Execute a workbook in background???
hi collegues
We are working with a BIW 7.0 and we want to execute in background a workbook. Do u know if itś possible? Could you give some ticks or steps to configure it??
we need this functionallity to send directly the woorkbook (with data) to the printer. The user doesnt need to see any information in the screen. any standard funtionallity for this issue??
thanks a lot in advanced
Hi,
you could consider to use the BEx broadcaster. See [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/05/0e044017355c0ce10000000a1550b0/frameset.htm]
Best regards,
Ralf
Similar Messages
-
Executing BW Workbooks from EP as background process
Hi all!
I need to execute BEX workbooks from Enterprise Portal with automatically predefined values of variables. Iu2019d like to do this in two ways: normal (ordinary way) and as background process (result: xls. file). Can you help me?Hi Alzatula,
You can do this in information broadcasting.
You can configur broadcast settings for workbooks.
The prerequisite is you need a precalculation server.
Check on sdn, how to register a precalculation server.
You can execute it in foreground or you can schedule it in background.
Check this link, it may help you to set up the broadcast setting.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00172934-f3c1-2b10-728a-c42a0fc28c61
Check this how to as well
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d09dea78-b61a-2b10-c7ad-acd94d64079a
Information broacasting can be called through BEx broadcaster in EP.
Hope it helps,
Regards,
Sunmit. -
I need to Execute a workbook at a certain time of the month automatically in the background, How can I achieve this?
Edited by: xcal on Sep 23, 2008 7:10 PMHi.....
It is mandatory the precalculation server is needed for distributing the workbook..
https://service.sap.com/~sapidb/012003146900000085752006E/HowtoInformationBroadcasting.pdf
Also check this link :
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/bex-broadcaster-824750#
Regards,
Debjani..... -
Executing BW workbooks from EP as back groun process
Hi all!
I need to execute BEX workbooks from Enterprise Portal with automatically predefined values of variables. Iu2019d like to do this in two ways: normal (ordinary way) and as background process (result: xls. file). The question is how to execute Bex analyzer in background mode?
Thanks.Hi Alzatula,
You can do this in information broadcasting.
You can configur broadcast settings for workbooks.
The prerequisite is you need a precalculation server.
Check on sdn, how to register a precalculation server.
You can execute it in foreground or you can schedule it in background.
Check this link, it may help you to set up the broadcast setting.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00172934-f3c1-2b10-728a-c42a0fc28c61
Check this how to as well
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d09dea78-b61a-2b10-c7ad-acd94d64079a
Information broacasting can be called through BEx broadcaster in EP.
Hope it helps,
Regards,
Sunmit. -
Require Job name in SM37 while executing call transaction in background
Hi all,
I am executing a report program, which contains Call transaction.
I have recorded properly. The recording contains background job screen also ( means a separate popup came and i gave the job name and i gave immediately )
When i execute in this program in foreground its creating job,its showing the job in sm37.
But when i execute this program in background, it does not showing the job name in sm37.
Anyone kindly help this out?
AnandhabHi,
The job will be created by the step level user.
Try searching again with jobname and * for username.
Regards,
Jovito -
Error while executing the workbook query.
Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil VaddeHey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK -
Got system error while executing the workbook
Hi All,
While executing the workbook, I m getting the following error:=-
Abort system error:RSDRC/ Function rsdrc_cube datget_disp rfc tas
Abort system error:RSDRC/ Func RSRDC_MULTICUBE_DATA_GET_PARA ERROR IN RSDRC_Hi Sonika,
I think the DataTarget is not in active status.
Assign points if it helps...
Regards,
ARK -
BDC is not working in when executing the program in background
Hi gurus,
I have a problem that in BDC is not working when i'm executing the upload program in background thru scheduling(SM36) , while it works fine when i execute directly with NO screen display modeMany transactions behave differently when executed in foreground and background. The fields on the screen may be different.
In transaction SHBD when starting a recording there is a checkbox where you can select 'Simulate Background Mode'. If you do your recording using this option you will get the code suitable for background mode. If you do not select this option you will get a code for foreground mode.
By compairing the two codes you will know the changes required for background mode.
Hope this helps you -
Executing the program in Background
Hi experts i'm trying to Execute the Program in background.
