Exit button not working in exe file made with Aggregator

Hi,
I created an .exe file using Aggregator in full screen mode but the exit button on the skin doesn't work. When I click the exit button, the dislay hiccups (wobbles a bit) but the file keeps playing and doesn't close. This is especially problematic since this occurs in full screen. The only way to exit is by hitting the Escape key on the keyboard. The exit button works fine in individual .exe files of the modules; it's just in the aggregated .exe file that the exit button doesn't work. Is there anything special I need to do to make the exit button work with Aggregator?

Hi, this is more J2EE related stuff, SAP came with a solution but is taking ages to get the next page after the "Exit" button is pushed:
Go to VisualAdnmin >server(n) >Services >Configuration Adapter >
(Right side Pane) webdynpro >sap.com >tcwddispwda >PropertySheet
default.
Edit the property sheet and change the custom value for the property
"sap.locking.maxWaitInterval" to 200.
Note 1113811, explains why these kind of errors happen.
I still waiting for a better solution from SAP.
Cheers

Similar Messages

Exit button not working can u say how to do that?

Exit button not working can u say how to do that?

Which version are you using, please the exact number? Exit depends also on the browser, not only on Captivate.

Cancel and Exit button not working

Dear Experts,
<u>Cancel and Exit button not working</u>
I am calling a screen from inside a report program
using SET SCREEN 9000.
2 of the date fields(start date end date)
on this screen are Mandatory.
I am not able to Come out of this screen 9000 using
CANCEL or EXIT button
without giving a date entry in both of
Mandatory fields (start date end date).
Can someone help me with a solution?
Appreciate your valuable help;
Points assured
Thanks,
Aby Jacob

Hi..
To avoid this problem you have to use AT EXIT-COMMAND Module.
1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
2. In the PAI of the Screen Call this module.
   MODULE EXIT_SCREEN AT EXIT COMMAND.
3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
   MODULE EXIT_SCREEN INPUT.
       CASE OK_CODE.
      WHEN 'EXIT' .
            LEAVE TO SCREEN 0.
      WHEN 'CANCEL'.
      ENDCASE.
   ENDMODULE.
This will surely work.
<b>reward if Helpful.</b>

Flash play installation not work - The exe file deelete automaticly and the process is still running

Flash play installation not work - The exe file deelete automaticly and the process is still running

Why i get no answer?

Exit button not working in MS Explorer

Hi. The exit button in our Captivate courses are not working
all of a sudden. They work in FireFox but in MS IE. We are using
Capivate 2.0. IE version is 6.0.

Hi Apparo,
In onAction method of the Exit button, a call is made to the TargetExitApplication as follows:
fpm.navigate(wdThis
.wdGetFcNavigationInterface()
.getNavigationTargetExitApplication());
Also, the Exit button does work in the Address Overview/Edit/Review Page, but not in W-4 Tax and Benefits Enrollment.
Any help on this problem !!!
Regards,
Adren

Exit Button not working in ESS

Hi All,
We have configured ESS in our landscape. When I go to any Overview/Edit/Review Page (in W-4 Tax, Add/Change dependents etc..), the Exit button which is present is not working. When I click the Exit button, it doesn't exit the current view, but instead stays at the current location.
Can anyone tell me the reason for this strange behaviour? Also, where should I make the code level changes for the Exit button work.
Any kind of help would be greatly appreciated.
Regards,
Adren

Hi Apparo,
In onAction method of the Exit button, a call is made to the TargetExitApplication as follows:
fpm.navigate(wdThis
.wdGetFcNavigationInterface()
.getNavigationTargetExitApplication());
Also, the Exit button does work in the Address Overview/Edit/Review Page, but not in W-4 Tax and Benefits Enrollment.
Any help on this problem !!!
Regards,
Adren

Exit button not working in Captivate 7 published output

Hi. I am using Capivate v7 and am experiecing this problem with published output:
I am using an Exit button that runs the standard javascript code
javascript:window.close()
so that the user can exit the presentation. The button works fine when I test out the presentation using Internet Explorer 8, but when I generate an output and try running the .swf file, the button does not work.
How do I get an Exit button to work for the .swf output?
Thanks,
- Michael Fekete

