Execute report from local drive from Forms 9i Apps

Hi - I have a requirement to run the report saved in windows network drive from FORMS 9i which is installed on AIX. looking forward for your help.
Requirement:
Forms application is invoked through the APPS server installed on AIX.
Report code RDF, REP is saved in Windows drive.
When i press a button in FORMS, reports in the windows drive should be executed and displayed to the users.
Thanks in advance.
regards,
Vikram.

This is not possible. Forms/Reports 9i is web based, so the forms and reports need to be on the app server. You cannot run a report on a local drive (I assume you mean your own PC). Why don't you copy the report to the server?
You can try to map a directory on the AIX server to a shared Windows directory and put this directory in the reports_path variable.
However, you cannot run a Windows compiled REP file on an AIX server, so you need to save the RDF only.

Similar Messages

Error executing reports from forms

Hi,
Iam trying to launch reports9i from forms9i,
Iam getting following error,
500 Internal Server Error
java.lang.StringIndexOutOfBoundsException: String index out of range: 0
     at java.lang.String.charAt(String.java:444)
     at oracle.reports.rwclient.ServletCmdMgr.getJobId(ServletCmdMgr.java:3131)
     at oracle.reports.rwclient.ServletCmdMgr.handleCmdGetjob(ServletCmdMgr.java:1255)
     at oracle.reports.rwclient.CommandManager.handleWebCommand(CommandManager.java:92)
     at oracle.reports.rwclient.ServletCmdMgr.handleWebCommand(ServletCmdMgr.java:278)
     at oracle.reports.rwclient.RWClient.handleWebCommand(RWClient.java:915)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1398)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Can anyone help me in this regard,
Thanks and regards,
Avinash,
Pune.
India.

"Iam trying to launch reports9i from forms9i"
your forms version is 10g :-)

Printing a report from Forms 9i

Hi all
I have to print a report from Forms 9i, but I can't do it directly, I have to execute it with desname = preview and then I can print it.
I use the following sintax
RUN_REPORT_OBJECT_PROC(repid, v_server_name,'pdf',printer,v_path,v_report,'paramform=no'|| other parameter....,v_servlet)
where v_path is the name of the printer and run_report_object is a procedure to execute reports into forms
I try to set v_path with the printer name on my client and on the server.. but it doesn't find it...
Please help me,
Thanks in advance
Antonio

Hi all
have any one some information about ORARPP (Oracle Reports Remote Printing) ???
I should print directly, my desname should be a printer.... could any one help me???
Thanks in advance for your support...
Antonio

REP - 300 Error while executing report from Application

Hi,
I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.

looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.