Given the Input and output file locations and Press F9 for process the program in background from SE38. cause i want to run my program as a batch(Background)
but its not accepting. can you please help me how to resolve this issue.
i'm providing the code can you please verify that.
Many Thanks
SELECTION-SCREEN *
selection-screen begin of block b1 with frame title text-001.
*.. Filename
PARAMETERS: f_name TYPE char100, "Upload filename
d_name TYPE char100. " Download filename
selection-screen end of block b1 .
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_serv radiobutton group RAD1,
p_frnt radiobutton group RAD1 default 'X'.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR f_name.
*.. Data Declaration
DATA: lt_file TYPE filetable,
lv_file TYPE LINE OF filetable,
rc_i TYPE i,
cl_gui TYPE REF TO cl_gui_frontend_services,
w_path LIKE dxfields-longpath.
*.. Check if from server or frontend
IF p_frnt = 'X'.
*.. Create objects for method
CREATE OBJECT cl_gui.
*.. Clear the filename
CLEAR f_name.
*.. Call method to search for file
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Choose Input File'
CHANGING
file_table = lt_file
rc = rc_i
EXCEPTIONS
OTHERS = 4.
*.. Check if file found
IF sy-subrc EQ 0.
*.. Check that file path not empty
CHECK NOT lt_file[] IS INITIAL.
LOOP AT lt_file INTO lv_file.
*.. Set parameter to filename
f_name = lv_file-filename.
ENDLOOP.
ENDIF.
*.. Free object
FREE cl_gui.
*.. Upload from Server
ELSE.
Retrieve filename
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
EXPORTING
i_location_flag = 'A'
i_server = ' '
i_path = '/sap_ftp/'
filemask = '**'
fileoperation = 'R'
IMPORTING
O_LOCATION_FLAG =
O_SERVER =
o_path = w_path
ABEND_FLAG =
EXCEPTIONS
rfc_error = 1
error_with_gui = 2
OTHERS = 3.
Set file path
f_name = w_path.
ENDIF.
*.. File selection for output file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR d_name.
*.. Only allow search for front-end
IF p_frnt = 'X'.
*.. Data Declaration
DATA: lt_file TYPE filetable,
lv_file TYPE LINE OF filetable,
rc_i TYPE i,
cl_gui TYPE REF TO cl_gui_frontend_services.
*.. Create objects for method
CREATE OBJECT cl_gui.
*.. Clear the filename
CLEAR d_name.
*.. Call method to search for file
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Choose Input File'
CHANGING
file_table = lt_file
rc = rc_i
EXCEPTIONS
OTHERS = 4.
*.. Check if file found
IF sy-subrc EQ 0.
*.. Check that file path not empty
CHECK NOT lt_file[] IS INITIAL.
LOOP AT lt_file INTO lv_file.
*.. Set parameter to filename
d_name = lv_file-filename.
ENDLOOP.
ENDIF.
*.. Free object
FREE cl_gui.
ENDIF.
*.. General Checks for Selection screen
AT SELECTION-SCREEN.
*.. Check if program run in batch mode and ping directory
IF sy-batch = 'X'.
*.. Move filename to file_name
file_name = d_name.
*.. Check if path can be reached
OPEN DATASET file_name FOR INPUT IN TEXT MODE.
IF sy-subrc NE 0.
MESSAGE e082(zsomerfield).
ENDIF.
ENDIF.
NITIALIZATION.
*.. ALV Variables
variant_save = 'A'.
w_repid = sy-repid.
w_variant_handle = c_handl.
START-OF-SELECTION *
START-OF-SELECTION.
*.. Check if batch program running in batch mode or not
IF sy-batch = 'X'.
*.. Open file on application server for reading
OPEN DATASET file_name FOR INPUT IN TEXT MODE.
DO.
*.. Upload entries
READ DATASET file_name INTO zpernr.
*.. IF end of file reached then exit DO statement
IF sy-subrc = '4'.
EXIT.
ELSE.
*.. IF entry found then add to employee table
in_file-empnum = zpernr.
*.. Add entries to table
APPEND: in_file.
*.. Clear header lines
CLEAR: in_file, zpernr.
ENDIF.
ENDDO.
*.. Close dataset
CLOSE DATASET file_name.
