Export dump only 1000 tables from the schema which contains 3000 tables.

Hi,
I have an requirement to export the dump only with particular 1000 tables from the schema which contains 3000 tables.
As I want to take the dump, I need to mention the List of tables in "TABLES" Parameter. But syntax won't allow for 1000 tables.
Kindly guide me on this to proceed further to take the dump of only particular 1000 tables.
Thanks in advance.
Thanks,
Orahar.

I have an requirement to export the dump only with particular 1000 tables from the schema which contains 3000 tables.
As I want to take the dump, I need to mention the List of tables in "TABLES" Parameter. But syntax won't allow for 1000 tables.
Kindly guide me on this to proceed further to take the dump of only particular 1000 tables.You haven't mentioned the oracle release version.
if you're using 10g, you could use datapump export/import to achieve this. Not a straight way.
Check Metalink Export/Import DataPump Parameters INCLUDE and EXCLUDE - How to Load and Unload Specific Objects - 341733.1
Under section 9. Exporting or Importing a large number of objects.
HTH
-Anantha

Similar Messages

Find the schema which contains all these tables

In my DB, only SCOTT has all the three tables EMP,DEPT, BONUS. There are schemas which have either one or two of these tables but only SCOTT has all these 3 tables.
To find the schema which contains all these *3* tables. I tried the below mentioned queries which gave the wrong answers.
1.
select TABLE_NAME, owner from dba_Tables where table_name IN ('EMP','DEPT', 'BONUS')-- will return any schema which has any of these tables. So, wrong result
2.
select TABLE_NAME, owner from dba_Tables where table_name = 'EMP' AND TABLE_NAME='DEPT' AND TABLE_NAME= 'BONUS'-- Wrong result because it is mutually contradictory. As AP has mentioned below, A table_name cannot be equal to all the three tables .
Edited by: GarryB on Dec 22, 2010 7:56 AM

Hi,
GarryB wrote:
Thanks everyone. So, this means that this seemingly simple query cannot be written with just a plain AND , OR . Right?You're right. Every query needs SELECT and FROM, for example.
What's wrong with Solomon's simple solution?
Whatever you don't like about it, I'm sure there's another approach that doesn't have the same problem, even if it is slower and more complicated.
As AP pointed out, no one row has all the information you need to decide if that row will be part of the result set or not.
You need something that can make a decision based on the data in multiple rows.
GROUP BY, like Solomon suggested, is the easiest and most efficient way I know of.
Anything that GROUP BY does can probably be done by analytic functions. In this case, it will be more complicated and slower, but you can get the same results.
A self-join, as user13524665 demonstrated, is another way.
You could also get the results you want using EXISTS-, IN-, or scalar sub-queries, all of which would be even more complicated, and scale just as poorly, as a self-join.
CONNECT BY, recursive sub-queries, MODEL, and XML functions can also look at several rows at the same time. I don't believe you want to read and test soltuions for all of these any more than I want to write all of them. Solomon gave a good solution for your original problem. If you want to add some extra restrictions to your problem (such as "I can't use ... or ...") explain clearly what those restrictions are, and why you need them.

I have my email set at 1000 messages and it is only holding messages from the last four days, any ideas

I have my email set at 1000 messages and it is only holding messages from the last four days, any ideas

With an exchange account, it's "Mail Days to Sync":
http://support.apple.com/kb/HT2723

How to extract all keys (PK, FK) and constraints from the schema?

hi,
How to extract all keys (PK, FK) and constraints from the schema?Thanks!

I have no idea about any tool which only extract the DDL of constraints.
In oracle 9i or above you can use DBMS_METADATA to extract DDL of a table which also shows contraints defination.
You can take the tables export without data and use databee tool to extract the DDL.
www.databee.com

How to suppress compiler errors without excluding database objects from the "Schema Compare" tool (using VS2013/SSDT)

Hi,
In short: How to suppress compiler errors without excluding the object from the "Schema Compare" tool ??
A bit longer:
We have a SQL Server 2008 project in Visual Studio 2013 running SQL Server Data Tool.
An old database, with a lot of history in, has been imported into SSDT and there are many syntax errors preventing the project from compiling/running. An typical error is: "SQL70001: This statement is not recognized in this context".
Running the "faulty" scripts on the server, executes just fine. I understand that there are syntax errors and they should be rewritten, but it's not gonna happen just like that - it is a slow process over a long period of time.
I know it is possible to change Build Action to None, but that also exclude the object from appearing in the Schema Compare function/window.
So - how to ignore some compiler errors and still having the objects to appear when doing "Schema Compare" ??
Thank you in advance.

