it to OSX 10.4.8, the computer is having sleep issue. If I try to put it to sleep using the sleep command, it will go to sleep, bu
-
It's a WinXP box. The appearance is Brushed Metal. Extensions are WOT, Java Quick Starter 1.0, and avast! WebRep 6.0.1289; .NET Framework Assistant has been disabled. Plugins include Adobe Acrobat, Java Deployment Toolkit, and more. I'm about to add
-
I am trying to get an app for my iPad and I am getting an unknown error message
I am trying to get an app for my iPad and I am getting an unknown error message.
-
How to create a portal footer for copyright link?
Hi Experts, I got a new task from my customer, they wants to create a footer for portal, where some links suppose to display ( Copyright, Privacy Policy ) Is it possible to set this footer without any development? I had an idea: In Portal Content>Por