*.. Get file from frontend and run in foreground
ELSE.
*.. Upload from local machine.
DATA: file_name TYPE string. "LIKE rlgrap-filename,
*.. Set filename to filename from screen
file_name = f_name.
*.. Upload the information from the file into the table in_file
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
TABLES
data_tab = in_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
*.. Make sure file uploaded correctly
IF sy-subrc <> 0.
MESSAGE E018(ZHR_MESSAGES).
ELSE.
MESSAGE i017(ZHR_MESSAGES).
ENDIF.
ENDIF.Hi Vamsi,
<b>First Check in the Foreground your program is working for the application server file or not</b>
When you will Execute your program in Background internal table "ZPERNR" will be populated from the file that is there on the application server.
After that what you want to do with the internal table.I think you have not sent the whole code.
In background FM GUI_UPLOAD willl not work.
If you want to debug your code put wait for 100 seconds at the place where you want to dubug your code.Go to transaction code SM50 your job will be running there.
Select Your job
Go to Menu Bar Program/Mode - > program - > Debugging.
In this way you can debug your code.
First Check in the Foreground your program is working for the application server file or not -
How to execute ME22N transaction in background.
Hi experts,
How to execute ME22N and ME23N in background, when execute the transaction in background, , it should generate a spool, with out any printpreview. How can we do this....?
thanksHi,
Write a BDC program for updation of tables for u r user-exit.
After that Schedule u r program in back gound job scheduling.
Using SM36 - Define Background job.
Give the job name and Press job wizard button.
It's asking about job name and job class -prioritty.
press continue and give program name .
Select radiobutton based on u r requirement.
Then specify periodic job or only in holidays.
Then u select hours and all.
In SM37 give u r job name and and press execute.
Reward if useful.
Regards,
Narasimha -
Database Alert Macros issue while executing the macros in Background
Hi All,
I am facing some problems while executing the Database alert macros in Background/Process Chain.
There are two macros for which the problem exists.
1.Excess Projected Inventory above Max
The logic here is, the alert should work for Only Fixed Lot size Procedure.
If the Stock on hand (projected EA) > (Safety Stock (EA) + Full SOQ (EA)) then alert = "Projected inventory is XX% above MAX".
XX is the Percent above Max.
Note: SOQ => fixed lot size.
2.Excess Actual Days of Supply
The Logic here is, the alert should work for all Lot size Procedures except for "Fixed lot size".
Actual Days Supply >=180 days. (current -> future buckets)
- For every receipt cell check the Actual Days Supply - if >= 180 days.
The macros are working perfectly as expected.Hi Abhi,
Hope you are doing good.
Yes exactly, the macros are working in foreground/Interactively but not in the Background via Process chain. Let me send the details again.
Issue :
I am facing some problems while executing the Database alert macros in Background/Process Chain.
There are two macros for which the problem exists.
1.Excess Projected Inventory above Max
The logic here is, the alert should work for Only Fixed Lot size Procedure. But in Background the alerts are getting created for Lot for Lot and other Planning procedures..
If the Stock on hand (projected EA) > (Safety Stock (EA) + Full SOQ (EA)) then alert = "Projected inventory is XX% above MAX".
XX is the Percent above Max.
Note: SOQ => fixed lot size.
2.Excess Actual Days of Supply
The Logic here is, the alert should work for all Lot size Procedures except for "Fixed lot size". But in Background the alerts are getting created for the Fixed Lot size procedures too..
Actual Days Supply >=180 days. (current -> future buckets)
- For every receipt cell check the Actual Days Supply - if >= 180 days.
The macros are working perfectly as expected in Foreground/Interactively but the samething is not happening while executing the macro in Background/Process Chain.
I have tried running these macros in different sequences(Default/Start/Macro) but couldn't able to resolve the issue.
Thanks in Advance,
Jay. -
How to execute an RFC in background
Hello People!
Is there a way of execute an RFC in background without broken the execution after connection timeout? I have a RFC calling another RFC in background mode but the process stops after connection timeout. As far as I know, the sap user connection is done like DIALOG and, after timeout, all processes started are finished.
I thought to use JCO directly but i'm looking for a better solution.
Thanks to all.