Hi Steven,
Thanks for your comments.
Well, it sure does help in the future, but right now i would prefer the other way - to suppress some errors and still allow the scripts to build.
The thing is that if we "rewrite" the objects into create scripts, then we have a huge test job ahead of us + the database environments (PROD vs DEV and UAT) does not share the same AD or DB users and therefore grants is lost if dropping/creating
objects, right!
If you drop a object before creating it, the drop will also drop the roles and grants and since they don't share user table, the create will not be able to add the permissions again. There might be a solution to that, but it is going to be very complicated
for some newbies like us. We need something we can trust.
BR
Peter

Why does my iPad 2 only store emails from the last 3 or 4 days?

Why does my iPad2 only store emails from the last 3 or 4 days? I have it set up to store the last 1000 messages but I can't seem to keep them...

What is the account type - POP, IMAP, or Exchange?
If a POP account, are you also accessing the account with an email client on your computer? If so, what is the account setting for removing messages from the server after being downloaded with the email client used on your computer for accessing the account?

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download from other stores. Why do am i forced to try to nread Japanese when I have selected English as my language. The price for Downloads is no different and even if it was I am happy to pay. This also applies to Movie rental which is crazy and extremely restrictive. I a supposed GLOBAL community why does Apple do this.

You can buy ONLY from the itunes store of your country of residence (As proven by valid billing address of credit card) and ONLY while inside the borders of that country.
These are the terms of the itunes store.

C4650 Will only print black from the internet. MS Word and PS will not print in black but has color.

Before you think I just haven't tried anything, let me run you down with the whole lot:
-HP PhotoSmart C4650
-Windows Vista
-Problem: My printer won't print in black --but-- this only goes for Microsoft applications it seems. If I have a page of text in black, when printing from MS Word, the page comes out blank, however the printer is actually "printing" back and forth. IF, however I print from my browser, from email, or a webpage, picture, google docs, etc, black prints *just fine.* So far this holds true for both MS Word and PhotoShop CS5. Issue: Black ink simply doesn't print from any program other than a browser.
-NO. The cartridge isn't empty. NO. It's not incompatible. NO. The cartridge head isn't dry and I am not going to soak it in water. This is a new cartridge. It's the official HP brand.
I've done a search and I've found that a few people seem to have this "only print from the internet" problem, however none of these was solved. The only advice that an HP support member gave to one of them is to "install XP service pack 2" however.. I am not running XP. A few other people get the opposite issue where they can only print color from the internet and not from the computer's applications.
I don't know much about printers but it sounds like some kind of driver issue. Yes. I've already searched for, uninstalled and reinstalled drivers. Whenever I have to print something, I now try to open it up in my firefox just so I can be able to print black. It's quite the hassle. Almost seems like some kind of ploy to cause people to buy new ink cartridges when it's not really empty.
-Yes, I have also uninstalled and reinstalled the printer.
-Updated my windows (although idk how that would help. But I know it's going to be a suggestion anyway.)
Is there any known fix or should i chuck it off the balcony and go get a lexmark?

Hi lisaloyd,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having issues printing in colour. I also see that you are using a Lexmark printer. I would advise you to get into contact with Lexmark so that they can show you how to navigate through the printing software that they provide.
Please click on the following link to get to Lexmark Support.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?

I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?

go to system preferences - security and privacy - under allow applications downloaded from - click on anywhere.

TS3899 I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month o

I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?

I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?

Is it possible to only install Color from the FCS3 suite?

Is it possible to only install Color from the FCS3 suite? If so, what is the correct procedure?
thanks

I'm not sure whether you can install it on its own or whether you will need FCP as well.
Open the installer, go through it and you will come to a page where every app and its media is listed.
Deselect everything except Color and continue with the installation.
If it refuses you will have to go back and select FCP as well.

How to get trigger code from the schema into a file

Please help me in getting code of any trigger from the schema, without using any data dictionary views.

In fact you can get the trigger code by using tools like toad,sql developer
But all are using the data dictonary view to get the code .

How to fetch only WebI reports from the repository

How to fetch only WebI reports from the repository, where in we have Deski reports also in the repository.. any macro??

here is the query to fetch only webi reports:
Open Administration Launchpad (.Net / Java) from:
Start >> All Programs >> BusinessObjects XI Release 2 >> BusinessObjects Enterprise >
Click on the 'Query Builder' under 'Administration Tools' on the left pane.
Logon to Query Builder using Enterprise Administrator credentials.
Run the following query for Web Intelligence Reports:
SELECT SI_ID, SI_NAME, SI_OWNER FROM CI_INFOOBJECTS WHERE SI_KIND='WEBI'
Thanks,
Srikanth.

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

I am doing a photo book but can only place picture from the last 12 months or last import. How can I access other pictures? Any advice?

I am doing a photo book but can only place picture from the last 12 months or last import. How can I access other pictures? Any advice?

You access them in the event they are in or under Photos or from an album if they are in an album - simply drag them to the book project in the source pane on the left
LN

Export dump only 1000 tables from the schema which contains 3000 tables.

Similar Messages

Maybe you are looking for