Yes, the close X does work 100% of the time. That's because the browser itself is just a window in the operating system. And you are commanding the window to close.
And you might find yourself asking why that would work while the Exit button fails. And it would be that it's a security issue. Security prevents the window from closing because if a web site was nefarious, it could actually trap you by making changes and quickly closing the window and preventing you from browsing elsewhere.
It's simple to turn off the Exit button. Just click Project > Skin Editor and clear the Close checkbox.
Cheers... Rick

Exit button not working on Personal Information DC

Hi,
The exit button in Personal Information ( Home Address & Phone ) DC is not working. The issue is when I click on Exit button the screen is getting refresh, but no action is taken place.
Is the issue related to SPRO Configuration? Because the respective method is calling from FPM -fpm.navigate(wdThis.wdGetFcNavigationInterface().getNavigationTargetExitApplication());
So I tried by writing following method, but when I click on Exit button from Edit & Review views, the page is opening in a new window instead of opening in a content area where as Overview page is opening in Content Area.
WDPortalNavigation.navigateAbsolute
                          ("ROLES://portal_content/abc/hr/ess/iviews/com.abc.hr.ess.iview.area_personal_information",
                 WDPortalNavigationMode.SHOW_INPLACE,
                 WDPortalNavigationHistoryMode.NO_HISTORY,
                 null);
Also I would like to know what are the configurations we need to do in SPRO with respect to ESS & MSS.
Thanks in advance to resolve the issue.
cheers
dev

Create an alert with name close_alert write message of you choice give lable to button1 and button2 Yes and No respectively.
On your exit button write below code
declare
     al number;
begin
     al:=show_alert('al_close');
     if al=alert_button1 then
          exit_form(no_validate);
     end if;
     end;Edited by: XeM on Apr 6, 2013 2:39 AM

Exit button not working when entering wrong date

how do I get the message not to appear by day Invalid (Frm-50004) in forms

dear Shrikant,
i have one item start_date whose data type is Date and format mask is DD/MM/RRRR ,
when i m entering worng date it is showing below message which i kept on ON-ERROR trigger of start_date item with an error code 50004 ;
"FRM-50004: Day must be between 1 and last of month."
as i m entering wrong date i want to exit my form but my exit button is not working properly.
The message appears several times, about 3 or 4 times, because the focus is on the text item to the date, and is firing the trigger ON-ERROR, debugging the code, you notice that after the message back running the line "IF", because the error frm-50004 can not be erased, is giving this error all the time because the focus is on her text item!
i have kept my push buttons mouse and keyboard navigation property to "NO".
then also it is not working tell me if any solution is there.

Exit Button not working through Workflow

Hi,
I'm using a Custom Business Object for triggering my workflow. I've used own transaction and used in my method. The workflow triggers and works properly. My problem is when i run the transaction code manually and click on 'Back' or 'Exit' button, it leaves program and comes out. But when i go through the workflow and execute from my inbox, it doesn't come out of the tcode i.e it doesn't leaves the program. It remains in the same screen...
Can anyone know what is the problem ??
Do i need to end the event or something have to be done for exit ?

You wouldn't happen to have a loop there, and steps that continue within a dialogue session, so it is actually new workitems you keep executing?
Perhaps not, so the problem may be caused by the way you are calling the code that presents the user interface. When you submit a program and the program tries to leave the screen it will go to the screen it came from. But it didn't really come from a screen. I believe that may be your problem in this case.
For a synchronous task I would recommend calling a function module - the function module can open a screen, or do whatever you need. The main point is that the function module can return a value to the method which can be used to determine whether you should call the macro exit_cancelled to indicate that the user cancelled execution.

Exit button not working Captivate 7 output to HTML5 and SWF

I have several courses developed in Cp 6.5 that do not have this issue and are currently running on Taleo LMS.
I've built a test course with 6 (mostly blank) slides, including two quiz questions. On the final slide I have placed a Finish Course button with On Success: Exit action. The project end options are set to close project and I've included an On Exit: Exit action on the final slide. The Finish Course button successfully closes the browser window in Preview in Browser (IE9) and Preview HTML5 output modes.
I then published the course to both HTML5 and SWF output formats with scalable HTML selected. Once I uploaded the course to the LMS and tested it, the Finish Course button does not close the browser window. I've tested in IE9, Firefox, and iPad, and it doesn't work on any of these. I've also tried including the built in exit button on the playbar, and it doesn't close the window either. At the final slide, after clicking the Finish Course button, the slide fades to white and then stops.
The LMS reports that the course is complete; I thought maybe it was an issue with the settings in the LMS course, however I have several other courses that were developed in Cp 6.5, published to the same LMS with the same "Exit" button on the final slide, and I have mirrored every course setting that has worked in the past.
Any suggestions as to what could be keeping the window from closing?
Thanks,
PV