Problem in running oracle report from form 10g Version 10.1.2.0.2

Hi All,
I am facing problem while running the report from forms 10g getting FRM-41219
For this i am using the following procedure :
PROCEDURE RUN_REPORT IS
L_RUN_TEXT VARCHAR2 (2000);
L_USRID VARCHAR2 (100);
L_PASSWD VARCHAR2 (100);
L_DESNAME VARCHAR2 (100);
FILE_OUT_PUT VARCHAR2(200);
REP_STATUS VARCHAR2(20);
REP_NAME VARCHAR2(50);
PL_ID PARAMLIST;
REP_URL VARCHAR2(2000);
V_REP VARCHAR2(200);
BEGIN
display_me('RUN_REPORT');
-- CALL THE FOLLOWING FUNCTION, IN WHICH USER CAN WRITE HIS OWN CODE.
-- THE PROCEDURE CAN BE MADE LOCAL TO THE SPECIFIC FORM AND WRITE THE CODE.
-- IT SHOULD RETURN 'Y', IF YOU WANT TO PROCEED WITH THIS RUN_REPORT
-- PROCEDURE.
IF NVL (RUN_REPORT1, 'Y') = 'N' THEN
RETURN;
END IF;
COMMIT_FORM;
IF (GET_APPLICATION_PROPERTY (OPERATING_SYSTEM)) = 'UNIX' THEN
L_DESNAME := 'LP';
ELSE
L_DESNAME := NAME_IN ('REPORT_TITLE.F_FILE_NAME');
display_me(L_DESNAME);
END IF ;
/* SETTING THE REPORT OBJECT PROPERTIES */
/* G_PRAM1 IS THE NAME OF REPORT ****/
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_SERVER,'172.18.76.34');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_FILENAME,:GLOBAL.G_PARAM1||'.REP');
display_me(':GLOBAL.G_PARAM1 '||:GLOBAL.G_PARAM1);
PL_ID := GET_PARAMETER_LIST ('REP_PARA');
IF NOT ID_NULL (PL_ID) THEN
DESTROY_PARAMETER_LIST ('REP_PARA');
END IF;
PL_ID := CREATE_PARAMETER_LIST('REP_PARA');
ADD_PARAMETER (PL_ID, 'DESTYPE' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.RAG_DESTINATION') );
ADD_PARAMETER (PL_ID, 'DESNAME' , TEXT_PARAMETER, L_DESNAME);
ADD_PARAMETER (PL_ID, 'COPIES' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.F_NO_COPY') );
ADD_PARAMETER (PL_ID, 'ORIENTATION', TEXT_PARAMETER, 'LANDSCAPE');
ADD_PARAMETER (PL_ID, 'MODE' , TEXT_PARAMETER, 'BITMAP');
ADD_PARAMETER (PL_ID, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
ADD_PARAMETER (PL_ID, 'PARAM' , TEXT_PARAMETER, NAME_IN ('IBP_REPORT_PARAMETER.F_REP_SEQ') );
ADD_PARAMETER (PL_ID, 'P_COMP_CODE' ,TEXT_PARAMETER,:GLOBAL.G_COMP_CODE);
display_me(':GLOBAL.G_COMP_CODE '||:GLOBAL.G_COMP_CODE);
REP_NAME := :GLOBAL.G_PARAM1||'.REP';
display_me('REP_NAME'||REP_NAME);
V_REP := RUN_REPORT_OBJECT('REPOBJ');
display_me('V_REP '||V_REP);
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
display_me('REP_STATUS'||REP_STATUS);
WHILE REP_STATUS IN ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
END LOOP;
IF REP_STATUS = 'FINISHED' THEN
REP_URL:='/REPORTS/RWSERVLET/GETJOBID'||SUBSTR(V_REP,INSTR(V_REP,'_',-1)+1)||'?'||'SERVER=172.18.76.34';
display_me('REP_URL '||REP_URL);
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
ELSE
MESSAGE('ERROR WHEN RUNNING REPORT');
END IF;
END;
Which is called on a button , can any body share there idea to help out
Warm Regards
Ashutosh

Yes, I have replace the userid with scott/tiger@orcl with i6menu/i6menu@vbs and also replace the OAS server's name as you have suggested.
declare
REP_URL varchar2(2000);
begin
REP_URL:= '/reports/rwservlet?userid=i6menu/i6menu@vbs&report=testrep_10g.rdf&desformat=pdf&destype=cache&paramform=no';
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
end;
I had the 2nd code also but both r not working on my machine ......... !!
I have made the following setting on my machine:
1. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->FORMS_PATH ->
Values is : D:\vision_soft\VSS\exe
2. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->REPORTS_PATH ->
Values is : D:\vision_soft\VSS\exe
3. Entry made in the DevSuiteHome_1\forms\server ->default.env
FORMS_PATH=D:\vision_soft\VSS\exe
4. Entry made in the DevSuiteHome_1\reports\confr ->rwservlet.properties
#SERVER= rep10
As my forms is working well & but the report are not able to call.
Could you please let me know is there is any other mandatory setting required for the report 10g.
Regards,
Ashutosh