Best regards,
MarceloProcess p = Runtime.getRuntime().exec("yourCommand.exe");
-
Error while executing the WorkBook
Hi,
While executing WorkBook, I am facing an error "A critical program error has occured. The program will now terminate.Please refer to the trace for further information".
When I check in the trace, the error description is "System.NullReferenceException: Object reference not set to an instance of an object."
Can someone plese guide me on how to solve this issue !!
Thanks & Regards
Seshendra ReddyHi,
Make sure you have .NET framework 2.0 with latest Service Packs installed on your system. Also try and see if you will be able to run the report by having more selections for restricting the data to a minimum. This is because, BI 7, uses more memory than what BW3.5 used to use. This inturn results in some reports not to run for same selection for which we could get back result in BW3.5
Thanks,
KR
Edited by: KR on Jan 20, 2009 3:59 PM -
Problem when I execute program SCM in background
Hi experts,
I am with problem when I execute a program (SCM) in background. I inserted a new field (estoque_seg(10)) and the process stopped at execute in background.When I call transaction and press F8, works but for this, I need jump the consistence IF sy-batch IS INITIAL....Dont has any bath imput, only functions. Any idea?
Follow below the code:
Estrutura para tabela ENTRADA
DATA: BEGIN OF st_entrada,
matnr(40) TYPE c,
werks(20) TYPE c,
ponto_abas(10) TYPE c,
estoque_max(10) TYPE c,
cobertura(10) TYPE c,
estoque_seg(10) TYPE c, " Erlon Lourenço 20/01/2011
END OF st_entrada.
Estrutura para tabela de LOG
*TYPES: BEGIN OF st_saida,
pernr(8) TYPE c ,
date(10) TYPE c,
er_contribuition(15) TYPE c,
tax(15) TYPE c,
msg_erro(80) TYPE c,
END OF st_saida.
Tabela para obter descricao da mensagem
*DATA: ti_saida TYPE STANDARD TABLE OF st_saida WITH HEADER LINE
INITIAL SIZE 0.
Tabela que recebera o arquivo texto
DATA: BEGIN OF ti_entrada OCCURS 0.
INCLUDE STRUCTURE st_entrada.
DATA: END OF ti_entrada.
DATA: BEGIN OF it_matid OCCURS 0,
matnr TYPE /sapapo/matkey-matnr,
matid TYPE /sapapo/matkey-matid,
END OF it_matid.
DATA: BEGIN OF it_locid OCCURS 0,
locno TYPE /sapapo/loc-locno,
locid TYPE /sapapo/loc-locid,
END OF it_locid.
DATA: BEGIN OF it_matlotsz OCCURS 0,
target_dur TYPE /sapapo/matlotsz-target_dur,
END OF it_matlotsz.
DATA: wa_matloc LIKE /sapapo/matloc OCCURS 0 WITH HEADER LINE,
wa_matlsim LIKE /sapapo/matlsim OCCURS 0 WITH HEADER LINE,
wa_matlotsz LIKE /sapapo/matlotsz OCCURS 0 WITH HEADER LINE.
Variáveis Globais
DATA: v_tabix TYPE sy-tabix,
v_vrsioid TYPE /sapapo/apo01-vrsioid,
v_tam TYPE i.
Select-Options & Parameters
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_versao TYPE /sapapo/apo01-vrsioex OBLIGATORY DEFAULT '000',
p_abas AS CHECKBOX ,
p_est AS CHECKBOX ,
p_cober AS CHECKBOX ,
p_estsg AS CHECKBOX. " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
SELECTION-SCREEN END OF BLOCK b1.
Start-of-Selection
START-OF-SELECTION.
PERFORM consiste.
PERFORM f_upload.
PERFORM f_processa_batch.
PERFORM f_saida_dados.
MESSAGE i000 WITH 'Processo encerrado com Sucesso'.
END-OF-SELECTION.
*& Form F_UPLOAD
text
--> p1 text
<-- p2 text
FORM f_upload .
DATA: lc_file TYPE string.
TYPES: BEGIN OF st_ent,
cam(80),
END OF st_ent.
DATA: ti_ent TYPE STANDARD TABLE OF st_ent WITH HEADER LINE
INITIAL SIZE 0.
RANGES: r_file FOR zget0001-field_content.
r_file[] = zbs_constantes=>obter( i_bukrs = space i_field = 'FILE' i_process = 'PONTO-REAB' ).