Why does there need to be a button used now when in CP 6 and 6.5 it worked seamlessly? Will this be fixed by Adobe and when?
Adam Lynch
Senior Media Specialist
Project Lead The Way, Inc.
3939 Priority Way South Drive, Suite 200
Indianapolis, IN 46240
phone: 317.669.0845 | mobile: 518.469.7617
fax: 317.663.8296
www.pltw.org<http://www.pltw.org/>
Preparing students for the global economy. Now even earlier.
PLTW Elementary coming fall 2014. Click here to view the trailer<http://www.youtube.com/watch?v=rikLnSAoTpQ>.
Confidentiality Notice: The information transmitted is the property of the sender and is intended only for the person or entity to which it is addressed and may contain confidential and or privileged material. Statements and opinions expressed in this e-mail may not represent those of Project Lead The Way, Inc. Any unauthorized review, retransmission, dissemination and other use of, or taking of any action in reliance upon, this information is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and delete the material from any computer. If you are the intended recipient but do not wish to receive communications through this medium, please so advise the sender immediately.

ESS - Time Accounts- Exit button not working

We have implemented ESS Business Package, the Time Accounts application's Exit button is not working.
When we click on Exit, it is not doing anything. In Development env it is working fine, but when it comes to quality it is not working.
suggest me if we can solve this problem.

Hi Kiran,
We had a same problem with "Exit" button for "Benefits Enrollment" in both dev and quality systems. As a workaround we redirected to the specific iView using WDPortalNavigation.navigateAbsolute on clicking "Exit button".
Hope this helps.
Regards,
Adren

Captivate 4 SCORM not working, Exit Button Not working

Hi All-
I hope somebody can help me out because I am at the end of my rope with Captivate.
I have a project that is in the final stages, I'm attempting to publish it to our LMS and it is not tracking properly, it is initializing the LMS and it is recording a "Started" status, but I can not get the completion status to work properly.
I really don't want to include a quiz at the end so these are the settings I have used:
LMS Standard: SCORM 1.2
Report Status: Complete/Incomplete
Report To LMS As: Percent
Choose report Data: User Access Only
Reporting Level: Interactions and Score
I have tested every possible setting I can think of and the bloody thing will not work!
Somebody please help me, because I do NOT want to have to start this over with Articulate!

Hi Nathan
In addition to the other advice, I believe that you need to have at least one scorable object in order for the reporting to work. For example, sometimes folks need a simple acknowlegement that the content has been viewed. I believe this is the case with SOX compliance. In cases like these, you insert a simple Button object the user clicks. Configure a quiz. You don't need actual question slides. You configure the button to report back the click.
I didn't see anything about the Exit button, but the Exit button is unreliable at best. If you are clicking the Exit button and it's not working for you, take a look at the info below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Custom Exit Button not working

I am using Captivate 6. I have a 'Save & Exit' button. On success I have javascript being executed and the code being: javascript:window.close()
When I preview in my web browser (chrome) nothing happens when I select this button. Any help?
I have attached a screen shot.
Many Thanks.

Hi Mike
Just for testing purpose, create a new slide in your project or you can create a new project and in the new/blank slide insert a button. Apply the javacript window.close(); or window.close()
Preview the project or web browser or publish and test the same in the web browser and then observe, you are facing the same issue or not. If it works, then change the javacript which I provided to you.
Thanks
VJ

Exit button not working in Safari

Has anyone run into this, specifically with Safari? I created a module in Captivate 8, that has a close button on the skin. The module has been uploaded to my clients LMS and it closes no problem on all other browsers except Safari. I tried creating a button on the last page of the slide as well with the "exit" action and that doesn't seem to work either in Safari. Does anyone have an idea how to fix this issue?

I tried an Exit button (clickbox associated with the action Exit). It freezes Safari for about 10-15 seconds and then finally closes the browser tab.

Exit button not working in exe file made with Aggregator

Similar Messages

Maybe you are looking for