Run Report from Forms

I need help!!!Can anyone tell me...
1)how to start a report from Forms?
---The report is already attached to Object Navigator
---I made a WHEN_PRESSED_BUTTON
and the Trigger for this button like this.....
DECLARE
rep_id REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
rep_id := find_report_object('StatusReport');
SET_REPORT_OBJECT_PROPERTY(rep_id,report_desformat,'PDF');
SET_REPORT_OBJECT_PROPERTY(rep_id,report_execution_mode,runtime);
SET_REPORT_OBJECT_PROPERTY(rep_id,report_comm_mode,synchronous);
SET_REPORT_OBJECT_PROPERTY(rep_id,report_destype,screen);
v_rep := RUN_REPORT_OBJECT(rep_id);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED'
then message('Report executed');
else message('Error! The Report can not be executed');
end if;
END;
Wenn I push the button I get....
<<<<Cannot find report: invalid ID>>>>>>
2)How to make a list as result of a select(for example
the result of-> select s_v_insert_date from status_values)In this list I have to use WHEN-MOUSE-DOUBLECLICK for defining a bindvariable before the report starts?
3) How to start from forms an sql script?
4) Is there a Forms Documentation?
many thanks,nona

This forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10

FRM-41214 unable to run report from forms with parameters

Hi all,
I am unable to run a report from forms if I pass parameters. Report is running fine in reports builder and in url if I access the report straightly.
I used set_report_object_property to pass the parameters.
Any clues to solve this problem?
Priya

Hi Jeneesh,
Code is below:
myreport1 :=find_report_object('MYREP');
reportdata := Get_Parameter_List('reportsdata');
IF NOT Id_Null(reportdata) THEN
Destroy_Parameter_List( reportdata );
END IF;
reportdata := Create_Parameter_List('reportsdata');
Add_Parameter(reportdata, 'account_number', TEXT_PARAMETER, :parameter.account_number);
     /* Setting the properties into Report Object */
     SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_DESTYPE, CACHE);
     SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_DESFORMAT, 'htmlcss');
     SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_SERVER,vc_reportserver);
               SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_FILENAME, 'C:\priya\forms\EmcySummary.jsp');
          SET_REPORT_OBJECT_PROPERTY(myreport1,REPORT_OTHER,'account_number='|| :parameter.account_number);
     /* Value of v_rep identifies the report that is currently running either locally or on a remote report server */
     vrep := RUN_REPORT_OBJECT(myreport1,reportdata);
/* Checking for Report Server is started or not, if not throw an exception else proceed */
     if vrep = vrep||'_0'then
     raise form_trigger_failure;
end if;
     vjob_id := substr(vrep,length(vc_reportserver)+2,length(vrep));
     vrep_status := REPORT_OBJECT_STATUS(vrep);
     /* Checking the status of the report */
     WHILE vrep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
vrep_status := report_object_status(vrep);
END LOOP;
/* When the report status is successful then report is generated in Web */
     IF vrep_status = 'FINISHED' THEN
     --     COPY_REPORT_OBJECT_OUTPUT(vrep,v_tempstorage);
          WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
     END IF;
---Any clues?

How to run report from forms

hi all,
i have tried to run report from forms using below codig(got from online help)
DECLARE
 repid REPORT_OBJECT;
 v_rep VARCHAR2(100);
 rep_status varchar2(20);
 v_host varchar2(100):= 'localhost';
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
 repid := find_report_object('REPORT27');
 v_rep := RUN_REPORT_OBJECT(repid);
 rep_status := REPORT_OBJECT_STATUS(v_rep);
 if rep_status = 'FINISHED' then
 message('Report Completed');
 copy_report_object_output(v_rep,'E:/Rep/local1.pdf');
-- host('MOZILLA E:/Rep/local.pdf');
-- WEB.SHOW_DOCUMENT('http://192.168.0.160:1521/reports/rwservlet/getjobid'||
-- substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
 else
 message('Error when running report.');
 end if;
 -- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
 v_port := '8889';
ELSE
 v_port := '8889';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=repserver';
v_parameter_string := v_parameter_string||'&report= E:\AGE_NoELIGIBLEReport.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
REP-110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
but i hav report in e:\ then why its getting?

Hi,
I suggest you not to use the "E:\" directory letter, but the REPORTS_PATH instead.

from the Online Help


On Windows, edit environment variables through the Registry Editor (Start > Run > Regedit).


On UNIX, edit environment variables by revising and running the shell script that defines the initial default values (reports.sh). If you do this, be sure to keep a backup of the original, unaltered reports.sh file.