READ TABLE r_file INDEX 1.
lc_file = r_file-low.
CLEAR: ti_entrada,
ti_entrada[],
ti_ent,
ti_ent[].
abrir arquivo para leitura
OPEN DATASET lc_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01.
STOP.
ENDIF.
Leitura de arquivos
DO.
READ DATASET lc_file INTO ti_ent.
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND ti_ent.
ENDDO.
Fechamento do arquivo
CLOSE DATASET lc_file.
LOOP AT ti_ent.
SPLIT ti_ent AT ';' INTO ti_entrada-matnr ti_entrada-werks ti_entrada-ponto_abas ti_entrada-estoque_max ti_entrada-cobertura ti_entrada-estoque_seg.
APPEND ti_entrada.
ENDLOOP.
ENDFORM. " F_UPLOAD
*& Form F_PROCESSA_BATCH
text
--> p1 text
<-- p2 text
FORM f_processa_batch .
LOOP AT ti_entrada.
v_tabix = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-matnr
IMPORTING
output = ti_entrada-matnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-ponto_abas
IMPORTING
output = ti_entrada-ponto_abas.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-estoque_max
IMPORTING
output = ti_entrada-estoque_max.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-cobertura
IMPORTING
output = ti_entrada-cobertura.
IA - ERLON LOURENCO - 20/01/2012
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-estoque_seg
IMPORTING
output = ti_entrada-estoque_seg.
FA - ERLON LOURENCO - 20/01/2012
MODIFY ti_entrada INDEX v_tabix.
ENDLOOP.
CLEAR: it_matid,
it_matid[],
it_locid,
it_locid[],
wa_matlsim,
wa_matlsim[],
wa_matloc,
wa_matloc[].
SELECT matnr matid INTO TABLE it_matid FROM /sapapo/matkey
FOR ALL ENTRIES IN ti_entrada WHERE matnr = ti_entrada-matnr.
SELECT locno locid INTO TABLE it_locid FROM /sapapo/loc
FOR ALL ENTRIES IN ti_entrada WHERE locno = ti_entrada-werks.
IF p_versao = '000'.
LOOP AT ti_entrada.
READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
IF sy-subrc = 0 .
READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
IF sy-subrc = 0.
SELECT SINGLE * INTO wa_matloc FROM /sapapo/matloc WHERE matid = it_matid-matid AND
locid = it_locid-locid.
IF sy-subrc = 0.
IF p_abas = 'X'.
wa_matloc-reord = ti_entrada-ponto_abas.
ENDIF.
IF p_est = 'X'.
wa_matloc-maxstock = ti_entrada-estoque_max.
ENDIF.
" IA - Erlon Lourenço - 23/01/2012
if p_estsg = 'X'.
wa_matloc-safty = ti_entrada-estoque_seg. " Erlon Lourenço - 23/01/2012
endif.
"FA - Erlon Lourenço - 23/01/2012
IF p_abas = 'X' OR
p_est = 'X' OR
p_estsg = 'X'. " Erlon Lourenço - 23/01/2012
APPEND wa_matloc TO wa_matloc.
ENDIF.
SELECT SINGLE * INTO wa_matlotsz FROM /sapapo/matlotsz WHERE lszid = wa_matloc-lszid.
IF sy-subrc = 0.
IF p_cober = 'X'.
wa_matlotsz-target_dur = ti_entrada-cobertura.
APPEND wa_matlotsz TO wa_matlotsz.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " LOOP AT ti_entrada.
ELSE.
Verifica versáo para saber se preenche a tabela wa_matlsim
SELECT SINGLE vrsioid INTO v_vrsioid FROM /sapapo/apo01 WHERE vrsioex = p_versao.
IF sy-subrc = 0.
SELECT * INTO TABLE wa_matlsim FROM /sapapo/matlsim WHERE simid = v_vrsioid.
IF wa_matlsim[] IS NOT INITIAL.
LOOP AT ti_entrada.
READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
IF sy-subrc = 0 .
READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
IF sy-subrc = 0.
READ TABLE wa_matlsim WITH KEY matid = wa_matloc-matid
locid = wa_matloc-locid.
IF sy-subrc = 0.
wa_matlsim-reord = ti_entrada-ponto_abas.
wa_matlsim-maxstock = ti_entrada-estoque_max.
wa_matlsim-safty = ti_entrada-estoque_seg. " Erlon Lourenço - 23/01/2012
MODIFY wa_matlsim INDEX v_tabix.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " LOOP AT ti_entrada.
ENDIF. " IF wa_matlsim[] IS NOT INITIAL.
ENDIF. " IF sy-subrc = 0. 1º
ENDIF. "IF p_versao = '000'
Funcáo que atualiza campos nas bases de dados.
CALL FUNCTION '/SAPAPO/DM_PRODUCTS_POST'
EXPORTING
iv_vb = 'U'
TABLES
it_matloc = wa_matloc
it_matlsim = wa_matlsim
it_matlotsz = wa_matlotsz
EXCEPTIONS
not_qualified = 1
insert_failed = 2
update_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_PROCESSA_BATCH
FORM BDC_DYNPRO
*& Form F_SAIDA_DADOS
text
--> p1 text
<-- p2 text
FORM f_saida_dados .
IF ti_saida[] IS NOT INITIAL.
DATA: lc_file TYPE string.
lc_file = p_erros.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = lc_file
FILETYPE = 'ASC'
TABLES
data_tab = ti_saida
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE i005 WITH 'Error to unload file !'.
STOP.
ENDIF.
ENDIF.
ENDFORM. " F_SAIDA_DADOS
*& Form CONSISTE
text
--> p1 text
<-- p2 text
FORM consiste .
IF p_abas IS INITIAL AND
p_est IS INITIAL AND
p_cober IS INITIAL AND
p_estsg IS INITIAL. " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
MESSAGE i000 WITH text-e03.
STOP.
ENDIF.
IF sy-batch IS INITIAL.
MESSAGE i000 WITH text-e02.
STOP.
ENDIF.
Best regards,
Erlon Lourenço
Edited by: Erlon Louren on Jan 27, 2012 11:09 AMHi Raja,
Check weather there are any enhancements to the datasource.If yes once check the code in CMOD.Seems there is some discrepency in that.
Regards
Karthik -
How to Execute RMDATIND inside another Background Job using a variant?
Hi,
It is only possible to start RMDATIND (direct input) in background from transaction BMV0 u2013 it is impossible just to place the program in another job in SM37 or SM36.
In a related thead I saw : u201DSolved my self by using BI_START_JOB. If I use this function module along with RS_CREATE_VARIANT and RS_VARIANT_DELETE. u201C
Following is the link to that thread
Re: Problem in using JOB_OPEN, JOB_SUBMIT & JOB_CLOSE
RS_CREATE_VARIANT (Creating a variant (not using a selection screen))
RS_VARIANT_DELETE(Variant to be deleted)
BI_START_JOB
Can some one provide me with all the parameters required to execute the above Function Modules?Hi,
Refer below thread:
Process Control in Confirmation Parameters
All the relevant details are explained in detail..
Best Regards,
Siva
Maybe you are looking for
-
Different Apple IDs for iCloud on 2 iOS5 devices
I have two Apple IDs. When setting up iCloud on myiPad I made the mistake of using a different Apple ID from the one I used on my iPhone, and there doesn't seem to be any way of reversing this so that they both access iCloud with the same Apple ID. A
-
[AwesomeWM] Applications locked to one screen in a dual monitor setup
Perhaps the title should be "Multiple Screens with multiple video cards." I imagine my confusion here is the reason I am unable to move clients from one screen to the other in awesome. Though the cursor moves fluidly between Screen1 and 2, MOD4+dra
-
CS3 Removing effect from one object changes all other images on page-!???
I'm reusing an 80 page document that I created last year as the template for an updated version of the same document. There are images on almost every page. In the previous version of the document most images had a drop shadow applied, but this year
-
Rosetta Problems after Security Update 2012-001
My crack team of sys admins and I have devised a method for resolving some of the issues regarding the Security Update 2012-001 and Rosetta. http://www.educate-it.org/content.php?130-Rosetta-Issue-after-Security-Update-20 12-001 Click this link for a
-
Hi everybody, I want to lock a client for a period of time. How can I do it? Thanks in advance venkatesh