Regards
JeanYves

Transfer executable report from one server to another

hi all,
How to transfer executable report from one server to another?
please reply fast
its urgent
thnx in advance

Kush,
To transfer a object from one server to another server it should be assigned to a package ie Dev Class so that a transport request can be created.Once the request is created we will release it using SE09 and then ask the basis consultant to move the request from Dev to Quality and then Dev to Production.
$TMP objects are called as local objects and can't be transported.
K.Kiran.

Running reports from forms on the web

On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.

S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null

Report from form

Hi,
i called report from form with following and gives the
error
REP-0100 Unable to open the file
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
repid := FIND_REPORT_OBJECT('DUMMY_REPORT');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
Thanks.

Hi,
this tells you that the Reports Server cannot find the physicale reports file. Please see
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Frank

How to call jsp web report from forms 9i

Dear fellows,
How can i call a jsp report from forms 9i.
Thanx
Mochoo

Use web.show_document instead of Run_Report_Object. If the jsp contains a paper layout you can still use Run_Report_Object, but you have to specify the filename extension .jsp along with the filename.

Calling a report from Form 6i

Hi,
I want to call a report from Form 6i at run time. And I write the following code in When Buttton Press trigger . when I press the button it will gives no response.
declare
     x report_object;
     y varchar2(100);
begin
     x:=find_report_object('billform');
     y:=run_report_object(x);
end;
for more information , path of my report is: C:\REP\billform.rdf
please send me the solution of this problem
E_mail: [email protected]
Shahzad

hi,
now i am using the following code in when button press trigger. if u give me ur e_mail address i will send u FMB and RDF files used for Scott/tiger EMP table for the sample.
declare
repo_Para     ParamList;
BEGIN
repo_Para:=Get_Parameter_List('Report_para');
IF not Id_null(repo_Para) THEN
     destroy_parameter_list(repo_para);
end if;
repo_Para:=Create_Parameter_List('Report_para');
Add_Parameter(Repo_para,'PARAMFORM',TEXT_PARAMETER,'No');
Add_Parameter(Repo_para,'MAXIMIZE',TEXT_PARAMETER,'Yes');
     Add_Parameter(Repo_para,'BDATE',TEXT_PARAMETER,:BLOCK3.a_dptno);
     Add_Parameter(Repo_para,'EDATE',TEXT_PARAMETER,:BLOCK3.b_dptno);
     RUN_PRODUCT(REPORTS,'c:\apu\DDATE.rep', SYNCHRONOUS,
          runtime, FILESYSTEM,Repo_para,NULL);
end;
BDATE & EDATE are two user parameters created in report.
when i press the button in form pass parameters the report will be called but no data will be display but when i directly run reprot from report buider and pass same values of BDATE & EDATE it will show data.
please give me ur e mail address or help me for this problem
best regards,
shahzad

Calling report from forms :- need to disable file menu in report previewer

Hi all,
I am using report 6i and forms 6i
I am invoking report from forms
if report_status='N' then I want to disable the file menu in report previewer
Is it possible to disable and enable file menu in report previewer
Please help
Thanks
:8}

i got way

Calling Report From Form To Many Destinations

Hi
I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object.
I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and file what is the best way to distribute the report?
I could call my procedure for each destination but that seems a bit unefficient since the report would be created many times, is there another way?

what about adding a drop-down-list near your report-button where you can choose the destination?
when you click the report-button you simply read the value selected in the drop-down-list and send it to your reports-server too.

Calling Report from Form Error ORA-06508

Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
     list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
Thanks

Hi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id                Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status      VARCHAR2(100);
repsvr                          varchar2(21) := 'myserv';
userid                         VARCHAR2(100);
pass                          VARCHAR2(100);
Host                    VARCHAR2(100);
BEGIN
userid          := Get_Application_Property(USERNAME) ;
pass          := Get_Application_Property(PASSWORD) ;
Host          := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF&paramform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S

Execute report from local drive from Forms 9i Apps

Similar Messages

Maybe you are looking for